Pixma MG6220 Missing Data
Here is the story;
I'm thinking this happened after a deep cleaning.
After doing my taxes on the PC I went to print off some copies. (personel records & to mail)
The first set printed fine. The next set however printed out a blank form. The form is perfect. It is just missing all the personnel data including bar codes. Thinking this was a program failure I tried to print a PDF file from an email attachment.
Again, Some of it printed fine other not at all.
Thinking the nozzle might be cloged, I ran the nozzle clean then printed the check page.
To my surprise, the top section of the test page (hoizontal & verticle lines) did not print! Even though the black boxed letters and the colored bars printed perfectly
Any ideas on what to try next?
Thank You!
Pat
Hello!
When the nozzle check is missing any of the bars, we suggest running through one more cleaning, and one or two deep cleanings. If the nozzle check does not improve, the printer may requires service; however, the best thing to do would be to get in touch with our technical support team at http://bit.ly/Phone_Supportfor further assistance. They will let you know if any more options are possible and where to go from there.
Thanks!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Similar Messages
-
Help needed with missing data problem in CRVS2010
We recently upgraded the reporting engine in our product to use Crystal Reports for Visual Studio 2010 (previously engine was CR9). Our quote report, which has numerous subreports and lots of conditional formatting, started losing data when a quote took more than a single page to be printed. We knew the SQL results included the data, but the report was not printing those lines at all or sometimes printing a partial line. In addition, the running total on the report would exclude the lines that were being missed on the next page. In one example submitted by a customer, 3 lines were skipped between pages.
I think I have identified two potential issues that document the possibility of data not being included in the report.
The first potential issue is an issue with the "suppress blank section" option being checked. This issue is supposedly fixed with ADAPT01483793, being released someday with service pack 2 for CRVS2010.
The second potential issue is using shared variables. This issue is supposedly fixed with ADAPT01484308, also targeted for SP2.
Our quote report does not explicitly use shared variables with any of the subreports, but it does have several subreports, each in its own section that has the "supress blank section" option checked. We have other reports that use this feature, as well, and they are not exhibiting the problem.
One different thing about the quote report is that it has a section with multiple suppression options selected. The section has a conditional suppression formula, which controls whether the section is included at all within the report. The section also has the suppress blank section option selected. There are multiple fields within the report that are each conditionally suppressed. In theory, the section's suppress formula could evaluate to true, yet all of the fields within the section are suppressed (due to null values), and then the "suppress blank section" option would kick in.
The missing data only seems to happen when the section is not being suppressed, and at least one of the fields is being included in the report. If I clear the "suppress blank section" check box, and change the section formula to also include the rules applied to the fields in the section, the missing data problem seems to be resolved.
Is this related to ADAPT01483793? Will it be fixed in service pack 2?
If more details are needed, I would be happy to provide a sample report with stored data.Hi Don,
Have a look at the Record Selection formula in CR Designer ( stand alone ) and when exported to RPT format opening that report in the Designer also.
There's been a few issues with => logic in the record selection formula. It could be you are running into this problem. Look for NOT inserted into your selection formula.
Oh and SP2 is coming out shortly so it may resolve the issue. But if you want you could purchase a support, or if you have a support contract then create a case in SMP and get a rep to work with you to debug the issue.
If you have not try the Trial Version of CR 2011, put it on a VM-ware image or Test PC so you don't corrupt anything for production and have a look at and test it in that designer also. If you purchase a case and it is a bug then you'll get a credit back for the case.
Don
Edited by: Don Williams on Oct 26, 2011 7:40 AM -
Insert old missing data from one table to another(databaase trigger)
Hello,
i want to do two things
1)I want to insert old missing data from one table to another through a database trigger but it can't be executed that way i don't know what should i do in case of replacing old data in table_1 into table_2
2)what should i use :NEW. OR :OLD. instead.
3) what should i do if i have records exising between the two dates
i want to surpress the existing records.
the following code is what i have but no effect occured.
CREATE OR REPLACE TRIGGER ATTENDANCEE_FOLLOWS
AFTER INSERT ON ACCESSLOG
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
V_COUNT NUMBER(2);
V_TIME_OUT DATE;
V_DATE_IN DATE;
V_DATE_OUT DATE;
V_TIME_IN DATE;
V_ATT_FLAG VARCHAR2(3);
V_EMP_ID NUMBER(11);
CURSOR EMP_FOLLOWS IS
SELECT EMPLOYEEID , LOGDATE , LOGTIME , INOUT
FROM ACCESSLOG
WHERE LOGDATE
BETWEEN TO_DATE('18/12/2008','dd/mm/rrrr')
AND TO_DATE('19/12/2008','dd/mm/rrrr');
BEGIN
FOR EMP IN EMP_FOLLOWS LOOP
SELECT COUNT(*)
INTO V_COUNT
FROM EMP_ATTENDANCEE
WHERE EMP_ID = EMP.EMPLOYEEID
AND DATE_IN = EMP.LOGDATE
AND ATT_FLAG = 'I';
IF V_COUNT = 0 THEN
INSERT INTO EMP_ATTENDANCEE (EMP_ID, DATE_IN ,DATE_OUT
,TIME_IN ,TIME_OUT,ATT_FLAG)
VALUES (TO_NUMBER(TO_CHAR(:NEW.employeeid,99999)),
TO_DATE(:NEW.LOGDATE,'dd/mm/rrrr'), -- DATE_IN
NULL,
TO_DATE(:NEW.LOGTIME,'HH24:MI:SS'), -- TIME_IN
NULL ,'I');
ELSIF V_COUNT > 0 THEN
UPDATE EMP_ATTENDANCEE
SET DATE_OUT = TO_DATE(:NEW.LOGDATE,'dd/mm/rrrr'), -- DATE_OUT,
TIME_OUT = TO_DATE(:NEW.LOGTIME,'HH24:MI:SS'), -- TIME_OUT
ATT_FLAG = 'O'
WHERE EMP_ID = TO_NUMBER(TO_CHAR(:NEW.employeeid,99999))
AND DATE_IN <= (SELECT MAX (DATE_IN )
FROM EMP_ATTENDANCEE
WHERE EMP_ID = TO_NUMBER(TO_CHAR(:NEW.employeeid,99999))
AND DATE_OUT IS NULL
AND TIME_OUT IS NULL )
AND DATE_OUT IS NULL
AND TIME_OUT IS NULL ;
END IF;
END LOOP;
EXCEPTION
WHEN OTHERS THEN RAISE;
END ATTENDANCEE_FOLLOWS ;
Regards,
Abdetu..INSERT INTO SALES_MASTER
( NO
, Name
, PINCODE )
SELECT SALESMANNO
, SALESMANNAME
, PINCODE
FROM SALESMAN_MASTER;Regards,
Christian Balz -
Missing Data from Legacy System
Hello All,
My client went live end of January this year. They had a month of transaction data in their legacy system which they did not bring into SAP. Since this is their first year on SAP and recently implemented Extended Withhold Tax one month data is missing; when they run the 1099s at the end of the year they are going to be reported incorrectly.
How can we bring over that missing data from legacy system over to SAP without having to clear those invoices in SAP?
Thank You In AdvanceHi Shashi,
Have a look : <a href="http://www.box.net/shared/9tda040za6">Transferring Data with DB Connect</a>
<a href="http://sapbwneelam.blogspot.com">More Docs...</a>
Hope it Helps
Srini -
How can I connect dots across missing data points in a line chart?
Hi all!
I have a table in Numbers that I update every few days with a new value for the current date (in this case body metrics like weight, etc.), which looks something like this:
Column 1 Column 2 Column 3
Aug 16, 2011 87.1 15.4
Aug 17, 2011 86.6
Aug 18, 2011 86.1
Aug 19, 2011
Aug 20, 2011 85.7 14.6
Aug 21, 2011 85.3
Every once in a while there will be a missing value for a given date (because I didn't take a reading on that day). When I plot each column against the date on a line chart, there is a gap where there are missing data points. The line does not connect "across" missing data points. Is there a way to make the line connect across missing data points?
Thanks for any help. This thing has been driving me nuts!Leave your nuts in peace.
Don't use line charts but scatter charts.
These ones are able to do the trick.
Of course to do that you must study a bit of Numbers User Guide.
In column D of the Main table, the formula is :
=IF(ISBLANK($B),99999,ROW())
In column E of the Main table, the formula is :
=IF(ISBLANK($C),99999,ROW())
Now I describe the table charter.
In column A, the formula is :
=IFERROR(DAY(OFFSET(Main :: $A$1,SMALL(Main :: $D,ROW())-1,0)),"")
In column B,the formula is :
=IFERROR(OFFSET(Main :: $A$1,SMALL(Main :: $D,ROW())-1,1),"")
In column C, the formula is :
=IFERROR(DAY(OFFSET(Main :: $A$1,SMALL(Main :: $E,ROW())-1,0)),"")
In column D, the formula is :
=IFERROR(OFFSET(Main :: $A$1,SMALL(Main :: $E,ROW())-1,2),"")
In this table, select the range A1 … D5
and ask for a Scatter chart.
You will get what you need.
I asked that points are joined by curves
I just edited the parameters of Xaxis and Yaxis to get a cleaner look.
I repeat one more time that knowing what is written in the User Guides is useful to be able to solve problems with no obvious answer.
Yvan KOENIG (VALLAURIS, France) samedi 27 août 2011 15:59:20
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
SMS Transferring/downloading/backup : Is there a way to download/port the missing data/SMS to one iPhone without overwriting the new SMS on the newer iPhone? Here is my dilemma. My iPhone quit working and I couldn’t get it fixed as quickly as I needed to. I bought a used iPhone and started using it normally and downloaded the backup from itunes/icloud. There was a large gap in data where the first iPhone didn’t backup when I thought it had. I have SMS data on both phonesnow and I need them for a court hearing. I have since had the other iPhone repaired and working perfectly. Will downloading a backup wipe out the newer SMS data? I am nervous because I can’t lose the information or my case mey be compromised. Any “Real Help” including programs that work to accomplish this would be very helpful. Thank You in advance…
No, direct access to manipulating the phone's filesystem is not permitted for 3rd party apps in the iOS. It can't be done without hacking the phone, which you certainly don't want to do. The messages can be combined and viewed on your computer, but not on a single phone.
-
Where can I find a tutorial for the Canon Pixma MG6220
I am unable to make full use of the Canon Pixme MG6220 I purchased a few weeks ago. I am an 85 year old geezer and my old printer was pretty straight forward but had limited features whereas this Pixma 6220 is a great machine but I find it most intimidating to use some of its features and have had no luck in finding a tutorial online-------can anyone help me?????
I dont know how I did it: I have found the manual, but it's extremely confusing. I am 70, not quite as old as the questioner. I find this manual has too much content and I cannot find what I need (like almost every web page!).
We just bought the pixma MG6220 and have installed the driver on both our computers, and it's supposed to work wirelessly, and it does. Mine is a macbook air and we had to use the external drive to do the installation.
But when it came to scanning photos in order to add them to the digital ones, the scanner could only find my husband's PC, not my macbook. I understand that you cannot simultaneously use both computers to scan. Do I have to switch off the other computer to use mine? Or do I have to attach the laptop with a wire to the printer. My laptop is near the new printer, but the husband's PC and modem are further away - but they work. I have spent several hours trying to solve this, which should have a very simple answer, but can find nothing. I didn't understand 99 per cent of the content of the manual, which is very disempowering. Could it not "hide" the more obscure content and make it accessible via specific links. I do not want to plug in the external drive every time I want to use the scanner or printer (I lose the mouse function).
I also find it hard to navigate these community pages! What is tagging? -
How to Get Missing Dates for Each Support Ticket In My Query?
Hello -
I'm really baffled as to how to get missing dates for each support ticket in my query. I did a search for this and found several CTE's however they only provide ways to find missing dates in a date table rather than missing dates for another column
in a table. Let me explain a bit further here -
I have a query which has a list of support tickets for the month of January. Each support ticket is supposed to be updated daily by a support rep, however that isn't happening so the business wants to know for each ticket which dates have NOT been
updated. So, for example, I might have support ticket 44BS which was updated on 2014-01-01, 2014-01-05, 2014-01-07. Each time the ticket is updated a new row is inserted into the table. I need a query which will return the missing dates per
each support ticket.
I should also add that I DO NOT have any sort of admin nor write permissions to the database...none at all. My team has tried and they won't give 'em. So proposing a function or storable solution will not work. I'm stuck with doing everything
in a query.
I'll try and provide some sample data as an example -
CREATE TABLE #Tickets
TicketNo VARCHAR(4)
,DateUpdated DATE
INSERT INTO #Tickets VALUES ('44BS', '2014-01-01')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-05')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-07')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-03')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-09')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-11')
So for ticket 44BS, I need to return the missing dates between January 1st and January 5th, again between January 5th and January 7th. A set-based solution would be best.
I'm sure this is easier than i'm making it. However, after playing around for a couple of hours my head hurts and I need sleep. If anyone can help, you'd be a job-saver :)
Thanks!!CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'> -
SSRS 2008 R2 - Missing Data when Exporting to Excel or CSV (Row Count is 500)
Hey Folks,
When exporting SSRS 2008 R2 report to an csv or excel file not all the rows are being exported. Any suggestions on why this is occurring. The number of rows is less then 500 and it seems to be a pretty straight forward export. Any help is
greatly appreciated. Inherited this and not sure if this would be configuration issues or something else. It is happening on a number of reports.
Thanks.Hi Humbly,
According to your description, when you export report into CSV or Excel format, some rows are missing.
In your scenario, since you are missing data “rows” in your exported file, we are guessing if you have any visibility setting like toggle which hide those records. It’s possible that you have set toggle or visibility in your report. After exporting
Excel/CSV, some data might not appear properly. In SSRS 2008 R2, it has reported this kind of issue about data missing after exporting. However, those scenarios are not exactly same as your issue. It mostly turns out be conflict between data and “layout render”
and related to DataElementOutput property. DataElementOutput property controls export behavior, it indicates which report item data should appear in Excel/CSV render. For more information, please refer to this article: Reporting Services:
Why aren’t all my report columns exporting to CSV and/or XML?.
As we tested in our environment(SSRS 2008 R2), no matter what we export into CSV or Excel, we get same results as in BIDS . So I would like to know your report design structure. If possible, please provide some screenshots about results in BIDS and Excel/CSV
render extension results. It may help us find out the root cause of your issue. Thank you.
Best regards,
Qiuyun Yu -
Missing data: Profitability segment no. in Sale order creation
Hi Gurus,
while creating a Sales order, I am getting the Below Error;
"Error while the Operating Concern being determined"
Massage no: KE/AD817
Error: Missing data: Profitability segment no.
Its Urgent..
Can anybody suggest....
Thanks
BKTHi Bani,
Please check if note 380102 helps in this case. From the long text of the error message you can find out which charachteristic is responsible for the error message.
Regards,
Abhisek -
How to analyse a problem in BI ( Example missing Data in a report )
Hello;
What is the best procedure to analyse a problem missing data in BW. the question could be unclear but I am looking for a method to determine directly and without taking long time in follwing the dataflow to be able to say that we have a problem getting a field A ou B.
Regards
AnisHi Anis,
you can debug data flow or let's say specific data load between 2 objects e.g. datasource and DSO or DSO an cube etc... you can track down e.g. like specific sales order was loaded e.g some specific field is treated within the load (e.g. in case there is ABAP routine used). However it is always better to start either from:
top->bottom = report->datasource (source table or extractor checked)
or
bottom->top = datasource->report
and go layer by layer (or infoprovider by inforprovider) to see if particular value is still there.
cheers
m./ -
Last week, I purchased the pro version of PDF Max and today deleted the free version since I am not using it anymore.
I don't what happened or how, this also resulted in missing data on the pro version. I created loads of annotations and notes using the pro version. Now, all that's missing. I am using the word "missing" because I think the data (notes and annotations) is still there but its just not showing up in the app. Since, the size of the app did not change. It still is 1.24gb on iTunes. Can you guys please help me recover or should I say figure out a way to display the files on the app? Pretty please!I'm not familiar with the specific app, but generally speaking if the free and paid versions of an app are separate (i.e. not an in app purchase), what you are seeing will be the case. the only resolution I know of is if the vendor provides an account and stores the data online, or it integrates with something like DropBox. If not, once the old version is deleted, the data is pretty much gone.
-
Missing data status for Idocs : HR ORG Upload in SRM
Hi All,
We are using ALE Idocs for uploading HR ORG in SRM system.We are getting some IDocs errors. 51 status is 'Missing data'.
Details description like below:
Missing data
Message no. HRALX00_ORG315
Diagnosis
It has been determined that the employee 00036837 has been received for the first time. However, not all the data that is needed to create a business partner has been received. In this case, the infotype 1001 and the subtype A209 have not been entered for the employee.
Procedure
Maintain the filter of the appropriate distribution model. To do this, call transaction BD64 in the source system. Add a new filter group to the data filter. Assign the following values for the filter group: infotype: 1001, object type: P, subtype: A209. After you have generated the partner profile again and distributed the distribution model, you can redistribute the relevant IDoc.
Please help me How to resolve this issue.Please let us know if you need any more information.Hi Ramchandra,
it s the best solution to your query to load the IDOCs manually using the context menu of the datapackage or IDOC --> manual update and then refresh the load as it is not throwing any error
check do you have enough number of process running in your system
check for TRFC logs
Thank you -
Missing data: Profitab. Segmt No.
Hi
I am doing a Migration from 4.0b Version to ECC 6. Now my server is up with ECC 6 and have the datas for 4.0b. Order to cash cycle - I am not able to do a sales order. System is giving a message
Missing data: Profitab. Segmt No.
Message no. VU019
Missing data: WBS Element
Message no. VU019
But actually i have not enabled PS or COPA.. Not sure why this error occuring. I have Profit center accounting. All the customizing from 4.0b are copied in ECC 6. Kindly let me know if anybody has come across this problem and how it has been solved
Thanks in advance...
Regards
MuraleKrushna Sbhi murale,
Even i face the same problem, kindly help me out with the solution.
sree... -
Grouping to display null values for all the missing dates
Hi SAP,
I am trying to display '0.00' value for all the missing dates in my crystal reports as follows:
17-Jan-14 40.00
18-Jan-14 0.00
19-Jan-14 0.00
20-Jan-14 80.00
However, my crystal report is showing as follows:
17-Jan-14 40.00
18-Jan-14 0.00
19-Jan-14
20-Jan-14 80.00
The missing dates with no data are group together and my '0.00' value is not. Kindly advise me the solution. The formula is shown as per attached.
Thank you.
Regards.Hi,
Thanks for your reply.
Fyi, I am using a formula field in crystal report to display "0.00" for days in between as follows:
whileprintingrecords;
if Days_Between({Command.DocDate},next({Command.DocDate}),'dd-MMM-yy') = "" then "" else "0.00"
There is another formula field in crystal report to display the missing dates in between as follows:
whileprintingrecords;
Days_Between({Command.DocDate},next({Command.DocDate}),'dd-MMM-yy')
Below is my report custom functions:
Function Days_Between (datefield as datetime, nextdatefield as datetime, format as string)
' This function is only used to display what data is missing within a specified date range...output type is text
dim thisdate as date
dim nextdate as date
dim output as string 'output is the text display
dim daysbetween as number
dim looptimes as number
looptimes = 0
daysbetween = 0
output = ""
thisdate = datevalue(datefield) + 1
nextdate = datevalue(nextdatefield)
if nextdate - thisdate > 1 then daysbetween = nextdate - thisdate else daysbetween = 1
do
if nextdate - thisdate > 1 _
then output = output + totext(thisdate, format) + chr(10) _
else _
if nextdate - thisdate > 0 _
then output = output + totext(thisdate, format)
looptimes = looptimes + 1
thisdate = thisdate + 1
loop until looptimes = daysbetween
Days_Between = output
End Function
The issue arise when when there is more than one missing dates in between but the null values ("0.00") displayed is only for the first missing dates and not for all the missing dates.
Regards,
Ting Wei
Maybe you are looking for
-
Video Chat ended with error -8 and sign off
Hey everyone, hope you're all doing well. I'm sorry if this comes out as a nuisance to people seeing as there are 234234234 people with the same sort of problem. I tried searching, but unfortunately nothing came up. So here's my problem/story. I'm co
-
My skype to go num is continually busy
Help, my skype to go num hasn't worked since friday. it is 5 days now. what is the deal and why are yall so hard to get in touch with and responses with. I use this number all the time it is how my boyfriend and i communicate and now i can't call
-
Best way to link queue type to data typdef
I am using "Obtain Queue" to create a multiple queues from multiple TypeDef formated data clusters. I want to then put these queue references in a cluster of their own so I can refer to them where necessary in my code. When I modify the data types by
-
Premiere cc 2014 renders not frame accurate?
I'm rendering some sequences from cc 2014 (the latest October release) all are exactly 20:00:00 long, with out set on that frame exactly. However if I bring the exports into after effects, some of them are a frame longer or shorter than they should b
-
Gurus, I tried to stop the HFR - Print Services, by going to services and stop, and it shows the status "stopping" but it does not stop at all. I have refreshed it however, it does not me do anything. Is there any suggestions regarding it. Thanks