Pkgadd: ERROR: unable to determine current run-state

Hello,
I'm working with Solaris 10 5.10 sparc. I have successfully created a package with no difficulties. The package only consists of a bash script that is meant to update system files to enable remote logging and configure a server to accept eventlogs from windows platforms.
After putting together my package, I then try to use
pkgadd -d $PWD on the directory that contains my package. (/export/kelleyt6/kelleyt6_pkg)
The only hint to this error I've managed to find with Google searches is from a SebastianN from years ago:
From ages ago I remember a small bug which prevents pkgadd from determining the current run level, when the server has been up for a long time. iirc, the easiest way to get around it, would be to reboot and run pkgadd again.This is meant to run on a server, so rebooting isn't a very good option. I'm not even sure if rebooting it will help as this tidbit is the ONLY response I've seen to this error. Has anyone else encountered this before? Does anyone know how I might be able to add my package without having to restart core-servers???? I can also restart the zone...but I know that this solution is not preferable either. :-( Any ideas??

Thank you abrante,
after some searching, I've found that several files on this server have been removed. /usr/lib/acct/fwtmp is one of them. Also, /etc/rc[456].d are missing, but I don't think that is the problem. I also notice that rc2.d and rc3.d are disabled. I'm going to have to re-enable those if I can(after its safe to "break" the machine again).
I know we have other packages that have been installed on the system.....so I'm trying to determine why MY package even cares what the run state is. Currently i'm going to re-read through pkgmk and see if there isn't something I can do that makes my package oblivious to run-state....then I'll see if pkgtrans can help.

Similar Messages

[SOLVED] ERROR: Unable to determine the file system type of /dev/root:

:: Running Hook [udev]
:: Triggering uevents...done
Root device '804' doesn't exist.
Creating root device /dev/root with major 8 and minor 4.
error: /dev/root: No such device or address
ERROR: Unable to determine the file system type of /dev/root:
Either it contains no filesystem, an unknown filesystem,
or more than one valid file system signature was found.
Try adding
rootfstype=your_filesystem_type
to the kernelcommand line.
You are now being dropped into an emergency shell.
/bin/sh: can't access tty; job control turned off
[ramfs /]# [ 1.376738] Refined TSC clocksource calibration: 3013.000 MHz.
[ 1.376775] Switching to clocksource tsc
That's what I get when I boot my Arch system. It worked fine for quite a while, but suddenly it ran into an error where the SCSI driver module was corrupt. I fixed it by reinstalling util-linux-ng and kernel26, however, I run into this issue now. http://www.pastie.org/2163181 < Link to /var/log/pacman.log for the month of July, just in case. Yes, I bought a new ATI/AMD Radeon HD 5450 this Saturday, but it seemed to work fine till this broke and it works fine on Ubuntu too, so I suppose we can rule it out.
Last edited by SgrA (2011-07-05 20:45:36)

Autodetection failed on your first image, in both your previous kernel installs:
[2011-07-04 16:14] find: `/sys/devices': No such file or directory
Which means that sysfs was not mounted. You should be able to boot from the fallback image, which does not use autodetect. Figure out why /sys isn't mounted, as well, and fix that.
This is also a somewhat crappy bug in mkinitcpio that lets you create an autodetect image that's useless. It'll be fixed in the next version of mkinitcpio that makes it to core.
Last edited by falconindy (2011-07-04 17:41:19)

ERROR: unable to determine license level

I have Tuxedo 7.1 for windows NT version, and put Lic.txt file in
%TUXDIR%\udataobj\
To make sure, I run License utility 7.1 too.
ERROR: unable to determine license level
do you know what's the problem?
thank,
Kyoungseop Ko

Hi, thanks for the reply. I don't use testing. I had upgraded to kernel 2.6.38.3-1. That caused the problem, so I downgraded to the previous version, 2.6.38.2-1, andthings are OK now.
Edit: I did pacman -Syu on both systems and after upgrading pacman I let it upgrade the kernel and it seems OK now. I would like to know what happened if anyone can shed some light.
Last edited by oboedad55 (2011-04-21 02:32:47)

Error - unable to determine DB and SAP version

Hi!
Getting struct in prepare phase of solution manager 3.2 to 4 upgrade.
Getting error unable to determine the DB and SAP version.
during the prepare during the DBCHK
phase of solution manager getting the error " SEVERE ERROR: unable to
determine DB and SAP version."
The following files must be in the path described by
the environment variable "PATH":
icuuc30.dll, icudt30.dll, icuin30.dll [nlsui0.c 1489] pid = 2268
Kindly assist

dear Elmar,
Hi!
The entries are not there in path, but R3trans -d IS SHOWING ONLY following-
C:\Documents and Settings\smpadm>r3trans.exe -d
This is r3trans.exe version 6.13 (release 640 - 26.02.07 - 15:37:00).
r3trans.exe finished (0000).
And Echo path is - E:\oracle\SMP\102\bin;C:\WINDOWS;C:\WINDOWS\System32;E:\usr\sap\SMP\SYS\exe\run
Kindly suggest
sanjay
Message was edited by:
Sanjay Birari

Unable to determine current location at this time Mavericks

Hello,
I can't get location service running in Mavericks.
I know it worked before. But somehow it stopped working. It doesn't work with map neither.
Thanks in advance.

Perhaps the 'network time server' for the region, that Apple uses, is down at this time(?)
Not sure how one would go about reporting an issue, to somewhere it would matter...
Try unchecking the box next to the automatic time zone location item & set it manually.
{Edit to add: I noticed you asked of this in an older thread, that had suggested this:
OS X Mavericks: Manage which apps can use Location Services
http://support.apple.com/kb/PH14318
And I looked into that link, but it does not explain your issue.}
The same item has occurred several times, as indicated by a few similar named topics
that come up on a search via google of those same words; here's the link to that:
https://www.google.com/?gws_rd=ssl#q=mac+os+x+unable+to+determine+current+locati on+at+this+time
You may have to set the TimeZone manually and turn off the automatic location.
This has been an issue in some places (regional, etc) since OS X 10.6.8. but
I have no way of knowing if the cause may be the same or another behind it.
However such an outage (if it could be proven as such) would be difficult to work
around; short of testing the computer in a different Time Zone to see if that network
server was working. Then you could tell if the issue is in the Time Zone you wanted
to be using, and not in the computer itself. A matter of troubleshooting.
{Since these ASC discussion are generally and simply product users who volunteer &
try to answer some varying levels of questions, an inquiry here does not constitute a
contact with Apple, Inc, directly. So please keep that in mind should nobody know
where to look (if possible) to discover an exact match to your issue.}
So, see if the clock and time zone work if you do not have the Automatic location set
and choose the location manually instead. I don't believe a reset of the System
Management Controller (SMC) or the NVRAM/PRAM may be of help; though these
do have some bearing on settings in the computer, for different purposes.
•Intel-based Macs: Resetting the System Management Controller (SMC)
•About NVRAM and PRAM
Hopefully you won't have to reset anything but the Date/Time panel in the Mac.
Good luck & happy computing!
edited 2x

Apple Configurator: "Unable to determine current price of app"

I'm trying to import an free app to the Apple Configurator. Every time I attempt this I get the error message "Unable to determine current price of app."
I've tried creating a new Apple ID to download the app, swapping the Apple ID associated with Apple Configurator, different phones (I have 25 to deploy) and all with the same problem.
I can only find one other mention of this problem http://techrecess.com/2012/03/supervising-devices-with-apple-configurator/ and there's no solution. I'm hoping somebody else will ahve experienced this and found an answer.
Thanks in advance for any help you can provide.

I think you may have given me the solution. I'll ask the company to make the app available on the US store too and I'll see what happens then.
I might file a bug report or similar with Apple. It would be useful if the configurator checked via the store relevant to the country that the account is registered with. Partially defeats the point of setting an account in the configurator.
Thanks for your help.

Error:Unable to determine data basis for virtual InfoCube.

Hi all,
 I am working on Virtual cubes. I have created a query on virtual cube which is getting loaded from a transaction cube. I am using a transaction cube which is a copy of standard cube 0BCS_C10 - Consolidation (Company/Profit Center). (Transaction cube).
When I execute the query in BEX it is disconnecting from the server and if I execute the same in transaction RSRT it is showing following errors.
1.Unable to determine data basis for virtual InfoCube.
2.Error reading the data of InfoProvider.
3.System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
Will be thankful for suggestions.

Hi Pankesh,
Thanks for the response..
 Transaction cube contains data and characteristics of virtual cube are consistent.
 I am trying to see the contents of the virtual cube in transaction LISTCUBE, there also its showing same errors.
How can I proceed now?

Unable to determine current location

My ipad and imac could locate the location but mac book pro unable to determine the location. OSX is mountain lion 10.8.1. Anybody can help me out plz.

Multiple posts/questions about same topic, problem. I too see this and cannot get it to refresh location of friend. 30 minutes does not help. I cannot make it refresh location or send new location request on a regular basuis

MAX giving error - Unable to locate Labview run-time engine

I have LV 7.1 and 8.5.1 installed on a WinXP pc. No problems until now.
I installed some support software for a LabJack interface, which required LV version 6.1 run-time, so I let it install that.
I now get the error whenever I run MAX:
"Unable to locate the Labview run-time engine. LVBrokerAux71 requires a version 7.1 (or compatible) Labview run-time engine...."
After closing the error boxes, MAX seems to work fine. Both versions of Labview also work. I uninstalled run-time engine 6.1 and re-installed version 8.5.1, but that made no difference. I tried to install run-time version 7.1 from the msi file but it would not let me because a later version of the run-time is installed.
What is LV Broker? Why does it not accept version 8.5.1 run-time engine? Is it possible to have 2 versions of the run-time engine installed, and if so, how?

Dear CDancer
Thank you for contacting NI. First of all, you can have as many versions of LabVIEW run time engines you want loaded on your computer without a problem. LV Broker is installed by all drivers that uses LabVIEW testpanels like DAQmx does. In your case it seems that the LV Broker installation is corrupted or has failed. This can be rectified by overwriting the files in the specified directory listed below:
C:\Program Files\National Instruments\Shared\LabVIEW Broker
Your directory should look like the screenshot I have attached; labelled LV Broker Directory View
I have attached a ZIP File that will replace the LV Broker directory. Please try replacing your files with these if different to the screenshot and let me know how you get on. Many thanks.
Many thanks for using the NI forums and I look forward to your reply.
Kind regards
David
Applications Engineer
National Instruments UK
Attachments:
LV Broker Directory View.JPG ‏57 KB
LV Broker.zip ‏413 KB

[Solved IO/CPU]Determine currently running scheduler

This really isn't an issue so much as it is a general question: Is it possible to determine the currently used CPU scheduler in the kernel?
I've been using -ck after switching from -bfs but still using the BFS scheduler (so I hope). However, recently I noticed my cores aren't all maxed and I'm wondering if that has something to do with it not compiling with the proper scheduler, or if it has something to do with F@H, which has some messages I've never seen before about "Extra SSE boost OK"
I tried googling, and grep'ing through /proc, but I don't know where to look. Found some good articles on the programming behind them, though If it's not possible to find out while it's running, is there some way I could look at the binary or something? Thanks for your help.
Last edited by jac (2010-01-25 04:33:33)

falconindy wrote:% dmesg | grep BFS
BFS CPU scheduler v0.313 by Con Kolivas.
D,oh! Didn't even cross my mind to check dmesg, thank you! It seems it's worknig fine, so it is something different with F@H
@B: Thanks, now I know how to get the io scheduler when I screw with that too

JV variant report error - Unable to determine joint venture details

Hi Guys,
We are testing some of our FX variants and are running into a few JV errors that are preventing us from completing the BDC test session. The transaction which we used is customized one ZFICFX and variants involved are REAL FX. While running the report I'm getting error mentioned in the subject.
Thanks for advance for any productive response.
Regards,
Suvi

Hi Jin Ming,
Something is wrong with your hierarchy.
In my case items hierarchy works fine.
May propose two cases:
1. Which version of your hierarchy, defaulted 100 or not? If not - wait for trouble.
2. Hierarchy are global for all consolidation areas. If you hierarcical structures in different cons areas assigned to different special versions, the I'd not exclude some controversies between globality and special version pecularities.
Hope this helps.

How do I resolve the error "Another installer is currently running, which must be closed before updating" when updating CC on MacOS 10.9.4?

Creative Cloud keeps alerting me to an available update but whenever I try to install it it tells me there is another installer running which must be shut down first.
I've now shut down and restarted the Mac completely and nothing else is running but it still gives me the same error (Error code: 81). See screen shot below.
I'm running Mavericks (OSX 10.9.4). How do I resolve this?

Please try the mentioned steps:
1. Navigate to Applications/Utilities/Adobe Installer and look for CC desktop, if present run the uninstaller to uninstall it.
2. Navigate to Applications/Utilities and look for Adobe Application Manager folder and Creative cloud folder. If present move to trash and empty it.
3. Navigate to Library/Application Support/Adobe/OOBE and rename to OOBE.old
4. Download CC desktop from: https://creative.adobe.com/products/creative-cloud and try to install again.
Other references are:
Troubleshoot CCM Applet installation and download
Re: Adobe application manager fails to update/install
Regards
Rajshree

Unable to determine current location and time

So this bug has never been fixed (persists since SL)? I have the same in ML 10.8.3 with Location Services enabled...
Anybody got this working?

I'm having the same problem. I recently moved from Oregon to Michigan, i.e., new time zone. I travel a lot and have never experienced not having the time zone adjust automatically. I'm running 10.8.4 on a 2009 macbook pro. I can't find any suggestions that seem to be working for everyone.
The weird thing is though, I've been in Michigan for 2 weeks now, and this is the first time I noticed that the time was 3 hours off----which makes me wonder if it HAS been working until today. But I can't be sure. Just seems weird that I didn't notice until now.

Unable to determine the value of component ''! Workflow error, please help

Hi All:
I am getting the error "Unable to determine the value of component ''" and workflows are not getting processed. I found OSS notes 879100 related to this issue but I am new to workflow and not sure where to start from! Here is the notes description:
The workflow WS20500025 ('Service Connection Order Processing') encounters an error directly after being started. The following error messages are displayed in the workflow log:
SWP102: Error at start of an IF branch
WL821: Work item 000000100012: Object FLOWITEM method EXECUTE cannot be executed
SWF_RUN535: Error '9' when calling service 'SO_OBJECT_SEND'
SWF_RUN534: Problems occurred when generating a mail
WL863: Notification of completion cannot be generated
SWF_EXP_001073: Unable to determine the value of component 'QUOTATION'
SWF_EXP_001072: Error in the evaluation of expression '<???>' for item 1
SWF_RLS_001101: Operator 'GT': The value of the left operand cannot be determined
SWP085: Error when starting work item 000000100012
SWP010: Error when evaluating the IF condition for node 0000000075
Other terms
Service connection processing, service connection workflow
Reason and Prerequisites
This is due to a program error.
The checks in the workflow Basis have been made stricter. A query of the type 'Quotation.number > 0' now causes an error if the container element 'Quotation' is not set. This is always the case if the workflow is is running without quotation prcessing, for instance.
Solution
The error is corrected in the next Support Package.
If you want to implement the corrections manually in your system, change the condition in step 000075 of workflow WS20500025 as follows:
&IS-U: Kundenangebot& EX
and &IS-U: Kundenangebot.Verkaufsbeleg& > 0
Save and activate the workflow.
I am new to workflow and not sure where to start from! Could someone please help me with this? Rewards assured.
Thanks.
Mithun

ANy ideas? Please help me if anyone knows the answer.
Thanks.
Mithun

[SOLVED] Unable to determine major/minor number of root device - USB

I installed Arch on a USB harddrive of mine from within VirtualBox with the intention of running the installation (via the drive) on a laptop in my house. I passed through the drive through by creating a special vmdk (here - it's for "expert users only". ) and installed Arch on it by booting off the Arch 2011.08.19 iso and following the instructions. I do recall the installer complaining because /sbin/mkinitcpio was missing, so I copied over the one from the host (which is also an up-to-date Arch system). After that, everything worked and I was able to boot the drive within virtualbox.
Then I went and plugged it in to another laptop in the house and, surprisingly (for me at least), it got past GRUB. My joy was short-lived, because it failed just a bit later:
:: Running Hook [udev]
:: Triggering uevents...done.
ERROR: Unable to determine major/minor number of root device 'Waiting 10 seconds
for device /dev/disk/by-uuid/[the uuid] ...
/dev/disk/by-uuid/(the uuid)'.
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
sh: can't access tty: job control turned off
[ramfs /]#
So I googled around for a while and plugged it back in to my computer, booted it up in virtualbox, and added "usb" to the HOOKS array right after udev in /etc/mkinitcpio.conf. Then I rebuilt the initramfs:
# mkinitcpio -p linux
So I plugged it back into the laptop, booted it, and got the same error.
Later, in an attempt to isolate the problem, I removed "sata" from HOOKS, ran the same mkinitcpio command again, and rebooted the VM. I got what looked like the same error as the one above. yay. So I guess the usb hook isn't being loaded or something like that. (I've since added the "sata" hook back and rebuilt the initramfs so I can mess around in the VM )
I've tried removing autodetect from HOOKS (saw that in some threads) and trying different USB ports on the laptop, but nothing seems to be working. I also checked to see if virtualbox was providing a bogus uuid or something, but the one it's specifying seems to be correct - I looked in my computer's /dev/disk/by-uuid and it matched.
Info on the drive (first partition is /boot, second is swap (derp!), third is /, and fourth is /home):
# sudo fdisk -l /dev/sdg
Disk /dev/sdg: 500.1 GB, 500107861504 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773167 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00016b3d
Device Boot Start End Blocks Id System
/dev/sdg1 * 63 208844 104391 83 Linux
/dev/sdg2 208845 4417874 2104515 82 Linux swap / Solaris
/dev/sdg3 4417875 209230559 102406342+ 83 Linux
/dev/sdg4 209230560 976768064 383768752+ 83 Linux
Screengrab of my VirtualBox storage setup (just for giggles):
My /etc/mkinitcpio.conf:
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run first, so it may be used to
# override the actual binaries used in a given hook.
# (Existing files are NOT overwritten if already added)
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
# Tried this line instead -- didn't work either
#HOOKS="base udev usb autodetect pata scsi sata filesystems usbinput"
HOOKS="base udev usb sata filesystems"
# COMPRESSION
# Use this to compress the initramfs image. With kernels earlier than
# 2.6.30, only gzip is supported, which is also the default. Newer kernels
# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
# compression.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
My GRUB menu.lst:
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
# Linux Grub
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# https://wiki.archlinux.org/index.php/GRUB#Framebuffer_resolution
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/b4a677d0-cb0d-4acd-bb09-2dc2f4b9501f ro
initrd /initramfs-linux.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/b4a677d0-cb0d-4acd-bb09-2dc2f4b9501f ro
initrd /initramfs-linux-fallback.img
# (2) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1
Last edited by UncleNinja (2011-12-02 15:33:21)

UncleNinja wrote:
skunktrader wrote:https://bugs.archlinux.org/task/27385
Perfect! Thank you!
Would it be safe to copy over the version from HEAD into my mkinitcpio?
EDIT: nevermind, derp derp the package is updated
EDIT again: Actually, it's not.
I copied over the init_functions in HEAD into /lib/initcpio/init_functions and rebuilt the initramfs. It worked!
Thanks guys!
Last edited by UncleNinja (2011-12-02 15:35:20)

Pkgadd: ERROR: unable to determine current run-state

Similar Messages

Maybe you are looking for