PKBC TCode Enhancements not getting triggered ?

Dear All,
I've found the Enhancements for the PKBC Transaction.
MPKB0001      User's own functions in the Kanban proces
MPKB0002      Customer defined display in kanban board
MPKC0001      User exit for kanban calculation
MPKD0001      Kanban output as EDI
MPKP0001      Customer Defined Display in Kanban Board
I kept a break point in each of the above Enhancement but no where the break point is getting triggered when PKBC Transactions data is being saved.
I've created a CMOD Project which Includes all the EXIT Names corresponding to PKBC Transaction.
Any clues wht shud be done ?
Regards,
Deepu.K

Hi,
You will have to go in SPRO and tick the "ENHANCEMENT" option.
only then it will go to user-exits.
Please ask your Functional Consultanat to do it.
Let me know if you need the complete path for that.
Regards,
Rajat
Edited by: Rajat Chaturvedi on Nov 27, 2008 10:23 AM

Similar Messages

Enhancement spot - Function module not getting triggered in background

Hello Experts,
I have implemented an explicit enhancement spot. In the code implementation, I am calling a Function Module.
When I call that FM in background, things are not working as expected. But if I am calling that FM in normal mode, things are working fine.
I am passing parameter to FM by 'Value'.
Can anybody please let me know what I am doing wrong?
Regards,
Ashish

Hi,
Enhancement not getting triggered in BDC
Regarding on your query, You would go through below link.
Screen Enhancement of Transaction CO11N
I hope, it helps to you.
Regards,
Sekhar

IDOC - Function Exit not getting triggered

I am doing an inbound IDOC for the message type WMMBXY and using basic type WMMBID02.
This is for goods movement based on PO.
I am doing an enhancement in the includeof the function module exit EXIT_SAPLLMDE_002.
This exit is supposed to get triggered for the message type WMMBXY.
when i tested the idoc in we19 it is sucessfully getting posted. I want to check my code in EXIT_SAPLLMDE_002. I have set breakpoint and tested using we19. But this is not getting triggered. But the idoc is getting sucessfully posted but with a status message 56 An inbound partner profile could not be found( I am not sure if this has something to do with above problem).

Did you attach your exit to a CMOD project and activated the same(CMOD transaction)?
The error you see regarding the partner profiles is probably due to the non existance of a partner profile for your idoc type in we20 transaction.
Maintain the inbound partner profile in we20 transacttion.

Urgent IDOC - EXIT_SAPLLMDE_002 not getting triggered.

I am doing an inbound idoc on message type WMMXY goods movement.
The idoc is sucessfully getting posted when tested through we19.
But the user exit EXIT_SAPLLMDE_002 where i am doing an enhancement is not getting triggered when the idoc is posted.
I have activated the exit functional module, the project in CMOD is also activated.
Some one pls help me .. if u have its document pls post it to me.

Hi,
Please refer to this documentation of user-exit; may be of some help for you.
You can use this user exit to influence the processing of IDOCs of the
message type WMMBXY (goods movements) that are sent to SAP from external
systems via the MM-MOB or WM-LSR interfaces. You can also access
customer-specific processing in this case.
Call transaction and other important requirements
The user exit is performed in the function module that processes the
IDOCs of the message type WMMBXY, after the IDOC is withdrawn and
checked but before direct processing in the application has been
initiated. (That is, the data for the goods movement has already been
determined and edited, but the function module for updating this has not
yet been accessed. The standard function module for processing the
message type WMMBXY is called L_IDOC_INPUT_WMMBXY. The IDOC is processed
in an update task, which means that the source code is also executed in
the update.
If an error arises, then messages should not be issued since processing
is being carried out in the background and the result of processing must
always be returned to the ALE interface. For this reason language
elements such as MESSAGE, COMMIT WORK, LEAVE and the like should not be
used. If errors that should be passed on to the ALE interface or that
affect the result of processing are found in the user exit, you should
also use the user exit MWMIDI07(EXIT_SAPLLMDE_001) since it alone can be
used to take your errors into account (see documentation of the user
exit).
Parameters and options
The user exit in the program is the function module EXIT_SAPLLMDE_002.
In order to be able to use it, you must first create Include zxlidu10
and activate the enhancement by means of transaction CMOD. As
parameters, you can use the following data:
o   Goods movement data already determined from the received IDOC:
    -   Transaction code that is given along with the application
        function module (see interface description (import parameter
        X_TCODE).
    -   Indicator: post only if all items o.k. (import parameter X_XALLP
        ). This indicator must be set by default, to enable IDOC error
        processing.
    -   Indicator: Reset all tables (as primary call) (import parameter
        X_XALLR). This indicator is not set by default to enable the
        processing of several IDOCs. Normally you will not change these
        two indicators.
        -   Goods movement items table (table parameter T_IMSEG)
    o   Received IDOC data:
        -   IDOC control record (import parameter I_IDOC_CONTROL)
        -   IDOC data records (table parameter T_IDOC_DATA)
    This user exit can be used to:
    o   Influence the determined data for the goods movements. All data can
        be changed in this case.
    o   Analyze and process data that is transferred using customer-specific
        segments.
    o   Access additional activities.
    Examples
    A number of potential applications are described below.
A number of potential applications are described below.
o   You want to inform a user by mail when the goods movements of
     certain vendors or customers take place.
o   You want to start your own label printout, for example at goods
     receipt.
o   You want to update your own tables, for example statistical data.
o   You want to analyze a missing parts table at goods receipt and
     redirect the goods receipt correspondingly.
Reward points if helpful.
Regards,
Pankaj Sharma

User Exit not getting triggered

Dear all,
we are creating a workflow for PR Release which needed release strategy customization. so we are trying to set the release stratagy by changing the communciation structure CEBAN-USRC1 field.
for this, i had done the following things:
1. SMOD->M06B0005->components->EXIT_SAPLEBND_004->INCLUDE ZXM06U31 (double clicked) wrote few lines of code.
2. CMOD-> created a proj ZMM_PREL->assigned Enhancement M06B0005 under enhancements tab-> EXIT_SAPLEBND_004-> activated all
(User exit, project eveything).
Now my problem is when i create a PR, this user exit does not get triggered at all. I am working on ECC6.0 the same code which i did in Ecc5.0 for my previous client is still working fine.
Can anyone please guide me where i might have gone wrong?
Thank you,
Regards,
Lakshmi

Hi,
HAve u verifiyed that the user-exit u r using is triggered whenever u create ou PR.?
First of all u have to put breakpoints at each and every user-exits provided for that transaction, then check which user exit is getting triggered when u carete ur PR. and thenafter write ur code in this user-exit only.
Reward is useful.
Regards,
Harsha

/BDL/TASK_PROCESSOR not getting triggered in satellite system from Solman

Hi,
We have scheduled EWA report in Solution Manager for one of the satellite system.
Solution Manager has sudddenly stopped creating of job /BDL/TASK_PROCESSOR0000002218 (ie job which is created immediately as EWA is scheduled in Solution Manager)
/BDL/TASK_PROCESSOR is running correctly and on hourly basis in satellite.
The EWA report is getting generated in Solution Manager after long time and without job /BDL/TASK_PROCESSOR0000002218 (is sessin specific job) being triggered.
Kindly help.
Regards,
Trupti M

Hi Paul,
My problem is solved.
Actually the Task: EarlyWatch Alert for Solution Manager under 'To Do' view of sdccn of satellite system was somehow getting scheduled as Back dated(ie instead of 30.04.2020 it was getting scheduled at 28.04.2010)
Due to this when we would do 'Start now' for the Task 'EarlyWatch Alert for Solution Manage' it was not getting triggered.
So I manually did refresh session which was mentioned under steps for manully sending data to SolMan under solution_mamanger tcode.
Due to this job BDL/TASK_PROCESSOR0000002237 got created.After this job got completed Task ''EarlyWatch Alert for Solution Manager ' got automatically generated.
I back dated the date for Task ''EarlyWatch Alert for Solution Manager" and started it.
Due to this the job /BDL/TASK_PROCESSOR0000002238 got created in satellite system for sending data to SolMan (This was not happening earlier.)
Extract from Solution_Manager tcode when scheduling:
When the Session Refresh task has been processed, a new task with the appropriate session type and session number appears in the To do view. This task collects and sends the data for your session. If a new task does not appear, search in the task-specific log for errors that ocurred during the Session Refresh task and make any necessary corrections.
To start the task immediately, select it and right-click to call up the context menu.
Choose Start Now. When the task has been processed successfully, it appears in the Done view. The data has been sent to your SAP Solution Manager system. You can check this in the task-specific log.
Thanks for all your help. Hoping my post will also be helpful for others.
Regards,
Trupti M

User Exit not getting Triggered in Quality Server

Hi,
In FM 'IDOC_INPUT_DESADV' Iam using an User Exit 'EXIT_SAPLEINM_006' ,
which is getting triggered in Development server.But when I moved it to Quality,
The User Exit is not getting triggered.Thou the Exit is assigned to Enhancement
and that in turn is assigned to Project, still the problem persists.
Can any one suggest me what could be the problem.
Regards,
Kiran B.

Kiran,
Check the <b>Project</b> of that enhancement is active or not. not the enhancement.
<b><REMOVED BY MODERATOR></b>
Satish
Message was edited by:
Alvaro Tejada Galindo

Userexit not getting triggered for 0CFM_CLASS_MASTER_DATA_ATTR

Hi Experts,
I have made enhancements to 0CFM_CLASS_MASTER_DATA_ATTR & 0CFM_FI_TRA_ATTR in RSAP0001(EXIT_SAPLRSAP_001). I have set the flag to New Data entry logic(Switch for Datasource feed) to populate the Timedependent attributes in 0CFM_CLASS_MASTER_DATA_ATTR .
I kept the break point in the Userexit and ran RSA3 for the above 2 datasources but the user exit is not getting triggered.
Can you please help why the userexit is not getting triggered?
Thanks,
bwuswer14.

Hi,
Thanks for ur post.issue resolved.im keeping the breakpoint in 1st user exit.After keeping the breakpoint in EXIT_SAPLRSAP_002 it got triggered.Closing the thread.
Thanks,
bwuser14

IDOC - EXIT_SAPLLMDE_002 not getting triggered.

I am doing an inbound idoc on message type WMMXY goods movement.
The idoc is sucessfully getting posted when tested through we19.
But the user exit EXIT_SAPLLMDE_002 where i am doing an enhancement is not getting triggered when the idoc is posted.
I have activated the exit functional module, the project in CMOD is also activated.
Some one pls help me .. if u have its document pls post it to me.

I am doing an inbound idoc on message type WMMXY goods movement.
The idoc is sucessfully getting posted when tested through we19.
But the user exit EXIT_SAPLLMDE_002 where i am doing an enhancement is not getting triggered when the idoc is posted.
I have activated the exit functional module, the project in CMOD is also activated.
Some one pls help me .. if u have its document pls post it to me.

IDOC IDOC_OUTPUT_ORDERS not getting triggered

Im triggering an idoc IDOC_OUTPUT_ORDERS immediately when i create/change the PO
However the idoc is getting generated when i change only certain fields.
When i change other fields it does not get triggered.
Why?
-Dexter

Hi,
Check in the distribution model tcode BD64 if you have set some filter settings for the partner.
KR Jaideep,

Alert is not getting triggered in QA

Hai Experts!
i have transported the Alert Classification and Alert Category from development system to Quality system and i created the alert rule in QA. Now alerts mails are not tiggering. In se30 i have excecuted the RSALERTTEST that time i am getting a mail in the alert inbox and also to my mail box but for a real time data alert is not getting triggered.
Pls help me to solve this issue.
Regard's
Preethi

Hi
Schedule send job
please see as
help.sap says
Send Job
E-mails sent from an SAP application are first stored in a queue. A periodical background process, the SAPconnect send job, gets the e-mails from this queue and sends them over the Internet. To schedule this job in SAPconnect: Administration, proceed as follows:
i.         Choose View ® Jobs.
ii.       If no other job has been scheduled, choose Job ® Create.
iii.      Enter a job name and confirm it.
iv.      Select the variant SAP&CONNECTALL by positioning the cursor on it.
v.        Choose Schedule Job.
vi.      Choose Schedule periodically.
vii.     Select the interval you require, such as 10 minutes.
viii.   Choose Create.
Refer this.
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm

Print program is not getting triggered when saving the application

Hi all,
My requirement is when i save the invoice using VF01 the print program should get triggered.
The print program is not getting triggered when saving the application even when i have configured the outtype and have attached the print program.
The setting "send immediately (when saving application)" is also checked.
I need to configure it for VF01 transaction.
The error message displayed was " please maintain output device in master data".
Regards,
Umesh

Hi Umesh
Please check if you have missed any of the following:
1. Defining Access Sequence(can use existing).
2. Defining Output Condition Type(can use existing). - Assigning the Driver Program and Form in processing routine.
3. Output Determination Procedure
4. Assign Output Procedure to Billing Types
Kind Regards
Eswar

User command is not getting triggered in interactive ALV with LIST display

Hi experts,
I have developed an interactive ALV report with LIST display. Here, the issue is, when i double click a record in the primary ALV list, the control must go to the USER COMMAND event which i have written in my report. But the user command event is not getting triggered at all when i double click any record.
It gives the following information instead.
"Choose a valid function".
(My user command name and its respective form name are same.)
Here is my code..
START-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program       = sy-repid
      i_structure_name         = p_table
      i_callback_user_command = 'TST1'
      i_callback_pf_status_set = 'SET_PF_STATUS'
    TABLES
      t_outtab                 = <dyn_table>
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
ENDIF.
FORM tst1 USING r_ucomm LIKE sy-ucomm
                rs_selfield TYPE slis_selfield.
* Local data declaration
DATA: li_tab TYPE REF TO data,
        l_line TYPE REF TO data.
* Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
                <l_wa> TYPE ANY.
* Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.
* Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>. CASE r_ucomm.
*   When a record is selected
    WHEN '&IC1'.
*     Read the selected record
      READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
      rs_selfield-tabindex.      IF sy-subrc = 0.
*       Store the record in an internal table
        APPEND <dyn_wa> TO <l_tab>.
*       Fetch the field catalog info
        CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
          EXPORTING
            i_program_name         = 'Z_DEMO_PDF_JG'
            i_structure_name       = p_table
          CHANGING
            ct_fieldcat            = i_fieldcat
          EXCEPTIONS
            inconsistent_interface = 1
            program_error          = 2
            OTHERS                 = 3.
Please advice what is the msitake i have done here..

Read the following code:
pass the i_callback_user_command = g_user_command to the ALV function module and write the FORM user_command USING ucomm    LIKE sy-ucomm
                        selfield TYPE slis_selfield.
as shown below.
thanx
Data for ALV display
DATA : gt_fieldcat TYPE slis_t_fieldcat_alv,
        gt_events           TYPE slis_t_event,
        g_variant LIKE disvariant,
        g_user_command      TYPE slis_formname VALUE 'USER_COMMAND',
        g_status            TYPE slis_formname VALUE 'SET_PF_STATUS',
        gt_list_top_of_page TYPE slis_t_listheader,
        g_repid LIKE sy-repid,
        gf_pos TYPE i
Data for ALV display
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
           EXPORTING
          i_callback_program      = g_repid
             i_callback_program      = sy-repid
             it_fieldcat             = gt_fieldcat[]
       it_events               = gt_events[]
          i_callback_user_command = g_user_command
             i_save                  = 'A'
             is_variant              = g_variant
           TABLES
             t_outtab                = it_print.
FORM user_command USING ucomm    LIKE sy-ucomm
                        selfield TYPE slis_selfield.
CASE ucomm.
    WHEN '&IC1'.
      CASE selfield-sel_tab_field.
        WHEN '1-KUNNR'.
          READ TABLE it_print INTO wa_print INDEX selfield-tabindex.
          IF sy-subrc = 0.
            SET PARAMETER ID 'BPA' FIELD wa_print-kunnr.
            CALL TRANSACTION 'BP'.
          ENDIF.
        WHEN '1-MATNR'.
          READ TABLE it_print INTO wa_print INDEX selfield-tabindex.
          IF sy-subrc = 0.
            SET PARAMETER ID 'JP_ISS' FIELD wa_print-matnr.
            CALL TRANSACTION 'JP29' AND SKIP FIRST SCREEN..
           GET PARAMETER ID 'WRK' FIELD wa_zprint-werks.
           SET PARAMETER ID 'VKO' FIELD wa_zprint-vkorg.
           SET PARAMETER ID 'VTW' FIELD wa_zprint-vtweg.
           CALL TRANSACTION 'JP29' AND SKIP FIRST SCREEN.
          ENDIF.
Endcase.
Endform.

Output fax not getting triggered when sales order credit block is released

Hi Experts,
I am working on an issue.
I have one sales Order which has credit block.
when we release the credit block via vkm3, then the output fax gets triggered.
I have another sales order which has credit block,
when we release the credit blcok via vkm3 , the output fax is NOT getting triggered.
If any of you has worked on this setting, request your input on where to find the settings/coding for the same.
Any advice on this please.
Regs,
SuryaD.
Edited by: SuryaD on Oct 21, 2010 9:34 PM

Hi Brad,
Thanks for your response.
Order 1: Issues output fax(ZFAX) correctly when block is released.(i see output zfax in te output screen)
Order 2: Fails to issue output fax(ZFAX) even when the block is released.( i dont see any output in the output screen)
I went to Go to -Determine analysis for both orders 1 and order 2.
in both the analysis i am able to see the output ZFAX.
*Analysis Output*
*Order 1                                                                    Order 2*
1. ZFAX                                                                   1.   ZFAX
    10(Z010)                                                                 10(Z010)
       0000122426                                                              0000122427
2. ZFAX                                                                   2.   ZFAX
When i click, D.Click on the output type ZFAX on both the order Analysis output screen, i see similarities.
There in just 2 differences as below.
In the above screen,
1.Order 1 ==> has some value 0000122426
2.For Order 1==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
Diagnosis
Output ZFAX has already been issued. Multiple issue for this output type is forbidden in Customizing.
In the above screen
1.Order 2 ==> has some value 0000122427
2.For Order 2==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
No more information is available.
Please guide as to how to initiate the debug for output processing ?
Which screen where to switch on debugger.
where to look further?
Regards,
SuryaD.
Edited by: SuryaD on Oct 22, 2010 11:41 AM

Driver program is not getting triggered

Hi Experts ,
I have assigned driver program and form under the application ME to the output type WE01 and WE02 and WE03 .But my program is not getting triggered.
How to check whether the Form entry is getting or not ?
i have also tried putting the break point in the program.
Please suggest .
Thanks

Hi Kartik,
Thanks a lot !
Update for you ......
By refereing std prog i have written the form routine like below.
FORM entry USING ent_retco ent_screen.
xscreen = ent_screen.
CLEAR ent_retco.
PERFORM check_input USING nast-objky.
ent_retco = retco.
    perform fetch_data.
    perform print_control.
ENDFORM.
form check_input using objky.
nast_key = objky.
select single werks from t001w into t001w-werks where werks = NAST_KEY-p_werks.
if sy-subrc ne 0.
   message 'ENTER VALID PLANT' type 'E'.
endif.
endform.                    "check_input
But i am not able to debug the code...
Break point is not triggering the code.

PKBC TCode Enhancements not getting triggered ?

Similar Messages

Maybe you are looking for