Pk files no longer being drawn

Hello,
First time poster here. I tried to read as many posts as possible about my issue, but unfortunately, I didn't see anything that might help me out.
I recently noticed last night that each time I would import a stereo wave file in AA3, it would take the normal time it takes when drawing the wave form for the first time. I usually do not delete pk files until I'm done with a project. Each time I bring the same wave file back in, it does the same thing like when you import something for the first time. I looked in my wave folder where these waves reside and normally, there are a bunch of pk files that of course can be safely deleted I know. But not this time. There isn't a single one there and it appears AA3 is no longer drawing them.
This has also brought on another issue and that is, applying more than 2 effects. I was mastering a stereo wave file at 24/48 (32 bit float, ASIO, Layla 24/96 soundcard on Win xp pro, 3 gig RAM dual core 3.2) and noticed on my 3rd application of an effect, there was no status bar showing the time it takes for the effect to be applied. The effect processed instantly, but the wave form never changed character. When going up to undo, that effect was not applied to it couldn't be undone. Yet, if I click on "repeat last command" or effect right under it, the effect I attempted to process does in fact load up. It just will not process by clicking "ok". It is working in preview mode. I exited out of the project, reloaded it and this was when I first noticed it was redrawing the wave like it does on a first import. Looked in the wave folder and no pk files.
I attempted just try the one effect that wasn't processing in the last session, and sure enough, it worked perfectly so it's not the effect itself. It seems I get 2 effect applications and AA3 will no longer process my effects to the wave destructively. This is all in edit mode by the way.
Does anyone have any ideas or suggestions for me? I have done a rescan of all my plugs and have disabled those that will not run in AA3. I think I've done as much as I can do on this end without the help of you guys. :) Any help or advice would be grately appreciated...thanks in advance. :)
Danny

Thanks for the quick reply guys. simple, I do have it set for that and have never had this problem before. This is where I think something may not be right somewhere. Anytime I bring a file into Audition, it cache's the wave form and never draws it again unless I make a change in another program upon exporting out of Audition. For example, sometimes I master using a few tools in Audition and then save the file and do all my conversion and dithering using Wave Lab 6. I save the WL6 file with a new name. If I bring that file into Audition, it will of course cache another wave form. But anytime (and honest, I've been using Audition and CEP for many years) I have ever brought a file in, it auto draws and leaves that draw everytime I load up that file with no additional caching. Now days, it will draw the wave form everytime that wave is opened no matter what bit or sample it is. Do you understand what I mean? I very well could not be explaining this right and if I'm not please forgive me.
I'll try once more in case I'm just confusing the heck out of you guys. LOL! Please bear with me and thanks for your patience. :)
I open the program, import a wave, it scans it and the wave appears. This is the only time it should do this to this particular wave file....at least in my experience. If I close all, shut down AA3 and reopen it and bring that exact same wave back in, it should not be scanning and redrawing the wave file if the file has not been altered in another program, correct?
This is the way it has always worked for me. Open once, it draws and each time I open that same file, it should never scan again. It is scanning every time on the same file and there are no pk files anywhere. I always get pk files when I import a 24 or a 32 on my end because I constantly remove them after I'm done with a project. I always have a 24 and a 16 after I'm done converting sample and bit rates. So there are always 2 pk files for every tune I master. Now days, my folder is completely empty...and I am still having that effect processing error to where 0 processing takes place after about 3 effects are processed. I do them one at a time, not all at the same time.
I get no status bar showing the effect being processed nor does the wave form change in appearance after the effect is applied. This started happening when I noticed a constant redraw everytime a file is opened so I thought it may have something to do with my problem. Hope I'm explaining it a bit better. Thanks for your time and patience. :)
Danny

Similar Messages

Drive no longer being used by time machine: delete some files?

Tried unlocking and allowing myself to read and write. Nope. Tried holding down the option key. Nope.
This drive is no longer being used by time machine and I want to delete some files on it.
Is there a way to do it without wiping the entire drive?

nowsthetime wrote:
It wasnt a dedicated backup and there's other material on it that I need to keep.
That's a problem (as you've discovered). Time Machine works best if it has it's own, exclusive partition. See Time Machine - Frequently Asked Question #3 for details.
Aha! Just found THIS. I'll post if it works. http://www.celiamania.com/wordpress/?p=1038
That will let you delete individual backups, or all backups of selected items.
If you don't have room to copy the "other" stuff elsewhere while you erase the disk, you can delete the Backups.backupdb folder. Emptying the trash will take a very long time, and may give you permissions and/or locked file problems. If so, see #E6 in Time Machine - Troubleshooting.

Motion Graphics (Animated Graphic) Like a Circle Being Drawn – Addable in PS Video Workflow?

Hi, i create video tutorials in Photoshop CC*, only of screencasts. Sometimes i insert a red circle around important parts of the screen.
I would like to show the circle being drawn bit by bit – not the whole circle slowly fading in, but being drawn around the subject over time. Also interesting might be arrows that build up and bounce a bit. (This NOT like a button being pushed.)
I didn't find online good info how to create an addable circle being drawn or sth like that. I found verbose tutorials about movie title animation in Photoshop, but they don't help to create a circle being drawn.
A circle being drawn around a point of interest - this is easily possible for instance with Camtasia – but i would love to add the animation within Photoshop. It should be possible if the animation is a smart object within a TIFF or PSD file, but i don't know how to create animated files like that.
Are there animated files like that available somewhere? Best would be vector files that could be changed (for instance contour width, contour colour, speed etc.).
Or how could i create them myself with Photoshop? (I have no experience with Premiere or Illustrator.)
Thanks!
*aware that there are other solutions to all of my procedures, which are better for you

Henrik Nerr wrote:
Actually i know of that repeating thing after free transform, but didn't think it up here. I wonder, if you do that with a vector object and the result was turned into one smart object, you could then transform it into an ellipse?
There's no reason why not, but you'd have to animate as a perfect circle, an then distort into a flatter ellipse at the end, which sounds kind of klunky. But as is the way of these things, you have given me another idea. I've never done this, but I can't think of any reason why the layers that make up the animation shouldn't have layer masks. I bet the penny just dropped and you can see where I am going? :-)
It would need some manual input, but you start with your ellipse, and copy it whole as many times as you need frames. The layers will have incrementing names, which we will take advantage of later. Group those layers to keep them tidy.
Now use Transform Again (or Step & Repeat) on a black segment the radius of which will be big enough to completely cover the long side of the ellipse. The resulting layers will also have incrementing names, and they should match the ellipse layer names. Group these to keep them tidy.
So you'll start with this (Note I am using only four frames to keep this demo simple)
After Step and repeat you'll have
Turn off the Mask Group, select layer 'Ellipse 1', Ctrl click one of the mask layers (which I have ballsed up by forgetting to rename), and add a layer mask to Ellipse 1. You'll see where we are going now.
Select the mask layer you just used, and the mask layer next to it, and merge them. Repeat the last step, and continue for all Ellipse layers. You'll end up with something like this (but with heaps more layers)
Note that you end up with just the one Mask layer, because you have been merging them as you go. To produce the animation start with all Ellipse layers off, and as you progress to the next frame, turn on the next Ellipse layer. Unlike with normal animations, we keep all preceding layers switched on because we are building, and not moving.
OK, here's the clever bit. Unlink all the Ellipse layer, layer masks (click on the chain icons.) Make sure the layer content, and not the layer masks are active (double white line around the thumbnail). Select All the Ellipse layers, and Free Transform to fit the next item to be highlighted. If I recall correctly, using FT on multiple layers is a fairly recent thing. Can anyone comment on that? If you are thinking ahead, make sure the Mask layers are big enough to cover the largest item you might need to highlight. These layers are always tuned off for the final animation, so they can be as big as you like.
I'd be inclined to keep master copies of both Ellipse and Mask groups, and work off a new copy for each highlight.
Personally, I'd just use After Effects, but if you can't get use of it, it is at least possible with Photoshop.

My Audible Enhaunced files no longer sync to my IPad2 since IOS 5

Anyone else have this issue: My Audible Enhaunced files no longer sync to my IPad2 since IOS 5
At first i could not get any new Audiobooks to sync but when I separated one of the MP3 Audiobook version files from the enhaunced Audible ones it synced the MP3 audio book fine
I am running Itunes 10.5 on Mac OS Lion 10.7.2 and my Ipad2 has IOS 5
I am syncing via itunes on my iMac via a cable as usual
I can play my Audible files in Itunes, so my Audible Account is authorized.
I did not notice this at first as i was listening to a series and the current book i just finished was MP3 but the next was Audible ( the reason for this because of region issues aome books are not available in Australia as Audible but Amazon sells the MP3 version sometimes. so whilst most of my Audiobooks are Audible some are MP3 or CD depending on what I could get.
when i tried to sync it took a long time but no installing tracks was being listed.
to cut a long story short i wiped the Ipad2 and started to reinstall first the Apps then the music and movies and latly the Audiobooks . . .
When i reach the Audio books the problems started again so i tried an MP3 audio book on its own tried to add a Audible file and the sync went into limbo again.
Apples IOS has obviously broken the ability to sync Audible books I had no issues before this and i know the files are ok i listen to a few to check.
It obviously has something to do with Audibles enhaunced format / Audible authorization which worked fine until IOS 5

Update to the Audible sync issue:
I have been in contact with Audible and reported to Apple on this issue
So far many email replies from Audible . . . zero from Apple . . .
Below is Audibles reply
Dear Kelvin,
Thank you for all your information regarding the iPad since the Mac iOS update.
There are many iPad specific issues that have been caused by the iOS5 update. At this time, we are awaiting for Apple to resolve these issues. Apple has told us this issue will be resolved by the next update, although, this release date is still unknown. In the meantime, you will need to transfer your titles via the Audible application. I do apologize for this inconvenience.
I thank you for your patience during this time of inconvenience!
Sincerely,
Monica V.
Audible Customer Support
So in short if you have installed IOS5 and wish to transfer your Audible files to a device ( i assume this issue is not iPad 2 specific) you will have to wait on Apple to fix this issue which according to some developer post they were aware of during beta. Eg you cant sync Audible books to you device via iTunes.
You will have to re-download/download any books you want to listen direct too the Audible App. on your device until Apple gets around to fixing this issue.
If you have to updated and want to sync to your computer i suggest you DON'T INSTALL IOS5 UNTIL APPLE UPDATES IT
Hope this helps
I know it's not a fix only Apple can do that . . . and it's an Audible issue which is not there product . . . . they just have a relationship with Audible. . .
Apple probably hopes people will buy their overpriced Audio books . . .
I have never under stood why anyone would when you can save at least 1/2 the cost and have a bigger selection available to you on Audible
Nuff Said
PS i know i spelt enhanced wrong on my first post but i don't think Apple allows editing of posts
-- Kelvin
MacBytes
http://www.reddit.com/user/MacBytes/
https://twitter.com/#!/CaptainSkurvy
https://plus.google.com/u/0/107817606533013579228

.XMP files no longer appear as sidecars--how to clear metadata?

Photoshop CS2 ver 9.0.2
Bridge ver 1.0.4.6
ACR ver 3.7
eMac G4 800 MHz
Mac OS X ver 10.4.9
1 Meg RAM
12 GB available disk space
Bridge and Photoshop are set to save metadata in .XMP sidecar files, but sidecar files no longer appear. That is, up till a few days ago, .XMP files appeared when I opened raw files, but no longer. The drop-down menu is still set to save metadata in sidecar files.
Cannot clear metadata in Bridge. I can select "Camera Raw Defaults" in ACR, but that doesn't clear cropping.
1) How do I return already-stored metadata to .XMP files?
2) How do I get PSCS2 to store future metadata as .XMP files?
3) How do I clear metadata currently stored in ACR/PS database?
4) What did I do to cause system to store metadata in ACR/PS database despite being set to save in sidecar files?
Thanks.
--HC

Noel,
Excellent point. I have no idea. Maybe this was only working for
.PSDs/etc. (which contain the metadata embedded in the file itself[,
right?]). I may have been deluding myself this whole time. It's
possible that it never really worked the way I thought it did to begin with.
But, more specifically, here's the current question: If I have this
file (which is a backup from long ago):
J:\backup of M90\Documents and Settings\philipt\Application
Data\Adobe\CameraRaw\Database
...assuming that drives are currently mapped (by drive letter) the same
way they were when that backup was made), can I just replace the current
file:
C\Documents and Settings\philipt\Application Data\Adobe\CameraRaw\Database
...with the one from J: and expect it to work correctly?
What's the worst that can happen if I do this?
BTW, the file on J: is 2,569 Kb; the (new) one on C: is 2,754 Kb. This
doesn't seem to bode well, since the old one (J:) should have much, much
more data in it (assuming that the "Database" file per se is where the
metadata is stored): the older file has complex,
multi-tiered data for 10s of 1000s of images. "??"
Thanks again for your willingness to help with this!!
Aloha,
-pt

SCANNER NO LONGER BEING RECOGNIZED

I have a G4 with OS X 4.5 and my hp scanjet 3970 was working fine until I applied the last OS update now it is no longer being recognized by my computer, I've tried updating the drivers but was still unsuccessful in getting it operable...I've repair the permissions from my DVD but still was not successfull.
Does anyone have any solutions or suggestions (other than getting a different brand scanner. lol!!!)
THANKS IN ADVANCE

I have a G4 with OS X 4.5 and my hp scanjet 3970 was
working fine until I applied the last OS update now
it is no longer being recognized by my computer, I've
tried updating the drivers but was still unsuccessful
in getting it operable...I've repair the permissions
from my DVD but still was not successfull.
Does anyone have any solutions or suggestions (other
than getting a different brand scanner. lol!!!)
THANKS IN ADVANCE
Okay everyone I was able to resolve the issue with my scanner.
After posting here I recalled how my wireless mouse was acting up and the step I took to resolve that issue, so after uninstalling the hp software I went to the Library/Preference folder and removed all the hp scanjet plist and all the other related scanjet files.
I emptied the trash can and restarted my computer and then reinstalled the updated driver and "walaa" I was once again able to create magic.
Well thanks to everyone.
Powr Mac G4 Mac OS X (10.4.5)

My JPEGS are no longer being copied over to Finder. Only a random fraction are copied. It use to work perfect. Is there a bug in the updated versions of iPhoto?

My JPEGS are no longer being copied over to Finder. Only a random fraction are copied. It use to work perfect. I can move them 4 or 5 at a time, but it is very time consuming. Is there a bug in the updated versions of iPhoto?

OK - here is what I've done in the past. As I want to be able to save my photos on a DVD that can be read by both a PC and a Mac, I am burning them in Finder. I start by downloading into IPhoto. I'll flag and edit the ones I want to print or post to the web. After that I want to take all the keepers and move them from IPhoto to various files I create in the document section of Finder. I've done it both ways in the past, copy and paste or just drag over, all the files would transfer over. Now there may be dozens of pictures that do not move over - very random, in one case there were only 6 photos and the 3 vertical ones did not copy over.
I'm wondering if this is a software issue or if there is just too much data being moved around. FYI there are 2 Nikon cameras I use and the files from both do this.
Thanks

My files no longer sort properly - files beginning with AEIOU come before

My files no longer sort properly - files beginning with AEIOU come first after numbers and special characters, then letters H, K, M-N, P, W, B-D and so on. I click on the column header again and it reverses the sort, but still messed up. This convoluted sort appears in all views. All the letters are grouped together, so all the "a"s, "e"s, etc are being sorted by some algorithm, but it's not alphabetical. I noticed it after installation of Snow Leopard, but it could have been that way before. I did a wipe and load and just imported user settings from Time Machine afterwards. Any suggestions on how I can fix this?

Usually, it is (1) a preference file located here
<user home folder>/Library/Preferences/
In this case, the problem is not just Finder if it also happens in Mail. Unfortunately, there are a lot of preference files.
Or it is (2) a background process that runs when you log in to your account. If it is something that starts automatically, it may be one of your Login Items. You can look at System Preferences Accounts pane +Login Items+ tab. That list shows processes that run when you log in to that account. If you see anything that you no longer need, you should remove it. Look for anything there that might, for whatever reason, change the alphabetical sort order.
Make sure English is selected as language in System Preferences +Language & Text+ pane. It seem improbable that it would not be, but I just noticed there is a setting at the bottom of that pane that says +Order of sorted lists+. Does that have something other than English ?

Library Backups No Longer Being Created in 10.1.2

No matter what I do, Library Backups are no longer being created in 10.1.2. This is happening on all 6 of my production Mac Pros and iMacs. I can change the location of the Library Backup folder, but nothing is ever created in the new location. It's as if FCPX no longer knows how to backup libraries.
Some background...
We are working with Libraries and Media files on our XSAN Volume.
OSX 10.9.3
FCPX 10.1.2
We did not notice the Backups were not being performed until one of our Libraries had an issue and we could not find a single Backup of the library.
What I have tried...
Move Libraries to Local System Volume - Still No Backups.
Change Library Backup Location - Still No Backups.
Toggle Library Backup Location to No Backups and then Back to Backups - Still No Backups.
Ensure Proper Permissions on Library Backup Folder - Still No Backups.
Trash FCPX Preferences - Still No Backups.
ReInstall FCPX - Still No Backups.
I am at a loss at what to do next. I can't even see the backup process happening in console, or any errors that might give me a clue as to why it's not working. Short of trying to reinstall Mac OS on one of my production macs, I see no other alternative. Considering I'm having this issue across our entire production system, I'm wondering if this is a very serious FCPX 10.1.2 bug.
Is anyone else having these issues????

Tom Wolsky wrote:
Definitely not working as advertised. I made a new library. Imported some stuff. Futzed around. No backup. Waited more than an hour. Made a new project and always immediately a backup appeared.
I've had pretty much the same results trying to sort out what is going on since the 10.1.2 update regards Library Backups.
I'm getting no backups with newly created Libraries like others, tried all sorts of juggling acts in the new settings arrangement trying to find a way in.
What I have so far discovered is that Libraries are not created until a Duplicate Project is created of the original Project for the Library, then it appears to do as expected.
Seems like a bug.
Hope other users can confirm this.
Al

Status bar no longer being displayed in browser

I am running an Oracle Application Server 10g (Forms and Reports services). When a form is displayed, it use to have the "default menu" displayed (action, edit,query...) and the "status bar" below the form. The status bar is no longer being displayed. I don't remember changing the configuration files (formsweb.cfg...) in anyway that would cause this.
Does anyone have an idea?

Tiago,
Are you refering to the browser status bar?
I'm referring to the oracle forms status bar which would display a frm-xxxxx error message should it occur. It was being displayed with all my forms, and now it is not.
Thanks.

Word File Takes Longer and Longer to Save

I’ve been working daily on the same 100-page document for several months. I had no problems with the document under Word 2003. However, under Word 2010 the file grows in size over time, and saving the file takes longer and longer to the point where there
are significant timeouts (Word is “not responding”) whenever an automatic save occurs.
I don't want to diable automatic saves because Word does crash for me on rare occasions, generally if I do something "too fast".
I’ve found a workaround for the problem, and every three weeks or so after the automatic saves have become painfully long I copy the document to the clipboard (except for the last paragraph mark) and then I open a new document based on the relevant template
and I paste the clipboard contents into the new document. I rename the old version of the document and the new version becomes the working version. This reduces the file size (currently around 1.4 MB) by about 150 KB and the problem goes away for another three
weeks.
Certain aspects of my situation are unusual, and these may or may not be relevant to the problem:
At the end of each day I use (via a macro) the Review, Compare feature of Word to compare the document with the previous day’s version to allow me to reread any changes I made to it.
I use various other macros for intelligent page-turning, resizing windows, smart Find, etc.
I maintain the document as a DOC file (Word 97-2003 Compatibility Mode) because I need to share the document with an organization that requires this format.
The document flips back and forth a few times between being a one-column and two-column document.
The document has a table of contents on the last page.
The headings in the document have embedded section and subsection numbers.
The document has numerous embedded SEQ and cross-reference fields.
The document has embedded EMF pictures that were generated by a non-Microsoft application.
The long times to save the file and the temporary solution I’ve found to the problem suggest that some "junk" is accumulating “in” the last paragraph mark. This junk doesn't cause any operational errors, but it slows things down to the point where
the auto-save times out and I temporarily get the distracting "not responding" message. It would be nice if Word could automatically eliminate the junk in the last paragraph mark so that I wouldn’t have to do it manually.
Do you have any suggestions for how I might eliminate the problem?
I'd be pleased to send a copy of the slow-saving file to a Microsoft Word programmer for diagnosis of the problem.
I have up-to-date Windows 7 professional (64 bit) and Word 2010 14.0.6129.5000 (32 bit).
Thanks for your help,
Don Macnaughton

I am experiencing exactly the same save issue, although I cannot use the suggestion of copying to a new document as I have allot of references within the same document and I'm scared that I'll loose them (or mess them up).
It is nearly a year later, did you have any luck?
Francois,
I'm still experiencing the problem. However, I've now converted the document from a DOC to a DOCX, but that made no difference. So every 18 or so days I copy all of the document into a new document except for the last paragraph mark
and the problem goes away for another 18 or so days. For my document this solution is fully reliable although it's less convenient because it's a little complicated and I worry I may make a mistake or some text may be lost in the transition.
So I'm still looking for a solution to the problem. Is there anything unique about your document or your handling of the document that might be the cause of the problem? Are you using macros, Compare Versions, switching back and forth between
one and two columns, or anything else that is common to the features that I list in my first post in this thread?
You might want to try my copying solution as a test while keeping your original document as the official version that you continue to work with. You could then check the test document very carefully to see if my solution works with your
document. You might find that you can trust my solution (or you might not).
By the way, I make sure that the copy worked properly by doing a Compare Versions of the old and new documents. (Surprisingly, sometimes the compare finds very minor differences between the two documents, but usually not.)
If the problem really bothers you, you can hire Microsoft Support, although that will cost you some money. If you do that, please let us know the outcome.
Don Macnaughton

Pdf files no longer contain page info

Saving copies of web pages (e.g., financial documents) in 2005 printed headers with URL, and the footers had the date and time. Sometime in 2005 this info was no longer being 'printed' as a part of the pdf. I would like to have this info as a part of the document, but none of the preferences (for Safari, Firefox or OS X 10.3.9) has anything to do with including the info in the pdf. Neither Safari 1.3.2 nor OS X 10.3.9 seems to have the ability to provide this data in the *Get Info*.
My question is How do I get this info as part of the pdf again-- without changing my OS? (With the iMac's limited RAM this is not a viable option for me.)

Hi,
Have you tried changing the Adobe Reader preferences
to not use Reader as the plugin for web browsers? The
option to enable/disable is in the Internet section
of the Reader preferences.
Thanks for your advice..I went into the Reader's preferences and unchecked the top box designating Reader to open pdf files. I went back and tried to download another pdf text and got this message: "attempted to load an Internet plug-in named “Adobe Acrobat and Reader Plug-in”, but the plug-in failed to load successfully."
Got any other thoughts?

After LION update web Cam is no longer being detected at all. Does anyone have a fix? Thank you

After LION update web Cam is no longer being detected at all. Does anyone have a fix? Thank you

Thank you, Rod!
While researching frame rate I came across this helpful blog posting: Crazy about Captivate: Lessons Learned: Video and Resolution in Adobe Captivate
This is the line that caught my attention: "I discovered, after several experiments, that if you publish a course in Captivate as SCALABLE with a video inserted, no matter what the resolution, it makes the video look pixelated."
When I unclick the "scalable HTML content" button before publishing, the video is fine!
Big sigh of relief! Now I just need to figure out why audio won't play on one of the slides (it has an accordian widget, if that's relevant) and why I can no longer use Effects (I get the message, "Effect file is not valid")

I have a new Mac computer that has imovie. I recently made a movie that i would like to burn to a DVD. I hear that idvd is no longer being sold. Is there software on the computer that i can use to burn a dvd or is there a recommended software to use?

I have a new Mac computer that has imovie. I recently made a movie that i would like to burn to a DVD. I hear that idvd is no longer being sold. Is there software on the computer that i can use to burn a dvd or is there a recommended software to use?

There is no really satisfactory substitute for iDVD to burn video files from iMovie.
Whilst Macs with a Superdrive continue to be able to burn video DVDs, the software for so doing, iDVD, is no longer included in the iLife bundle that comes with OS 10.7 Lion (which also omitted iWeb) or will come with OS 10.8 Mountain Lion. And it is no longer included in the iLife 11 from the online Apple Store: http://www.apple.com/ilife/. Your only solution is to look on Amazon or eBay and try to get an older version that includes iDVD 7, i.e. iLife version 9 onwards. You should also do this if you plan to buy a new Mac anytime soon, as stocks of iLife that include iDVD will not be available for ever.
However, the vastly more expensive FCPX can burn a DVD without iDVD or DVD Studio Pro involvement, but lack the themes etc of iDVD. Also, of course, there is Roxio Toast, which is the best software for burning anything but again does not offer the flexibility of iDVD.

TS1741 my iPhone and iPod are no longer being seen by iTunes on my computer. Everything is up to date.

my iPhone and iPod are no longer being seen by iTunes. All software is up to date. I have tried following the fixes suggested by the support on iTunes, to no avail. my computer said that my iPhone 5 is "older" and that usb2 is not compatible with usb3 on my computer. it worked until a week ago. can someone help?

See TS1538: iOS: Device not recognized in iTunes for Windows.
tt2

Pk files no longer being drawn

Similar Messages

Maybe you are looking for