Pl help me with repeat delta for text info object

Hello during the delta loads delta got failed for some text object, I know how to repeat the request for transction data but not sure how to request the repeat delta for text object like 0material_text.
I mean i am not sure is there way i can go and change the QM status of request to red and then request repeat delta again, so do we follow same procedure for text objects or something else pl suggest.
Pl suggest the steps
due point will be assigned.
Krish

Hi Krish,
With master data delta repeats sometimes you have problems, and you may get a message that Update Mode R is not supported. The only way out of this situation is to do a reinit and load the data again so that you are not missing records. Since this is just master data, the data volume is not going to be too high, and it overwrites so no issues with data either.
See here for reference... Re: Update mode R is not supported by the extraction API
Hope this helps...

Similar Messages

Hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad/ TOUCHPAD is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

Did you download and install the Windows Support software? If you did, did you use the Boot Camp Control icon to set up the trackpad how you want it?
http://www.apple.com/support/bootcamp/
https://discussions.apple.com/community/windows_software/boot_camp

As good will gesture, we can help you with the upgrade for PSE 13. We would request you to place the order for Adobe Photoshop Elements 13 as an upgrade and then we will provide you the full version serial number for the same product against the new upgra

I RECIVED AN EMAIL FROM ADOBE AS : As good will gesture, we can help you with the upgrade for PSE 13. We would request you to place the order for Adobe Photoshop Elements 13 as an upgrade and then we will provide you the full version serial number for the same product against the new upgrade order" IS THIS UPGRADE FREE AND WHAT SHOULD I DO, HOW CAN I HAVE THIS UPGRADE?

Compare with on-line stores. The full version is often cheaper than Adobe's upgrade price.
See this example from Amazon, but check pricing in your own region.
http://www.amazon.com/gp/product/B00N4OLCRO/ref=s9_simh_gw_p65_d4_i2?pf_rd_m=ATVPDKIKX0DER &pf_rd_s=desktop-1&pf_rd_r=0F1GED9546928YP3PHC0&pf_rd_t=36701&pf_rd_p=1970559082&pf_rd_i=d esktop

Can you please help me with validation logic for Events in Table maintenance generator

Can you please help me with validation logic for Events in Table maintenance generator,i.e if i enter record in 1st internal table then automatically 2nd internal table should be updated.

Hi Glen Anthony,
Thanks for replay,
I used foreign key relationship between those 2 internal tables....
I used event 05: When creating a new entry. I want to know the custom logic by which my 2nd Internal table gets automatically updated when i update my 1st Internal table
Thanks Glen.

How to create master data/text for an info object

Hi All,
I am working on a report and having a problem with an info object since it has no master data. This characteristic is supposed to be in the selection parameters and also should contain key and text in it. Since there is no master data for this info object there is no text and keys don't come up. Does any one knows how to add master data to this info object without reloading the ODS?
Thanks

Mike,
You shold load the master data into BW first,
othere wise you can do one thing
goto infopackage and schedule where in the update tab select the radio button
Always update the data,even if no masterdata is exist for that.
Regards.
Prasad

Showin a variable description for an info-object depending on a user login

Hi,
Client requirement is to show a variable description for an info-object depending on a user login.
e.g. a Characteristic Name is Level1 with a description as 'Level1'. If a user in Canada logs in and see a BEx report he should be able to see the description for infoobject Level1 as 'Cost center'. A user in US may wish to see the description as 'Expense center' etc. etc.
Is it possible to do so ? If yes please let me know ASAP.
Do not get confused with language dependant texts.
Regards,
K.Manikandan.

Hi,
I don't think it is possible through standard functionality, but maybe you could try a workaround.
Create a Characteristic (say COMP) with text, and compound it with Infoobject Level1. The values and description for COMP could be
US Cost Center
CN Expense Center
You could make COMP an Authorisation relevant object and check the same with regard to user login, so that the people of sepecific country see only description relevant to their COMP.
In the report Display COMP as Description and Level1 as Key.
But do not that compounding may have an impact on the performance, also look into the implications of the same if you need to do it for a large number of reports/objects.
Hope it helps.
Cheers
Anurag
......don't forget to assign points if it helps......

Data source for 0REGION info object

Hi.,
I need to load master data text for 0REGION info object. Can any one tell the standard data source for 0REGION.
Thanks,
selva

Hi Kumar,
Try these following data sources and choose the opt one.
    0TV_REGION_TEXT
    0CML_REGIN_TEXT
    0FS_REGCON_TEXT
    0EC_REGION_TEXT
    0REGION_TEXT.
With Regards,
Ravi Kanth.

In the tranformation i have deleted a rule for an info object material?

Hi all,
In the transformation i have deleted a rule for an info object material and then moved into quality. The number of columns is 10 after the material is excluded.
And the same transport moveed to production with warning messages.
the number of columns is 11 and it is not 10 when i check in the quality!!
Can anyone help me on this!!
thanks
Pooja

Hi,
As you said you removed the rule in transformation for an object (attribute) in matreila master data object.
Number of column/attrbute will remain same when you will see data in master data object (material). It is just the mapping from source is removed so you will not see any data in that attribute/column for whihc you have removed the rule/transformation.
For removing column you need to remove attribute/Info Object from Master data object (Material) attribute list.
I hope it will help.
Thanks,
S

Generating export datasource for an info object

Hello Guys
I am working on BW 3.5. I need to generate an export data source for an infoobject so that I can load its texts into another target IO. When I go into the infosources tab, and right click on the particular IO, it gives me the option of creating an export data source.
My question is: How do i transport this data source from DEV --> QA? Do we have to re-create the export data source in each system individually, ie DEV, QA and PROD.
Secondly, when I could see the export data source in the the BWQ source system, i tried moving the transfer rules for the DS to the target IO and it gave an error.
Error message:
Mapping between data source 80CRED_GROUPT and source system BWQCLNT100 is inconsistent
Field CRED_GROUP will not be delivered from DataSource 80CRED_GROUPT in source system BWQCLNT100
Field C_CTR_AREA will not be delivered from DataSource 80CRED_GROUPT in source system BWQCLNT100
Field LANGU will not be delivered from DataSource 80CRED_GROUPT in source system BWQCLNT100
Field TXTMD will not be delivered from DataSource 80CRED_GROUPT in source system BWQCLNT100
Why is this happening? And as i asked before, can i transport an export DS or do I create it in each environment individually? Please note: This is an export DS for an info object.

Hi Srinivas,
You can transport the export data source across the landscape(Dev to QA).
You do not eed to generate it in each system.
Also ensure that the conversion of logical system names or the source system names has been maintained.
You are right it looks like the data source creation was a problem hence it is not alllowing importing transfer rules.
You may try to recollect the export data source and transport and then once it is transported successfully replicate metadata of the self system.
Now transport the transfer rules.
Hope it works out,
Best regards,
Sunmit.

Leading single ZERO for char info object

Hi All,
I have a info object which is having characteristic value. It is getting values like this
08976
076534
9865
065435
when it is coming to BW the ZEROs are skipped can some one help to get this value as it is.
IF iam having alpha converision then it add zeros as many has characteristic length define.
Please can someone help , how to get same format as it is.
Thanks

HI,
Check if you are using any conversion in the data source.
Also when you are trying to check the data, select the "do not use conversion" option to view the data.
because if you are using a char data type for the info object you're using, the leading zeroes would be as it is.
Regards,
Joe
Edited by: lazarus_joey on Feb 19, 2012 2:34 PM

Equivalent Data Field for 0EXRATEXACC Info Object

Hi Gurus,
I have created a DSO using 2lis_13_VDITM data source by installing the same Info Source. Here i am not able to find the Equivalent Data Field for 0EXRATEXACC Info Object which is in Transfer Rules.
So, Please let me know the Equivalent Data Field for 0EXRATEXACC Info Object.
Points are assigned defenetely.
Thanks in advance
Peter B

Hi,
U have a field KURRF in table KURRF
*Assign points if helpful.

Wild Cards are not allowed for this info object

Hello Experts,
I am getting some problem, when I trying to find the some selections for info object in variable selection screen; it giving some error like u201CWILD CARDS" are not allowed for this info object.
I am trying to find the search item like this: TELENOR*
When I click on find button it is giving error.
Please any body help me in this matter.
Thanks & Regards
Prathap.

Hi,
You need to create a selections option variable on the characteristic that needs to be filtered.
After doing this, when you run the query, select the * from the dropdown box,and give the value.
Hope this helps u..!!
-Pradnya

Help Needed with HTML code for Image Positioning

Hi All,
Need a little help with some code for positioning images.
I initially used the following:
This is fine, but the border automatically puts a black border around the photo - how do I change it to white? Is there a way to set margins too, to prevent the text butting up against the photo?
I also used the following code with success:
<style type="text/css"
img
float:right;
border:2px solid white;
margin: 0px 0px 15px 20px
</style>
This code works, however the problem with it is it is not individual to just one photo - it moved all my photos and on that page, I wanted one photo floated to left and another to the right.
If I use this code, how can I make it photo specific, so that it only affects the placement, margins and borders of one photo?
Any help would be great.
Thanks

CSS question, not iWeb question. Regardless, use inline CSS styling for the image. You can also wrap the image in its own tag and declare an id or simply declare an id for the img tag, then set the style for the id_name:
<style type="text/css"
img#id_name
float:right;
border:2px solid white;
margin: 0px 0px 15px 20px
</style>
If you want to control the style of more than one image on a page but not all then use a class instead of an id.
the border automatically puts a black border around the photo - how do I change it to white? Is there a way to set margins too, to prevent the text butting up against the photo?
I believe you have discovered a solution for this according to your CSS code. You have set the border to white by looking at the code and adjusting it appropriately. Your margin is declared in the CSS also, adjust the pixels appropriately.
Read up some more on CSS to educate yourself further. I suggest w3schools.com or a CSS forum instead of the iWeb forum if you have CSS questions. It's kind of like if you drive your auto to the supermarket so you decide to go to the supermarket and ask everyone in the produce section to help when you have car problems. All the supermarket does is provide a place to park your auto. If you have car problems then ask a mechanic. iWeb (and most of its users) doesn't specialize in code, it simply provides an area for you to place it. Granted you might get lucky and find a mechanic in the produce section of the supermarket, but you're more likely to find a specialist at an auto swap meet (or CSS coding forum)!

Issue with Repeat Delta

Hi,
R/3 system was down and delta failed for delivery scl lines. This event happened five days back. We have deleted the red request with zero records in the DSO and then tried to re-load..we got a pop up saying last delta was incorrect so we did a repeat delta. Now we noticed, the repeat delta brought the successful records of the previous day. (DUPLICATE records)
Ex: Day1 - 10 delta records
Day2 - 15 delta records - Loads Failed/Repeat Delta - In these 15 records 10 of them are from Day 1.
The key figures are addition in the DSO. Currently the quantities have doubled for day 1 deliveries. Has any body encountered this situation if so how was it handled without re-init. If i'm not clear please don't hesitate to ask.
Thanks,
Varma.

HI RVarma,
As suggested in above post you will be require to do the selective deletion for the duplicate records that come result in wrong value for keyfigure. Now for selective deletion DSO-> manage>Content tab> Selective-> Deletion selection -> give the selction value for keyfield->start---> copy the job ---> sm37 monitor itand wait it to finish.
once finsih, check the contemt of a dso by running the query or display data make sure the data deletes. Now for getting the data
Double click on infopackage --->Scheduler -
> repir full request ---> select .
This will solve your problem
Thanks,
Deepak

HOW CAN I CREATE A GROUP WITH MY CONTACTS FOR TEXTING

HOW CAN I CREATE A GROUP WITH MY CONTACTS FOR TEXTING

Olga, this is not a default feature in iPhone. You need a 3rd party application. I have created a free one, Easy Group, for group texting and group emailing.
http://itunes.apple.com/fr/app/easy-group/id461469079?mt=8
Rémi
Note: I may receive some form of compensation, financial or otherwise,from my recommendation or link.

Pl help me with repeat delta for text info object

Similar Messages

Maybe you are looking for