Pixma MX860 shows an error 9000
Cannon MS860 printer shows an error 9000 on screen, I followed Instruction to turn it off then back on and get the same error. The manual gives no help. Any suggestions from out there?
Since turning the printer off and on did not resolve the issue, please turn off the printer, unplug the power cord from the back and leave it out for al least 10 minutes, then plug it back in and turn it back on. If the error persists, the printer will unfortunately require servicing to resolve the issue. Please use the contact link below to obtain information on your service options.
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Similar Messages
-
Hi,
I recently bought a Canon PIXMA MX860. I want to print wirelessly via bluetooth from my computer, but an error message keeps on popping up "Error Number : 311 Printer is in use or an error has occurred. If an error has occurred eliminate the cause of the error."
I updated to all the newest drivers. I tried looking at the gutenprint drivers, but I couldn't find one that works with the Canon PIXMA MX860. Any help would be much appreciated!These threads may help:
http://discussions.apple.com/thread.jspa?messageID=10105410�
http://discussions.apple.com/thread.jspa?messageID=9962758� -
My Pixma MX470 shows error check in 1686 Col. How do we fix this?
My Pixma MX470 show error-Check Ink 1686 Col.
We have checked both the color and the black ink. It still will not fax or print.
Please help.
WandaHi wandasf,
The 1686 error indicates that your color ink cartridge may have run out of ink. If you would like to continue printing or faxing until you are able to replace the ink cartridge in the unit, you can disable the ink level detection function of the printer by pressing and holding down the STOP/RESET button the printer for at least 5 seconds, then releasing it. Once the ink cartridge is replaced with a Canon genuine ink cartridge, the ink level detection function of the printer will be re-enabled.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Canon PIXMA MX860 error message ScanGear
When I click on my Scanner (I put MP Navigator EX in my Dock), the application opens, but then a window opens that states:
ScanGear Searching for Scanners
Do you want the application "MP Navigator EX 2.1 app" to accept incoming connections?
I have to then click "Allow"
Setting can be changed in the Firewall panel of Security & Privacy preferences.
I have gone into the Firewall panel of Security & Privacy and added the scanner and the MP Navigator EX 2.1 app to allow incoming connections; I have also updated all software I could find relative to the Canon PIXMA MX860 on the Canon website.
But every time I try to use my scanner, I have to click on the "Allow" button, as if I never changed the settings int he Firewall panel.
It's not a big deal, just a nuisance to have to keep on clicking the Allow button every time I want to use the scanner. Any thoughts?These threads may help:
http://discussions.apple.com/thread.jspa?messageID=10105410�
http://discussions.apple.com/thread.jspa?messageID=9962758� -
Canon PIXMA MX860 printer on Snow Leopard
After upgrading from OS 10.4.11 Tiger to OS 10.6.4 Snow Leopard, my Ethernet connected MX860 stopped working. The original "PIXMA MX860 series Setup CD-ROM" returned an "unsupported" s/w error when started. After working with a Canon tech for a while and downloading the items below from the Canon web site, the MX860 is back in service and all appears fine. Note: some of the items were only downloaded for completeness and are not needed to drive the MX860 printer & scanner.
DRIVERS:
mx860sosxns10ea7-3.dmg (MX860 series MP driver ver 1.0 for network)
mx860sosxcp102620ea8-2.dmg (MX860 series CUPS printer driver ver 10.26.2.0)
SOFTWARE:
eppexosx322ea8-2.dmg (Easy-PhotoPrint EX ver 3.2.2)
smosx140ea8-2.dmg (Solution Menu ver 1.4.0)
mpnexosx212ea8-2.dmg (MP Navigator EX ver 2.1.2)
BROCHURES AND MANUALS:
mx860sosmosx130us.dmg (MX860 series on-screen manual)Hello and welcome to Apple Discussions.
On OS X Server, you need to use the Server Admin utility (Applications > Server ) to share the local print queue. This requires the Print service to be added/started and then a queue created for the local printer.
Seems unusual that you would want to share a wireless printer from the server. The MacBook 'clients' would still be able to connect directly to this printer without having to connect via the server share so without knowing all the details of your setup it just seems an odd requirement. -
Hi,
I am using Windows 8.1
I have an External Hard Disk i have partitioned it to 4 parts.
One drive is now inaccessible due to sudden power failure while listening Music from that drive few days ago.
Now it shows "Data error (Cyclic redundancy check)".
I tried all the procedures provided here like
chkdsk /f, diskpart, rescan etc
but no result :( (i mean all processes failed. They could not detect the drive).
Please help me to get those data, pictures and project files.
thank youThen why aren't you posting this in the Windows 8 forums found @
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
This is a Windows 7 forum for discussion about Windows 7.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
ThanksIt is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.
-
How to show custom error message in WebADI Excel template?
Hi,
I've created a custom Web ADI integrator and associated it with a 'Procedure' based custom interface.
WebADI Interface API Returns is set to "Error Message".
I'm using raise_application_error(-20001, "Actual Error Message") for invalid rows,but custom error message from PL/SQL is not populated on the excel template.
Instead it is showing "SQL exception occurred during PL/SQL upload".
Am I missing anything? How to show custom error message from Pl/SQL procedure to WebADI Excel template?
TIA
NarasimhaThe custom API errors are visible in the BNE log but not on the Excel.
BNE Log=>
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR BnePLSQLUpload.doUpload: Exception while uploading to PL/SQL API. Error Code: 20001, Message: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR BnePLSQLUpload.doUpload: Stack trace: java.sql.SQLException: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:439)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:395)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:802)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:436)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:521)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:202)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1005)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1307)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3449)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3550)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4710)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at oracle.apps.bne.integrator.upload.BnePLSQLUpload.doUpload(BnePLSQLUpload.java:284)
at oracle.apps.bne.integrator.upload.BneSAXUploader.processDeepestLevel(BneSAXUploader.java:2346)
at oracle.apps.bne.integrator.upload.BneSAXUploader.startElement(BneSAXUploader.java:1182)
at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:181)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1288)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:336)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:234)
at oracle.apps.bne.integrator.upload.BneUploader.processUpload(BneUploader.java:301)
at oracle.apps.bne.integrator.upload.BneAbstractUploader.processUpload(BneAbstractUploader.java:114)
at oracle.apps.bne.integrator.upload.async.BneAsyncUploadThread.run(BneAsyncUploadThread.java:140)
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 WARNING BneOracleWebAppsContext.getTimeZone CLIENT_TIMEZONE_ID has not been set
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 ERROR BneOracleWebAppsContext.getExtraJDBCConnection recieved the same connection as the base connection. There may be transaction problems.
How to show the same error in the excel template?
Here is the package:
CREATE OR REPLACE PACKAGE BODY APPS.XXPO_COSTFACTS_WEBADI_PKG
AS
PROCEDURE upload_data (
P_CONTAINER_ID IN VARCHAR2
, P_SAIL_DATE IN DATE
, P_PO_NO IN VARCHAR2
) IS
--declare
lv_err_msg VARCHAR2(240);
lf_err_flag NUMBER := 0;
ln_temp NUMBER;
BEGIN
--------------------- checking for mandatory parameters---------------------------
IF (P_CONTAINER_ID IS NULL) THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg||'-'||'Please enter CONTAINER_ID - ';
END IF;
-------------Validation for Sail Date Format----------------------
IF (P_SAIL_DATE IS NULL) THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' ' || 'Enter Sail Date - ';
ELSE
BEGIN
SELECT 1
INTO ln_temp
FROM DUAL
WHERE P_SAIL_DATE = TO_DATE (TO_CHAR (P_SAIL_DATE, 'DD-MON-YYYY'), 'DD-MM-YYYY');
EXCEPTION
WHEN NO_DATA_FOUND THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format';
WHEN OTHERS THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format'|| SQLERRM;
END;
END IF;
-------------Validation for PO_Number----------------------
IF (P_PO_NO IS NULL) THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' ' || 'Enter PO_NO - ';
ELSE
BEGIN
SELECT count(1)
INTO ln_temp
FROM PO_HEADERS
WHERE Attribute4 = P_PO_NO;
EXCEPTION
WHEN NO_DATA_FOUND THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' No Oracle PO for Biceps PO#'||P_PO_NO;
WHEN OTHERS THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' Error getting the Oracle PO for Bicpes PO#'||P_PO_NO||' Error-' || SQLERRM;
END;
END IF;
-----------------------Insert Record----------------------------
IF lv_err_msg is NULL THEN
BEGIN
INSERT
INTO XXP2P_HW_COST_FACTORS_STG
CONTAINER_ID
,SAIL_DATE
,PO_NO
, ERROR_FLAG
, ERROR_MSG
,CREATED_BY
,CREATION_DATE
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
,LAST_UPDATE_LOGIN
VALUES
P_CONTAINER_ID
,P_SAIL_DATE
,P_PO_NO
,lf_err_flag
,lv_err_msg
,FND_GLOBAL.USER_ID
, trunc (sysdate)
,FND_GLOBAL.USER_ID
, trunc (sysdate)
,FND_GLOBAL.LOGIN_ID
-- commit;
DBMS_OUTPUT.put_line
'-' || 'After ap_invoices_interface'
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' ' || 'error loading CONTAINER_ID-' || P_CONTAINER_ID || SQLERRM;
raise_application_error(-20001, lv_err_msg);
END;
ELSE
raise_application_error(-20001, lv_err_msg);
END IF;
END upload_data;
END XXPO_COSTFACTS_WEBADI_PKG; -
good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
My windows pc is showing an error message "The file iturnes library itl cannot be read"
My windows pc is showing an error message "The file iturnes library itl cannot be read because it was created by a newer version of itunes". I have not downgraded my itunes or done anything with it other than follow standard download instructions .I have an ipad one and iphone 3g, neither work now help?
The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
Firefox crashes as soon as Flash video tries to load and Safari shows the error "Plug-in Failure"
I am unable to use Youtube or view Flash video on any sites.
Firefox crashes/quits as soon as a video tries to load and Safari shows the error "Plug-in Failure".
I have uninstalled Flash, downloaded a fresh version and installed, but no joy.
I am using OS X 10.6.6.
This is what I have tried so far;
1. Repaired Permissions.
2. Restarted with external drive and run Disk repair.
3. Restarted with external drive and run DiskWarrior.
4. Completely uninstalled Flash plugin. Robooted. Reinstalled Flash plugin. Rebooted.
5. I even installed an earlier version of the plugin to see if there was some incompatibility with the latest version.
6. Created a new user login and tried from there. Same problem.
Any ideas?You have what is necessary for Flash Player to be working. Firefox had some issues last year but it was after loading a video or the website. I had not heard of it lately and even last year don't recall it happening on the Macs.
What is happening with yours sounds like a direct conflict with some addon/extension.
Here is the link from Firefox describing what happened last year. You might want to see if there is anything more current.
https://support.mozilla.com/en-US/kb/The%20Adobe%20Flash%20plugin%20has%20crashed?s=Firefo x+crashing+browser&as=s
I'll get the Mac troubleshooting guide in a minute and post it also.
Any adblock or popup blocker software would cause this also.
Thanks,
eidnolb -
I was working on my project on imovie and when I was trying to share it.. it automatically closes and shows an error... I have tried to do it so many times and it shows the same error again and again.. I dont want to loose the document at all.... I facing too much problem plss help me plss its very urgrnt for me... plss help me :-(
well no reply from the community. sniff- do i stink!? - probably a little bit. If i have lost all that data then I'm gonna really really pong.
Any ways i have purchased a 1tb usb HDD and have managed to duplicate the dmg file onto it. however still unable to mount the **** thing. so now i have ordered disk warrior which will be in my possession tomorrow.
fingers toes eyes crossed. -
I tried to update my iPhone running 6.1.2 to 6.1.3 it showed an error and went into recovery mode but when I try to restore it it doesnt even got restored.......... ! Please Help !!!
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work. -
after writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present.
My pc is based on asus motherboard. Labview 7 and Windows 2000 sp4 installed.
The error message continue also if i stop the application that generated report on a: .
I've got this problem only on a pc: on other machines i don't have this problem (Labview only continues to access floppy but it doesn't show any window).
Find below an example: first press the button to create a report on a: then remove the floppy, after 30-35 sec i've got the error message
Attachments:
prova.vi 55 KBHi,
I tried your vi: I don't get any error message after removing the disk but LV7 keeps on accessing the drive at regular intervals even if you stop the vi and close it!!! This is not supposed to happen.
The only way to stop it is exit LV7.
If you don't use the file dialog and you wire a full path, you don't get any problem.
I also created a very simple vi that conditionally writes a text file on a: and I got the same behaviour.
This problem occurs only with LV7, I tried the same examples in LV6.1 and everything was fine.
If anybody wants to try I attach this simple example,
Alberto
Attachments:
salva_testo1.vi 22 KB -
After upgrading to Yosemite (I don't have iPhoto anymore, only PHOTOS) my pictures will not import from my iPad or iPhone 5s or any picture from web, it shows "Database Error: failured to persist version". Any help will be greatly appreciated.
Sorry,
Yes, the error message is exactly like that ("Database error: failured to persist version")
No photos will import at all. I use USB to import from iPhone 5s or iPad 2.
About the difference? iPhoto and Photos . Are there two softwares?
I also will like to merge and/or synchronize all my photos I had saved to iCloud backups, Macbook Pro, iPhone 5s and iPad hard drives using iPhoto. It's call iPhoto library. At one point I turned off streaming.
Thanks again Larry HN.
Maybe you are looking for
-
How do I install an earlier version of firefox than the download page recommends?
I have a new PC and need to be able to use the delicious bookmark add-on for work. I loaded firefox 4 and the bookmark doesn't work so I need to load an earlier version and can't figure out how....only see an option to install firefox 4.
-
Can't re-install download helper
Video download helper was uninstalled while my computer was being worked on. I re-installed it but now I don't have the download helper icon that you put on the toolbar. It is not on my toolbar nor in the toolbars option folder. How can I get the dow
-
Acrobat Reader 9 Crashes PC When Opening 2 Documents Simultaneously (2D Graphics Acceleration Relate
Hey all, Weird issue. I noticed my Adobe Acrobat Reader 9 crashes when opening two PDF's simultaneously. The first one opens just fine. The second one, a new window opens, but there's only black inside the 2nd Reader window. It finally (after way too
-
Macbook pro doesn't see lexor 16gb usb memory stick. (Windows PC does see it)
Heading says it all. I'm baffled. Windows PC sees the memory stick but my MacBook Pro doesn't. Plese help. TJ
-
Which BAPI is called by middleware to create a sales order in ECC??
Hi experts,as we know,a BAPI in ECC will be called by middleware to replicate a sales order from CRM to ECC? Do you know the BAPI name?? How can I debug into it from CRM side?? Thanks. Jerry.