PLA-AT2

Hi Experts,
                We have posted goods receipt on 27/4/2009. We got excise on 28/5/2009. While capturing excise invoice in t code j1iex for goods receipt we are getting error that
PLA-AT2 amount 28.05.2009 is greater than available amount
Message no. 8I659
While capturing excise the document date is 28/5/2009 & posting date is 19/6/2009.  Kindly explain why this error is coming?
Thank you
Sap MM

Hi,
Check the dates (document and posting) in your Goods Receipt document and the excise invoice.
The excise invoice date should be always an earlier date than the MIGO posting date.
Please check the migo posting date and the excise invoice date and revert back.
The Posting date of the GR and the Document date of the Excise Capturing should be adjusted.
Regards,
Vikas

Similar Messages

  • PLA-AT2 amount 24.12.2009 is greater than available amount

    Dear all,
    I have an issue in Production while doing J1IEX....
    While capturing of Part 2 value in J1IEX, the system gives the following issue..."PLA-AT2 amount 24.12.2009 is greater than available amount"
    Kindly any one give the solution.....
    thanks and regards,
    Mohan.M

    Closed.
    We should not give greater than date of MIGO. We should give MIGO transaction date.

  • Error while posting J1IEX - Country India Version

    Hi friends
    While doing J1IEX the following error message has appeared.
    <b>PLA-AT2 amount is greater than available amount</b>. Message No: 8I659
    Required help for resolving the same.

    Hi,
    Why r u using PLA AT2 in J1IEX transaction? The relevance is only with respect to RG23A or RG23C. Check ur account determination configuration.
    Regards,
    Venkatesh

  • Excise Duty Capture

    Hi Gurus,
    I am getting follwoing error while capturing the Excise Duty credit thru J1IEX
    "PLA-AT2 amount 27.06.2007 is greater than availabable amount"
    may I request u 2 help me
    Thanks in advance.

    Dear Vikas,
    Check the setting at India version for  Account determination->Define G/L Account for Taxes for account Name PLA-AT2.Check there is any Debit,credit setting for this account for which Excise Transaction .If Yes Check that for that Transaction G/L Account has maintain or not at  IMG setting at Specify G/L Account per Excise transaction. OR Remove the setting account Name PLA-AT2 with Excise Transaction at Account determination->Define G/L Account for Taxes.
    Rewards if helpful
    Regards
    Sanjay L

  • Available balance in excise register

    Hi All
    I have captured and posted excise at the time of MIGO and Biling document.My PartII register is also showing entries against MIGO captured excise duty.
    I have posted FI JV for fund transfer to PLA on hold and then from J1iH transfered the same to PLA account as well.
    Now when I do monthly utilization J2iun, it is showing zero available balance against RG23A and RG23C and no PLA is showing here for utilization. And only billing invoices are coming for adjustment.
    Can someone suggest what is wrong here.
    Regards
    Mukta

    Hi Kishore
    GL account assignment exist for UTLZ for all the below RG23A and RG23C .
    RG23A BED               
    GL A/c for RG23A BED          
    RG23A SED          
    RG23C BED          
    RG23C AED          
    RG23C SED          
    Offset          
    Mod.Clear          
    GL A/c for PLA BED          
    GL A/c for PLA AED          
    GL A/c for PLA SED          
    GL A/c for PLA CESS          
    CENVAT OH          
    CENVAT sse          
    PLA On Hld          
    Reversal     
    GL account assignment not maintained for the below--
    G/L RG23AN     
    G/L RG23CN     
    G/L PLANCC     
    G/L RG23AE
    G/L RG23CE
    G/L PLAECS
    G/L 23AAT1
    G/L 23CAT1
    GL A/c for PLA AT1
    RG23AT2
    RG23CAT2
    G/L Acc for PLA AT2
    RG23AAT3
    RG23CAT3
    G/L Acc for PLA AT3
    Will this impact monthly utilization, or this is only for fortnightly utilization and any separate settings for monthly utilization?
    Also we have already extracted PLA after doing j1ih and the balance is coming in PLA Register when we see in J2i6.
    Regards
    Mukta

  • Cenvatable BED & ECS not getting picked up in transaction ;J1IEX

    Hi,
    While capturing excise invoice for GR the Cenvatable BED and ECS percentage and value is not picked up automatically. Only the non-deductible CST value is shown.The Excise base amount is also appearing.
    There are two errors:
    1. Quantity could not be converted from NOS to "Message no. V1297".
    2. PLA-AT2 amount 24.02.2007 is greater than available amount. "Message no. 8I659"
    All relevant CIN masters are maintained.The base UOM in Material master is given in NOS (numbers).
    Can anybody help me urgently?
    Regards
    Saikat Halder

    Biswait,
    Thanks for your reply.
    I have maintained the Excise defaults in CIN customisation for our condition based tax procedure TSILTX.  Under "A/P  BED Cond." I have maintained JMOP condition type (Cenvatable) and under "ECS AP"  I have maintained JECP condition type (Cenvatable).
    The Education Cess (JECP) value is coming while I am doing Part-I during GR transaction (MIGO), but the BED value is still not appearing.
    The help option on the field "A/P  BED Cond." in SAP  ECC6.0 says "Condition Type defined in Tax Procedure TAXINJ for Basix Excise Duty on Accounts Payable." . Shall this JMOP condition type work for here ?
    Regards
    Saikat Halder

  • Excise vendor invoice

    Hi Experts,
               Using movement type 122 in MIGO returned all quanity to vendor. For returned delivery document i am capturing excise invoice because to cancel the posted excise invoice. I am getting this error.
    PLA-AT2 amount 24.03.2009 is greater than available amount. Kindly explain me why this error is coming.
    Thank you
    Shakir

    You are trying to pay excise duty through PLA account but the amount you want to pay is not available in your account. So check the amount available in your PLA account. You will get the PLA account number in transactio itself when you simulate .

  • Error simulating Part 1 in (j1iex) without order reference.

    Dear All
                 Error while simulating part 1 for sto in j1iex without order reference. "PLA -AT2 amount (30.09.08)is greater than available amount" please resolve this pblm..
    Regards
    Senthil

    Can you please ensure that you enter the posting date before you save
    the transaction. Also please ensure that the excise invoice date is not
    later than the GR date
    Kindly refer to the revised note 926707.
    Please maintain the text for Message class 8I, message number 659 as
      "Excise Invoice Date Greater than GR Posting Date."

  • ARE1 Reversal

    Hi Friends,
    While reversing the ARE1 and using the Utilisation tab and  entering the excise  values the system triggers"Excise modvat accounts not defined for GRPO transaction and excise group"
    What are the ETT credit/Debit entries to be made (Specify Excise Accounts per Excise Transaction) and the G/L accounts which are to be maintained (Specify G/L Accounts per Excise Transaction)?
    Due to urgency Iam posting this.
    Thanks
    Isaac

    Hi Lakshmipathi,
    1.We have currently maintianed the entries like bwlow and assigned the G/L accounts for both.Is it required to maitain all the Subtransaction types as detailed by you?
    GRPO     XXXX
    GRPO     XXXX        IP
    2.Specify Excise Accounts per Excise Transaction:
    Please let me know whether Iam missing on any entries below or do I need to check other ETT as well....pl elobarate.
    GRPO          Credit     CENVAT clearing account
    GRPO          Credit     CENVAT suspense account
    GRPO          Credit     CENVAT reversal account
    GRPO          Debit     CENVAT on hold account
    GRPO          Debit     PLA AT2 Account
    GRPO          Debit     RG 23 AED account
    GRPO          Debit     RG 23 AT1 Account
    GRPO          Debit     RG 23 BED account
    GRPO          Debit     RG 23 ECS Account
    GRPO          Debit     RG 23 SED account
    GRPO     IP     Credit     CENVAT clearing account
    3 .While reversal itself , the system triggers "Maintain number range object for object J_1IPLA2, year 2008, excise group"- After maintaining the no ranges for the above combination thru SNRO, I am facing the same error
    Thanks
    Isaac

  • Capture and post excise for part goods after Goods receipt for an Import PO

    Hi ALL,
    We have  a scenario, client posted the goods receipt and invoice posted for an import PO
    Now client wants to post excise for part goods. I tried to capture excise by J1IEX with material document, system throwing error, "Excise Details are not maintanied for Vendor 1200059". I checked J1ID vendor excise details are maintained.
    We are using TAXINJ procedure. Please propose a solution for this issue.
    Regards,
    Murthy

    Hi,
    There are two vendors, main vendor and secondary vendor for import PO
    Main vendor for payment to material cost
    Secondary vendor for payment to Excise
    I maintained , ECC and exc ind vendor.
    I did J1I5 -- I updated RG23 part1
    and try to do J1IEX -- capture excise invoice with material doc, getting below error
    "PLA-AT2 amount 07.09.2010 is greater than available amount"
    Please advice
    Regards,
    Murthy

  • Excise Invoice Capturing thru Material Document

    Hi Gurus,
    When i am trying to capture Excise Based on Material document i am getting a Error
    "PLA-AT2 amount 18.05.2009 is greater than available amount".
    How to rectify.
    Thanks in advance
    Ganapathy.V

    Hi Vikas,
    I made a PO for a material with excise.
    At the time of GR i have not recd the Excise Copy from the Vendor.
    So i made the GR by Selecting create with Excise Entry.
    Now i rece the Excise Copy.
    I want to do the part 1-Capturing of Excise in J1iex Capture Excise
    After that my Excise department will Check and Post the Part2 in J1iex Post the Excise invoice.
    This is the Scenario.
    Now i am getiing the Error in Capturing Stage.
    Tks/Rgds
    Ganapathy.

  • RG registers and PLA registers - Extraction Problem

    Hi,
    We have updated balances in table J_2IACCBAL for initial entries for RG registers and PLA registers but the same is not available for extraction in J2I5.
    Could you please advise what the problem is?
    Regards
    Santosh Hegde

    Hi Prasanna,
    We have updated the balance as on 31.03.2007 as per SAP Help. We tried extracting as on 31.03.2007 as well as 01.04.2007.
    Cut over data is as on 31.03.2007 and golive date is 01.04.07.
    Pls help
    Regards
    Santosh Hegde

  • J2IUN only showing PLA Amount balance all NIL

    Hi,
    We are in the implementation phase.
    IN J2iun, only PLA amount is displayed wheras all others are showing 0.00
    Can u suggest what cud be missing in that.
    I searched forum for similar posts and it says extract register from J2i5, and I did that but even then I am not getting values in J2iun.
    Regards,

    Hi, I have tried but system displays the total value but when we try to execute transaction hangs there.
    Steps followed are
    Extract the register (j2i5) for 30.01.09 to 31.01.09
    then J2IUN for the same period, allowing to select the accounts but when I simulate system hangs there,
    could you pls. provide the process step by step.. which helps us a lot
    Otherwise, can i have an option of selecting the relevant register to enter the values in J1IIN transaction.
    regards
    Ramesh

  • HT201272 I made a purchase of an album on iTunes...somehow I deleted the whole album from my iMac and now when I go back to my purchases it does not give me the option to download the whole album again, instead it gives me the option of plaing them...plea

    I made a purchase of an album on iTunes...somehow I deleted the whole album from my iMac and now when I go back to my purchases it does not give me the option to download the whole album again, instead it gives me the option of plaing them...please help!!

    Where are you looking to download them from ? You might be able to redownload them via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your Mac's iTunes. If that album shows there but doesn't have the cloud symbol against it for redownloading then that implies that it's still in your iTunes library

  • Not updating PLA Balance for a month

    We are Extracting PLA Register from  J2I6 for Excise Group XX  , It showed  negative  value in August 2011 , so we went thorough table where PLA balances get updated & can be seen on transaction basis.
    In Table J_2IACCBAL  , we have found some registers is not getting update in July.
    For example
    - Register PLAAT1 on 03.07.2011- Opening balance is  0 .00 while Closing Balance is on 09.06.2011- Rs. 28014.00 , there is no transaction between 10.06.2011 &   02.07.2011.
    Kindly Suggest

    iTunes is using the feed at
    http://feeds.feedburner.com/LiberalArtsRadiowithMarkSutton
    Feedvalidator says the feed does not validate and throws up several errors which may be minor: as the feed has no line returns in it it's almost impossible to read (though this doesn't affect its validity).
    However, the URL for your latest episode is given as
    http://www.liberalartsradio.com/audio/17June242009/
    in the 'enclosure' tag, and this is not a media file (click on the link above and you will get a list including the media file). I would have expected that iTunes would have shown the episode, but just been unable to provide a media file for it, but since subscribing manually doesn't show the entry for June 24 I suppose that iTunes is not recognizing the episode because there is no media file present.

Maybe you are looking for

  • Message processing failed in XML parser

    This is IDoc to file integration. When I test (WE19), I did not put any value in the 'Quantity' field (which is 6 characters long).In the message mapping I put a condition to see if the value is empty then put zero, and it did not give any error. I h

  • Nokia 5800 (Backup Restore Problem)

    Hi! Yesterday I made a Full phone backup with  PC Suite. After that I was going thru all my message (approx 940 of them) in PC Suite, its much eaiser to go thru all with that. And suddenly all messages dissapeared, I tried to reload but no message sh

  • How can I resolve the push button dot issue in oracle forms 10g..?

    Hi All, We have migrated to forms6i to forms10g, in 6i all the push button labels are displaying properly, but in 10g forms its giving dots like this - after displaying some characters. I guess its width problem but how come its changing in 10g alone

  • On mouseclick logic for timeline animation

    So there is a movieclip that goes through certain stages in a Breaking,BrokenLooping,Fixing,brokenPermenant animation cycle I'm just starting to make the actionscript for it but I'm not sure how to go about it, or if the logic is sound. I am a bit ne

  • Can´t open iDvd 6 with any previous project

    Hi, I have a problem, I have been using the iDvd 5 for a long time, now I start to use iLife 6 and I have maked some projects in iDvd 6, and all it´s perfect, but a few days ago I opened a file project to meke a new burn dvd but for some specificatio