Pixma Pro-10 stops printing in middle of an image.
Pixma Pro-10 stops printing in middle of an image. It is wireless, using OS Windows 7 - 64 bit. It doesn't do it all the time but the larger images (13x19) have more problems. I am using LightRoom 5 and Canon Print Studio Pro to print the image. Very frustraing especially when it gets to 1 inch of finishing an image and decides it done. Thank you for your assistance.
If it doesn't do it all the time is it possibly losing wireless signal? How close/far is printer from the wireless router?
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472
Similar Messages
-
Canon pro 1 stops printing in middle of an image
help
Solved!
Go to Solution.Hi ohd13!
To have a better understanding of your issue, please let everyone know what operating system (Windows Vista/7/8 or Mac OS 10.X) you are using. That way, community will be able to assist you with suggestions appropriate for your product.
If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team.
Thanks! -
Pcs 1610 all in one stops printing in middle of web page prints shows error-reset on q.
when i try to print coupons and other web page prints printing starts then stops in the middle of page the read out on the printer shows printing when i try to either turn off or cancel print out on the printer nothing happens i can only unplug printer to get it to release. also must cancel document in q. to remove problem. paid iyogi big bucks they say it must be hardware, and of course it is long out of warranty. XP system
I'm having trouble finding a product for the HP 4550 all-in-one. I can find an HP 4550 laserjet and an HP Photosmart c4500 series printers. Can you provide more detail about the product?
Looking at your post and the fact that the shadow appeared after you replaced the black cartridge, I wonder if this is caused because your cartridges aren't aligned. If your product has a LCD screen, look for an option to align your cartridges - likely under 'tools' or something like that in the menu. Try aligning the cartridges and see if that helps.
If you can provide some more details about your product, I could point you to more detailed alignment steps.
I am an HP employee. -
Wireless Officejet pro 8900 stopped printing
Our Officejet 8500 A909g mysteriously stopped printing wirelessly today. Windows (7) is unable to troubleshoot and it is happening from both the household laptops.
I've tried turning it on and off,
Turning the Wifi router off, printer off, wifi on, printer on
Changing out nearly empty cartridges
Typing in the printer's IP address., which shows status as ready.
Printer will print test pages through IP address, but will not print test pages through Windows,
Attempts to install a duplicate copy of the printer through Windows devices fails.
I'm out of ideas. Can anyone help me?
Thanks in advance.
Laura (Personal information removed)
This question was solved.
View Solution.Hi @hedgemeister,
Welcome to the HP Support Forums! I see you are not able to print wirelessly to your HP Officejet Pro 8500, you are using the Windows 7 Operating system. To better help you can you please leave me with the following information:
1. Do you get any error messages when you attempt to print?
2. Have you recently made any changes to your computer, updates, firewalls etc?
3. Does the print job send to the print queue and then disappear?
I would like you to run the HP Print and Scan Doctor > www.hp.com/go/tools
-- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know what the PSDR finds, I look forward to hearing from you.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
HP color laserjet pro cm1415 stopped printing on my wifi network.
It used to print fine, then about 2 weeks ago, just stopped. The print job sends OK, but then sits in the queue for a minute or so, and then it says "error". I've removed and re-installed the software, rebooted the routers, computers, and printer, but it didn't help. I also tried Microsoft fix-it utility and HP Print & Scan Doc, but nothing helps. Any ideas?
It sounds like there may be a communication issue with the computer and printer.
Try using the HP Print and Scan Doctor as it is designed to resolve many printing issues. It will try to correct any issues automatically. If it does not, then it will give more information about how to correct the issue.
The link provided also has some information about how to use the tool.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
Stops printing in middle of a job
Recently I have been having problems with my printer stopping and giving me an error message saying it can't print the document after several pages have already printed. The amount if time, paper and ink I have wasted printing pages that have only half printed or not printed at all is getting frustrating. I am working on printing a large document but only printing small portions at a time (less than 10 pages). I have already tried reinstalling the drivers which did not seem to help. Thanks for any help.
Take a look at this link from Microsoft.
-
Elements 11 not allowing Canon Pixma Pro 100 to print
I just installed and updated a new Canon Pro 100 printer. I can print from the organizer but not the editor. I was getting a response of printer not recognized when in editor mode, no errors and pprint this organizer. It says Photoshop cannot this document.
Finally figured it out. You have to use the exact margins of what is suggested in the beginning and the image size can't go over that even if there isn't any image/text in it.
-
My HP Officejet Pro 8600 stopped printing and display went blank although machine was on.
My display screen went blank and printer stopped working. I followed online troubleshooting instructions and got printer and scan to work again by using computer however the display screen is still blank. The arrows and home button on the sides light up. the only thing I noticed before this all happened is the ink was low. Any suggestions?
My display screen went blank and printer stopped working. I followed online troubleshooting instructions and got printer and scan to work again by using computer however the display screen is still blank. The arrows and home button on the sides light up. the only thing I noticed before this all happened is the ink was low. Any suggestions?
-
Photoshop CS4 won't print on a new Canon Pixma Pro 10 - Mac Yosemite -
New Epson Pixma Pro 10. Printer works well with other applications, but just sends out blank pages when printing from Adobe Photoshop CS4. Canon suggested I use their plug, Print Studio Pro, and this worked with a file with layered images and text. However, it would not work with a file that had 3 text layers (two of which were hidden) unless I flattened the image. According to Canon, the plug in is supposed to work only with jpegs, but it did work with psd and tifs (when flattened). Any ideas on how I can get it to work directly from Photoshop.
Oletimer wrote:
Thanks for your help - I did find and download the Photoshop update to 11.0.2 and went to the Yosemite developer page you mentioned and do not see how to download the update, so I guess I will just have to wait for that to be released.
That's fine, you should do OK with Yosemite 10.10.1.
I'm glad you found the CS4 11.0.2 update. I nearly hit the roof when I read another post of yours with the "suite auto updates" nonsense after I had explained to you why one cannot rely on Adobes utterly useless auto updaters.
The hapless Adobe auto updater team in India began to get their act together only as of the CS6 updates, but they are back to their unparalleled incompetence in CC and CC2014.
In case you missed it, here's the link to the latest Canon Printer Drivers v3.1 for OS X from Apple, available to the general public, which sounds a lot newer than what you have. There's no reason for you to stick to "Print Studio 1.3.6" whatever that may be.
Canon Printer Drivers v3.1 for OS X
Let me know if you make any progress with your issue. -
Acrobat 9.2.0 Pro Extednded deffective print to PDF
PC: Win7 Home Premium;
Recently have had no success with printing to PDF using Acrobat 9.2.0 Pro Extednded. After some malware infection Acrobat 9.2.0 Pro Extednded stopped printing to PDF. Cleaned out the malware, did a fresh reinstall of PDF 9.6.2 Pro Extended and still no success.
Does an "uninstall" efficiently remove all previous related Acrobat files, or are there lurking remnants that need manual cleaning?
Is there an upgrade patch fix for Acrobat 9.2.0?Hi GlitchMobile2,
The current version of Acrobat 9 is 9.5.1. I would suggest launching Acrobat (with no PDF file open) and choosing Help > Check for Updates. You'll need to apply the updates incrementally. You'll find that you're asked to restart after each update, however, you don't really need to restart until the last update (9.5.1) is complete. You can see a full list of the updates for Acrobat 9 here: http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
After you've patched up Acrobat to 9.5.1, I would suggest running a repair of Acrobat (Help > Repair Acrobat Installation) just to make sure everything is in its proper place.
-David -
Pixma MP500 no longer prints duplex
My venerable Canon Pixma 500 has stopped printing duplex since Snow Leopard, the print driver tells me it is 10.30.3.0 which way more advanced than the drivers on the Canon site which were posted in 2009, and I cannot figure out how to tell either what the latest drivers are or where to get them. There are some sites that want to scan my machine and tell me what drivers I have - which is not going to happen as I can easily tell what they are, but other than these questionable offers, I cannot figure out how to tell if it is a printer problem, a driver problem, a Snow Leopard problem or what! The thing works fine other than this and the scanner works without problems as well. I need to have the duplex feature working so perhaps it is new printer time.
Any ideas?
Thanks - LawrenceThe Canon v10.30.3.0 driver suite provided by Canon to Apple and which is the default version for the [Canon Driver Update v2.3|http://support.apple.com/downloads/CanonPrinter_Drivers_for_Mac_OS_X_v106] provided via Apple's Software Update, has a menu called Duplex Printing & Margin for performing two-sided printing. If you select to print with the print dialog expanded (you may have to click the triangle next to the printer name to see the expanded dialog) you should have several menus provided by this v10.30 driver, such as Quality & Media, Color Options, Borderless Printing and Duplex Printing & Margin. Within the Duplex Printing & Margin menu you have the setting 'Automatic Duplex Printing'. Enable this and you should now be able to print two sided.
-
Yesterday, my Pixma MP500 suddenly stopped printing in color. Black and white prints fine but trying to print in color results in a blank page. I've checked all my settings and everything looks correct. A nozzle check shows a black grid but no color. I cleaned and deep cleaned the nozzles repeatedly. I took the print head out and cleaned it by soaking it for 8 hours. Absolutely nothing works. I still can't print in color. Any ideas or do I need a new printer?
Hello. If this issue persists after cleanings or deep cleanings have been done with the printer maintenance menu, the unit may require service. Please contact our support group using the "Contact Us" link below for additional assistance with this matter.
This didn't answer your question or issue? Find more help at Contact Us. -
Using Mac Pro running Snow Leopard (10.6.8) & editing & printing from Photoshop CS 6.
Have new Canon Pixma Pro-100 printer and set it up yesterday. First thing printed was a
document from MS Word (a letter) 8.5 X 11 plain paper - this came out OK. Next I fire up
Photoshop and open a 4 X 6 inch image to do a test print. I set it up in the print dialog as
4X6 paper, Canon's Pro Glossy paper profile, rear tray, standard print quality, Photoshop
manages the color. I load the paper in the rear tray close the covers and hit print. Now, when
it starts to print the printer moves about 3.8 inches of paper out of the printer and starts printing
on the remaining 2.2 inches then spits the paper out. It does this in Photoshop (any image it doesn't
matter), and it does it printing from Capture NX. I have been able to get it to print on the paper
correctly using Apple's Preview program but that that's not going to do me any good. I was on
the phone with Canon tech support for about 2 hours and they were completely puzzled suggesting
I would have to use Canon's printing apps instead to print - that doesn't do me any good either.
I want to be able to print from Photoshop. Any one every heard of this or experienced the same
problem? Thanks JamesD!Hello again. I recognize that a print is good if you like it and bad if you don't, despite what others might say, but I will at least share my experiences. They might help you or others who are following this thread.
My monitor is calibrated with Spyder 3. Gamma 2.2, 6500K, 83 cd/m^2. Contrast at 50%; brightness about 52%. My monitor lets me choose blackness level - it defaults to 50%.
When I print the test image I linked to above, using Lightroom, with no adjustments, my technical output is as follows:
Middle step wedge shows twelve disticnt steps. Whitest step is color of unprinted paper.
It varies from paper to paper, but I can discerne at least the 252 step and on some papers 253 - telling me I have good highlight detail.
On the black side I discerne 8 or 10, nothing lower. (That sounds like what you are reporting).
Artistically I am very happy how my print looks - nice red strawberries, good flesh tones, etc.
One my monitor, the on-screen image is almost identical to the print. I am surprised that you can see the 2 wedge step on screen at a very similar brightness.
I also checked out this B&W test image:
http://www.northlight-images.co.uk/article_pages/bw_printing/bw-test-image-2.html
You are probably aware of this since you are printing with Print Studio Pro, but others may not be.
You can print a series of test images:
find the one that best suits your taste, enter the calibration values in PSP, and save them as a custom setting. Then, each time you want to print recall the setting.
You can do a similar thing in Lightroom using the printer driver and User Templates.
There would be some one-time trial and error to that approach.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472 -
Just installed the latest Canon printer software update (V 3.2) suggested by the App store in effort to get printer working after OS update. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Attempting to print via Airport from a MacBook Pro. Also from a Mac Pro via ethernet. Both worked before updating to Yosemite. Canon Pro 9000 Mk 2 works via USB. Tried installing driver 10.84 from OS 10.9 as suggested by PAHU; no luck.
The "stopped at server - no pages found" message would suggest an image with the print file that is created by the printer driver on the MacBook Pro. But if the Mac Pro is getting the same message then that is unusual.
To rule out a couple of causes I would try connecting the MacBook Pro directly to the MX850 by USB cable. This action should result in a new printer for the USB connection being created automatically. If not then you may need to manually create it as you won't be able to use the existing printer that exists for the network connection. With the new printer created see if this will let you print without error.
If this USB connected printer also fails with the same message then try a reset of the printing system. Note that this action will also remove the Pro 9000 from Printers & Scanners so you will have to add it and the MX850 again. -
Canon Pixma Pro-100 prints very dark
I see that this is a recuring problem with the Canon Pixma Pro-100, but as nothing I have found online helps I'm asking and are hoping that someone can solve this problem for me.
Just picked up a Pixma Pro-100 today, and installed it on my 2011 iMac 27" (Yosemite) with downloaded drivers from Canon's website to be sure i have the latest ones. I also checked the printers firmware but that's the latest at 1.100. Wether I'm printing via Lightroom or Photoshop; or via Canon Print Studio Pro, My Image Garden, or via LR / PS directly; with- or without PS as color manager; the prints turns out to be much to dark.
I have to set an exposure of +2/3 in LR to be anywhere close to getting the same result as on the screen. I'm also careful to select the right ICC profiles for the correct paper. My monitor is calibrated with an Spyder4pro and I also re-calibrated it during this process to see if that helped.
Well. Long story short; the prints are to dark. So i borrowed my wife's 2013 MacBook Pro (Yosemite) Spyder4pro, and installed the latest drivers from Canon. Again; on this machine the prints are also to dark with about +2/3 to correct for the printer to do something that looks like the monitor. Both monitors are also set to about 30% brightness.
I also have access to an Epson Stylus Photo R3000 and the prints from this comes out much brighter.
Sadly I see that many others also have the same problem. So; here's the question. How do I fix this? Do i have to return the printer again and get a refund? Because this is clearly not good enough.
Solved!
Go to Solution.Hello again. I recognize that a print is good if you like it and bad if you don't, despite what others might say, but I will at least share my experiences. They might help you or others who are following this thread.
My monitor is calibrated with Spyder 3. Gamma 2.2, 6500K, 83 cd/m^2. Contrast at 50%; brightness about 52%. My monitor lets me choose blackness level - it defaults to 50%.
When I print the test image I linked to above, using Lightroom, with no adjustments, my technical output is as follows:
Middle step wedge shows twelve disticnt steps. Whitest step is color of unprinted paper.
It varies from paper to paper, but I can discerne at least the 252 step and on some papers 253 - telling me I have good highlight detail.
On the black side I discerne 8 or 10, nothing lower. (That sounds like what you are reporting).
Artistically I am very happy how my print looks - nice red strawberries, good flesh tones, etc.
One my monitor, the on-screen image is almost identical to the print. I am surprised that you can see the 2 wedge step on screen at a very similar brightness.
I also checked out this B&W test image:
http://www.northlight-images.co.uk/article_pages/bw_printing/bw-test-image-2.html
You are probably aware of this since you are printing with Print Studio Pro, but others may not be.
You can print a series of test images:
find the one that best suits your taste, enter the calibration values in PSP, and save them as a custom setting. Then, each time you want to print recall the setting.
You can do a similar thing in Lightroom using the printer driver and User Templates.
There would be some one-time trial and error to that approach.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472
Maybe you are looking for
-
Purchasing transitions (and/or creating ones in Motion)
I'm going to be doing a lot of work for a pretty straight-forward interview type TV show that is looking to spice up its transitions and are open to the idea of purchasing some to go beyond what FCP includes. I was looking at the ones from Eiperle an
-
Hi, Does anyone know how to suppress the SSO and reports authentication when we run reports from either Oracle Forms or URL - by using the standalone/custom report server? Whenever we call reports from Forms or URL, the login page comes up. Thanks. A
-
I am traveling in Chile, South America. I purchased an Entel sym card and I can make and receive phone calls, but the internet only works on WiFi. Do I need to region unlock or what? I willl only be here for A month and a half so I don't want to buy
-
Adobe Air on Windows Mobile 5.0
Hello, Are Air Apps supported in Windows Mobile, Palm OS and Symbian ? If yes what needs to be done to install them on these platforms ? Is Flashlite sufficient ? Also, is there a automatic online/offline synchronization mechanism between server and
-
Replace all ', , ' inside string
i have long string and with pl/sql i want to replace all ', ,' with ', null,'. I can use replace function like: prepare_insert := replace(prepare_insert,', ,',', null,'); but it will only replace first ', ,' not all. How can i replace all?