Pixma printer adding color while trying to print black and white.

I've had this printer (Pixma MG5320) for about a year and a half now and recently noticed a problem with it. I have been doing a lot of black and white photography lately (both digital and analog), and every black and white photo I print has some color fo it. For instance I printed out a black and white digital picture I took recently that I edited using Nik's Silver Efex Pro. Instead of the picture coming out black and white, it has an orange/red hue to it throughout the image, yet on my monitor it is void of all colors (except shades of black and white of course). A few months ago I tried to print another picture, and it had a blueish/green hue printed throughout the picture as well.
I am printing all these photos via Photoshop, and even went into the settings to click on "grayscale printing" but the problem still persists. The printer does this with both brand new ink cartridges and ones that have been used before. I can't figure out if there is some odd setting in Photoshop that I may have accidently messed around with (though there really shouldn't be), or if it's an issue with the printer itself. If I print a color photo, all the colors seem about right and I don't notice an off hue on any of them.
Does anyone know what could cause this? I am just trying to troubleshoot the whole ordeal because it's gotten to the point where printing b&w photos is not in question until I figure this issue out.

Hi, georgeisabamf!
Thanks for posting on our forum! This community is designed for your fellow Canon owners to help each other out with any problems they may encounter. If this is a time-sensitive matter, contacting our US-based technical support team is the most efficient way to get these issues straightened out. They're standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

Similar Messages

How can I convert a pages color document to a PDF Black and White doc.

How can I convert a pages color document to a PDF Black and White doc. Or, covert the color to B&W in a new doc?

> How can I convert a pages color document to a PDF Black and White doc. Or, covert the color to B&W in a new doc?
The general idea is that you colour correct photographs once, archive, and convert with or without colour changes. The archived photograph is unchanged - or we would be colour correcting the same photographs again and again and again.
If you have a photograph with a corrected exposure, you can open the photograph in the Apple ColorSync Utility, apply a colour space conversion to a grayscale appearance using the preinstalled ICC profile, save the photograph under another name, and place that in your pagination.
If you have a paginated document with corrected exposures, and any such non-scalable bitmap or scalable spline graphics as you have chosen to add, you can render the pagination as a whole to PDF through the same ICC profile, carrying out the same colour space conversion on any and all objects.
Caveat: If you intend the pagination for certain processes, in particular offset lithography, then you are probably expected not to render the type to grayscale, but rather to render it to single ink solid black. No software can determine what printing process you intend, you have to understand a bit about printing, and how to set up general colour space conversions in software. Ask your prepress provider, and if the answer is not prompt and proficient, pick another provider.
/hh

Is there a way to color one thing in a black and white photo. Example: I have a picture of a tulip field and I want to make it black and white - which I have already done - but I want to make one single tulip red. Help?

Is there a way to color one thing in a black and white photo. Example: I have a picture of a tulip field and I want to make it black and white - which I have already done - but I want to make one single tulip red. Help?

No, you'll need an external editor for the job:
In order of price here are some suggestions:
Seashore (free)
The Gimp (free)
Graphic Coverter ($45 approx)
Acorn ($50 approx)
Pixelmator ($50 approx)
Photoshop Elements ($75 approx)
There are many, many other options. Search on MacUpdate. You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

How do I convert a color jpg to a pure black and white jpg with no grey/shading?

how do I convert a color jpg to a pure black and white jpg with no grey/shading using Automator?

Hi mns579,
Thanks for your swift reply.
I'm afraid that sequence leads to a burn-out of some of the black text, making it unreadable.
To clarify, what I did was photograph pages from a book. The interior lighting of the room where I photographed these pages leads to a jpg image with slight graying or shading of parts of the page. So when I simply convert it to B/W, I get a washing out of some areas of the page where there is text, and this makes it unreadable.
I know that some software programs have a feature that allows a color jpg to be converted to b/w such that the text is made pure black and any surrounding areas of the text are made pure white (ie, all color is removed from the non-black areas), which makes for an easily readable b/w text page. Am I able to do this with my Mac, and if so, how using the Automator feature?
(I have more than 50 jpgs that I would like to clean up in this manner, hence the ability to do so through Automator is important.)
Thanks for your attention to this.

I own an ipod touch 5th gen ios 7.1 and while using it suddenly black and white vertical stripes appeared on the screen and now it wont turn on!!!what should i do?

i own an ipod touch 5th gen ios 7.1 and while using it suddenly black and white vertical stripes appeared on the screen and now it wont turn on!!!what should i do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Converting a Color Cad file into a Black and White .pdf

My company recently bought me Adobe Acrobat XI-Professional as an upgrade from Adobe Acrobat 9-Standard. As such, one of the tasks assigned to me was to take color CAD drawings (.DWG extension) created in AutoCAD 12 and then convert them into black-and-white .pdf files. I recognize that there is a "Print in grayscale (black and white) option, but I'm finding that all of the text used in the CAD drawing (generally yellow and cyan) is coming out in grey rather than black against white. I need all of the colors to generally be black.
Is there a solution that I'm overlooking?
Thanks in advance!

Hi TTownWriter,
On conversion Yellow, cyan and red etc convert as grey instead of Black.
This is an expected behavior.
Regards,
Rave

Only one person coloured while all around is black and white

I'm wondering if it is possible to maintain in a clip only one person coloured while other people and background go black and white... (it is a normal shot, not chroma key)

yes you can, it is called rotoscoping, essentially you need to create a mask and animate it with key frames for the duration required. Motion or AE probably your beat bet. There are a few other options depending on your footage and how you shot it but given that you have other moving subjects inthe frame masking may be the easiest.
Tony

My color video is capturing in black and white.

I'm using final cut pro version 3.0 and for some reason my video, which I'm absolutely positive is in color, is capturing on my computer in black and white. Does anybody have any idea why this is happening? Any help would be greatly appriciated.
Mac OS X (10.3.5)

I have to use the media converter because I can't capture directly from the tape deck. I guess it's converting the recording on the tape to something digital that will work on the computer. There's no way to hook up a firewire to the tape deck.
I would say it's the media converter but I used it on another computer a few days ago and it worked fine. I think it's something wrong with the computer or the program. This one in particular seems to be having problems. Apparently this has happened before.

Color differs in richness between black and white 30gb iPods

Has anybody noticed that the color on the newer black iPods is not as rich as it is on the white iPods? My friend just bought a white one, and I just bought it in black, and in comparing the color, his is much better in detail and fullness.
iBook G4 Mac OS X (10.3.7)

Go to System Preferences > Universal Access > Seeing tab and in the display section uncheck the "Use grayscale" checkbox.
Hope this helps...
(If the box was not checked, post back and we'll try some other steps.)

How can I put 1 object in a photo in color but the rest in black and white?

I have iPhoto '08, and I have seen many photos that have interesting effects like the one I mentioned before. I would really like to know how I can allow the main object in the photo to remain its natural color, but change the rest of the picture to black/white or sepia.

Welcome to the Apple Discussions. You mean like this?
Click to view full size
This was created by Photoshop. But it's a little over the top for must of what we want to do. Photoshop Elements can do the same as can some of Larry's other suggestions. I've worked with PSE and it's an excellent editor with about 75% of PS's capabilities at about 1/7 the price.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

Problem with PDF viewing Colors not showing correctly (or black and white)

My iMac and my Macbook are both not showing the pictures in a PDF correctly. My collegue who uses a Macbook has no issues.
Im using version 10.7.5 on my macs.
I have tried using the standard ' Preview' as wel as two different free PDF vieuwers from the Appstore.
Also the sender of the document has no issues as wel with the PDF document she made with Indesign.
I'm sure it has to do with my computers, but where do I have to look?
Thanks for helping.
Anything that might be helpfull.

Since InDesign documents are truly PDF compliant I would, were I you, use a truly PDF compliant viewer - Adobe Reader.
To learn how Preview can really screw up a PDF document (and this is just a simple form) see -> http://khkonsulting.com/2013/06/preview-app-killer-of-pdf-files/.
Clinton

Printing in Black And White

I'm using iPhoto '08 7.1.5 and trying to print a color photo that I made black and white and it only prints the blackest blacks and the whitest whites, but nothing in between, giving me a partially printed picture. Is there some kind of setting that will allow me to print the entire picture in black and white? Any help is greatly appreciated!

Welcome to the Apple Discussions. Check the various printer setting panes from the menu in the print window for one that has a grayscale checkbox or setting. . For my Canon the grayscale box is located in the Quality and Media section. For my Epson printer it's in the Print Settings section under the Color menu. Select it and try again.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

HT4356 How do I AirPrint in black and white from my iPad so I do not waste the color ink unnecessarily? I never see the option to choose printing in black and white.

How do I AirPrint in black and white from my iPad2 wifi/3G so I do not waste the color ink unnecessarily? I never see the option to choose printing in black and white. I have an Epson Workforce 845 printer.

There is no option to force black and white ouput.
You can request the feature here:
http://www.apple.com/feedback/ipad.html

OSX Print in Black and White on an HP Color printer?

I have an HP8500 Color printer connected to OSX 10.8.3 through a JetDirect port. The OSX Driver for the HP8500 does not have the option to print in color or B&W that the windows driver has. As a consequence, even when printing in B&W from a PPT deck, the driver prints using all four color toners to produce a black and white output that looks like it has a hint of purple in it. Is there a different driver I could use that has the option to select black or color output? As it is I'm buring through very expensive color toner for balck and white docs.

The Officejet Pro 8100 ePrinter has the same print mechanism as its All-in-One counterpart the Officejet Pro 8600. This printer has a printhead mechanism that contains 4 individual cartridges: CMYK (cyan/magenta/yellow/black).
One will have to replace the cartridge, if the unit provides a message of one of the colors being empty, before the unit will resume printing. It is a maintenance mechanism to prevent the product from self-damage. Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Color LaserJet 2605dn Printing only Black and white

I have a Color Laserjet 2605dn and all of the color ink cartridges have run dry. However the Black cartridge has over 2,000 pages of ink in it and the printer will not let me prink only Black and White. It seems the color cartridges must also have ink in them in order for the printer to print. Does anyone know a work around so that I can print with the Black Cartridge and not purchase the color cartridges?
This question was solved.
View Solution.

Hello,
Thanks for the post. I've attached a link below that may assist. Good Luck!
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Pixma printer adding color while trying to print black and white.

Similar Messages

Maybe you are looking for