Pixma MX922 drops off network, what ports need to be opened

Pixma MX922 keeps dropping from my wireless network - no matter what I do to configure. Called Canon support and they were not able to resolve issue (offered to replace printer, prefer not to do this - only as last resort).
I attempted ALL the standard items to resolve (re-install printer, drivers, make static IP (NO DHCP leasing - and my DHCP lease time on router is set to max. time of 2 weeks anyway...), made sure of no firewall issues, etc., etc.) but printer keeps doing this. Can ping the ip, etc., so I know that it exists, but UNLESS I POWER the printer OFF / ON - anything I sent to it will just sit in print queue.  Once I power it off / on - all printing is fine  - only for a few hours or next day - until it happens again...
Somewhere on this forum another user stated that he resolved the problem by contacting Canon support and they told him specific Ports on his router that had to be opened in order to fix the issue of the printer dropping off wireless network (* he must have had a better tech than the ones I spoke with...).
Does anyone on this forum know the ports that must be open on the router?  Possibly one or two higher number ip ports such as 1020, or 25466, etc. ?
Thank you to anyone who may know this and provide.

Podcasting is not streaming on content, only downloading. It is basically a blog with an attachment in the RSS feed. Only port 80 (normal web port) needs to be able to go through the firewall.

Similar Messages

  • What ports need to be opened from apple's firewall?

    I googled that qmaster uses port 10012 tcp&udp, but what ports need to be open for Qadministrator and Batch Monitor?
    They didn't seem to work just with 10012.
    Is there any documents about this from apple?
    Idea of just leaving firewall off sounds like Microsoft in te 90s'.
    And even they have made an interactive firewall that asks you to open a port when some application tries to use it.
    Well, these fcp applications are sooo PRO...

    On the Qmaster system prefs pane, turn on the "Show Qmaster status in menu bar" option in the advanced tab.
    Then click the Qmaster icon on the menu bar, and it will show you all active Qmaster services, and their TCP port. You would need that port open. You need to do this on every computer on the cluster.
    In your setup, are all the computers on the same subnet? Although you may be on a large network, you can rope off your systems into their own sub network, with a master firewall and avoid this type of problem. Each computer will have a different port, and that port will change every single time you start and stop the service. The TCP port will fall between 40000 and 65536 (the highest port ranges).
    So, again I recommend protecting the network which will protect all the systems universally. But try setting the TCP ports listed on all the service nodes, and remember that those will change whenever you start and stop the service. (I'm not sure if the port will change after a reboot as well.)
    Good luck

  • What ports need to be opened for Podcasting?

    To all,
    I am a little lost. We have a server which is inside our firewall. What we're trying to do is to use this server as a test bed for podcasting. Our network admin is going to set it up so that it's behind the firewall but we can still access the content from home or anywhere. Now my question. The admin has asked us what ports need to be opened for podcasting. We have no idea. Is this something we need to setup on the server we are using or is there something else.
    FYI - We are using a Windows NT server...I know, I know, I need to upgrade.
    Any help is greatly appreciated. Thank you in advance.
    zanm
      Other OS   windows NT server

    Podcasting is not streaming on content, only downloading. It is basically a blog with an attachment in the RSS feed. Only port 80 (normal web port) needs to be able to go through the firewall.

  • What ports need to be open?

    I'm setting up my fmis to deliver video through rtmp and http.
    I'm on a locked down network.
    What ports need to be open to allow people outside of the network to access the rtmp/http streams?
    I am correct to say only port 80 and 1935?

    Yes... 80 and 1935 is what you need for RTMP connections and proxied HTTP downloads. If you want to use RTMPS, you should also open 443.
    If you want to be able to use the admin service and admin console, you'll also want to open 1111

  • Thin JDBC through firewall - what ports need to be open?

    We are running Oracle 7.3, and Oracle Web Server on the same
    computer. The firewall is set up to allow connections to that
    computer from anywhere, on ports 80 and 1521.
    Our thin JDBC applet works perfectly from inside the firewall,
    but from outside, I get a time-out error trying to open the JDBC
    connection.
    What else needs to be done get JDBC through? Do other ports need
    to be open on the firewall?
    The JDBC FAQ mentions a "Net8 compliant" or "SQLNet certified"
    firewall - is that relevant to this problem, and if so, what does
    it really mean?
    We are supposed to be operational right now, so many many thanks
    for any help on this!
    - Joe Wielgosz
    null

    Try in the Lion Server Forum?
    Regards,
    Colin R.

  • What Ports need to be opened during Exchange migration?

    Hi Team,
    I am working on a Migration project (Ex2007 to Ex2013). Same forest same domain but are in different sites.
    Please find the below details
    AD Site1 - Ex2007 Servers
    2 Mailbox Servers (CCR)
    2 (HUB+CAS) in NLB
    2 Domain Controllers 
    AD Site2 - Ex2013 Servers
    2 Multi Role Servers (MB+CAS) with DAG
    2 Domain Controllers
    We have firewall in between data centers, could some one help me out what ports are need to opened on firewalls.
    Thanks,
    Balgates
    Regards, Balgates

    808 (TCP)
    Mailbox Replication Service uses to communicate
    53 (TCP)
    DNS
    135 (TCP)
    RPC End Point
    389 (TCP)
    LDAP
    3268
    LDAP
    1024 > (TCP)
    if mailbox store is not statically configured then 1024 higher ports need to be open
    88 (TCP)
    Kerberos
    445 (TCP)
    Microsoft-DS Service
    443 (TCP)
    Mailbox Replication Proxy service uses port 443 to communicate with other Exchange 2010 client access server via HTTPS.

  • What ports need to be open in a version fios Actiontec MI424WR router to share Mac files os 10.7os

    I need to share Mac Lion files over the internet through  a Verizon FIOS Actiontec MI424WR router. I don't know which ports need to be open.

    548 is AFP assuming you are sharing with another Mac

  • What ports need to be open on Fw for Waas Communication--Urgent

                       Hi All,
    This product is new to need your help in configuring this. I am explaining the architecture below:-
    We have a requirement to use WAVE-594-K9 Software Release 5.3.1 and in our Manila location and it will not talk to Waas central Manager in our client location instead client has installed one same model Wave-594 in PHX.
    So now client has said it will only be used for caching contents and not for optimizing, they have some video training on web which will be passed through this wave and for making them highly/fastly available to agents they want to use this.
    We have installed one Wave in Manila in application-accelerator mode and using PBR to redirect the desired traffic via Wave. As per our client Manila Wave will talk to PHX wave and PHX wave will get registered to Waas Manager in client network.
    We have firewall between PHX wave & Manila wave, please let me know do we need to opened tcp/udp ports on FW for opening the communication between these two waves?
    and what else i need to configure on Manila wave?
    This is very urgent quick reply will be highly appreciated!!
    Thanks!!
    Bhisham

    Thanks for the quick reply Kanwal!!
    I checked with my team in PHX and we have Juniper FW in between these two Wave's, so what i understand from the links which you have shared.
    In Manila Wave i need to configure that in Directed Mode and udp port 4050 needs to be opened bi-directionally on Juniper FW between IPs configured on wave devices.
    In Manila we have 10.111.x.189 (Virtual-Blade IP) & 10.111.x.190 IPs & in PHX we 63.149.23.x & 63.149.23.x (VB) so from both IPs we required to open udp 4050 bi-directionally? Want to be sure before raising any request :-)
    In PHX wave i am not sure whether we can configure that in directed mode and if it’s not then also it will work by opening port 4050 on FW Right?
    In last our client was saying that Manila Wave will only be used as cache engine (VB is configured as content-engine) and it will download contents from PHX Wave (which is registered to CM at client side), what does it mean and do i need to do any special config on wave to achieve this?
    I am very new to this device and lot of research on net confused me a lot, please don’t mind!!
    Will wait for your reply then only i will raise request with FWteam.
    Thanks,
    Bhisham

  • What ports need to be open in order to sign in with my Adobe ID?

    I keep getting an error when attempting to log in to activate Photoshop CS6 Beta.  The error says, "Please connect to the internet and retry".  I suspect my corporate firewall is to blame, but I need to know what ports I need opened in order to make my request.

    All Experiencing this issue. Please try these steps.
    Let's see what we can see here:
    1. Try going into a web browser and connecting to both of these addresses:
    https://www.adobe.com/
    https://www.acrobat.com/
    Let us know if you can get to those ok! Testing firewall functionality with Adobe.com addresses.
    After that, please let us know the results of clicking these links in succession
    2. Try going into a web browser and connecting first to
    https://ims-na1.adobelogin.com/
    and secondly to:
    https://ims-na1.adobelogin.com/status
    Let us know what you see, or if you get errors.
    It would be nice to have all responses show up here:
    http://forums.adobe.com/message/4285499#4285499
    Thanks!
    Pete

  • ZLM Agent behind firewall: What ports needs to be opened?

    What ports ZLM Agent (managed device) is using when communizating the ZLM Server? And what ports ZLM Server is using when communicating to ZLM Agent? We do not have server GUI up, so Remote Management ports are not needed...
    Thanx in advance...
    -John-

    John,
    Scroll down in the list till you get the TCP Ports,
    that has the information you are looking for:
    Novell Documentation
    Rainer

  • What ports need to be open to control Lion Server from a remote location (through Server.app)?

    I need to control a Lion Server from a remote location and need to poke some holes in the firewall, unfortunately, I have no idea what ports those need to be. I can control the Server via the Server Admin application, but it will simply not connect via the Server.app.
    Suggestions?
    Thanks in advance.
    Marius

    Try in the Lion Server Forum?
    Regards,
    Colin R.

  • What ports need to be open to allow ARD 3.x traffic to operate

    cannot ARD into Macs on a 192.168 type network.
    Clients running SL 10.6.4 with firewall completely off
    Clients running 10.5.8 with "allow all incoming connections" on
    Network admin here says this should work as "nothing is blocking it"
    TIA

    You need to open and probably forward TCP and UDP port 3283 and UDP port 5900. For encrypted file transfer (ARD 3.0), also open and forward TCP port 22. Setting up a VPN will probably be the most effective, though, if you need to control multiple Macs behind an NAT router, since you can only forward a given IP port to a single system.
    Regards.

  • What ports need to be open for device enrollment?

    I'm able to install the trust profile on an iPhone, but when I attempt to "Enroll" my device and I click "Install" it begins the process,
    Installing Profile, Generating Key, Enrolling Certificate and gets stuck and reports a network issue.
    I'm also hoping we can get our hands on some proper lion documentation. The resource page is pretty bleak right now.

    Yea they should have that info on the kbase.   I have been reading up on this as well, as my clients never worked and finding out you need ports open.
    I believe this is correct, if not someone correct me:
    Ports for Profile Manager - 2195, 2196, 5223, 1640, 80, 443   Apple Server block to open too:  17.0.0.0/8
    TCP Port 2195 and 2196 should be "oubound" from Profile Manager Server to 17.0.0.0/8.
    TCP Port 5223 "outbound" from LAN for clients to 17.0.0.0/8
    TCP Port 443 and 1640 "inbound" to Profile Manager server.  I would think port 80 as well, but any login I would put a cert on and use only 443.  Not sure if 80 is really needed.

  • IOS Firewall with EasyVPN - What ports need to be opened?

    I can not establish a VPN connection from my VPN client while outside, but can from inside. I assume I need to open a port on my IOS firewall but I am not sure which one. I opened isakmp but that didn't help.
    This is a 2801 with 12.4(15)t. Any Suggestions? The config is attached. Thanks!

    do the following change
    interface Virtual-Template2 type tunnel
    interface FastEthernet0/1
    after u get connected u will have problem that the vpn client will get connceted and get IP from the pool but can not communicate with inside hosts!!!
    becuase u need to exmpt the traffic going from inside network to vpn pool from nating
    u can do it is in ur nating ACL make first line as deny source ur LAN destination vpn pool and i would suggest u to use ip addresing for u vpn pool diffrent that the LAN rnage to avoide any subneting issues
    good luck
    if helpful Rate

  • What ports need to be opened on my firewall?

    I've got an app that send a javamail message via our smtp server behind a firewall. The app works perfectly when the rules are completely opened up for the client. If I limit it to just port 25, it can not connect to the host. What other ports are needed to use java mail? The only port number I see in debug is 25.

    POP3 uses 110 to communicate.....
    -Dave

Maybe you are looking for

  • Question on conditional text design

    I have a relatively large book (230 pages) with dozens of tables and 100's of graphics. I need 4 versions of this book. One for each grade level (3) and one if content for all 3 grades is sold as a "master course."  Other than implementing the condit

  • Itunes sync errors

    my itunes is trying to sync all apps on my computer to my iphone and touch.  It has removed all songs and filled all storage with apps.  I changed to a previously saved library which fixed the problem, but the next time I sync'ed it did it again.  Ca

  • Sign in Sheet

    I am creating an attendance sheet for students. I inserted logo as image and class info. Teacher: Courses: Date & Time: Location: Now, I am wondering how can insert student data. No | Last Name | First Name |Major |Year| Sing In |Sing Out 1 | 2 |than

  • Unable to open Analytic s In OBIEE

    HI every one, I am able to login to console and EM but not to Analytics. and in my em in Farm_bifoundation_domain (curreent version of obiee using is 11.1.1.6.6) Depolyments green 26% red 74% Fusion Middleware green 33% red 67% in coreapplication onl

  • "free transform" gives crappy result

    When I have a picture in Flash CS4 and rotate it via 'free transform' the picture gets distorted. When I do the same in Photoshop CS4 the quality stays very good. Of course Flash isn't Photoshop, but I would not expect the result to differ this much.