PIXMA MX522 using the keypad for letters and numbers

I need to use a password to log onto a wireless network which has letters and numbers. The letters are the easy part but how do you get the keypad on the printer to give numbers. The password is: abc261 (example only) they key pad does the "abc" part but how do I get it to add the number "261"? Your help would be appreciated. Thank you.

This might help
Press the SETUP button on your printer's control panel.
Using the arrows, select DEVICE SETTINGS, press OK.
Select LAN SETTINGS and press OK.
Select Wireless LAN Setup and press OK.
If a message appears to press the WPS button, press STOP to cancel.
Select STANDARD SETUP from the next screen that appears and press OK.
Highlight your access point or router and press OK.
Press OK again to confirm the access point name.
Enter your passphrase using the keypad to the right.
At the screen where you enter your passphrase, in the top right corner of the LCD screen you should see a :1 . This indicates that you are in numeric entry mode. If you press the asterisk key (*) it will switch to :A or uppercase letter mode, pressing asterisk again with switch to lowercase letter mode. To enter a letter in either letter mode, you will press the associated number key to cycle through the available letters. For example: To enter a letter "c", you will press the "2" key three times.
Press OK when done.
The LCD screen will say "Connected" if the password is correct.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Similar Messages

Using the spacebar for starting and stopping a clip does not work

Hi!
The spacebar for starting and stopping the playing of a clip in the viewer of a sequence in the timeline has a live of its own. Without changing any setings, it sometimes works, but mostly not. Is there a seeting, I have not figured out yet? While in a session with Final Cut Express, it does not change its behavior. It starts with a working or not working spacebar. The same applies to the arrows to go back and for a frame, or back and for a clip. If the spacebar does not work, the arrows do not work either.

thanks everybody. But my spacebar and arrow keys still do not work.
As uggested, I deleted the preferences in the library (which is also what is suggested by fcpbook.com/Misc1.html)
I am used working with Final Cut for some time now. And just got myself a new iMac and the program. So everything is quite new. I did not change any settings so far.
The first 2 days everything was fine.
Then, one day, the spacebar and the arrow key stopped working. Not in the middle of a session, but when I started the FCE new. Inbetween, it worked for some time. Now, the spacebar is gone again.
It's just the function of playing the clip that does not work. In whatever window (timeline, viewer). The function of the spacebar to make a space (for example in te name of clip or in a text file) works fine.
I would not mind the spacebar that much, but I miss the arrow keys to go from frame to frame, or from clip. It's strange.

I can't get the entire serial number off my 5s.I do not have the original box or paperwork.All I find at ABOUT is the first nine letters and numbers followed by three ...-please help.

5s,64 GB, with IOS 8.1.3, seems to have battery draining problem I just became aware of after just acquiring this phone. I can't get the entire serial number off the phone after going to GENERAL,ABOUT, and down to serial number. I only get the first nine letters and number with three ...---Need to get this info to check with Apple and see if this phone indeed has this draining battery issue and get it repaired. Tried using info from the Apple site to get the entire serial number and couldn't get it to work. Thanks for all help.

rjcurtis wrote:
---Need to get this info to check with Apple and see if this phone indeed has this draining battery issue and get it repaired.
What “draining issue”?
The iPhone 5 has a battery replacement program but it does not include the 5S.
I can't get the entire serial number off the phone after going to GENERAL,ABOUT, and down to serial number. I only get the first nine letters and number with three ...---
See this -> Find the serial number and other information for your iPhone, iPad, and iPod touch - Apple Support
"On most iOS devices, you can tap Settings > General > About to see your device's serial number, IMEI/MEID, and ICCID. If you're using iOS 6 or later, you can tap and hold on the number to use the copy option, then paste this information into Apple registration or support forms."

Using the GPU for editing and render

I just got a new GTX 770 4GB classidied graphics card.
However when I'm editing and rendering in CS6 I'm not seeing it being used at all.
I have the CUDA option selected in the project settings,
but still premire does not take advantage off the GPU.
Anyway I can use the GPU to speed up render times?

Please refer to this post on 'What does Premiere Pro accelerate with CUDA/OpenCL?'
http://blogs.adobe.com/premierepro/2011/02/cuda-mercury-playback-engine-and-adobe-premiere -pro.html
Best,
Peter Garaway
Adobe
Premiere Pro

Can i use the TC for Audio and video storage? How?

I have a Time capsule and i want to use it to storage audio and video, and use it with my Home theater system. I am not sure how can i play it? Ipad? OS?
Somebody has experience with this?

Why are you asking in the iphone forum?
The ipad forum would be a better place to ask.

Checking for letters and numbers

Guys, i need to check a String to see if contains either letters or numbers and nothing else. I know that there's certain function is could use like:
1. isNum() - to check for numbers
2. isChar()-to check for letters
but the things is that i get error when i tried to use either 1 of these methods.
So is there any other methods i could use to do this validation??
Thx Guys

Ooo.. i saw that 2 method too but it says that it onli accept character but not string and wat i wan to check is a String.

How do i get the screen for pages and numbers to become bigger on my screen

How do I get the Screen for pages, numbers and quickbooks to become bigger on my screen.
The Font is fine for pringing

Mac's don't have UI scale options like Windows has.
Either you can drop the screen resolution in Displays a wee bit and make things appear distorted, or do what I do and use the Universal Access and set a control key, then use a mouse wheel/scroll to zoom in and out where the mouse is pointed.
For easier web surfing I've got a good solution here
Better surfing options for hard of seeing users

I can not use the arrows for previous and foward at the top of the browser bar.

At the top of the screen there are two arrows, left and right, to click on to move back and forth from current screen to the previous screen such as a list of websites. The arrows are visible but not highlighted to be used.

I was having a similar problem but only when answering calls. A reset seems to have fixed it. http://support.apple.com/kb/HT1430
If that doesn't do it you may need to contact Apple Care or take it in for repair.

Use external drive for windows and mac

Hello,
I just bought a external 320Gb Western Digital Drive. I would like to use
the drive for windows and mac.I will not like to make partation on the drive
to use it on both operating systems. Is there any formating system with which i can use in both operating systems? I would like to use time machine feature on that drive also.
Thanx.

If you want to use a disk for both PC/Mac file storage and Time Machine, you will have to create two partitions. Partitioning is sort of like creating multiple virtual disks on the same physical disk. One partition should be formatted for PC (which the Mac can also use) and the other should be formatted for HFS+ (Mac only) which is what Time Machine requires. The Disk Utility application makes partitioning and formatting very easy.

I burnt a dvd from a file I exported from quicktime using the share with apple and pc option. It was burnt directly from the finder. The dvd works perfectly on my mac, and also runs in my windows, but the sound in my windows pc is stammered.

This is file I created in SnapzPro (which was saved as a Quicktime mov - Animation) of a Powerpoint Presentation.

Jon, how do I re-compress the Snapz data for dvd playback?
That depends on your specific work flow strategy. I normally perform the processing in two stages if editing is involved or in a single stage if I don't plan to trim, title, add a narration track, add special effects, and/or add filters to the Snapz Pro X captured screen data.
In the two-stage process you export the captured data to an intermediate low-compression, high-quality fomat. (This can be the default settings for Snaps Pro X or a more modern editing specific format like ProRes 422/Linear PCM depending on the codec components for which your system is configured and your personal editing preferences.) The Snapz Pro X intermediate file is then edited in the application of your choice and the results are re-compressed to your final target compression format.
In any case, whether you are re-compressing the data using QT 7 Pro, iMovie, GarageBand, MPEG Streamclip, Snapz Pro X, or similar third-party app that accesses the built-in OS X QT routines, the export process is essentially the same. Whether you use a "Movie to MPEG-4" or "Movie to QT Movie" export, you must export to a data rate limited, multi-pass H.264/AAC compression combination to take advantage of the "Optimize of CD/DVD" option. Specific data rate limits depend on the playback dimensions of the file you are creating, the minimum level of quality you will accept, and the playback speed of the hardware to be used. (I normally target 4X-8X settings for SD content but if you know the recipient has a higher rated optical drive and your content is HD, then you can use higher encode settings for improved quality.)
I captured the slideshow again in Snapz, and saved it as H264/AAC. Is this good enough?
If you did not specifically use the "Optimize for..." feature, then the file is automatically targeted for "Computer" playback which assumes playback is from an hard drive which has greater bandwidth/faster throughput than an optical media player. If the target display dimensions are resonably small, the the contextual nature of the H.264 video encoder may or may not be within the playback limitations of an optical drive usually depending on the encode matrix dimensions, graphic complexity of the source data, overall brightness of the scenes, and limitations you may have place on the target file—i.e., the larger the encoding dimensions, the faster the data date and the less likely the file will be compatible with optical drive playback without having to constantly interrupt playback to cache/rebuffer additional data. However, you can always tell the recipient that if this happens, he or she should simply copy the movie file from the CD/DVD to their hard drive for playback.
What now? Do I open it in Quicktime and use the "share for mac and pc", then right-click on it in the finder and "burn to disc?"
What you do next depends on how you plan to burn the file. The steps explained above allows you to create a file that is compatible with playback from an optical drive in a QT Player app but is not authored for playback from a commercial DVD Player. Your next step is to burn that file to an optical disc that can be read by your recipient's computer. I my case, I normally burn the disc using a hybrid (HFS Plus/ISO 9660) format which supports HFS Plus, ISO-9660, Rock Ridge, and Joliet with Rock Ridge file systems. How you do this is up to you. You can, for instance, use a third-party app like Toast or Dragon Burn to create a data disc; create/burn an image file with your Disk Utility app (this is a good option if you plan to burn several discs now and/or in the future); create a named "Burn" folder, drop the file to it, and press the burn button; or simply insert a blank optical media disc into you optical drive, change the default disc name to whatever you want, drop your file to the blank media's Finder window, and press the "Burn" button. (NOTE: Burn options may differ depending on the software installed on your system and/or the version of OS X under which you may be operating.)
Dont see any specs re playback from an optical disc drive? The slideshow is only 3 min long, and I want to avoid turning it into a video DVD using iDVD, iMovie etc, as the quality of the pictures and type degrades badly. Thanks for the help. Been struggling with this for weeks.
As noted above, this is an encode setting that only becomes active when you are targeting your H.264/AAC encode for multi-pass/data rate limited compression. When active, the "Optimize for..." pop-up allows you to select "computer" (targets playback from a hard drive), "CD/DVD" (targets playback from optical media), or "Streaming" (targets playback from a realtime streaming server) options. This option prevents data rate excursions from exceeding limits normally associated with each of the named types of playback. This option has nothing to do with the file system used to burn the media disc which determines which platforms/OS can read the disc and the file it contains.

I only want to use the icloud for my music

I have a PC and an ipad2. I would like to use the icloud to transfer music I previoulsy loaded via a CD. Music that was not purchased from iTunes does not show available to download when I open my ipad2/shared music library. Would I use the icloud for this and if so, how would I select specific albums? I have heard many horror stories regarding icloud syncs so I have yet to activate my account. I only want to use icloud for my music and nothing else.

Yes. Only purchases from iTunes are stored in the cloud. If you want to store songs imported via CD you need iTunes Match.
http://www.apple.com/itunes/itunes-match/

Screen Saver when calling and need to use the Keypad, the screen saver doesn't detect the phone has left the ear and blanks out the screen. Even ending a call is difficult as the screen blanks out within seconds

I have to use the Keypad a lot when making calls. Make the call, the Robot then asks to enter a number for a service, pull the phone down from the ear, the screen may light up for a second, but then the screen saver cuts in, blanking the screen out. Sometimes you hit the Home Key to awaken the sccreen, enter your number and then back to the ear to hear the next set of instructions. Back and forth just trying to enter the options is a pain. Sometimes even trying to end the call, the screen blanks out and you fight to try and end a call.
If I use the Speaker function the keypad works; the speakler phone is not alway appropriate.
It appears that the phone gyro, doesn't detect the phone has moved from the ear to the viewing angle. This wasn't an issue until recently and I can't remeber if it's the iPhone 5 or one of the updates. It definitly wasn't there earlier on, as I threw away an Windows 6.5 phone for the same problem.
I'm not sure if it's a hardware or software (design) issue.

It is not the gyro. This has everything to do with the iPhone's prioximity sensor.
Are you using a case that may be blocking or partially blocking the proximity sensor? If you are using the case, remove the case prior to the next call to see if the same occurs without the case.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

When I try to turn on my homesharing on apple TV it says that either my apple id doesn't exist or the password is wrong. However, I've been using the id for almost half a year and I even changed my password and it still wouldn't work. How do I fix this?

When I try to turn on my homesharing on apple TV it says that either my apple id doesn't exist or the password is wrong. However, I've been using the id for almost half a year and I even changed my password and it still wouldn't work. What can I do to fix this?

Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.

I have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way f

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

PIXMA MX522 using the keypad for letters and numbers

Similar Messages

Maybe you are looking for