PJRM - Job Levels are not Mapped to  Jobs in PJRM

Dear Experts,
We are Implementing Oracle Project Resource Management and We have created Job Levels in Project Costing and the same we assigned at Job creation time in HRMS, When we are running the Program called "PRC:Maintain Project Resources" in output we are getting below message.
Message: The Following People have been copied from the Oracle HRMS Tables and created as Resources in Project Resource Management. However, these resources are not available for resource searches because their jobs are not mapped to a job in Project Resource Management with an assigned job level.
Any one could suggest me why this message we are getting even Job Levels are assigned at Job in HRMS
Please help me on this
Thanks in Advance..

Dear Experts,
We are Implementing Oracle Project Resource Management and We have created Job Levels in Project Costing and the same we assigned at Job creation time in HRMS, When we are running the Program called "PRC:Maintain Project Resources" in output we are getting below message.
Message: The Following People have been copied from the Oracle HRMS Tables and created as Resources in Project Resource Management. However, these resources are not available for resource searches because their jobs are not mapped to a job in Project Resource Management with an assigned job level.
Any one could suggest me why this message we are getting even Job Levels are assigned at Job in HRMS
Please help me on this
Thanks in Advance..

Similar Messages

  • E-Rec@ Job Postings are not reaching to Job Search !!!

    Dear All,
    We are facing an issue in Job Postings:
    1.Published  Job Posting (from 01.09.2011 to 27.09.2011) is not reaching to Job seasrch (under E-rec self services role >Employement Oppourtunites>Job Search.
    2. If we EXTEND the period of Job posting (from 27.09.2011 to 31.10.2011) shld show under internal job search (under E-rec self services -->Job search). But here extended Job posting also not reaching to the Job search.
    Can any one share the valuable opinion on this issue.
    Thanks,
    Asha....

    Hello Asha,
    Please have a look at wiki page:
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/SES%28SearchEngine+Service%29
    There you will find documents about several search problem topics discussed which may help you get the solution. Usually it is always good to check Report RCF_CHECK_SEARCH_SETTINGS and Report COM_SE_SEARCH_IIF_TEST and additionally the other links matching your issue.
    Regards
    Nicole

  • E-REC-Job Postings are not reaching to internal career channels

    Hi All,
    Recruiter Published job postings are not reaching to internal career sites.
    Can any one share their experiences on this pls.
    We already executed the HCM_ER_Jobpostings as well...but still...!!!
    Thanks,
    Asha...
    Edited by: Sikindar on Jan 24, 2012 9:53 PM

    Hi Asha
    Re-check the period for which Job Posting is open. The posting may not be valid for the current date.
    Also you could test and see if the same is reflecting in another channel (external). Let us know!
    Also check link: http://wiki.sdn.sap.com/wiki/display/ERPHCM/Aparticularobjectisnotshownintheresulthitlist
    It might help!

  • Rules are not allowed for jobs with set 'archive edited messages only' flag.

    Hi,
    We are on AEX 7.4 and have enabled user defined search and also setup archiving. Even though the retention period has expired but still the messages are not being
    archived.
    We see following issues:
    1. Unable to setup archiving rule in Runtime Work Bench, we are getting following error:
    Rules are not allowed for jobs with set 'archive edited messages only flag.
    2. Unable to set the expiration of messages using the following link.Each time we specify the number days it shows the same number of
    messages expired.
    http://XXXXX:50000/MessagingSystem/job/reorgdb.jsp
    3. However if we click on "remove messages" button the messages are getting deleted which tells me that the messages are not matching any
    archiving rule hence are being removed.
    Any pointers to the above issue are appreciated!!!
    Thanks,
    Rajeev

    Hi,
    Please check the [link|http://www.****************/Tutorials/XI/Archiving/Index.htm]
    Also check this
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50?quicklink=index&overridelayout=true
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=147266890
    Regards,
    Naveen.

  • All fields are not mapped in transformation 0IC_C03 to 2LIS_03_BF_TR

    I have replicated BI7 data sources of 2lis_03_BF,BX & UM from ECC. All the infosources are BI7 infosources.After installing the BI Content for 0IC_C03, infosource 2LIS_03_BF_TR is not active.When I am trying to activate the transformation it is showing a error in START ROUTINE & also all fields are not mapped.
    Please suggest a solution.
    Thanx in advance.
    Edited by: Aritra on Nov 28, 2011 11:37 AM

    Hi,
    i think you have done some modification manually(either added something and deleted something in transformation) thats why code isn't maching with standard sorce package.
    so to resolve this error just remove  changes you manually did. or remove that code and again create start routine and paste the code which u need.
    Thanks & Regards,
    NIKHIL

  • Dates are not mapped as the Date data type in Universe created on Infoset

    Hi,
    When i try to create the universe on top of Infoset query, the date fields present as the variables in SAP BI Query are not mapped as date data type in Universe, instead they are considered as Characters, hence the prompts related to those variables are coming s List of values instead of Calendar in WebI.
    Can any one pls help me to find the solution on how to map date variables as calendar in Webi Prompts.(For SAP BI Queries created on Infoset)
    Edited by: Nisha Makhija on Jul 20, 2009 5:59 PM

    Hi Ingo,
    Thanks for your response!!
    The I Query is built on Top of BW MultiProvider and the InfoObject is of Type DATS.
    Actually our Modeling on the BI is as follows :
    DSOs> Infoset>Multiprovider->BI query>Universe.
    Since we were not able to get the prompts as Calander so We tried Debugging on different Data targets to find the root cause. Please find our observations as follows:
    When I tested the same date infoobject(of Type DATS) by creating a BI Query on top of DSO, Infocube & Multiprovider ,the Prompts are working fine as a calander in WEBI Report.
    But when the BI Query is built on Infoset data target, In WEBI Report I am getting list of values rather a Calender prompt .
    I tested in the Universe that field is appearing as Character instead of Date.
    Please guide to resolve this issue.
    Thanks,
    Nisha.

  • BI content -- Transfer rules are not mapping automatically

    Have  any one come across with this issue.
    We have connected R/3 system  to multiple BI systems.
    Eg:  we have 1 ECC6 & 2 BI systems.
    Business Scenario is .
    I have two different Companyu2019s  A & B in two different Network Domains ( Domain 1 & Domain2 ).
    u201C A u201C Have Ecc6 & BI  in the Network Domain1
    u201C B u201C Have ECC6 & BI in the Network Domain2.
    With in the Individual Domain ECC6 & BI is working Fine.
      Issue : -
    When I connected Company u201C A u201C Ecc6 ( Domain1 ) to Company u201C B u201C BI system ( Domain2 ).
    The connection is showing OK.
    Replication is also OK,
    But  BI content installation have issue, Transfer rules are not mapping automatically with Standard Data sources ( Eg: 0HR_PA_0 ).
    Thanks in Advanceu2026
    @Shaik...
    Pls this is critical issue ... Basis people is saying this is not the issue of Basis..Connection is OK ...SO . it is the issue of BI only.
    any one Advice me ....
    Edited by: shaik on Aug 24, 2008 5:39 PM

    Hi Raghavendra,
    Thanks for Replay,
    Can you explain me how to check the  data mart Connection  ?
    what i am doing is ....
    step 1: Connection is OK.
    step 2 : Replication is OK.
    step 3 : I am going to Install BC Infosource ( Eg: 0HR_PA_1 )
    Grouping -
    In data flow before.
    source system -
    i check the Ecc6 system which is in different domain.
    then i drag the infosource ..... the transfer rules are not mapping ( Not coming )
    pls Advice....
    @ SHAIK...
    Edited by: shaik on Aug 27, 2008 12:41 PM

  • Identify Jobs that are not running on their Scheduled date time

    I have 29 scheduled jobs that run at different intervals of time. Some run once a day. few others run on hourly basis while others run on Sundays.
    I was working on a query that would let me know if a particular job did not run on its scheduled date and time.
    SELECT * from all_scheduler_jobs WHERE state <>'DISABLED'; will give me a list of all jobs that I have to monitor and that are not in the disabled state. But how can I verify that the jobs are running at their scheduled date time?
    Any help please? I need to create a view of all such jobs and then plan to send an alert so that appropriate action can be taken and it is assured that all important jobs run as per schedule.
    Thanks.

    Hi,
    I can see 2 approaches.
    - for jobs that have run but ran very late you should query dba_scheduler_job_run_details and filter by the difference between req_start_date and actual_start_date
    - for jobs that should have run but shouldn't, query for DBA_SCHEDULER_JOBS jobs that are SCHEDULED where next_run_date is in the past
    Hope this helps,
    Ravi.

  • Some offerings are missing user input, some are not mapping to activites

    Seemingly out of the blue my system has stopped mapping request offering answers to (manual) activities (mapping to the SR itself works), neither OotB properties or custom properties. This only happens when submitting them from the portal (ALL
    offerings)
    Also, some requests are even missing user input (and obviously no mapping is possible).
    This issue seem to affect all users. Even admins
    I have tried restarting the web content server and also the website on the sharepoint server. I have also tried creating a brand new template and offering in a brand new MP.
    I have been able to track down a ca. point in time this issue arose, but not found anything in logs anywhere (except SMPortalTrace). Checked web content server event log and website log, SQL log, event log on both management servers.
    I have checked the SMPortalTrace.log and for every request submitted I get an error (not visible in the portal) - some is in danish, so I have translated at the best of my ability:
    Failed to parse the description with links., System.ArgumentNullException: [ArgumentNull_Generic]
    Ressourcestrings for troubleshooting is not available. Keys and arguments often contains enough information to start the troubleshooting a problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.00&File=mscorlib.dll&Key=ArgumentNull_Generic
    ParameterName: input
    At System.Text.RegularExpressions.Regex.Matches (String input)
    At Microsoft.Enterprisemanagement.ServiceManager.Portal.RequestOfferingSilverlightModule.UriParser.ParseDescription(string description)
    The system is SCSM 2012 R2 UR2 (except the SP part of the portal)
    Update:
    I found that if the user input is missing even from the SR then the error does not present itself in the SMPortalTrace.log, only if the user input goes through (but is not mapped to activities).
    http://codebeaver.blogspot.dk/

    The issue seems to be related to a syntactically valid type projection in the Service Request form (customized) - I added a component to the existing projection. As the template that a request offering is based on has a reference to this projection I guess
    the code that creates the Service Request submitted from the portal somehow ignores the "unwanted" type projection component, and instead of not submitting the request it continues but is unable to map into child activities. I will try and reproduce
    this in more detail.
    Solution: Revert to original type projection in the SR form and everything went back to normal.
    http://codebeaver.blogspot.dk/

  • Tax Levels are not appearing in PO

    Dear All,
    I am using Taxinn and i am maintained Conditions in FV11 on Plant/Tax Code Level.
    While raising PO these values are not appearing.
    Regards
    amey

    Hi,
    Once you have maintained the tax condition record through FV11, you have to come out of the PO creation transaction and again try to create PO.  (Sometimes it is required). As mentioned above, it is necessary to check the date of the condition record should cover the date of creation of purchase order.  Also check the condition record you entered is not deleted by somebody.
    Also check the company code assignment to tax code as mentioned above reply.
    SPRO->Logistic General-> Tax on Goods movements -> India -> Basic Settings -> Maintain Excise duty -> Conditionbased excise determination -> Assign tax codes to company codes.
    Thanks,
    Harikrishnan.
    Edited by: Harikrishnan_sap on Aug 13, 2010 3:52 AM

  • Service Orders gets saved but text at item level are not saved for all item

    Hi All,
    We have configured service order scenario. The service order gets saved in GUI and in WebUI. But we are facing issue that not all the text entered at item level are getting saved.
    Example if we maintained text for 4 line items and save the SO.
    We open the saved SO, we get only 3 line items with proper text
    one of the line item text is not getting saved.
    The issue happens at both GUI and WebUI.
    Any pointers to fix this issue?
    Thanks and Regards,
    Gauri.

    Hi,
    You can try clearing the buffer using 'CRM_ORDER_INITIALISE' followed by CRM_ORDER_MAINTAIN" or TEXT_SAVE and TEXT_COMMIT, followed by BAPI_TRANSACTION_COMMIT with wait.
    Prerna

  • VLD-2754 - attributes of update matching criteria are not mapped

    For some reason, when we define a cube that uses a particular dimension, the mapping always fails with the error:
    "If an attribute is used in the matching criteria but is not mapped, then the matching condition cannot be determined. For the attributes (DIM_CT) to be used for matching, they must be mapped for TEST_CUBE. To deselect an attribute as a matching criteria, set Update Use For Matching to No."
    I can't seem find an option for Update Use For Matching. On my source table, I have some options for matching keys but I don't understand exactly how that pertains to the mapping target.

    Hi,
    You must be dealing with an update, upsert or insert update mapping here. Check the attribute properties of the fields on your target table. You should find the 'Update Use For Matching' property there.

  • Job queues are not executed as scheduled

    When I upgraded from 9i to 10g, I also migrated my procedures into packages. These procedures were created to be executed on a job queue. I noticed that since I've migrated them into packages, the job queue's stopped executing - it doesn't even look like it tried.
    I've pasted a sample of one record taken from 10/23/2008 8:39:00AM:
    LAST_DATE: 10/22/2008 8:15:03AM
    NEXT_DATE: 10/23/2008 8:15:00AM
    BROKEN: N
    WHAT: DZSP.JOBS_UTIL.UPLOAD_PLC_2MAXIMO;
    INTERVAL: TRUNC(SYSDATE+1)+8.25/24
    FAILURES: 0
    Your assistance is greatly appreciated!

    Thanks for your reply.
    Yes, I am using the DBMS_JOBS package. I was not aware that there was another scheduler - is there a difference or preference?
    The setting for JOB_QUEUE_PROCESSES is set to 10, DEFAULT=NO.
    Hope that helps.

  • Job Options are not available in the Print Dialog

    I have been working on a computer that, after applying the Acrobat 8.1.3 update and doing a repair install, cannot access the Job Options in the Mac Print Dialog after choosing the Adobe PDF 8 printer. Help!

    Hi There - I'm having very similar issues. I have created new PDF settings in Distiller and I can see them in all my CS3 apps but not Microsoft apps. Any ideas?
    Many thanks,
    Paul

  • Why Certified Freshers are not considered for Job Openings?

    Hi
    I am Mohan.
    I got certified in FI Module and updated my profile in all the job sites but I didn't got any call from any rectuiter.
    Why is the situation like this?

    Hi Mohan,
    Only few companies will recruting SAP Certified Freshers..But as a certified consultant get more calls rather than non certified freshers...In mumbai Reliance,Fujistu ,capgemini, recruiting certified freshers..
    Dont worry wait for time..one fine day u will get it good opportunity.
    Regards
    Kalpana

Maybe you are looking for