PL Stock in transfer exceeded by 9.667 PAC : CON00407 0020 0503
PL Stock in transfer exceeded by 9.667 PAC : CON00407 0020 0503
i checked issuing quantity and unit also.
The message says that you have not enough stock in transit.
Maybe it is already received (maybe overrecived from another order)
Did you enter the same batch?
Do you do goods issue and PO and receipt in different units?
Similar Messages
-
MB1B transfer posting error "SL stock in transfer exceeded by 20 PC."
Hi All,
I'm doing a MB1B transfer posting for my materials from 1 storage location to another using movement type 311,
but some of the materials I encountered this error.
"SL stock in transfer exceeded by 20 PC : 'Material name' 'Plant' 'Stor. Loc' "
I went to MB5T to check the materials if it's in the stock in transfer, but they are not in the list.
I've also check in MMBE to check the stock value of these materials, it shows 100 in unrestricted use which is more than what I'm transferring.
May I know what have i missed checking?
Please help and thank you.Hi There
Seems you are trying to do the One step Transfer between locations (311), So it is not required to look into the 313, 315 steps (Stock in trasfer, Removal and palce in transfer)
From the Suppling location these Material and Batch is reserved for some purpose(261 or 201) and these material may under Dynamic Availability Check, In this case even if you have the stock in Location if it is hard allocated for some other purpose you cant use this qty
Please check the above settings.
Thanks
Senthil P -
PL Stock in transfer exceeded by NOS
Dear Expert,
Our one user wrongly done the 305 ( Place in stoage) entry twice. but when i'm trying to rectify (Reverse entry ) it is swoing me following error.
PL Stock in transfer exceeded by 36 NOS ,
Message no. M7022
But when i have checked system message showing "warning" the MM -> Inventory Management and Physical Inventory - >Define Attributes of System Messages.
Is it right path or may different.
Please help me about this problem.
Regards,
PK.Some system messages are program specific messages which can't be changed in SPRO settings.
Check this SAP help
http://help.sap.com/saphelp_46c/helpdata/fr/e3/6cec6eb435d1118b3f0060b03ca329/content.htm
which says..
Caution
Messages M7 021 and M7 022 can only be used for the following cases:
Goods movement with reference to a reservation:
If more than the reserved quantity is withdrawn, you can have either a warning message or an error message issued.
Negative stock allowed:
If the stock balance becomes negative due to a withdrawal of goods, the system can issue a warning or an error message. If no negative stock is allowed, the system always issues an error message.
Morever you get this message as error when you try to place the stock in sloc for the second time with reference to the material document(remove stock from sloc).. system wont allow to place the stock twice with reference.. please check whether you placed the stock with reference or you transfered the stock through 301.. in any case, if you have more stock in a sloc.. why dont you try 301 to rectify it as a work around. -
PL Stock in transfer exceeded by 1 EA : 1017 053 0001
Hi experts,
i am getting the following error while posting a goods movement with movement type 305.
PL Stock in transfer exceeded by 1 EA : 1017 053 0001
Please let me know how can i resolved this.
If possible please let me know the table-field which influences this error.
Thanks & Regards,
AmitWhy do use 305 movement?
305 is the second step of of a plant to plant transfer in 2 steps. you never do a second step before the first.
first step is 303. if 303 is not possible in your system (because of the error you have) why do you get the idea that you have to post something with 305?
What business case is the background for your action? -
M7022 - PL Stock in transit exceeded by 1 PC
Hi,
The PO is created.Delivery note and GI has been archived.
The stock is in open order quantity.
When i am trying to do the MIGO with movement type 101,Its showing this error PL Stock in transit exceeded by 1 PC.
Can anyone help me to resolve this issue?
Thanks in Advance!!!!!Hi Sreeni,
Please refer to SAP Note 392205..
Cause and prerequisites
The R/3 system is designed so that the stock in transit can only be posted
through stock transport orders (creation during goods issue, reduction
during goods receipt).
Purchase order and material master record can have different units of
measure. The purchase order is then closed when the goods issue quantity
and quantity of goods received are the same in order unit. However, in the
material master record, the stock in transit is managed in the base unit of
measure.
On account of system-dependent and program-internal rounding effects which
cannot be avoided, the open stock in transit quantities in order unit and
in base unit of measure might not balance to zero at the same time.
Example 1
Stock transport order over 100 pallets. Conversion factor 1 kg = 3
pallets.
Goods issue in one step: 33.333 kg are posted to the stock in
transit (quantity fields of the material master record have an
accuracy to three decimal places in R/3).
Partial goods receipt over 50 pallets. It reduces the stock in
transit by 16.667 kg.
A second partial goods receipt over the still outstanding 50
pallets fails as only 16.666 kg remained in the stock in transit
30.08.2008 Page 2 of 5
Note 392205 - Analysis of stock in transit/correction for split valuation
but 16.667 kg should be booked out again.
Example 2
Stock transport order over 1 pallet, conversion factor 1 pallet =
10000 pieces. In the material master record, an alternative unit of
measure 'Carton' is managed (conversion factor: 1 carton = 1234
pieces).
During goods issue, 1 carton is now entered. As there is a
conversion only from the carton unit of measure to the piece base
unit of measure, the system first converts to 1234 pieces. These
are then converted into order unit of 0.123 pallets via the factor
of the purchase order. The system now posts 0.123 pallets and 1234
pieces.
A goods receipt over 0.123 pallets (default quantity and unit) is
now executed over 1230 pieces and leaves 4 pieces in the stock in
transit.
Solution
Organizational solution
You can avoid the effect if you use the stock transport order according to
the business idea that it is based on. A corresponding goods receipt should
be posted for every goods issue.
Goods issues in N substeps and goods receipts in M substeps with N < > M or
non-corresponding quantities/units do not match the business process
intended for stock transport orders.
Correction of the stock in transit without purchase order
reference
Note 389484 makes movement types 557 and 558 available. These are derived
from the class of the scrapping movement types and can post the stock in
transit without purchase order reference. For actually visible
problems, excess stock in transit can be removed or missing stock in
transit can be created with this.
A report is attached to the current note; this report tries to explain the
stock in transit using the documents existing in the system.
Prerequisites
This report requires that program RM07APP1 exists in your system and date
"12.01.2001" is contained at the program start in the comment block. If
this is not the case, the program is to be updated by importing the
transport mentioned in Note 198596.
Regards
Merwyn -
Capturing Stock in transfer qty and open PR qty
hi
I am developing a report where I want to capture the following data:
1) Stock in transfer CC quantity (Inter company transfer)
2) Open PR quantity
Can you plz suggest from where(Table name) I can capture this data?
Answer will be awared with full points........
Regards
SOpen Qty PR, You can check Comparing Tables EBAN & EKBE through Pur Req Number
Thx
Raju -
Error: PL Stock in transit exceeded by 112 SU
Hi all,
While doing MIGO, I get error message while trying to post goods receipt: "PL Stock in transit exceeded by 112 SU : XXXX (Material) XXXX (Plant) XXXX (Storage locaion)"
I have checked in MB5T transaction but it shows - 'List contains no data'
What can i do to solve it.
Awaiting for kind repy.
Thank you!!hi ,
i have a similar prob:
the scenario is as below:
Interplant movt from 1 plant to another with stock transport order (SA)
qty 154 ea issued at the supplying plant and shows in the stock in transit (MB5T) same 154 ea.
but while GR i get error "PL stock exceeded by 30 ea"
please provide me a solution.
p.si dont want to covert error message to warning message and go ahead
regards
jithu. -
Cross company stock transfer, in which table "stock in transfer CC"
Dear Gurus,
When I do cross company stock transfer, in which table quantity for "stock in transfer CC" will get updated?
Rgds
SarHi there
Just with th report transaction MB5T
I think your purpose will be solved using that report
just check the flag cross company code in the initial screen
*the qty gets updated in the table MSEG feild MENGE.*
Reward if usefull
Sujoy
Edited by: SUJOY KUMAR PAL on Feb 15, 2008 6:07 AM -
Can i transfer stock with transfer order in Inventory management?
Can i transfer stock with transfer order in Inventory management between two storage locations in the same plant?
I hope you are referring a transfer order and the transfer between two storage locations connected to the same warehouse, and just not doing movement at IM level with a transfer order.
But, if you are referring to making a bin-bin transfer within the warehosue and you want to influence the storage location to storage location automatically, yes, you can do this. You should use 'storage location control' configuration under WM-IM interface to drive this. Essentially, you need to maintain the warehouse, destiantion storage type, plant, destination storage location and movement type 311. When you perform the transfer order confirmation to move inventory from a storage type (inventory is under source storage location) to the destination storage type (per the configuration setting) there will be an automatic transfer posting made to move inventory at IM level from source to desintation storage location. -
Is Retail: Store to Store transfer: Deficit of PL Stock in transfer
All,
We are trying to transfer inventory from Store A to Store B.
Both stores have -ve inventory turned on at storage location level. We are trying to transfer using 303 movement type.
While executing the transfer we are getting a "Deficit of PL Stock in transfer XX EA" error.
Checked the article master for the article and neg stocks is turned on for that article in store A and store B.
What could be the reason for this error?
Would appreciate any inputHi,
Can you please provide more details
Store A - Stock Quantity..?
Store B - Stock Quantity..?
Transaction where you are trying this scenario
Regards,
Satish -
Deficit of PL Stock in transfer 10 EA : 100100051 IBM2
hi,
Deficit of PL Stock in transfer 10 EA : 100100051 IBM2
Message no. M7021
please tell me about this?
Regards,
SwathiHi Swathi,
Please let me know what all the values you are entering in MB1C trxn code.
Generally it wont show the error. Please chek the plant & storage location.
Revert back in case not solved.
Reg,
Ashok
Rewards welcome. -
TCODE List document STOCK IN TRANSFER
Hi All,
Somebody kown TCODE like MB5T to see documents related STOCK IN TRANSFER???
We have outbound deliveries (Delivery Type UL - Del.for Stock Trans. u2013 Movement Type 603 - TF rem.fm stor.to pl) waiting for Goods Receipt that we canu2019t determinated.
Please let me know
Regards,
NACUThank Shiva, but we don't have purchase order, que have outbound delivery, it's trhe first document.
First, we have a outdelivery with movement type 603 which put material at stock transfer then we use MIGO (A01 / R05) to transfer into unrestricted-use stock the material posted into stock in transfer in the receiving plant using movement type 603.
We need know this outboud delivery number, VL06 didn'y have tihis information.
Regards, -
Table for "Stock in transfer CC"
Hi
I am using cross company stock transfer scenarion. We can see the stock in transfer with the transaction MB5T or we can use the transaction MMBE to see the "Stock in transfer CC".
In which database table this value for "Stock in transfer CC" is stored?
Full points will be rewarded.......
Regards
SEKBE - purchase order history.
You should find there various records e.g. for the delivery, goods issue and goods receipt.
The value is not just stored in one table field, it gets calculated dynamically -
Hi
I am doing GR for STO, but im getting the above mentioned error. I have done the outbound delivery(VL10B) and goods issue(VL02N). However am unable to post GR. Have gone thru most of the threads with the topic, but none had concrete solution. can anyone pls help out in the necessary corrections needed??
ThanksPL stock in transit exceeded means that you want receive more than you issued.
Make sure that the goods issue was not cancelled.
How much did you issue and what was the unit of issue?
How much do you want to receive in which unit?
What is the base unit of your material?
check in your PO item detail history tab how much was issued.
Maybe you overreceived another PO., hence you have not enough in-transit anymore to receive the quantity that was issued for this PO.
Edited by: Jürgen L. on Jun 8, 2010 1:28 PM -
Stock in Transfer(sloc)
Hi
I have material stock of which shows in stock in Transfer(sloc) and not in unrestricted stock.
When I see movements against this it has movement 311 against 1 material document.
I want to know why this material is not in unrestricted stock and why it is available in stock in Transfer(sloc).
Movement 311 is for stock transfer between storage locations as it is one step transfer it should have stock in receving location at unrestricted stock and not at stock in Transfer(sloc).P1062715 wrote:
Hi
>
> I have material stock of which shows in stock in Transfer(sloc) and not in unrestricted stock.
>
> When I see movements against this it has movement 311 against 1 material document.
>
> I want to know why this material is not in unrestricted stock and why it is available in stock in Transfer(sloc).
>
> Movement 311 is for stock transfer between storage locations as it is one step transfer it should have stock in receving location at unrestricted stock and not at stock in Transfer(sloc).
hi,
stock transfer with 311 was one step processes so please check your processes once agian
Now do with 315 movement type and you have to take the sttocks in to s.location
Thanking you.
Maybe you are looking for
-
Trying to omit first line of CSV file (the header)
Hello everybody, Newbie here havin a lil problem. I have this program below that reads in a CSV file. My test CSV file has the follow structure: ID, LastName, FirstName, Phone, Email, 2345, Yez, Wei do, 456-789-0123, [email protected], 2744, Avant
-
Hello Friends, Can u explain me about Open Purchaseorder, ie about the tables and fields that are used in open purchase order and also the Tcode. Thanks in advance, Bannu.
-
How do I unlock my hp mini 110 laptop
It says enter current password then says system halted fatal error cnu9212l4g This question was solved. View Solution.
-
How to I get library songs upgraded from 128k to 256k
How to I get library songs upgraded from 128k to 256k. That is the reason I signed up for match in the first place.
-
Create report with Assembly BOM component
Hi, I have a customer who uses Assembly BOM in his delivery and invoice. In this assembly BOM are some component that they want to see in an report. But in the deliverie you don't see the component items in the line Is there somebody who can tell me