Pixma MX922 prints a page correctly, then won't print any more...the screen says "Printing..."
As the subject line states - it shows the document is still in the queue. I have it setup on our wireless router to print. I have to unplug the printer in order to reset it - it gives no error message, will not cancel the document, etc. I end up doing this a couple of times per day. Please help! If this is a wifi/WAN network issue, I'll hook up a cord and be done with it - I don't have to use it to print wirelessly, although that is one of the reasons I selected this model was for that capability.
Joel
Hi Dababyguitar!
So that the Community can help you better, we will need to know the computer operating system you're using (Windows XP/Vista/7/8 or Mac 10.x). Any other error messages or details you'd like to give will also help the Community better understand your issue.
Thanks and have a great day!
Similar Messages
-
When listening to music on ATV, it will play two songs from the playlist, then no more. You can see the playlist on songs, but it won't play. Turned everything off, reset the network...nothing works. Any ideas? It used to play fine...for hours at a time.
Hi. Thanks for your reply.
It is happening via "shuffle" in a playlist. Always two different songs within the playlist. You can see the next song on the screen that should, theoretically, be playing...but nothing happens. Even when you push "play" on the remote, it doesn't receive the command.
I reset, then restored ATV. Now, it doesn't limit itself to two songs, but does stop after a few. The more trial and error I do, the more I believe the problem is with Homesharing in iTunes. If I turn off Homeshare, then turn it back on, a couple more songs will play in the playlist. I have shut down iTunes, restarted computer, completed updates, but nothing seems to change it.
It used to play fine for hours on end, but has now found this glitch. -
This app was working fine, then suddenly it won't display any of the photos. One day the photos were there, gone the next. It still shows how many photos are there but just shows a white screen. I can't export anything to the photo album. Adding photos to existing folders yields the same result, only white screen displayed. However, I can create new albums and add photos to those without issue. Does anybody know how to recover the "missing" photo" I was going to try reinstalling the app but it's no longer available in the iTunes App Store. Thanks, Tracy
1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
Even organize your photos in albums — right on your device
2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad -
When I print to PDF using Acrobat 11 Pro from any application the acrobat Reader does not launch automatically. Associations are correct. Happens from Chrome, IE, Word, Excel, Powerpoint. Previously had deskPDF installed but uninstalled correctly. Can't find a preference setting for the auto launch. Thx for your help, Bruce
A simple way is to flatten the form fields, which converts the field appearances to regular page contents. You can do this with JavaScript or PDF Optimizer (Advanced > PDF Optimizer > Discard Objects > Flatten form fields). A very nice script that adds a custom menu item can be found here: http://www.uvsar.com/projects/acrobat/flattener/
-
Why can I not print from pages but can if I copy to text edit, I get "printer off line message " from pages ? I use HP wireless printer .
Are you sure you have the right printer?
In UNIX/OSX printers are virtual links to devices and even with the same name can be trying to reach a printer via another network address, so it thinks it is another printer.
Peter -
Firefox crashes when I close an e mail on AOL also it crashed once after printing some pages from my banking statement. Any ideas. I restarted a few times without any change to the crashing problem. What do you suggest.
I am using Mozilla Beta 4. I volunteered to try it out. It's lightning fast. I really love using it. I see there is a new version of Firefox should I download it??I HAVE NOW SOLVED THE PROBLEM BY RUNNING WINDOWS REGISTRY REPAIR TOOL WHICH HAS OBVIOUSLY REPAIRED CORRUPT REGISTRY FILES.
-
10.4.7. iMac 20" CoreDuo won't start any more
I did upload 10.4.7 yesterday together with iPhoto, iPod, iTunes (6.0.5.) and some other recent updates (altogether there were five, I cannot recall the last one). At first I did notice some “ticking” inside the iMac (2.0 GB RAM) every now and then, let’s say few minutes apart. That has never been heard before. Then this morning I noticed that iTunes was very slow. I did add few of my cd’s, and when attached the cover photo to the lower left corner the iTunes did update it very slowly, I think it took 1-2 minutes to add a photo to 12-15 songs. Then I did call Apple support (case #653790xx). The call took over an hour since everything I did on my computer was like slow motion. We did use DiskRepair and looked at the Console. When restarting the iMac it took several minutes, and when using safe re-start (shift on after re-start) the OS didn’t recognize my bluetooth keyboard. Then I was given advice to reload 10.4.7 from Apple’s site and install it again. Also I was asked to do Hardware Test (from install DVD). When I did try to re-install 10.4.7 there was an error after 71% uploaded, the installer asked to do that again. Then I did Hardware Test as advised, but there were no errors found (I did extended test with looping on and took several rounds). Next, when I tried to restart iMac from hard drive (Macintosh HD 10.4.7), it stopped repeatedly on Mac OS X window. Now I’m stucked, my iMac won’t start any more (I’m writing this by Windows machine, can you imagine?!)
I don’t know what’s wrong, but I have used Macintosh from 1987 (IIcx) and never, never before I have had these kind of problems. I suggest so far, that you take care when installing 10.4.7 on Intel iMac, I guess there might be a problem. I wonder why there is not email support for these kinds of problems and alert messages…? I’ll leave sailing tomorrow for two weeks and cannot report this by phone.
iMac 20" (CoreDuo) Mac OS X (10.4.7)Only way to get iMac starting again was to re-install 10.4.4 from DVD, and then update it into 10.4.6. For a while it worked perfectly, just as before.
Then I tried to print to CD with my EPSON Stylus Photo 950 from Adobe Photoshop Elements (2.0). It didn't print anything, but printer started flashing all lights. The print job was not performed, so I did remove it from the Printer Utility. After that the iMac started "ticking" again, same noise than before, after 10.4.7 installation. I did re-boot iMac. It never started, it does stuck on gray screen (gray block running clockwise). HW test from DVD didn't find any problems (extended search looping 3 times). But Disk Utility found hard drive to have inaccurate node structure, it could not fix it.
Apple support recommended to use DiskWarrior. However, it does not support (yet) Intel Macs. I haven't got TechTool Pro 4.5.1 anywhere. iMac does start on to FireWire mode (T at boot), but I cannot see the disk from 10.2.8 iMac.
So, obvisously the problem is not 10.4.7. I believe it to be ESPON printer driver compatibility on Mac OSX. This does not suprise me, EPSON printers *****, I shall never purchase one again. However, disk catalog structure should not get messed by one faulty printer driver! -
I'm trying to print some pictures in iPhoto but a error message apears in the screen saying that there is no theme installed and I need to have some theme installed. I don't know how to do that. Need help.
Reinstall iPhoto.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List. -
After clearing cash on my mac ( Go to folder: ~/Library/Caches and clear all, than to Library/Cashes and clear all again) applications won't lunch any more..I tried to delete apps like VLC player, firefox.. with app cleaner and again download and install the new one but it's the same..goes for all apps that are not originally part of Yosemite. I have done this cash clean up very often on Maverick without any problems. This time I done it again because I could not open my web site, the server has blocked me and I was trying everything including deleting cash from mac. Please advise me what to do..?!? Thanks in advance.
It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
My photosmart c4280 has an error and the screen says to turn power off and then on again.
my photosmart c4280 has an error and the screen says to turn power off and then on again
Please try temporary connecting your printer to some other power socket, without using any power extention or hub.
If the same issue persists, contact the local HP Support center, as it seems like and hardware or Power Supply problem.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
my ipod nano 5th gen is still making the clicking noise but won't play music and the screen is black what's wrong?!
Downloading past purchases from the App Store, iBookstore, and iTunes Storehttp://support.apple.com/kb/HT2519
Message was edited by: michael08081 -
I need to print the FULL image as shown on the screen - the image is SQUARE (equal on all four sides). iPhoto keeps cropping it into a rectangle - this is not acceptable! How do I get what I see on the screen into print form?
Like Terence explained:
OT -
I have an ipod touch that hasn't been used in a while. We want to use it now, but the screen says "ipod disabled. connect to itunes". When I connect to itunes it tells me to enter my passcode, however the ipod will not allow me to do anything (and I don't know the code anyway). I tried to put it in recovery mode as someone suggested by holding the home button while plugging the ipod up from the computer, but I never did get the "connect to itunes" symbol, I continually got the same screen saying "ipod disabled connect to itunes". Help!
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I have an iPhone 6 with IOS 8.1.3. When I go to the landscape view in Safari, the bookmark page appears and takes up one half of the screen. How can I get rid of the bookmark page so I can use the whole screen to what I am browsing?
OOPS! Too quick on the trigger to ask that question without trying anything. Sorry. Solved it by touching the bookmark icon.
-
When I search a music artist in the itunes store and then click to view all albums the screen is blank. Why is itunes store not showing me all of the Albums?
This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode
Maybe you are looking for
-
Agent reporting for PCCE Outbound campaigns
Hi all, I'm running through the out of the box reports to find the relevant report for outbound campaign at agent level. a) Agent Historical All Fields b) Agent Skill Group Historical All Fields c) Agent Queue Interval None of these report are showi
-
Bridge CS3 Will not open at all
I get the hour glass for about 1/2 second and nothing else. I have looked and the program is there but will not open. I have unistalled are reinstalled everything but it will not open. All the other Design Premium products are working??? Any suggesti
-
Trouble with FCP7, .mts, and Log and Transfer
I'm trying to upload footage from a Canon Vixia S200, and Log and Transfer won't work. For reference, the footage is stored on the SD cards in the camera rather than internal memory. When I tried Log and Transfer for an older Vixia that used internal
-
Oracle 10g expdp fatal error (ORA-39125 & ORA-01801)
Key phrases: ORA-39125 ... DBMS_METADATA.FETCH_XML_CLOB [TABLE_STATISTICS] ... date format is too long Hello, While performing a routine export (expdp) of schemas in an Oracle 10.2 instance on Linux, a fatal error (ORA-39125) was genereted. A screen
-
Pop up, UAC warning me of Firefox making program changes
I am running Windows 7 Professional (64 bit) and every time I launch Firefox 4 I receive a pop up which asks me "Do you want to allow the following program to make changes to this computer?" I realize this is a part of the UAC, which "I'm not going t