PIXMA MX922 with error code B200

I am about ready to throw this printer in the trash. First off everytime I want to print to it over WiFi I have to reset my router for my computers to be able to print. Now this error code (B200) comes up and the manual says to call support. Can a tech or someone from Canon help here?

Hi Frustrated83,
Disabling the Wireless LAN DRX and iPv6 settings on the printer may resolve the wireless issue you are experiencing. To do this, please follow the steps located at the link below:
Checking the Wireless LAN DR and iPv6 Settings
Regarding the B200 error, if you have already reset the printer and are still receiving the error, the printer will require servicing. Please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Pixma MG5420 getting error code 0x80070005 when trying to have my HP laptop connect to wrlss device.

My Pixma MG5420 is on, bluetooth activated. My HP laptop recognizes the printer when in Control Panel-->Hardware & Sound-->Devices and Printer-->Add a Device (only printer in the entire office), but when I hit next, it immediately pops up with error code 0x80070005. Says contact device manufacturer for assistance. Pls. help.
NOTE: I AM noticing it comes up as an MG5400 instead of the 5420. There are no 5400's in the office at all.

Hi AMPP,
The PIXMA MG5420 does not have bluetooth capability; it can only be connected via USB cable or wirelessly over a network.
This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to fix the error code B200 of MP258 canon printer?

please help me how to fix the priter that has an error code B200 of MP258.

Hi guadaduque, thanks for posting! In order to allow the Community to better help with your question, we'll need some more information from you.
What exact computer operating system are you using? Once we have this information, the Community will be better able to help get you up and printing again!

I have a MP560 which has an error code B200.

I have google searched error code B200, followed the suggestions with no results.
What do I do now?

You are not alone. Take a look at the thread titled
"Call to Arms for the dreaded U052 Wrong Printhead Error"
Always hate to see corporate ripoffs by companies we used to trust.

Transport control program tp ended with error code 0212

Hi all,
I have created a two system landscape of development & production server. But while I am releasing any request from develpoment server a error is showing: " Transport control program tp ended with error code 0212 Errors: could not access file as supposed (see dev_tp or S".I have chosen development server as domain controller. TMS alert viewer error message also contains the following information------>command: TMS_MGR_READ_TRANSPORT_QUEUE
 service: transport service
 start : online
 Function: TMS_TP_SHOW_BUFFER
 message: TP_REPORTED_ERROR
In import monitor it's showing : "tp finished: could not access file as supposed (see dev_tp or SLOG1113.K"
Can you tell me how to resolve this issue?

dev_tp contains:
This is R3trans.exe version 6.14 (release 700 - 09.04.10 - 11:26:00).
unicode enabled version
usage: R3trans.exe [<options>] <control_file>
The control_file describes what R3trans has to do.
The following options are possible:
-c f1 f2 : Copy file f1 to f2 with character set conversion.
-d : DB connect. Test if SAP database is available.
-i file : Import from file without using a control file.
-l file : List the contents of file to the log file.
-m file : List the contents of file to allow tp to create a cofile.
-t : Test. All database changes are rolled back.
-t4 : Trace level 4. Switch on developer trace.
-u <int> : Unconditional modes. See below.
-v : Verbose. Write more details to the log file.
-w file : Log file. The default log file is 'trans.log'.
-x : DB connect without access on any SAP table.
R3trans.exe finished (0012).
& the slog file is not there in the trans/log directory

Installation of Photoshop update 13.1.2 for creative cloud fails with error code U44M1P7 I need help

I need help installing update 13.1.2 for Photoshop creative cloud, installation fails with error code: U44M1P7. Could someone please help?

Sorry to bother you.
I could find the answer after searching previous posts about this language problem.
Had to change my language in AAM profile and then download PS CS6 again ( english version ).
Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
restart application and Voila.
Greetz, Jeroen

SAP on V6R1 - ABAP Import:Program 'Migration Monitor' exits with error code

Hello,
We are doing an installation of SAP NW 7.01 SR1 on V6R1.
 
We were getting error in SAPAPPL2.TSK.bck we merged the files with following command:R3load --merge_only <TSK file> and refering sap note:Note 455195 - R3load: Use of TSK files.
 
We are again getting error in following steps:
 
sapinst.log
 
 WARNING 2009-09-30 23:25:28.477
Execution of the command "Y:\QOpenSys\QIBM\ProdData\JavaVM\jdk14\64bit\bin\java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 OS400 ppc64-64 j9ap64142sr13-20090310 (JIT enabled)
J9VM - 20090309_31291_BHdSMr
JIT - 20090210_1447ifx1_r8
GC - 200902_24)
I mport Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
 Loading of 'SAPNTAB' import package: OK
 Import Monitor jobs: running 0, waiting 27, completed 1, failed 0, total 28.
Import Monitor jobs: running 1, waiting 26, completed 1, failed 0, total 28. 
Import Monitor jobs: running 2, waiting 25, completed 1, failed 0, total 28. 
Import Monitor jobs: running 3, waiting 24, completed 1, failed 0, total 28. 
Loading of 'DOKCLU' import package: OK
Import Monitor jobs: running 2, waiting 24, completed 2, failed 0, total 28. 
Import Monitor jobs: running 3, waiting 23, completed 2, failed 0, total 28. 
Loading of 'SAPAPPL1' import package: OK
Import Monitor jobs: running 2, waiting 23, completed 3, failed 0, total 28. 
Import Monitor jobs: running 3, waiting 22, completed 3, failed 0, total 28. 
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 2, waiting 22, completed 3, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 21, completed 3, failed 1, total 28. 
Loading of 'DD03L' import package: OK
Import Monitor jobs: running 2, waiting 21, completed 4, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 20, completed 4, failed 1, total 28. 
Loading of 'SCPRSVALS' import package: OK
Import Monitor jobs: running 2, waiting 20, completed 5, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 19, completed 5, failed 1, total 28. 
Loading of 'SAPSDIC' import package: OK
Import Monitor jobs: running 2, waiting 19, completed 6, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 18, completed 6, failed 1, total 28. 
Loading of 'SCPRVALS' import package: OK
Import Monitor jobs: running 2, waiting 18, completed 7, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 17, completed 7, failed 1, total 28. 
Loading of 'SAPSSRC' import package: OK
Import Monitor jobs: running 2, waiting 17, completed 8, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 16, completed 8, failed 1, total 28. 
Loading of 'FUPARAREF' import package: OK
Import Monitor jobs: running 2, waiting 16, completed 9, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 15, completed 9, failed 1, total 28. 
Loading of 'TODIR' import package: OK
Import Monitor jobs: running 2, waiting 15, completed 10, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 14, completed 10, failed 1, total 28. 
Loading of 'SEOSUBCODF' import package: OK
Import Monitor jobs: running 2, waiting 14, completed 11, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 13, completed 11, failed 1, total 28. 
Loading of 'E071K' import package: OK
Import Monitor jobs: running 2, waiting 13, completed 12, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 12, completed 12, failed 1, total 28. 
Loading of 'SAPPOOL' import package: OK
Import Monitor jobs: running 2, waiting 12, completed 13, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 11, completed 13, failed 1, total 28. 
Loading of 'SAPSPROT' import package: OK
Import Monitor jobs: running 2, waiting 11, completed 14, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 10, completed 14, failed 1, total 28. 
Loading of 'SAPSDOCU' import package: OK
Import Monitor jobs: running 2, waiting 10, completed 15, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 9, completed 15, failed 1, total 28. 
Loading of 'SAPCLUST' import package: OK
Import Monitor jobs: running 2, waiting 9, completed 16, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 8, completed 16, failed 1, total 28. 
Loading of 'SAPSLOAD' import package: OK
Import Monitor jobs: running 2, waiting 8, completed 17, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 7, completed 17, failed 1, total 28. 
Loading of 'SAPSLEXC' import package: OK
Import Monitor jobs: running 2, waiting 7, completed 18, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 6, completed 18, failed 1, total 28. 
Loading of 'SAPUSER' import package: OK
Import Monitor jobs: running 2, waiting 6, completed 19, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 5, completed 19, failed 1, total 28. 
Loading of 'SAPDDIM' import package: OK
Import Monitor jobs: running 2, waiting 5, completed 20, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 4, completed 20, failed 1, total 28. 
Loading of 'SAPDFACT' import package: OK
Import Monitor jobs: running 2, waiting 4, completed 21, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 3, completed 21, failed 1, total 28. 
Loading of 'SAPDODS' import package: OK
Import Monitor jobs: running 2, waiting 3, completed 22, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 2, completed 22, failed 1, total 28. 
Loading of 'SAPUSER1' import package: OK
Import Monitor jobs: running 2, waiting 2, completed 23, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 1, completed 23, failed 1, total 28. 
Loading of 'SAP0000' import package: OK
Import Monitor jobs: running 2, waiting 1, completed 24, failed 1, total 28. 
Loading of 'SAPAPPL0' import package: OK
Import Monitor jobs: running 1, waiting 1, completed 25, failed 1, total 28. 
Loading of 'SAPSSEXC' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 26, failed 1, total 28. 
 
WARNING[E] 2009-09-30 23:25:28.524
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log,
 
ERROR 2009-09-30 23:25:28.914
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
 
 import_monitor.log.
 ****************************************************************************************************************************************************
 INFO: 2009-09-30 23:26:33 com.sap.inst.migmon.LoadTask run
Loading of 'SAP0000' import package is successfully completed.
 
INFO: 2009-09-30 23:30:31 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is successfully completed.
 
INFO: 2009-09-30 23:31:16 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is successfully completed.
 
WARNING: 2009-09-30 23:31:31
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2009-09-30 23:31:31
1 error(s) during processing of packages.
INFO: 2009-09-30 23:31:31
Import Monitor is stopped.
 *************************************************************************************************************************************************
 SAPAPPL02.LOG
 **************************************************************************************************************************************************
 TVV1 in *LIBL type *FILE not found. MSGID= Job=015908/SAPINST/QJVAEXEC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) INFO: TVV1 created #20091001110304
 
(DB) INFO: TVV1 deleted/truncated #20091001110304
 
(IMP) INFO: import of TVV1 completed (0 rows) #20091001110304
 
(DB) ERROR: DDL statement failed 
(ALTER TABLE "TVV1" DROP PRIMARY KEY ) 
DbSlExecute: rc = 99 
(SQL error -539) 
error message returned by DbSl:
Table TVV1 in R3E04DATA does not have a primary or unique key. MSGID= Job=015908/SAPINST/QJVAEXEC
Your inputs will help a lot.
Regards,
Prasad

Hello,
We are doing an installation of SAP NW 7.01 SR1 on V6R1.
 
We were getting error in SAPAPPL2.TSK.bck we merged the files with following command:R3load --merge_only <TSK file> and refering sap note:Note 455195 - R3load: Use of TSK files.
 
We are again getting error in following steps:
 
sapinst.log
 
 WARNING 2009-09-30 23:25:28.477
Execution of the command "Y:\QOpenSys\QIBM\ProdData\JavaVM\jdk14\64bit\bin\java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 OS400 ppc64-64 j9ap64142sr13-20090310 (JIT enabled)
J9VM - 20090309_31291_BHdSMr
JIT - 20090210_1447ifx1_r8
GC - 200902_24)
I mport Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
 Loading of 'SAPNTAB' import package: OK
 Import Monitor jobs: running 0, waiting 27, completed 1, failed 0, total 28.
Import Monitor jobs: running 1, waiting 26, completed 1, failed 0, total 28. 
Import Monitor jobs: running 2, waiting 25, completed 1, failed 0, total 28. 
Import Monitor jobs: running 3, waiting 24, completed 1, failed 0, total 28. 
Loading of 'DOKCLU' import package: OK
Import Monitor jobs: running 2, waiting 24, completed 2, failed 0, total 28. 
Import Monitor jobs: running 3, waiting 23, completed 2, failed 0, total 28. 
Loading of 'SAPAPPL1' import package: OK
Import Monitor jobs: running 2, waiting 23, completed 3, failed 0, total 28. 
Import Monitor jobs: running 3, waiting 22, completed 3, failed 0, total 28. 
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 2, waiting 22, completed 3, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 21, completed 3, failed 1, total 28. 
Loading of 'DD03L' import package: OK
Import Monitor jobs: running 2, waiting 21, completed 4, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 20, completed 4, failed 1, total 28. 
Loading of 'SCPRSVALS' import package: OK
Import Monitor jobs: running 2, waiting 20, completed 5, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 19, completed 5, failed 1, total 28. 
Loading of 'SAPSDIC' import package: OK
Import Monitor jobs: running 2, waiting 19, completed 6, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 18, completed 6, failed 1, total 28. 
Loading of 'SCPRVALS' import package: OK
Import Monitor jobs: running 2, waiting 18, completed 7, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 17, completed 7, failed 1, total 28. 
Loading of 'SAPSSRC' import package: OK
Import Monitor jobs: running 2, waiting 17, completed 8, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 16, completed 8, failed 1, total 28. 
Loading of 'FUPARAREF' import package: OK
Import Monitor jobs: running 2, waiting 16, completed 9, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 15, completed 9, failed 1, total 28. 
Loading of 'TODIR' import package: OK
Import Monitor jobs: running 2, waiting 15, completed 10, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 14, completed 10, failed 1, total 28. 
Loading of 'SEOSUBCODF' import package: OK
Import Monitor jobs: running 2, waiting 14, completed 11, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 13, completed 11, failed 1, total 28. 
Loading of 'E071K' import package: OK
Import Monitor jobs: running 2, waiting 13, completed 12, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 12, completed 12, failed 1, total 28. 
Loading of 'SAPPOOL' import package: OK
Import Monitor jobs: running 2, waiting 12, completed 13, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 11, completed 13, failed 1, total 28. 
Loading of 'SAPSPROT' import package: OK
Import Monitor jobs: running 2, waiting 11, completed 14, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 10, completed 14, failed 1, total 28. 
Loading of 'SAPSDOCU' import package: OK
Import Monitor jobs: running 2, waiting 10, completed 15, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 9, completed 15, failed 1, total 28. 
Loading of 'SAPCLUST' import package: OK
Import Monitor jobs: running 2, waiting 9, completed 16, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 8, completed 16, failed 1, total 28. 
Loading of 'SAPSLOAD' import package: OK
Import Monitor jobs: running 2, waiting 8, completed 17, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 7, completed 17, failed 1, total 28. 
Loading of 'SAPSLEXC' import package: OK
Import Monitor jobs: running 2, waiting 7, completed 18, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 6, completed 18, failed 1, total 28. 
Loading of 'SAPUSER' import package: OK
Import Monitor jobs: running 2, waiting 6, completed 19, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 5, completed 19, failed 1, total 28. 
Loading of 'SAPDDIM' import package: OK
Import Monitor jobs: running 2, waiting 5, completed 20, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 4, completed 20, failed 1, total 28. 
Loading of 'SAPDFACT' import package: OK
Import Monitor jobs: running 2, waiting 4, completed 21, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 3, completed 21, failed 1, total 28. 
Loading of 'SAPDODS' import package: OK
Import Monitor jobs: running 2, waiting 3, completed 22, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 2, completed 22, failed 1, total 28. 
Loading of 'SAPUSER1' import package: OK
Import Monitor jobs: running 2, waiting 2, completed 23, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 1, completed 23, failed 1, total 28. 
Loading of 'SAP0000' import package: OK
Import Monitor jobs: running 2, waiting 1, completed 24, failed 1, total 28. 
Loading of 'SAPAPPL0' import package: OK
Import Monitor jobs: running 1, waiting 1, completed 25, failed 1, total 28. 
Loading of 'SAPSSEXC' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 26, failed 1, total 28. 
 
WARNING[E] 2009-09-30 23:25:28.524
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log,
 
ERROR 2009-09-30 23:25:28.914
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
 
 import_monitor.log.
 ****************************************************************************************************************************************************
 INFO: 2009-09-30 23:26:33 com.sap.inst.migmon.LoadTask run
Loading of 'SAP0000' import package is successfully completed.
 
INFO: 2009-09-30 23:30:31 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is successfully completed.
 
INFO: 2009-09-30 23:31:16 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is successfully completed.
 
WARNING: 2009-09-30 23:31:31
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2009-09-30 23:31:31
1 error(s) during processing of packages.
INFO: 2009-09-30 23:31:31
Import Monitor is stopped.
 *************************************************************************************************************************************************
 SAPAPPL02.LOG
 **************************************************************************************************************************************************
 TVV1 in *LIBL type *FILE not found. MSGID= Job=015908/SAPINST/QJVAEXEC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) INFO: TVV1 created #20091001110304
 
(DB) INFO: TVV1 deleted/truncated #20091001110304
 
(IMP) INFO: import of TVV1 completed (0 rows) #20091001110304
 
(DB) ERROR: DDL statement failed 
(ALTER TABLE "TVV1" DROP PRIMARY KEY ) 
DbSlExecute: rc = 99 
(SQL error -539) 
error message returned by DbSl:
Table TVV1 in R3E04DATA does not have a primary or unique key. MSGID= Job=015908/SAPINST/QJVAEXEC
Your inputs will help a lot.
Regards,
Prasad

SAP ECC error:'Migration Monitor' exits with error code 103.

Hi All,
I am doing SAP ECC installation for windows 32 bit with MAXDB as backend.
I am stuck at the import ABAP.Getting error
ERROR 2008-08-08 16:10:53
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
1) imort_monitor.java.log-->contains
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 0, completed 18, failed 0, total 19.
Loading of 'SAPVIEW' import package: ERROR
Import Monitor jobs: running 0, waiting 0, completed 18, failed 1, total 19.
2)import_monitor.log
ERROR: 2008-08-08 16:10:36 com.sap.inst.migmon.LoadTask run
Loading of 'SAPVIEW' import package is interrupted with R3load error.
Process 'D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -nolog -c 0' exited with return code 2.
For mode details see 'SAPVIEW.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
INFO: 2008-08-08 16:10:52
All import packages are processed.
WARNING: 2008-08-08 16:10:52
1 error(s) during processing of packages.
INFO: 2008-08-08 16:10:52
Import Monitor is stopped.
3)SAPVIEW.log
error message returned by DbSl:
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE VIEW "Z_T_CO_BW" ( "KOKRS" , "KOSTL" , "VERSN" , "KSTAR" , "WOG001" , "MEG001" ) AS SELECT T0002."KOKRS", T0002."KOSTL", T0001."VERSN", T0001."KSTAR", T0001."WOG001", T0001."MEG001" FROM "COSS" T0001, "CSKS" T0002 WHERE T0002."MANDT" = T0001."MANDT")
DbSlExecute: rc = 103
(SQL error -942)
error message returned by DbSl:
(DB) INFO: disconnected from DB
D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: job finished with 3108 error(s)
D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080808174211
Only SAPDB: SAPSID srvice of SAP DB is only up.
No other services of database are up.And i am not able to up the other services also.
Is it required to up the other services?
If not?
Why this error is occuring?
Any help will be appreciated.
Thanks&Regards
Manisha das

Hello Manisha,
The one of the possible reasons for this is due to lack of H/W.
Increase your RAM size to atleast 2GB and utilise the same while you are installing ECC in database parameters step..
If the issue is with H/W, then this should fix the issue.
Hope it helps,
Regards,
Satish.

DAG - Backup failing on 1 DB only with error - The Microsoft Exchange Replication service VSS Writer instance ID failed with error code 80070020 when preparing for a backup of database 'DB012'

Hi Board,
i´ve search across the board, technet and symantec sites but did not found a hint about my problem.
we drive a 2 node DAG (Location1-Ex1-mb1
Location2-exc1-mb1), on SP2 RU4 patchlevel with 40 Databases.
Since some time the backup of one - and only one DB - is failing with these events, logged on the Mailboxserver on which the passive DB is hosted.
Log Name:      Application
Source:        MSExchangeRepl
Date:          28.09.2012 00:37:17
Event ID:      2112
Task Category: Exchange VSS Writer
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Location1-Exc1-MB1
Description: The Microsoft Exchange Replication service VSS Writer instance 1ab7d204-609a-4aea-b0a7-70afb0db38de failed with error code 80070020 when preparing for a backup of database 'DB012'.
Followed by
Log Name:      Application
Source:        MSExchangeRepl
Date:
01.10.2012 03:33:06
Event ID:      2024
Task Category: Exchange VSS Writer
Level:         Error
Keywords:      Classic
User:
N/A
Computer:      Location1-Exc1-MB1
Description:
The Microsoft Exchange Replication service VSS Writer (Instance 42916d80-36c1-4f73-86d0-596d30226349) failed with error 80070020 when preparing for a backup.
The backup Application - Symantec Backup Exec 2010 R3 – states, this error
Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
Check the Windows Event Viewer for details.
Writer Name: Exchange Server, Writer ID: {76FE1AC4-15F7-4BCD-987E-8E1ACB462FB7}, Last error: The VSS Writer failed, but the operation can be retried (0x800423f3), State: Stable (1).
Symatec suggests within http://www.symantec.com/business/support/index?page=content&id=TECH184095
to restart the MS Exchange Replication Service – BUT the mentioned eventID
8229 isn´t present on any of the both Mailboxservers.
The affected Database is active on Location2-Exc1-Mb1 Server and in an overall healthy state. I found during my research, that below Location2-Exc1-Mb1 Server, there are not removed shadow copies present!
This confuses me, since all Backups are normally taken from the passive copy of a Database.
So my questions to the board are:
* Does anyone is facing similar issues?
* Can someone explain why snapshots are present on the Mailboxserver hosting the Active Database, whilst the errors are logged on the passive one?
-          * Does someone know the conditions, why shadows copies remain and
aren´t removed in a proper manner?
What can cause the circumstance, that only 1 DB is facing such issues?
Any suggestion is welcome!
BR
Markus

Hi Lenora,
I´ve encreases VSS / Exchange Backup Log levels to expert, before starting
those things i´ve all tried now:
- Backup from passive DB (forced within Symantec Backup Exec)
- Backup from active DB (forced within Symantec Backup Exec)
- Backup from passive DB without GRT enabled (forced within Symantec Backup Exec)
- Backup from active DB without GRT enabled(forced within Symantec Backup Exec)
All those attempts failed.
But brought some more details - the backup against the active DB states, that there is still a backup in progress and therefore this backup is cancelled by VSS.
The Solution was, that i´ve needed to restart the Exchange Replication Service on the Mailbox Server hosting the passive DB.
Backups are working again on all DBs!
THX for your replys.
Best regards
Markus

Stock variance report Crashes with error code REP-56048

SR : 6990718.992
gtcr : http://qmon.oraclecorp.com/qmon3/quickpicks.pl?t=t&q=6990718.992
Problem Statement : When the user is trying to generate report for Stock variance report from Oracle Retail Merchandising System the report crashes with error code REP-56048.
The steps to reproduce are specific to Oracle Retail Merchandising system application and hence I have not mentioned here.
The REP-56048 error seems to be generic. Could you please advise me on this issue.
Thanks & Regards,
Sameer

You can review the following Oracle Metalink Document;
Comprehensive REP-56048 Troubleshooting and Overview Guide: Doc ID: Note:285281.1
https://metalink.oracle.com/metalink/plsql/f?p=130:14:88153902823984055::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,285281.1,1,1,1,helvetica
Hope it would be useful.
Adith

Failed to Open FR report With Error code 500 - 'unable to process request'

I am running a load test against PBCS service. The service is load-balanced with 2 managed servers : EPMServer0 and EPMServer1
When I put the loads with 60 VUs -- all visiting FR reports, the service runs without error. But when the VU# increased to 90, it began to respond with Error code 500 - 'unable to process request'.
I tried to correlate the FRLogging logs to the errors, and found during the time those error happens, there are logs like this:
>>>>>>>>>>>>>>>>>>>>>>>>>>
[2013-09-27T05:21:29.325+00:00] [EPMServer0] [WARNING] [00365] [oracle.EPMFR.core] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: sysname50134114.PerfUser0439] [ecid: 004tpQ^VFHT7m3RLIYDCif0007a30002bD,0:2:1:1] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_CLASS: com.hyperion.reporting.connection.UserConnection] [SRC_METHOD: openConnection] User authentication information is invalid. Unable to connect to datasource.[[
com.hyperion.reporting.util.HyperionReportException: Error connecting to database connection Vision:Plan1: Failed to sync with user provisioning.com.hyperion.planning.HspRuntimeException
 at com.hyperion.reporting.connection.UserConnection.openConnection(Unknown Source)
 at com.hyperion.reporting.connection.UserConnection.openConnection(Unknown Source)
 at com.hyperion.reporting.connection.UserConnection.<init>(Unknown Source)
 at com.hyperion.reporting.connection.ConnectionManager.getConnection(Unknown Source)
 at com.hyperion.reporting.connection.ConnectionManager.getCube(Unknown Source)
 at com.hyperion.reporting.connection.ConnectionManager.getCube(Unknown Source)
 at com.hyperion.reporting.webviewer.WebDynamicReport.validateDatasources(Unknown Source)
 at jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrhtmlreport._jspService(__hrhtmlreport.java:1999)
 at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
 at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
 at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
 at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at com.hyperion.reporting.webviewer.HRSecurePagesFilter.needAuthentication(Unknown Source)
 at com.hyperion.reporting.webviewer.HRSecurePagesFilter.doFilter(Unknown Source)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at com.hyperion.reporting.webviewer.FRClusterHelper.doFilter(Unknown Source)
>>>>>>>>>>>>>>>>>>>>>>>>>
It looks like the servlet failed to open the datasource connection while handling the FR requests. But there are several data sources. My questions are:
1) Which datasource is corresponding to the issue? Is it EPMSystemRegistry?
2) What is the recommended configuration for the connection pool max capacity setting? -- current setting for EPMSystemRegistry is 30
3) Whether it could be a connection leak problem as only 90 concurrent end user is visiting and it failed to connect?
Thanks,
Ellick Lu
Type
JNDI Name
Targets
aif_datasource
Generic
jdbc/aif_datasource
EPMServer
calc_datasource
Generic
jdbc/calc_datasource
EPMServer
EPMSystemRegistry
Generic
jdbc/EPMSystemRegistry
EPMServer
odiMasterRepository
Generic
jdbc/odiMasterRepository
EPMServer
planning_datasource
Generic
jdbc/planning_datasource
EPMServer
raframework_datasource
Generic
jdbc/raframework_datasource
EPMServer

It is checking for Database connection in Workspace. Check Editing Database Connections
Can those users login to Planning? Do they have correct security setup (I guess not)
Regards
Celvin
http://www.orahyplabs.com

The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.

I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!

Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li

SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has be

Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application
He got this error
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
and When I see the log event after that error, it comes with another error.
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
He has IIS5 and me too.
I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
and in the connection string I have.
<add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SE\levalencia.
Thats strange.
The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
If you want me to send logs please tellme

Well here's my problem, maybe you can help. Intermittenly I get a login failed when connecting to a db engine through Server Management Studio using Windows authentication. When this happens the following entries are generated on the server's application event log:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (4)
Event ID: 17806
Date: 1/14/2009
Time: 10:41:31 AM
User: N/A
Computer: <server name>
Description:
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: <ip address>]
Event Type: Failure Audit
Event Source: MSSQLSERVER
Event Category: (4)
Event ID: 18452
Date: 1/14/2009
Time: 10:41:31 AM
User: N/A
Computer: <server name>
Description:
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: <ip address>]
I've already ensured that the server is set to mixed authentication mode. Oddly enough, the workaround that I've found is that if I remote desktop into the server, log in and then log back out, Management Studio is suddenly able to connect again. No idea why it works.
As I said before, it is intermitten. Some days it errors on login, other days it doesn't and there are no configuration changes between them. Also, both client and server are in the same domain and same site so there is no VPN or anything in between. I'm really quite stumped. Any help would be great, or if you can point me in the right direction of where to look. Thank you in advance!

Transport control program tp ended with error code 0208

Hello
I installed minisap NW2004s on XP/SP2 VMWARE 4.5. The installation it self's works fine, but have some problems in the stms. when i call the transport queue there appears an error as follow:
System   NSP              Command TMS_MGR_READ_TRANSPORT_QUEUE
Client   000              Service Transport Service
User     TMSADM           Start    Online
Date     12.10.2006       Function TMS_TP_SHOW_BUFFER
Time     07:13:13         Message TP_REPORTED_ERROR
Transport control program tp ended with error code 0208
Errors: error in transportprofil (param missing
unknown,.
Any Idea? Thanks for your help.
Regards, George

Hi
You can edit the parameter profile using RZ10 and RZ11. You should not copy but manually edit the parameters. Also you need to make a consistency check so that the parameters will be copied to the database from the OS level. You will find an option to perform consistency check in RZ11.
Hope that helps.

Transport control program tp ended with error code 0211

Dear Experts,
I have a problem in doing the import after the client export was successfully done.
I am actaully tring to do a client import/export from the PRD server to DEV server.
On PRD the client is 900 and on the DEV the client is 240.
I have manually copied the transport requests created into the
/usr/sap/trans/cofiles and /usr/sap/trans/data folders to the same on the DEV server.
After coping them,
I have tried to add these transport requests to the DEV server queue, i get the following error message
Transport control program tp ended with error code 0211
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: ADDTOBUFFER RT2KT00014 RT1 pf=/usr/sap/trans/bin/T
Return code: 0211
Error text: no info about transport request found
Request: RT2KT00014
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.
After this I have tried to add the transports to the buffer at the OS level using the command
./tp pf=TPPARAM addtobuffer "RT2KT00014" RT1 U18 by going to the folder
/usr/sap/trans/bin
But it says that the tp is not found.
I have also checked the permissions for the TRANS folder, it has full access i.e 777
This is where i am struck, and the client has to be imported asap as the requirement for the SUPPORT TEAM is very urgent.
We are on AIX, Oracle 10G and ECC6
Thanks and regards
Harry

Dear Imtiaz,
Thanks for your quick fire reply...
The link helped me but it could not resolve my issue..
Infact i found it my self that the transport requests had to be given full FILE PERMISSIONS at the OS level
I logged in as ROOT
and changed directory to /usr/sap/trans/cofile and gave the command
chmod 777 RT00014.RT2 and
chmod 777 RX00014.RT2
and then went to STMS>SYSTEMS>Import View>Extras>Other requests--> Add ..
Here i added the request nos and then it added up in the queue and then i started the import.
Anyway thank you very for your reply..
Awareded points to you.
Thanks and regards
Harry...

PIXMA MX922 with error code B200

Similar Messages

Maybe you are looking for