PL/SQL block to generate i/o

Dear all,
10.2.0.4 on solaris
I want to generate I/O on a table. how can I create a a PL/SQL block which loops into and inserts/updates/deletes and commits on this table and thereby testing the I/O on the table ?
Kai

KaiS wrote:
I want to generate I/O on a table. how can I create a a PL/SQL block which loops into and inserts/updates/deletes and commits on this table and thereby testing the I/O on the table ?What about the db buffer cache? What about Oracle attempting to optimise I/O performance by reducing physical I/O? What about the file system used and the o/s file system cache that does the exact same thing?
How do you now "+test+" I/O? What exactly are you testing? The Oracle buffer cache? The o/s file system cache? The speed of the file system? The speed of the disk(s)?
And if you get a result like "+100 inserts/per second+" - just what does that mean? How are you going to use this number to determine performance for application code, determine potential bottlenecks and so on?
A journey can only start when you know the route and most importantly, the destination. Else you're just wandering around without a clue.

Similar Messages

Get data from PL/SQL block and generate the data file in UNIX

Hi All
i was executing the following code block from Unix Shell Script. The following code was generating the file count_curdate.txt with all require infomrations. The query gives number of records , group by partition_dt
ABC=`sqlplus -s <<EOF > count_curdate.txt
uname/paswd@connectstring
SET HEADING OFF;
SELECT COUNT(*)||','||partition_dt from XYZ group by partition_dt;
exit;
END`
But now i need to change the above code to use dbms_application_info.set_module in it. Could someone let me know how to generate the file using PL/SQL block in Shell Script. I tried writing following code, but it generate count_curdate.txt file with 0 bytes.
ABC=`sqlplus -s <<EOF > count_curdate.txt
uname/paswd@connectstring
set serveroutput on;
SET HEADING OFF;
set feedback off;
BEGIN
     dbms_application_info.set_module ('shm.ksh','get count by day');
     FOR reccur IN (SELECT COUNT(*)||','||partition_dt as "dcount" from XYZ group by partition_dt);
     LOOP
          DBMS_OUTPUT.PUT_LINE(reccur.dcount);
     END LOOP;
end;
exit;
END`

OK, try this:
ABC=`sqlplus -s <<EOF > count_curdate.txt
uname/paswd@connectstring
set serveroutput on;
SET HEADING OFF;
set feedback off;
BEGIN
dbms_application_info.set_module ('shm.ksh','get count by day');
FOR reccur IN (SELECT COUNT(*)||','||partition_dt dcount from XYZ group by partition_dt);
LOOP
DBMS_OUTPUT.PUT_LINE(reccur.dcount);
END LOOP;
dbms_application_info.set_module (NULL,NULL);
end;
exit;
EOF`Or this:
ABC=`sqlplus -s <<EOF > count_curdate.txt
uname/paswd@connectstring
set serveroutput on;
SET HEADING OFF;
set feedback off;
BEGIN
dbms_application_info.set_module ('shm.ksh','get count by day');
END;
SELECT COUNT(*)||','||partition_dt dcount from XYZ group by partition_dt;
BEGIN
dbms_application_info.set_module (NULL,NULL);
END;
exit;
EOF`Edited by: SeánMacGC on May 11, 2009 6:13 AM

Displaying a Message from PL/SQL block to Java Application

Hi
How can One display or populate a message in Java Application, that is generated from a PL/SQL block?

Well, the easiest option would be to have a "message" parameter that gets passed back from the PL/SQL block to the calling Java application.
I'm guessing, though, that you wouldn't be asking the question if the easy solution was a viable option... If that's the case, you're going to have to describe the problem in a bit more detail...
Justin

Alter table then Update in PL/SQL block

I am trying to alter the table then update it :
declare
colCount number;*
begin*
select count(*) into colCount from all_tab_cols where table_name = 'TEST' and owner = 'TEST_OWNER';*
dbms_output.put_line('No of Columns in the table : ' || colCount);*
if colCount = 2 then*
dbms_output.put_line('Table needs upgrade');*
execute immediate('ALTER TABLE TEST ADD COL1 VARCHAR2(100) NULL');*
UPDATE TEST SET COL1 = '123';*
commit;*
else*
dbms_output.put_line('No Changes Required');*
end if;*
end;*
Oracle complains that "COL1" is an invalid identifier.
I also tried substitute the UPDATE statement with
** execute immediate('UPDATE TEST SET VCHCHARSET_OUT='UTF8' WHERE VCHCHARSETNAME='UTF8'');**
and there is something wrong with the construction of an Update statement in the parenthesis.
Am I taking the right approach and just need to figuire out the syntax of single quotes or something else is wrong?
thanks in advance.

Yes, you are absolutely right, I shouldn't alter the table and then update the values.
The reason I need to do it relates to the migration process we utilize in our company. Initially I had a set of SQL commands which I executed migrating from one environment to another and eventually to Production. I had an error in the last SQL command which caused migration process to produce "Failure", however the table was already altered and all the rows except the last one were updated. Since I can't successfully migrate to Production with the failed process I have to generate a PL/SQL block which will take in consideration that in one environment the table has already been modified and in the other one is still needs to be changed.

Performance issue while wrapping the sql in pl/sql block

Hi All,
I am facing performance issue in a query while wrapping the sql in pl/sql block.
I have a complex view. while quering the view using
Select * from v_csp_tabs(Name of View I am using), it is taking 10 second to fetch 50,000 records.
But when I am using some conditions on the view, Like
Select * from v_csp_tabs where clientid = 500006 and programid = 1 and vendorid = 1, it is taking more then 250 secs. to return the result set.
now the weird part is this is happening only for one programID, that is 1
I am using Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
Any one please suggest what are the things i need to check..
I am sorry, I could not provide you the explain plan, because this is in production and I do not have enough prevelage.
Thank you in advance.
Thnx,
Bits

Bits wrote:
I have a complex view. while quering the view using
Select * from v_csp_tabs(Name of View I am using), it is taking 10 second to fetch 50,000 records.
But when I am using some conditions on the view, Like
Select * from v_csp_tabs where clientid = 500006 and programid = 1 and vendorid = 1, it is taking more then 250 secs. to return the result set.That's one problem with views - you never know how they will be used in the future, nor what performance implications variant uses can have.
>
now the weird part is this is happening only for one programID, that is 1
Any one please suggest what are the things i need to check..
I am sorry, I could not provide you the explain plan, because this is in production and I do not have enough prevelage.I understand what you are saying - I have worked at similar sites. HiddenName is correct in suggesting that you need to get execution plans but sometimes getting privileges from the DBA group is simply Not Going To Happen. Its wrong but that's the way it is. Follow through on HiddenName's suggested to get help from somebody who has the privleges needed
Post the query that view view is executing. Desk checking a query is NOT ideal but is one thing we can do.
I don't suppose you can see V$ views on production - V$SQL and V$SQL_PLAN (probably not if you can't generate plans, but its worth a thought)

Anonymous PL/SQL block within a select statement

I read somewhere that it was possible to build an anonymous pl/sql block within a sql statement. Something along the lines of:
select
begin
i = 0;
return i;
end;
from dual;
However, for the life of me, I can't find documentation on this. Could someone please point me to the right place, assuming I'm not just imagining it.
Thanks.

Did you mean, executing a pl/sql block generated from an sql.
declare
cmd varchar2(100);
begin
select 'declare i pls_integer := 0; begin i:=1; end;' into cmd from dual;
execute immediate cmd;
end;
[pre]

SQL within PL/SQL block

This question sound funny. I just want to make sure this rule. In Oracle database before 10g, we can only use DML and transaction control code within PL/SQL block. We can not use DDL or other control languages within PL/SQL block. How about 10g? can I use DDL in PL/SQL block in 10g?
I have created a procedure to drop all materialized view. Drop object is DDL. I used a piece of code like this:
v_sql_stmt1 := 'DROP MATERIALIZED VIEW'||v_schema||'.'||x.mview_name;
EXECUTE IMMEDIATE v_sql_stmt1;
The procedure was compiled successfully. However, when I run this SP, it generate ORA-00905 missing keyword error on EXECUTE IMMEDIATE statement part. Is this caused by missing keyword in sql statement or DROP as DDL can not be used in PL/SQL block? If it is first one, what is the keyword for DROP MATERIALIZED VIEW statement?

The versions of Oracle that run on this planet have been able to do DDL in PL/SQL for quite some time now. The DBAs who blasted off into space with you and worked in a vacuum the past however many years you feel you've been limited by this need to be replaced or re-introduced to Oracle.
For what it's worth, the error looks like you're missing a space.

How to update PL/SQL block/Specs in Repository without cut/paste ?

(cross-posted in METALINK form also)
Hello,
Question: How to quickly update PL/SQL block/specs in a package
Repository Object Browser? (without cut/paste)
Tools: Designer 9i, ROB 9.0.2.6
Detailed description of a problem:
-- there is no good pl/sql IDE working with ROB
(JDeveloper can not work with NOT PRIVATE repository workspace)
-- I use Toad and develop/generate pl/sql object
directly in database.
-- I have to synchronize my work with repository as often
as possible the following way (we do not use read-server model
because afraid of getting 1000s of atomik func and proc):
---- navigate to the pl/sql package
---- select properties
---- click on pl/sql block - get old code in editor
---- copy all new code from Toad into editor
---- remove CREATE OR REPLACE and last line
---- save
---- do the same with specifications
I am looking for some way to do this with some script or
one-button click...
For example, for text files it is possible to use command line
Repository Tool. But I did not found the possibility to make
a script like this:
checkout
update workarea/container/plsql_definition/package_name/body....
.....with new_package_body.txt
checkin
Thanks in advance for any help/advice,
Alex V.

Hi Alex,
I just had an "Ah! I see!" moment. I now understand why you're having trouble and I can explain things so you can move on... I hope!
First it's important to understand that Oracle SCM is designed to support versioning of both files and Oracle Designer objects. Designer objects are stored as rows in specially structured tables that support that specific product. When you look at PL/SQL definitions in the RON you're looking at Designer definitions - not files. As I mentioned before, these are not the definitions of 'real' PL/SQL objects in the data dictionary, but definitions used by Designer (from which the real things can be generated - but that's another story).
If you're using TOAD you should probably avoid accessing the Designer objects. You need to work with files.
Here's a suggestion for a sequence of operations:
- In the RON check out & download the file (e.g. mypkg.plb)
- In TOAD load the package (from DB, or downloaded file), edit, update package in DB
- In TOAD save as mypkg.plb (overwriting the downloaded copy)
- IN RON upload mypkg.plb and check in
If you've not stored the file in Oracle SCM yet, jsut omit the first step.
You could even automate this to an extent using SQL to query the data dictionary views (e.g. USER_SOURCE) after making changes to get the code and edit/overwrite the file contents that way.
Does this help at all?
Keith.

Display an Alert message in PL/SQL block in APEX

Hi,
we are getting an oracle exception while inserting a new row. As it is having the unique constaint on a coulumn.
Now the problem iis we need to Display an "Alert message" based on the input field validation. That java script code for alert has to be embeded nside a PL/SQL block in Oracle APEX Application.
we tried doing this with below code:
Begin
INSERT INTO <<table name>>(ID,NAME) VALUES (s1,:TXT_s2);
exception when others then
htp.p('<script language="javascript">');
htp.p('alert("Exception");');
htp.p('</script>');
end;
If anybody knows .... please reply.
Thanks,
Subarna
Edited by: user9955252 on Apr 21, 2010 1:47 AM

Hello,
APEX Forum is here : Oracle Application Express (APEX)
Regards

Display an Alert message from PL/SQL block in APEX

Hi,
we are getting an oracle exception while inserting a new row. As it is having the unique constaint on a coulumn.
Now the problem iis we need to Display an "Alert message" based on the input field validation. That java script code for alert has to be embeded nside a PL/SQL block in Oracle APEX Application.
we tried doing this with below code:
Begin
INSERT INTO <<table name>>(ID,NAME) VALUES (s1,:TXT_s2);
exception when others then
htp.p('<script language="javascript">');
htp.p('alert("Exception");');
htp.p('</script>');
end;
If anybody knows .... please reply.
Thanks,
Subarna

If your end goal is showing a pretty error message instead of the message that the tables unique constraint raises try the following. This logic will show a nice message and not try to insert non-unique data.
(1) Create a validation of type "Function Returning Error Text".
(2) Place similar code like the following in your validation. Notice that if the unique name does not exist the no_data_found returns null allowing the validation to pass.
DECLARE
v_error varchar2(100);
BEGIN
SELECT 'A person by this name already exists.'
INTO v_error
FROM your_table
WHERE your_name = :P1_YOUR_NAME;
RETURN v_error;
EXCEPTION
WHEN no_data_found THEN
RETURN NULL;
END;

Performance: Operations in Cursor vs. Operations in PL/SQL block

Why does I have a better performance when I program operations in complex cursors instead of programming the same statement in a pl/sql block in a stored procedure?
Operation in a Cursor:
CURSOR c IS
DECODE(name,'Peter','dog','cat') animal
...The same Operation in a PL/SQL block:
begin
if name = 'Peter'
then
animal = 'dog';
else
animal = 'cat';
end if;
end;
...I know that a parsed cursor is placed in the Shared Pool and reference
a context area in the PGA.
Does anybody have an idea?
Message was edited by:
mad

Maybe because if you can write only a SQL query, it is faster than to write PL/SQL code that will do the same job. See following thread for a analog discussion: Re: pl/sql table

How to test for différent Select into a single PL/SQL block ?

Hi,
I am relatively new to PL/SQL and I am trying to do multiple selects int a single PL/SQL block. I am confronted to the fact that if a single select returns no data, I have to go to the WHEN DATA_NOT_FOUND exception.
Or, I would like to test for different selects.
In an authentification script, I am searching in a table for a USER ID (USERID) and an application ID, to check if a user is registered under this USERID for this APPLICATION.
There are different possibilities : 4 possibilities :
- USERID Existing or not Existing and
- Aplication ID found or not found for this particular USERID.
I would like to test for thes 4 possibilities to get the status of this partiular user regardin this application.
The problem is that if one select returns no row, I go to the exception data not found.
In the example below you see that if no row returned, go to the exception
DECLARE
P_USERID VARCHAR2(400) DEFAULT NULL;
P_APPLICATION_ID NUMBER DEFAULT NULL;
P_REGISTERED VARCHAR2(400) DEFAULT NULL;
BEGIN
SELECT DISTINCT(USERID) INTO P_USERID FROM ACL_EMPLOYEES
WHERE USERID = :P39_USERID AND APPLICATION_ID = :APP_ID ;
:P39_TYPE_UTILISATEUR := 'USER_REGISTERED';
EXCEPTION
WHEN NO_DATA_FOUND THEN
:P39_TYPE_UTILISATEUR := 'USER_NOT_FOUND';
END;I would like to do first this statement :
SELECT DISTINCT(USERID) INTO P_USERID FROM ACL_EMPLOYEES
WHERE USERID = :P39_USERID Then to do this one if the user is found :
SELECT DISTINCT(USERID) INTO P_USERID FROM ACL_EMPLOYEES
WHERE USERID = :P39_USERID AND APPLICATION_ID = :APP_ID ;etc...
I basically don't want to go to the not found exception before having tested the 4 possibilities.
Do you have a suggestion ?
Thank you for your kind help !
Christian

Surely there are only 3 conditions to check?
1. The user exists and has that app
2. The user exists and doesn't have that app
3. The user doesn't exist
You could do this in one sql statement like:
with mimic_data_table as (select 1 userid, 1 appid from dual union all
                          select 1 userid, 2 appid from dual union all
                          select 2 userid, 1 appid from dual),
-- end of mimicking your table
         params_table as (select :p_userid userid, :p_appid appid from dual)
select pt.userid,
       pt.appid,
       decode(min(case when dt.userid = pt.userid and dt.appid = pt.appid then 1
                       when dt.userid = pt.userid then 2
                       else 3
                  end), 1, 'User and app exist',
                        2, 'User exists but not for this app',
                        3, 'User doesn''t exist') user_app_check
from   mimic_data_table dt,
       params_table pt
where pt.userid = dt.userid (+)
group by pt.userid, pt.appid;
:p_userid = 1
:p_appid = 2
    USERID      APPID USER_APP_CHECK
         1          2 User and app exist
:p_userid = 1
:p_appid = 3
    USERID      APPID USER_APP_CHECK
         1          3 User exists but not for this app
:p_userid = 3
:p_appid = 2
    USERID      APPID USER_APP_CHECK
         3          2 User doesn't exist

How to use the WHENEVER SQLERROR EXIT statement in a PL/SQL block.

Hi,
I am getting the following error when trying to add the following statement in an PL/SQL block.
WHENEVER SQLERROR EXIT SQL.SQLCODE
[exec] ERROR at line 23:
[exec] ORA-06550: line 23, column 12:
[exec] PLS-00103: Encountered the symbol "SQLERROR" when expecting one of the
[exec] following:
[exec] := . ( @ % ;
How can i use the above statement in the PL/SQL Block? I have only IF statement in that block( between BEGIN and END).
Thanks

Hi,
Usually there's always more than one solution.
Can you post an example of what you're trying to accomplish?
That would be useful.
(Place the tag before and after your example to maintain formatting en spacing, see the [fac|http://forums.oracle.com/forums/help.jspa] regarding available tags)

No Data Found: Exception in SQL inside PL/SQL block

Hi Friends
I am trying to execute an SQL SELECT stmt inside a PL/SQL block. But when i execute the procedure, it gives me No Data Found Exception.
I know it is because no row is fetched in the query, but the condition of the SELECT query i have specified is being satisfied, i have checked it by running it on the SQL prompt.
But somehow, it is not running from inside the PL/SQL procedure.Can anybody help me out on this as to why is this happening?? I am giving my code for reference and have Highlighted the Query inside it:
CREATE OR REPLACE procedure insert_sfdc_account
as
--DECLARE
CURSOR C1 IS
SELECT customer_code, name1, name2, name3, name4, phone_number, fax, web_address, industry_sector, customer_profile, customer_type,
address, city, postal_code, country_key, zzcust_type, vat_code
FROM load_cust_general
WHERE account_group = 'ZSIT';
v_cust_cur c1%ROWTYPE;
-- type sales_tab is table of load_cust_sales_area%rowtype;
v_sales_area load_cust_sales_area%ROWTYPE;
-- v_sales_area sales_tab;
     v_salesorg varchar2(10);
     v_sales_district varchar2(10);
     v_salesoff varchar2(10);
     v_custgrp varchar2(10);
     v_salesgrp varchar2(10);
v_type varchar2(20);
v_nature varchar2(10);
v_partner_code varchar2(10);
v_parent_cust varchar2(20);
v_credit_blk varchar2(20);
BEGIN
open c1;
loop
fetch c1 into v_cust_cur;
exit when c1%NOTFOUND;
for i in (SELECT customer_code, salesorg from load_cust_partner
where customer_code = v_cust_cur.customer_code ) LOOP
dbms_output.put_line(v_cust_cur.customer_code );
                    SELECT partner_code into v_partner_code from load_cust_partner
where customer_code = i.customer_code and salesorg = i.salesorg and partner_function = 'Z1';
dbms_output.put_line(v_partner_code||i.customer_code);
SELECT salesorg, sales_district, salesoff, salesgrp, custgrp INTO v_salesorg, v_sales_district, v_salesoff, v_salesgrp, v_custgrp FROM load_cust_sales_area
          WHERE customer_code = i.customer_code and salesorg = i.salesorg;
               dbms_output.put_line(v_salesorg||i.salesorg);
                    SELECT parent_customer INTO v_parent_cust from load_cust_hierarchy
WHERE customer_code = i.customer_code and salesorg = i.salesorg and hierarchy_type = 'G'; dbms_output.put_line(v_parent_cust);
                    SELECT credit_block INTO v_credit_blk from load_cust_company_cod
          WHERE customer_code = i.customer_code;
dbms_output.put_line(v_credit_blk);
for j in (SELECT account_group, customer_type from load_cust_general
where customer_code IN (select customer_code from load_cust_partner
                              where partner_code = i.customer_code and salesorg = i.salesorg and partner_function = 'ZS'))
                                                  LOOP
-- exit when j%NOTFOUND;
     dbms_output.put_line(j.account_group);
if (j.account_group = 'ZDIS') THEN
v_type := 'DISAC';
          v_nature := '06';
     --     EXIT ;
else
v_type := 'SPACC';
v_nature := '01';
END IF;
dbms_output.put_line(v_type||' '||v_nature);
END LOOP;
INSERT INTO sfdc_account
          (SAP_ACCOUNT_ID__C, NAME, TYPE, RECORDTYPEID, PARENTID, PHONE, FAX, WEBSITE, OWNERID, MARKETING_DOMAIN__C,
INDUSTRIAL_SECTOR__C, ABC_CLASSIFICATION__C, NAME_1__C, NAME_2__C, NAME_3__C, NAME_4__C, PAYMENT_STATUS__C,
CUSTOMER_GROUP__C, ADDRESS_STREET__C, CITY__C, POSTAL_CODE__C, COUNTRY__C, SALES_OFFICE__C, SALESORG__C,
SALESDISTRICT__C, SALESGROUP__C, NATURE__C, VATCODE__C)
VALUES((i.customer_code||i.salesorg), (v_cust_cur.Name1||' '||v_cust_cur.name2), ' ', v_type, v_parent_cust,
v_cust_cur.phone_number, v_cust_cur.fax, v_cust_cur.web_address, v_partner_code, SUBSTR(v_cust_cur.industry_sector,1,2),
v_cust_cur.industry_sector, v_cust_cur.customer_profile, v_cust_cur.name1, v_cust_cur.name2, v_cust_cur.name3,
v_cust_cur.name4, v_credit_blk, v_custgrp, v_cust_cur.address, v_cust_cur.city, v_cust_cur.postal_code,
v_cust_cur.country_key, v_salesoff, v_salesorg, v_sales_district,
v_salesgrp, v_nature, v_cust_cur.vat_code);
end loop;
end loop;
CLOSE c1;
-- Delete data from Load Table
-- EXECUTE IMMEDIATE 'TRUNCATE TABLE load_cust_general';
/* truncate table load_cust_partner;
truncate table load_cust_hierarhy;
truncate table load_cust_sales_area;
truncate table load_cust_company_cod;
commit;
exception
when others then
raise_application_error( -20001, substr( sqlerrm, 1, 150 ) );
END;
Kindly Help.....
Thanks and Regards

Create the procedure again and execute it in SQL*Plus environment and paste the output:
CREATE OR REPLACE procedure insert_sfdc_account
as
--DECLARE
CURSOR C1 IS
SELECT customer_code, name1, name2, name3, name4, phone_number, fax, web_address, industry_sector, customer_profile, customer_type,
address, city, postal_code, country_key, zzcust_type, vat_code
FROM load_cust_general
WHERE account_group = 'ZSIT';
v_cust_cur c1%ROWTYPE;
-- type sales_tab is table of load_cust_sales_area%rowtype;
v_sales_area load_cust_sales_area%ROWTYPE;
-- v_sales_area sales_tab;
v_salesorg varchar2(10);
v_sales_district varchar2(10);
v_salesoff varchar2(10);
v_custgrp varchar2(10);
v_salesgrp varchar2(10);
v_type varchar2(20);
v_nature varchar2(10);
v_partner_code varchar2(10);
v_parent_cust varchar2(20);
v_credit_blk varchar2(20);
BEGIN
open c1;
loop
fetch c1 into v_cust_cur;
exit when c1%NOTFOUND;
for i in (SELECT customer_code, salesorg from load_cust_partner
where customer_code = v_cust_cur.customer_code ) LOOP
SELECT partner_code into v_partner_code from load_cust_partner
where customer_code = i.customer_code and salesorg = i.salesorg and partner_function = 'Z1';
SELECT salesorg, sales_district, salesoff, salesgrp, custgrp INTO v_salesorg, v_sales_district, v_salesoff, v_salesgrp, v_custgrp FROM load_cust_sales_area
WHERE customer_code = i.customer_code and salesorg = i.salesorg;
dbms_output.put_line('Customer_Code : '|| i.customer_code);
dbms_output.put_line('SalesOrg : '|| i.salesorg);
SELECT parent_customer INTO v_parent_cust from load_cust_hierarchy
WHERE customer_code = i.customer_code and salesorg = i.salesorg and hierarchy_type = 'G';
dbms_output.put_line('Successfully Executed SQL st. Error is somewhere else');
SELECT credit_block INTO v_credit_blk from load_cust_company_cod
WHERE customer_code = i.customer_code;
for j in (SELECT account_group, customer_type from load_cust_general
where customer_code IN (select customer_code from load_cust_partner
where partner_code = i.customer_code and salesorg = i.salesorg and partner_function = 'ZS'))
LOOP
-- exit when j%NOTFOUND;
if (j.account_group = 'ZDIS') THEN
v_type := 'DISAC';
v_nature := '06';
-- EXIT ;
else
v_type := 'SPACC';
v_nature := '01';
END IF;
END LOOP;
INSERT INTO sfdc_account
(SAP_ACCOUNT_ID__C, NAME, TYPE, RECORDTYPEID, PARENTID, PHONE, FAX, WEBSITE, OWNERID, MARKETING_DOMAIN__C,
INDUSTRIAL_SECTOR__C, ABC_CLASSIFICATION__C, NAME_1__C, NAME_2__C, NAME_3__C, NAME_4__C, PAYMENT_STATUS__C,
CUSTOMER_GROUP__C, ADDRESS_STREET__C, CITY__C, POSTAL_CODE__C, COUNTRY__C, SALES_OFFICE__C, SALESORG__C,
SALESDISTRICT__C, SALESGROUP__C, NATURE__C, VATCODE__C)
VALUES((i.customer_code||i.salesorg), (v_cust_cur.Name1||' '||v_cust_cur.name2), ' ', v_type, v_parent_cust,
v_cust_cur.phone_number, v_cust_cur.fax, v_cust_cur.web_address, v_partner_code, SUBSTR(v_cust_cur.industry_sector,1,2),
v_cust_cur.industry_sector, v_cust_cur.customer_profile, v_cust_cur.name1, v_cust_cur.name2, v_cust_cur.name3,
v_cust_cur.name4, v_credit_blk, v_custgrp, v_cust_cur.address, v_cust_cur.city, v_cust_cur.postal_code,
v_cust_cur.country_key, v_salesoff, v_salesorg, v_sales_district,
v_salesgrp, v_nature, v_cust_cur.vat_code);
end loop;
end loop;
CLOSE c1;
-- Delete data from Load Table
-- EXECUTE IMMEDIATE 'TRUNCATE TABLE load_cust_general';
/* truncate table load_cust_partner;
truncate table load_cust_hierarhy;
truncate table load_cust_sales_area;
truncate table load_cust_company_cod;
commit;
exception
when others then
raise_application_error( -20001, substr( sqlerrm, 1, 150 ) );
END;
SQL> set serveroutput on
SQL> exec insert_sfdc_account;

Call to concurrent program in a pl/sql block does not COMMIT data to table

I have the following PL/SQL block.
                         apps.create_po(x_org_id,x_document_num,x_agent_name,x_vendor_id,x_vendor_site_id,x_ship_to_location,x_bill_to_location,x_creation_date,new_isbn,new_print_key,new_unit_setup_cost,new_unit_run_cost,x_item,x_category_id,x_item_description,x_unit_of_measure,x_quantity,x_unit_price,x_ship_to_org_id,x_promise_date,x_qty_rcv_tolerance, x_deliver_to_location,x_destination_org_id, x_destination_subinventory,x_segment2,x_segment4);
                              COMMIT;
FND_GLOBAL.APPS_INITIALIZE(v_user_id,v_resp_id,201);
v_po_req_id := apps.fnd_request.submit_request('PO','POXPOPDOI',NULL,NULL,NULL,
                              NULL,'STANDARD',NULL,'Y',NULL,'APPROVED',NULL,NULL,NULL,NULL,NULL,NULL,
                              NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,
                              NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,
                              NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,
                              NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,
                              NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,
                              NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,
                              NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,
                              NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,
                              NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL
                              DBMS_OUTPUT.PUT_LINE('Request ID is:' || v_po_req_id);
                              IF v_po_req_id <> 0 THEN
                                   dbms_lock.sleep(60);
                                   dbms_output.Put_line('Sleep executed');
                                   COMMIT;
                                   select PHASE_CODE,STATUS_CODE INTO v_phase_code,v_status_code
                                   FROM FND_CONCURRENT_REQUESTS
                                   WHERE REQUEST_ID = v_po_req_id;
                                   dbms_output.put_line('After commit Phase and status codes are = '||v_phase_code || v_status_code);
                              ELSE
                                   ROLLBACK;
                              END IF;
                              dbms_output.put_line('New Po is' || x_document_num);
                              dbms_output.put_line('Quantity Is'|| x_quantity);
                              apps.receive_po(x_document_num,x_quantity);
                              v_rcv_req_id := apps.fnd_request.submit_request('PO','RVCTP',NULL,NULL,NULL,
                              'BATCH',NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,
                              NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,
                              NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,
                              NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,
                              NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,
                              NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,
                              NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,
                              NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,
                              NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,
                              NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL
                              DBMS_OUTPUT.PUT_LINE('Request ID is:' || v_rcv_req_id);
                              IF v_rcv_req_id <> 0 THEN
                                   COMMIT;
                                   DBMS_OUTPUT.PUT_LINE('COMMITED RECEIVING');
                              ELSE
                                   ROLLBACK;
                              END IF;
Presently when this block runs, i can see the new PO number created. Commit is also successfully executed. The last output for the program is
New Po is 20651
Quantity Is 450
But due to some reason, the receiving program(receive_po) cannot retrieve the same PO from the base table.
But once this pl/sql block is complete, and i call the receving procedure from a different session, the Po is retrieved and receiving against the PO is executed successfully.
Can someone please suggest a work around ? Is the code missing something ? Since POXPOPDOI is a concurrent program which is executed as an asyncronous process, the commit statement after the call to concurent program does not work but the commit is executed only after it exits the pl/sql block.

Thanks for responding.
receive_po() program just inserts the data into RCV_HEADERS_INTERFACE and RCV_TRANSACTIONS_INTERFACE tables based on the PO that is created in the previous step. So basically the new PO created has to be received and the receive_po() just inserts data into the interface tables so that RVCTP can be called after that for receiving.
Here is the code for the procedure.
SET SERVEROUTPUT ON;
--FND_GLOBAL.APPS_INITIALIZE(3,20707,201);
--Procedure for receiving interface to load data to RCV_HEADERS_INTERFACE and RCV_TRANSACTIONS_INTERFACE
CREATE OR REPLACE PROCEDURE receive_po (x_ponum IN VARCHAR2,x_quantity IN NUMBER) AS
v_vendor_site_id NUMBER;
v_vendor_id NUMBER;
v_agent_id NUMBER;
v_ship_to_organization_id NUMBER;
v_item_id NUMBER;
v_uom_code varchar2(25);
v_subinventory varchar2(25);
v_ship_to_location_id NUMBER;
BEGIN
--header information in variables
dbms_output.put_line('Entering Receiving Insert Procedure');
dbms_output.put_line('Po number ='||x_ponum||'$');
dbms_output.put_line('Quantity is ='||x_quantity||'$');
select pvsa.vendor_site_id into v_vendor_site_id
FROM po_headers_all pha,po_vendors pv, po_vendor_sites_all pvsa
where pha.vendor_id = pv.vendor_id
and pv.vendor_id = pvsa.vendor_id
and pha.segment1 = x_ponum;
dbms_output.put_line('Vendor Site ID is' ||v_vendor_site_id);
select pv.vendor_id into v_vendor_id
FROM po_headers_all pha,po_vendors pv, po_vendor_sites_all pvsa
where pha.vendor_id = pv.vendor_id
and pv.vendor_id = pvsa.vendor_id
and pha.segment1 = x_ponum;
dbms_output.put_line('Vendor ID is' ||v_vendor_id);
select plla.SHIP_TO_ORGANIZATION_ID into v_ship_to_organization_id
from PO_HEADERS_ALL pha, PO_LINE_LOCATIONS_ALL plla
where pha.PO_HEADER_ID = plla.PO_HEADER_ID
and pha.segment1 = x_ponum;
dbms_output.put_line('Ship to org is' ||v_ship_to_organization_id);
select agent_id into v_agent_id
FROM po_headers_all
WHERE segment1 = x_ponum;
dbms_output.put_line('Agent ID is' ||v_agent_id);
--printing header table information
dbms_output.put_line('vendor id is:'||v_vendor_id);
dbms_output.put_line('vendor site id is:'||v_vendor_site_id);
dbms_output.put_line('agent id is:'||v_agent_id);
dbms_output.put_line('ship to organization id is:'||v_ship_to_organization_id);
--line information in variables
--derive item id
select pla.item_id into v_item_id
from po_headers_all pha, po_lines_all pla
where pha.po_header_id = pla.po_header_id
and pha.org_id = pla.org_id
and pha.segment1 = x_ponum;
--derive uom
select pla.unit_meas_lookup_code into v_uom_code
from po_headers_all pha, po_lines_all pla
where pla.po_header_id = pha.po_header_id
and pla.org_id = pha.org_id
and pha.segment1 = x_ponum;
--derive subinventory
select pda.destination_subinventory into v_subinventory
from po_headers_all pha, po_lines_all pla,po_distributions_all pda
where pha.po_header_id = pla.po_header_id
and pla.po_header_id = pda.po_header_id
and pla.po_line_id = pda.po_line_id
and pha.org_id = pla.org_id
and pla.org_id = pda.org_id
and pha.segment1 = x_ponum;
--derive ship to location id
select ship_to_location_id into v_ship_to_location_id
from po_headers_all
where segment1 = x_ponum;
--printing transaction table details
dbms_output.put_line('item id is:'||v_item_id);
dbms_output.put_line('UOM is:'||v_uom_code);
dbms_output.put_line('subinventory is:'||v_subinventory);
dbms_output.put_line('ship to location id is:'||v_ship_to_location_id);
--insert data into the receiving interface header table
INSERT INTO RCV_HEADERS_INTERFACE
HEADER_INTERFACE_ID          ,
GROUP_ID               ,
PROCESSING_STATUS_CODE      ,
RECEIPT_SOURCE_CODE          ,
TRANSACTION_TYPE          ,
LAST_UPDATE_DATE          ,
LAST_UPDATED_BY          ,
LAST_UPDATE_LOGIN,
CREATION_DATE               ,
CREATED_BY               ,
VENDOR_ID               ,
VENDOR_SITE_ID               ,
SHIP_TO_ORGANIZATION_ID ,
EXPECTED_RECEIPT_DATE          ,
EMPLOYEE_ID               ,
VALIDATION_FLAG
SELECT
RCV_HEADERS_INTERFACE_S.NEXTVAL,
RCV_INTERFACE_GROUPS_S.NEXTVAL,
'PENDING',
'VENDOR',
'NEW', -- 'CANCEL',
sysdate,
3,
3,
sysdate,
3,
v_vendor_id,
v_vendor_site_id,
v_ship_to_organization_id,
sysdate+5,
v_agent_id,
'Y'
FROM DUAL;
commit;
--insert data into the interface transaction table
for i in 1..1 loop
INSERT INTO RCV_TRANSACTIONS_INTERFACE
(INTERFACE_TRANSACTION_ID     ,
HEADER_INTERFACE_ID     ,
GROUP_ID               ,
LAST_UPDATE_DATE          ,
LAST_UPDATED_BY          ,
CREATION_DATE               ,
CREATED_BY               ,
LAST_UPDATE_LOGIN,
TRANSACTION_TYPE          ,
TRANSACTION_DATE          ,
PROCESSING_STATUS_CODE      ,
PROCESSING_MODE_CODE          ,
TRANSACTION_STATUS_CODE     ,
QUANTITY               ,
UNIT_OF_MEASURE          ,
ITEM_ID ,
AUTO_TRANSACT_CODE          ,
RECEIPT_SOURCE_CODE          ,
SOURCE_DOCUMENT_CODE          ,
SUBINVENTORY               ,
DOCUMENT_NUM               ,
SHIP_TO_LOCATION_ID           ,
VALIDATION_FLAG
SELECT
RCV_TRANSACTIONS_INTERFACE_S.NEXTVAL,
RCV_HEADERS_INTERFACE_S.CURRVAL,
RCV_INTERFACE_GROUPS_S.CURRVAL,
SYSDATE,
3,
SYSDATE,
3,
3,
'RECEIVE', --'RECEIVE', -- 'SHIP', --'06-JAN-1998',--question here
sysdate,
'PENDING',
'BATCH',
'PENDING',
x_quantity,
v_uom_code,
v_item_id,
'DELIVER', -- 'RECEIVE', --'DELIVER',
'VENDOR',
'PO',
v_subinventory,
x_ponum,
v_ship_to_location_id,
'Y'
FROM DUAL;
end loop;
commit;
END receive_po;
I am really stuck and looking out for work arond. Please help.
Thanks,
Natasha

PL/SQL block to generate i/o

Similar Messages

Maybe you are looking for