PIXMA MX432. I can't print now. I only get the "please wait for a while.

I installed a new ink cartridge in my PIXMA MX432. I can make copies just fine, but I can't print. I only get the "please wait for a while" message.

Hello TomClark.
For testing purposes, please turn the printer off and back on. Then restart your computer. Once this has been done, try printing again.
If the error persists, please contact our support group using the "Contact Us" link below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?

I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?

Reinstall OS X:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

ITunes radio was working last night and now today I get the message An error occurred while contacting the radio tuning service. Check your internet connection, or try again later" What's up?

ITunes radio was working last night and now today I get the message "An error occurred while contacting the radio tuning service. Check your internet connection, or try again later"
What's up?

Two things to try, first, reset your PRAM.
Next, try rebooting your computer.
Please post back with results,

I have an Iphone 3gs. I can't get it to sync. Every time I try I get the response 'waiting for changes to be applied'. I've tried doing a reset but it still won't sync. Any ideas?

I have an Iphone 3GS. I can't get it to sync. Every time I try I get the response 'waiting for changes to be applied'. I do not have voice memos. Any suggestions?

This is a user forum, not a channel to address Adobe. As your fellow users and volunteers, we'll be happy to help you if we can.
You can download the CS6 trial version just like anybody else.
Once you download it, you can install it, input your serial number, register it and apply all necessary updates.
An alternative, if you know how to access your Adobe account, under My Products you'll find your Photoshop CS6 registration, next to which you should find a link to download CS6 if you originally bought it as a download

Can't print on HP 3700..."waiting for printer to become available..."

I can't print on my HP 3700. I've disconnected all cables, re-booted and nothing. I tried to remove and re-add the printer from 'Print & Fax' in System Preferences. I send something to print (from any application) and then in the print queue says "waiting for printer to become available...". Any help would be greatly appreciated!

Try the suggestion in this thread:
http://discussions.apple.com/thread.jspa?threadID=2640270&tstart=50

Recently installed Spotify; problems @ startup; trashed all Spotify info; now I only get "The application Safari quit unexpectedly".

I recently installed Spotify, but had nothing but problems every time I did a startup. So, I deleted everything tied to Spotify. NOW, when I launch Safari, a window pops up telling me "The application Safari quit unexpectedly". Has anyone else had this problem. I cannot get online at all now.

I've got the same problem, and have the same OS (10.5.8)

When trying to sync with i tunes i get the message "waiting for changes to be applied" how can i get around this

I have restored the i pad and reinstalled i tunes' no help

I had a similar issue in that it would proceed to backing up however when it had reached the last step it would remain frozen on "waiting for changes to be applied". I'm not sure if the source of this problem is connected to yours but what I did was quit all the apps on my computer, restarted and during the restart held 'option+command+P+R' what this does is it zaps the P-RAM which basically makes the computer forget what it remembers about the applications that were open. The computer uses some room on the RAM cards to store information about recent applications open so that when you open them the second time it does it much faster giving the illusion your computer is fast to begin with. Now this zaps that so you'll have a fresh iTunes running.. Like I said this worked for me but it may not for you but give it a try

I've reset my old iphone3 to pass to my grandson but everything has gone. Now I only get the Apple logo. Can anyone help !!

I reset my old iphone 3 to give to my gtrandson but all I get now is the Apple logo but nothing else. Can anyone help !!

Hi campbellfrompyrford,
Thanks for visiting Apple Support Communities.
I recommend the troubleshooting steps in this article if your iPhone does not start up past the Apple logo:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
All the best,
Jeremy

HT4623 phone froze up and now i only get the apple on my screen wont do anything

My phone froze up this morning now all there is an apple on the screen nothing is working to un freeze any ideas?

My phone just had the same problem. I have tried the hard reset buttons and power up tricks plus holding down home key when connecting to computer. Any suggestions?

I was updating my iPhone 4 and my cabel fell out. Now i only get the option to restore my iPhone. Will I loose all my apps, pictures, etc?

anyone?

All of your apps, pictures, etc should be on your computer, as you should always make sure that everything has been imported to, synced with your computer before any update.
You can just sync it all back.

Can anyone tell me how to get the Firefly addon for Firefox 3.6.8 despite the fact that my installation attempt results in the message that it can't be installed because it's incompatible with 3.6.8?

Need it on both Mac and PC. I use it with my old computer running Firefox 3.6.8 just fine but installed the addon before upgrading to 3.6.8. Additionally, I know other people who are running Firefox 3.6.8 + Firefly without a problem. I uninstalled Firefox and installed the oldest version I could find (3.5) and tried to add it that version but had the same problem. I disabled all other extensions but still no luck. Thanks so much!

Hello there.
If the add-on is incompatible with your current version, you need to contact its author and ask him to update his add-on.
There is a way, however, to force compatibility on all add-ons. See this:
http://kb.mozillazine.org/Extensions.checkCompatibility
If you have any questions about the process, just ask.

How can I print Double A4 with HP Officejet 6500? I only get the first page...

I try to print a large photo in "landscape" Double A4 with my HP Officejet 6500.
I can select "Double A4" to print but I only get the first page. So I only have half a photo.
What should I do?

chris
You can not attach a multi-page .pdf document to Pages.
Just create a folder in which you enclose both your Pages letter and the .pdf.
Peter

Hi i took my wifes phone and backed up on her computer , then i deleted everything from her phone and made restore from my laptop (my old phone ) , now I want to restore wifes phone back but on her itunes can't see her backup (only see mine). please help

hi i took my wifes phone and backed up on her computer , then i deleted everything from her phone and made restore from my laptop (my old phone ) , now I want to restore wifes phone back but on her itunes can't see her backup (only see mine). please help

Thanks for responding but the link seems to be relevant to Windows. Is there a similar method for Android phones?

I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

Try updating the printer driver.

Upgraded to 2.4 Can't print now

I now get a message that says: Before you can perform print related tasks, you need to install a printer. Yes/No
When I click yes, I get this: Operation could not be completed. Print Spooler service is not running. I can print from PS just fine....
What to do?

I had the same problem with an earlier version of Lightroom. It turned out to be corrupt photo files. If I tried to print one I would get the install printer message But with other files I wouldn't and they would print normally. All the files I had trouble with were created at about the same time. I also found that if I went to CS3 I could print the files. In the end if I went to CS4 or CS3 and saved the file under a new name. It would then work in Lightroom or CS4 normally. I never found out how the files became corrupted in the first palace or why the would load and work normally in CS3 but not Lightroom or CS4. The problem has never come back but at least it was not fatal. Hope this helps.
John Passaneau
PS I use XP

PIXMA MX432. I can't print now. I only get the "please wait for a while.

Similar Messages

Maybe you are looking for