PLA Register up date

Hi Sir
I m doing Excise utilization T code - J2IUN date 01.03.2009 to 31.03.2009
J2IUN screen available Amount is PLABED 1,100,000.00
But actually in FS10n date 01.03.2009 to 31.03.2009
GL a/c PLA BED Amount show 2040000.00
So user want to add PLA BED available amount 2040000.00
in J2IUN screen.
What is the way to increase in the PLA BED available amount in J2IUN ?
Or Can I do T code - J1IH (Through TR6 Challan) and up PLA BED Balance ?
And when I up date register through T code-J2I5
All Registers Green Mark
PLA BED Red Mark
Plz guide me.
Reliable answer gets good points.
Thank

Hello Experts,
i have check line items.
why that two doument amount is not coming in PLA BED ?

Similar Messages

PLA register updation

Hi,
I have captured excise invoices and posted. It is getting updated in excise registers (RG23A, RG23C). I ve done the utilization also.
The PLA register is not getting updated. What are the pre requisites for this ?
Rewards Assured. Urgent
regards
B Shar

Hi,
For PLA register to update you need to transfer the amount from ur account to PLA a/c using TR6 challan..
u can use the transaction J1IH for that...
Regards,
abhay

Unable to register my data warehouse in Service Manager

I have been trying to register my data warehouse but keep getting the same error message each time - "Invalid URI: the hostname could
not be parsed." I know the issue is on the ServiceManager database side of things, but there is not a lot of information related to this error message and the info I do find is unrelated to ServiceManager. I have gone as far as building a
brand new data warehouse server and reinstalling all of the data warehouse databases from scratch. It doesn't matter if I tried to register with the original data warehouse environment or the new environment, I get the same error message. I also
received a powershell command from Microsoft Support to help clean up any residual entries in the ServiceManager database that might be left over. At this point I'm at a loss on how to proceed. Anyone ever run into this issue?
Here's the event log message:
Unable to register Service Manager installation with Data Warehouse installation.
Data Warehouse Server: DW_SCSM
Service Manager Management Server: FlowSMRC
Exception: Microsoft.EnterpriseManagement.UI.Core.Shared.PowerShell.PSServiceException: Invalid URI: The hostname could not be parsed.
at Microsoft.EnterpriseManagement.UI.Core.Shared.PowerShell.PSHostService.executeHelper(String cmd, Object[] input)
at Microsoft.EnterpriseManagement.UI.Core.Shared.PowerShell.PSHostService.Invoke(String cmd, Object[] input)
at Microsoft.EnterpriseManagement.ServiceManager.UI.Administration.DWRegistration.Registration.DWRegistrationHelper.AcceptChanges(WizardMode wizardMode)
Also, I tried registering the data warehouse using powershell Add-SCDWMgmtGroup and get an error saying that Cannot associate Service Manager installation on scsm_server with Service Manager Data Warehouse installation on dw_server.

Just got additional information about this error. If you run the following query in SQL pointing to the ServiceManager database you should see the name of the Management Server. The query is:
select * from MT_Microsoft$SystemCenter$ResourceAccessLayer$SdkResourceStore
There is a column named Server_<some GUID> that should contain the Management Sever NetBIOS name. If it has some other name, run an update query to ensure the column has the NetBIOS name of the Management Server. Restart the SCSM Console
and retry the Database Registration again and it should succeed.
Microsoft has said that this is normally caused by either moving the database or database server to another server and the value is never updated.
Try registering the DW Server again and see if you have better luck.

PLA register entries in SAP

Hi All,
I have an scenario where i need to delete some of the entries in the table because finance has posted some nagitive values in 2007. The same values are continuing and register having the balance differences. I need to nullify the same in the table or is there any way i can modify the entries for PLA register.
Once i extract the PLA register using J2I5 and try to see the print preview using J2I6 i am having the mismatch in the balances.
I need to rectify the entries. Is there any table where the system will pick up and show in the print preview for PLA register?
Kindly help..
Regards,
SK

PLA table will be updated based on the JV passed. JV will be passed based on the Accounting document.
Table : J-2IACCBAL

PLA register update

HI GURU,
As per the central excise act, Every customer excise invoice should update PLA register. In SAP PLA register update, when will we pass the TR6 challan on J2IH. There is no relaton between Excise Invoice & PLA register. Because Excise Invoice is going on J1IIN & Print in VF01. Accounting Entry like:
Customer A/c Dr.
Sales Revnue Cr.
Cenvat Suspenses Cr.
Then Pass the FB50 for Cenvat Utilization
PLA on Hold A/c Dr.
Bank Cr.
TR6 Challan Update: J2IH
PLA A/c Dr
PLA on Hold A/c Cr
Same Accounting Entry is updating in PLA register J2I6
But Issue is how to update the PLA register no. in Customer excise invoice PLA no Column?
Can any one guide to me, where is the configuration.
Regards
Deba

Hi Deba,
As per the system point of, there is no other configuration for direct heat the sales invoice amount in PLA register.
Because at the time of sales billing, you can create only the
Customer A/c Dr
Revenue A/c Cr
Cenvat Collected Cr.(Income)
J1iin
Cenvat Suspense A/c Dr (Expen)
To cenvat Payble (liabili)
FB50
PLA on Hold A/c dr
To PLA
J2IUN:
Dr Basic excise duty Payable
Dr Education Cess Payable.
Dr Higher education Cess payable
Cr.PLA BED a/c
Cr.PLA ECESS a/c
Cr.PLA SHEC
                                 Cr. CENVAT   Recoverable Input Basic BED
                                 Cr. CENVAT   Recoverable Input E cess
                                 Cr. CENVAT   Recoverable Input SHEC
                                 Cr. CENVAT   Recoverable Capital Basic BED
                                 Cr. CENVAT   Recoverable Capital E cess
                                 Cr. CENVAT   Recoverable Capital   SHEC
Cr. Service Tax (Availed) u2013Basic
Cr. Service Tax (Availed) u2013 Ecess
Cr   Service Tax (Availed) u2013 SHE cess
I thoght ur problem has to be solved
Regards
Sachin

PLA REGISTER SHOWING MINUS BALANCE

Dear experts,
Can any one tell me, Pla register is showing minus balance, what could reasons for this, how it come minus,and how to correct to postive balance .please help me on this in deatail, pla bed account is showing + balance but register is showing _ balance how to correct this minus balance.
Thanks
AN Reddy.

Hello Mr. Reddy
as u have given that PLA register is showing the minus balance, it is actually that before doin any postings in CIN u need to put up some amount of money to govt. via TR06 challan. and in the latter period wat ever excise is coming out on u is gettin deducted from tat PLA register(which is already maintained with govt).
so u need to maintain the TR06 challan in the system, so that wat ever excise u have to pay gets deducted frm the PLA accnt.
Hope it helps u,
Regards,
yk

How to cell register the date/time when you put a value in another cell

Hello guys!
How do I get a cell (eg A2) tell the date and time when I put a value in another cell (eg A1) in Numbers?
For example, I want to register a cell to read my electricity meter.
I write in cell A1: 45809. When placing this value in A1, I want to appear (on A2) the date and time when I did that record automatically. Is it possible?
I hope you understood the question!
Thank you in advance to those who try to help.

There is not automatic time stamping of on entry of a time. One suggestion I've seen has a cell that has the current date and time. Everytime you cahnge any cell that cell will update. You can then copy that cell and paste the value into your date/time cell adjacent to the meter reading:
Create a new, plain table:
Now in cell A1 enter the formula "=now()" short hand for this is:
A1=now()
now resize the table so it is a table that is 1 cell by 1 cell by selecting any cell, then dragging the table size control in the bottom right corrner towards cell A1:
It should look like this when you have completed this task:
Now create another new, plain table and enter "Date" for cell A1, and "Meter Reading" for B1:
Now you can enter a meter reading (I entered "45671"). Now select the CELL that has current date and time from the first table at the very top, and copy:
Now select the cell in the date column where you want to put the current date and paste values by using the menu item "Edit > Paste Value":

Register Purchase Date Error

trying to register my new macbook pro ... purchased 3/9/2013 ... registration web-app renders an error claiming the date I've entered is not correct for the serial number I've provided ...
bought it new ... paid large some o'cash ... want to register it ... what gives with the registration gadget?

Hello Seraphiclmago,
Did you purchase the device through a Apple Store or third-party site?
-Derrick Lambert

J2IUN - Problem RG23a, Pla register balances

Hi gurus,
We uploaded RG23A Part II in table as 2 crores as well as 2 crores in gl for that.
In pla we uploaded around 50000,
When we gone utilisation they system showing only 84 lakhs in Rg23a and in pla it is showing more then 2 crores, which we are not uploaded any balance in pla.
What would be the reason, please explain us.
Regards
Sreenivas.P

please check once in automatic account determination that which G/L a/c been congi for RG23A & PLA
path
Logistic Genrel -> tax on good movement -> India -> account determination -> Specify G/L Accounts per Excise Transaction
there will be some G/l account, copy them and display with transaction FBL3N to see the amount.
Rgds
S

Wrong Opening balance in PLA register

Hai All,
I am gettig wrong opening balance in PLA for Sec Higher Edu. cess at the time J2I6. I maintained correct opening balance in J_2IACCBAL. Also in G/L accnt i made the same. I am geeting corrct values for PLABED & PLAECS. Here its taking value of RG23SECS
Plz Help me out..
Thanks & Regards
Raghu

Hi,
The opening balance in J2I9 will be picked from G/L accounts directly.
So check for the G/L balance for the period.
Regards,
Brinda

My iPhone 4S register 3G data traffic even if all the app are closed

My iPhone 4S registers 3G data traffic even if all the apps are closed: whenever I'm not under wi-fi I see the 3G icon lighted up whenever I go trough set icon, or calendar or message device...even if all these utilities doesn't require 3G data. If I just check mobile data consumption I see it increasing of few KB per time.
I don't have neither push notifications nor location on, just I don't understand this phenomenon.
Please...forgive me for my English...I'm writing from Italy and it's not so easy to explain what I'm talking about.

I got...but whenever I open the setting icon, I see 3G becoming lit up and colored and..if I check "mobile data consumption" I can find out that this figure increases each time I check it...just going out and into again this section of the settings. Each time I send a message via SMS I see 3G icon colored and lit up again...even if I'm not using any data connection!!!!To avoid the problem I shut down mobile data conncetion when I don't need it and when I'm not under wi-fi...so I can't tell how much is the 3G traffic data generated during one day.
Just I wanted to understand if there's a different method to avoid it...

[Oracle Text]How to register additional datas when indexing documents ?

Hello,
For the moment we index documents (Word, excel, pdf, ppt, html, xml...) from the filesystem and it works well.
Now, we need to attach some informations on each documents and we must be able to search on these attributes, for instance :
We can index a Word document and we would like some additionnal index informations like :
YEAR
SIZE
NUMBER
These informations are stored in a table, the table contains also the path to the documents on the filesystem.
We are able to query a text on the index mixed with a filter on the columns above.
We tought with the solution to store these informations directly in the index, but we don't know if it's a good solution (in term of speed, structure...)
So, Is there any solution to index the documents on the filesystem with extra information at index time ?
Is it possible ? How can we do that ?
What do you think about that ?
Thanks by advance

1. If you're using 12c, you can use ctx_doc.policy_languages. (https://docs.oracle.com/database/121/CCREF/cdocpkg011.htm#CCREF24102)
2. If you want multiple stoplists based on each document's language, you have to use the multi-lexer. For world_lexer, there is one stoplist; since the stoplists are somewhat dynamic (you can add but not remove them), the most accurate way to fetch the list is using ctx_report.describe_index or ctx_report.create_index_script and parse the report.

TP4 - SEVERE: Can't register active data when window has no name

Hello,
I'm getting this message in OC4J console every time PPR is used in a page. It is coming from oracle.adfinternal.view.faces.activedata.SessionDataUpdateManager __getPageDataUpdateManager
Other that my application works ok. I think it's related with ADF bindings... but I don't use bindings at all, just managed beans. This message was not in TP3.
Should I be worried about this message?
Thanks,
Dan

Hi,
I have added "ADF Page Flow Runtime" jar to the project (as "ADF Controller Runtime" was already there) and the message does not appear anymore.
In the test case provided, behavior failure was the one specified at Re: TP4 - PPR and af:subform don't work together. This should be the subject of new bug submission.
Message appears in other pages too, where only PPR is used. I have not noticed any bugs related to this message.
Thanks,
Dan

DAT Drive not registering on sunfire V240

Hi,
I have 9 SUN v240 with which i connected the same DAT drive HP 72GB DDS DAT (PART NUMBER C7439). In six servers
did devfsadm and it registered the DAT. It worked fine but in three of the SUN v240, this command doesnt seem to
do anything. /dev/rmt is not created. I cannot restart the server because they are live/production servers. Is there
any other solution to get this DAT recognised in solaris with out a reboot. Also, i cannot go to OBP (OK prompt) because
ofcourse it needs a reboot.
I checked the st.conf file and the entries of these file are the same in all 9 v240. So i think its not a problem of
st.conf.
Eargerly waiting for a solution.
Here are some of the command outputs from 1 of the 3 servers which donot see the DAT:
[root@vbsmf /kernel/drv] $strings /kernel/drv/st.conf | grep st
# Copyright (c) 1995-2000 by Sun Microsystems, Inc.
"@(#)st.conf
# devices of Sun Microsystems and many 3rd party devices.
# 1 Drive is configured automatically - no entry is needed in st.conf.
# The 3rd party devices do apparently work with the configurations listed.
# the past, but have not been tested by Sun Microsystems. Use these entries
# as your starting point for generating your configuration entries.
#tape-config-list=
name="st" class="scsi"
name="st" class="scsi"
name="st" class="scsi"
name="st" class="scsi"
name="st" class="scsi"
name="st" class="scsi"
name="st" class="scsi"
#name="st" class="scsi"
#name="st" class="scsi"
#name="st" class="scsi"
#name="st" class="scsi"
#name="st" class="scsi"
#name="st" class="scsi"
#name="st" class="scsi"
#name="st" class="scsi"
name="st" parent="fp" target=0;
[root@vbsmf /kernel/drv] $cfgadm configure
Ap_Id Type Receptacle Occupant Condition
configure: No matching library found
[root@vbsmf /kernel/drv] $cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c0 scsi-bus connected configured unknown
c0::dsk/c0t0d0 CD-ROM connected configured unknown
c1 scsi-bus connected configured unknown
c1::dsk/c1t0d0 disk connected configured unknown
c1::dsk/c1t1d0 disk connected configured unknown
c2 scsi-bus connected unconfigured unknown
[root@vbsmf /kernel/drv] $cfgadm configure c2
Ap_Id Type Receptacle Occupant Condition
c2 scsi-bus connected unconfigured unknown
configure: No matching library found
[root@vbsmf /kernel/drv] $cfgadm -val
Ap_Id Receptacle Occupant Condition Information
When Type Busy Phys_Id
c0 connected configured unknown
Jan 1 1970 scsi-bus n /devices/pci@1e,600000/ide@d:scsi
c0::dsk/c0t0d0 connected configured unknown unavailable
Jan 1 1970 CD-ROM y /devices/pci@1e,600000/ide@d:scsi::dsk/c0t0d0
c1 connected configured unknown
Jan 1 1970 scsi-bus n /devices/pci@1c,600000/scsi@2:scsi
c1::dsk/c1t0d0 connected configured unknown FUJITSU MAT3073N SUN72G
Jan 1 1970 disk n /devices/pci@1c,600000/scsi@2:scsi::dsk/c1t0d0
c1::dsk/c1t1d0 connected configured unknown FUJITSU MAT3073N SUN72G
Jan 1 1970 disk n /devices/pci@1c,600000/scsi@2:scsi::dsk/c1t1d0
c2 connected unconfigured unknown
Jan 1 1970 scsi-bus n /devices/pci@1c,600000/scsi@2,1:scsi
[root@vbsmf /kernel/drv] $ls /dev/rmt/0
/dev/rmt/0: No such file or directory
[root@vbsmf /kernel/drv] $ls /dev/rmt
[root@vbsmf /kernel/drv] $devfsadm -v
[root@vbsmf /kernel/drv] $ls /dev/rmt
[root@vbsmf /kernel/drv] $ls /dev/rmt/0
/dev/rmt/0: No such file or directory
[root@vbsmf /] $modinfo
Id Loadaddr Size Info Rev Module Name
6 10158000 445b 1 1 specfs (filesystem for specfs)
8 1015dd40 333c 1 1 TS (time sharing sched class)
9 10160938 8d4 - 1 TS_DPTBL (Time sharing dispatch table)
10 101609c0 291e3 2 1 ufs (filesystem for ufs)
11 10187b33 1f7 - 1 fssnap_if (File System Snapshot Interface)
12 10187c83 10900 226 1 rpcmod (RPC syscall)
12 10187c83 10900 226 1 rpcmod (32-bit RPC syscall)
12 10187c83 10900 1 1 rpcmod (rpc interface str mod)
13 10195cc3 66f08 0 1 ip (IP Streams module)
13 10195cc3 66f08 3 1 ip (IP Streams device)
14 101f30bb 1982 1 1 rootnex (sun4u root nexus 1.91)
15 101f4648 210 57 1 options (options driver)
17 101f4d3c 18d8 12 1 sad (Streams Administrative driver's)
18 101f639c 67b 2 1 pseudo (nexus driver for 'pseudo')
19 101f68a5 1c228 85 1 md (Meta disk base module)
24 1023362d 5234 - 1 md_stripe (Meta disk stripes module)
25 1023847d a760 - 1 md_mirror (Meta disk mirrors module)
26 10242765 10338 109 1 pcisch (PCI Bus nexus driver 1.201)
27 1025111d 1023b 50 1 glm (GLM SCSI HBA Driver 1.166.)
28 1025f310 8ac0 - 1 scsi (SCSI Bus Utility Routines)
29 10264fe4 18008 32 1 sd (SCSI Disk Driver 1.356)
33 1029bf1e a52d 135 1 uata (ATA controller Driver 1.89)
34 102a5713 151f - 1 dada ( ATA Bus Utility Routines)
37 102a7141 93c - 1 todm5819p_rmc (tod module for ALI M5819P)
38 102a7a0b 344f 196 1 rmc_comm (rmc_comm driver, v1.2)
39 102aaa92 508 199 1 pmugpio (Pmugpio Driver 1.1)
40 780b8000 72bf - 1 ufs_log (Logging UFS Module)
41 1027bd5c 1b04a 5 1 procfs (filesystem for proc)
42 102962ba fab 126 1 ebus (ebus nexus driver)
43 10296efd 2fcd 194 1 mc-us3i (Memory-controller: v1.1)
44 10299bba d98 134 1 power (power button driver v1.9)
45 1029a7aa 1016 159 1 pmubus (pmubus nexus driver)
46 10211abd 5cb6 197 1 rmclomv (rmclomv control driver v1.4)
47 1021684b 256a 9 1 pcf8584 (I2C Nexus Driver 1.13)
48 102a689a 464 - 1 i2c_svc (I2C module ver 1.2)
50 102aae3a 10628 8 1 sockfs (filesystem for sockfs)
52 102a6c7b 6be 11 1 clone (Clone Pseudodriver 'clone')
53 1029b5f0 304 2 1 ip6 (IP Streams module)
53 1029b5f0 304 143 1 ip6 (IP Streams device)
54 102bafd2 25e40 3 1 tcp (TCP Streams module)
54 102bafd2 25e40 42 1 tcp (TCP Streams device)
55 10219963 1059 - 1 md5 (MD5 Message-Digest Algorithm)
56 1029b734 365 4 1 tcp6 (TCP Streams module)
56 1029b734 365 146 1 tcp6 (TCP Streams device)
57 1021a907 9b50 5 1 udp (UDP Streams module)
57 1021a907 9b50 41 1 udp (UDP Streams device)
58 1029b8d9 365 6 1 udp6 (UDP Streams module)
58 1029b8d9 365 145 1 udp6 (UDP Streams device)
59 1022292f 7f10 7 1 icmp (ICMP Streams module)
59 1022292f 7f10 5 1 icmp (ICMP Streams device)
60 1029ba7e 30e 8 1 icmp6 (ICMP Streams module)
60 1029ba7e 30e 144 1 icmp6 (ICMP Streams device)
61 10228ea7 651b 9 1 arp (ARP Streams module)
61 10228ea7 651b 44 1 arp (ARP Streams driver)
62 1022e16a 4b93 10 1 timod (transport interface str mod)
64 102d9d66 c83 16 1 conskbd (Console kbd Multiplexer driver )
65 102da65d 1ffa 15 1 wc (Workstation multiplexer Driver )
66 102dba4f 4885 37 1 su (su driver 1.47)
67 102dff2c 3f2e 1 1 elfexec (exec module for elf)
67 102dff2c 3f2e 0 1 elfexec (32-bit exec module for elf)
68 102e3d57 3400 3 1 fifofs (filesystem for fifo)
69 102e6ebf adea 11 1 ldterm (terminal line discipline)
70 102f13b6 246d 12 1 ttcompat (alt ioctl calls)
71 102f365a 9223 29 1 zs (Z8530 serial driver V4.125)
72 102fc375 1568 26 1 ptsl (tty pseudo driver slave 'ptsl')
73 102fd645 211f 25 1 ptc (tty pseudo driver control 'ptc')
77 10318d3b 116a9 - 1 usba (USBA: USB Architecture 1.25)
78 10313719 498c - 1 usbser (USB generic serial module 1.1)
80 1032d854 15ac5 - 1 usba10 (USBA10: USB 1.0 Architecture 1.)
81 781b6000 4012 - 1 usba10_usbser (USBA10 Generic Serial Modul
82 10344153 1c30 13 1 rts (Routing Socket Streams module)
82 10344153 1c30 43 1 rts (Routing Socket Streams device)
83 781e8000 f487 15 1 ipsecesp (IP Encapsulating Security Paylo)
83 781e8000 f487 141 1 ipsecesp (IP Encapsulating Security Paylo)
84 7814e000 ff46 14 1 ipsecah (IP Authentication Header Stream)
84 7814e000 ff46 140 1 ipsecah (IP Authentication Header Stream)
85 7803c000 4af3 105 1 tl (TPI Local Transport Driver - tl)
86 78042000 44ab 16 1 keysock (keysock module)
86 78042000 44ab 139 1 keysock (PF_KEY Key Management Socket ST)
87 78040743 16ea 97 1 sysmsg (System message redirection (fan)
88 780416bd 82c 0 1 cn (Console redirection driver)
89 780e3c1a 475 2 1 intpexec (exec mod for interp)
90 78041d59 2c3 42 1 pipe (pipe(2) syscall)
90 78041d59 2c3 42 1 pipe (32-bit pipe(2) syscall)
91 10354c78 f9d 13 1 mm (memory driver)
92 78046000 8a90 195 1 bge (BCM570x driver v0.22)
93 7804e000 e868 - 1 gld (Generic LAN Driver (v2))
94 7805e000 4eac6 217 1 ce (CE Ethernet Driver v1.135)
95 780b0000 2bd7 - 1 vlan (Ethernet VLAN module (v1) 1.18)
97 780b4000 322b 115 1 pci_pci (Standard PCI to PCI bridge nexu)
98 780b7ad5 5ac 19 1 dump (crash dump driver)
99 780c0000 4421 201 1 doorfs (doors)
99 780c0000 4421 201 1 doorfs (32-bit door syscalls)
100 780c6000 2d06 88 1 devinfo (DEVINFO Driver 1.33)
103 780ca000 ebf8 66 1 ohci (USB OpenHCI Driver 1.23)
104 781579c6 c03 176 1 inst_sync (instance binding syscall)
104 781579c6 c03 176 1 inst_sync (32-bit instance binding syscall
105 780d4c38 1538 4 1 namefs (filesystem for namefs)
106 7814c6d0 1a98 4 1 logindmux ( LOGIND MUX Driver)
110 780bf047 d70 14 1 iwscn (Workstation Redirection driver )
111 7804d698 a4f 17 1 consms (Mouse Driver for Sun 'consms' 5)
113 780b6bbb 9f7 21 1 log (streams log driver)
114 780b734a 8f3 22 1 sy (Indirect driver for tty 'sy')
115 780c8b56 cc4 23 1 ptm (Master streams driver 'ptm')
116 10342e11 dc6 24 1 pts (Slave Stream Pseudo Terminal dr)
117 780c5670 a8c 31 1 seeprom (I2C serial EEPROM device driver)
120 1030a1c5 6a30 - 1 fctl (Sun FC Transport Library v1.12)
123 780c411c 17ec 34 1 smbus (SMBUS nexus Driver 1.6)
124 10308a8f 1dea 35 1 random (random number device v1.1)
125 780e0000 2290 17 1 authsha1 (SHA1-HMAC algorithm)
127 780b2637 1f01 38 1 openeepr (OPENPROM/NVRAM Driver v1.7)
131 78188000 30bc0 - 1 s1394 (IEEE 1394 Services Library 1.0)
143 10355a75 2e1f - 1 hidparser (HID PARSER 1.5)
146 103256b4 2d2e 60 1 fssnap (snapshot driver)
153 781af8c7 820 72 1 ksyms (kernel symbols driver)
156 10345623 2d73 - 1 usba10_hidparser (USBA10 HID PARSER 1.1)
161 780e2467 1a23 81 1 winlock (Winlock Driver v1.43)
162 10317889 14ed - 1 seg_drv (Segment Device Driver v1.1)
165 1030f375 2268 - 1 diaudio (Generic Audio)
167 1032811a 19cc 89 1 lockstat (Lock Statistics)
168 78215406 d1e 90 1 kstat (kernel statistics driver)
169 780e6000 5d08 91 1 vol (Volume Management Driver, 1.87)
170 780de000 1664 95 1 cpc (cpc sampling driver v1.8)
170 780de000 1664 179 1 cpc (cpc sampling system call)
170 780de000 1664 179 1 cpc (32-bit cpc sampling system call)
172 78259747 ba0 103 1 qec (QEC driver v1.32)
175 10347bee 4197 107 1 llc1 (LLC Class 1 Driver)
177 780ec000 4c5e - 1 amsrc1 (Audio Sample Rate Conv. #1 1.2)
178 780f2000 23ee - 1 audiosup (Audio Device Support 1.9)
179 780f6000 14f6e - 1 mixer (Audio Mixer 1.41)
182 1030331b 4edc 114 1 tnf (kernel probes driver 1.48)
184 7816a000 b3ec 150 1 fcp (Sun FCP Pseudo Driver v1.11)
185 1034b93d 4cd6 127 1 pm (power management driver v1.95)
186 780598aa 846 128 1 tod (tod driver 1.0)
189 780f0baf 1420 138 1 poll (Dev Poll driver)
190 780f4176 1ecf 147 1 lofi (loopback file driver (1.2))
193 78142000 499d - 1 pcihp (PCI nexus hotplug support v1.31)
194 78146605 1ae7 - 1 busra (Bus Resource Allocator (BUSRA) )
195 780df02c c4c - 1 hpcsvc (hot-plug controller services v1)
196 78148000 4fe8 - 1 pcicfg (PCI configurator v1.38)
203 781567ae bb1f - 1 amsrc2 (Audio Sample Rate Conv. #2 1.1)
214 1034f79b 4805 187 1 sppp (PPP 4.0 mux v1.3)
215 780da000 3ae0 18 1 sppptun (PPP 4.0 tunnel module v1.2)
215 780da000 3ae0 188 1 sppptun (PPP 4.0 tunnel driver v1.2)
218 781f0000 b5c0 191 1 rsm (Remote Shared Memory Driver 1.6)
219 7804dd6f 2e8 - 1 ipc (common ipc code)
220 780c95b2 aac - 1 rsmops (RSMOPS module 1.1)
221 781fb0b0 b33 198 1 rmcadm (rmcadm control driver v1.1)
222 78174f30 fec 200 1 pca9556 (pca9556 device driver v1.2)
231 10329430 1069 214 1 fcode (FCode driver 1.8)
232 1032a2c1 29ec - 1 fcodem (FCode framework 1.13)
245 78104000 4819 242 1 kb_ps2 (PS/2 Keyboard 1.31, 01/05/09)
250 781ba000 267e7 250 1 llc2 (SUN LLC2 Class II Streams Drive)
253 78108000 1bcaa - 1 pcmcia (PCMCIA Nexus Support)
264 781b2000 304c 263 1 ipdcm (IP/Dialup v1.9)
265 7814dd68 40a 264 1 ipdptp (IP/Dialup ptp interface v1.9)
266 7825bd1b 407 265 1 ipd (IP/Dialup mtp interface v1.9)
268 7826a000 165b8 268 1 wrsmd (RSMPI DLPI 1.4 03/01/08)
269 7827c000 295e6 19 1 nca (NCA Streams module)
269 7827c000 295e6 269 1 nca (NCA Streams device 1.2)
270 1032c3f5 15cc 15 1 mntfs (mount information file system)
271 78210000 159d2 11 1 tmpfs (filesystem for tmpfs)
272 78228000 2aa20 106 1 nfs (NFS syscall, client, and common)
272 78228000 2aa20 106 1 nfs (NFS syscall, client, and common)
272 78228000 2aa20 16 1 nfs (network filesystem)
272 78228000 2aa20 7 1 nfs (network filesystem version 2)
272 78228000 2aa20 17 1 nfs (network filesystem version 3)
273 78254000 4d9b - 1 rpcsec (kernel RPC security module.)
274 7825a000 1dc1 - 1 tlimod (KTLI misc module)
275 7825c000 860f - 1 klmmod (lock mgr common module)
276 78264000 65e3 18 1 autofs (filesystem for autofs)
277 10357fa4 109 2 1 IA (interactive scheduling class)
278 78258a03 f40 3 1 RT (realtime scheduling class)
279 102a70e1 28c - 1 RT_DPTBL (realtime dispatch table)
280 103406c9 2878 53 1 semsys (System V semaphore facility)
280 103406c9 2878 53 1 semsys (32-bit System V semaphore facil)
281 103064bf 26f8 52 1 shmsys (System V shared memory)
281 103064bf 26f8 52 1 shmsys (32-bit System V shared memory)
282 102186fd cf0 207 1 pset (processor sets)
282 102186fd cf0 207 1 pset (32-bit pset(2) syscall)
283 102ff5cc 3d82 178 1 kaio (kernel Async I/O)
283 102ff5cc 3d82 178 1 kaio (kernel Async I/O for 32 bit com)
284 780a8a5e 1687 20 1 ptem (pty hardware emulator)
285 781b482c 19d2 21 1 telmod (telnet module)
[root@vbsmf /kernel/drv] $vi st.conf
# Copyright (c) 1995-2000 by Sun Microsystems, Inc.
# All rights reserved.
#pragma ident "@(#)st.conf 1.27 00/08/29 SMI"
# This file contains configuration entries for both officially supported
# devices of Sun Microsystems and many 3rd party devices.
# The officially supported devices are :
# "ARCHIVE Python 28388"
# "ARCHIVE Python 28454"
# "ARCHIVE Python 29279"
# "ARCHIVE VIPER 150"
# "EXABYTE EXB-8200"
# "EXABYTE EXB-8500"
# "EXABYTE EXB-8505"
# "EXABYTE EXB-8900"
# "HP 88780"
# "HP C5683A" Note 1
# "HP C5713A" Note 1
# "Quantum DLT4000"
# "Quantum DLT7000"
# "Quantum DLT8000" Note 1
# "STK 9840" Note 1
# "SUN DLT4000"
# "SUN DLT4700"
# "SUN DLT7000"
# "TANDBERG SLR5"
# "TANDBERG TDC 4200"
# "TANDBERGMLR1"
# "TANDBERGMLR3"
# Notes
# 1 Drive is configured automatically - no entry is needed in st.conf.
# The 3rd party devices do apparently work with the configurations listed.
# All the entries have been taken from the net and probably have worked in
# the past, but have not been tested by Sun Microsystems. Use these entries
# as your starting point for generating your configuration entries.
#tape-config-list=
# "Emulex MTO2", "Emulex MT02 QIC-11/QIC-24", "MT02",
# "ANRITSU DMT2120", "Unisys 1/2\" Reel", "ANRITSU",
# "ARCHIVE Python 28454","Archive Python 4mm Helical Scan","ARCH_Python",
# "ARCHIVE Python 29279", "Archive Python 4mm DAT Stacker","ARCH_Python",
# "ARCHIVE Python 28388", "Archive/Conner CTDX004 4mm DAT", "Conner2-DAT",
# "ARCHIVE VIPER 150", "Archive QIC-150", "QIC150",
# "ARCHIVE VIPER 255", "Archive QIC-525", "QIC150",
# "DEC DLT2", "DEC DLT", "DLT2",
# "DEC TZ87", "DEC DLT", "DLT2",
# "EXABYTE EXB-2501", "Exabyte EXB-2501 QIC", "EXB-2501",
# "EXABYTE EXB-4200c", "Exabyte 4mm Helical Scan","Exa4200c",
# "EXABYTE EXB-8200", "Exabyte EXB-8200 8mm Helical Scan","EXB-8200",
# "EXABYTE EXB-8500", "Exabyte EXB-8500 8mm Helical Scan","EXB-850X",
# "EXABYTE EXB-8505", "Exabyte EXB-8505 8mm Helical Scan","EXB-850X",
# "EXABYTE EXB8500C", "Exabyte 8500C 8mm Helical Scan", "EXB-850X",
# "EXABYTE EXB-8900", "Mammoth EXB-8900 8mm Helical Scan","EXB-8900",
# "FUJITSU M1016B M2483B","Fujitsu 1/2\" Cartridge", "Fujitsu_comp",
# "FUJITSU M248", "Fujitsu 1/2\" Cartridge", "Fujitsu_m248x",
# "HP 88780", "HP-88780 1/2\" Reel", "HP_half",
# "HP C1533A", "HP DDS2 4mm DAT loader", "HP_DAT",
# "HP C1553A ", "HP C1553A 4mm DAT", "HP_DAT",
# "HP C1537A", "HP DDS-3 4mm DAT ", "HP_DAT_3",
# "HP C1557A", "HP DDS-3 4mm DAT loader", "HP_DAT_3",
# "HP HP35470A", "HP 35470A 4mm DAT", "HP_DAT",
# "HP HP35480A", "HP 35480A 4mm DAT", "HP_DAT",
# "IBM 03490", "IBM 3490E 1/2\" Cartridge", "CLASS_3490",
# "IBM 9348", "STK 4220 1/2\" Cartridge", "C3490",
# "KENNEDY", "Kennedy 1/2\" Reel", "KENNEDY",
# "LMS", "CDC 1/2\" Cartridge", "LMS",
# "M4 DATA 123107 SCSI", "M4-Data 1/2\" Reel", "M4_DATA",
# "Metrum", "Metrum VHS Cartridge", "MetD",
# "QUANTUM DLT7000", "Quantum DLT7000", "DLT7k-data",
# "SUN DLT7000", "Sun DLT7000", "DLT7k-data",
# "Quantum DLT4000", "Quantum DLT4000", "DLT-data",
# "SUN DLT4000", "DLT4000", "DLT-data",
# "SUN DLT4700", "DLT4700 Library", "DLT-data",
# "R-BYTE RB100", "R-Byte Whozits", "DAT",
# "SONY SDT-5000", "SONY 4mm DAT", "DAT",
# "SONY SDT-5200", "SONY 4mm DAT", "DAT",
# "STK 9490", "STK 9490 1/2\" Cartridge", "CLASS_3490",
# "STK 4280", "STK 4280 1/2\" Cartridge", "C3490",
# "STK", "STK 1/2\" Cartridge", "CLASS_3490",
# "TANDBERG 4100", "Tandberg 4100 QIC", "TAND_4100_QIC",
# "TANDBERG 4200", "Tandberg 4200 QIC", "TAND_4200_QIC",
# "TANDBERG TDC 4200", "Tandberg QIC 2.5 Gig Tape Drive", "TANDB-2_5G",
# "TANDBERG SLR5", "Tandberg 8 Gig QIC", "TAND-8G-VAR",
# "TANDBERGMLR1", "Tandberg MLR1 QIC", "TANDBERG_MLR1",
# "TANDBERGMLR3", "Tandberg 50 Gig QIC", "TAND-50G-VAR",
# "TELEX", "STK 4220 1/2\" Cartridge", "C3490",
# "WANGTEK 51000 SCSI", "Wangtek 1.2GB QIC", "WtQIC",
# "WANGTEK 5150ES", "Wangtek QIC-150", "WANGTEK_QC150",
# "WANGTEK 5525ES SCSI", "Wangtek 525MB QIC", "WtQIC",
# "WANGTEK 6130-HS", "Wangtek 4mm Helical Scan", "WANGTEK_6130",
# "WangDAT Model 2600", "WangDAT 4mm DAT", "WangDAT",
# "WangDAT Model 3400", "WangDAT 4mm DAT", "WangDAT",
# "WangDAT", "Wang DAT 3.81 Helical Scan", "WangDAT",
# "\076\000", "Fujitsu 1/2\" Cartridge", "Fujitsu_half";
#ANRITSU = 1,0x25,0,0x41d,4,0x00,0x02,0x03,0x03,1;
#ARCH_Python= 1,0x2c,0,0xde39,4,0x00,0x8c,0x8c,0x8c,3;
#CLASS_3490 = 1,0x24,0,0x1c43d,1,0x00,0;
#C3490 = 1,0x24,0,0x1c43d,4,0x00,0x00,0x00,0x01,2;
#Conner2-DAT= 1,0x2c,0,0xde39,1,0x00,0;
#DAT = 1,0x34,0,0x0439,1,0x00,0;
#DLT2 = 1,0x38,0,0xd639,4,0x17,0x18,0x80,0x81,2;
#DLT-data = 1,0x38,0,0xD639,4,0x80,0x81,0x82,0x83,2;
#DLT7k-data = 1,0x38,0,0xD639,4,0x82,0x83,0x84,0x85,2;
#EXB-2501 = 1,0x28,1024,0x442,1,0x00,0;
#EXB-8200 = 1,0x28,0,0x8c79,1,0x00,0;
#EXB-850X = 1,0x29,0,0xce39,4,0x14,0x15,0x8c,0x8c,1;
#EXB-8900 = 1,0x29,0,0x19E39,4,0x27,0x27,0x27,0x27,3;
#Exa4200c = 1,0x34,0,0x1639,2,0x63,0x0,1;
#Fujitsu_comp = 1,0x21,0,0x18639,4,0x00,0x00,0x00,0x09,1;
#Fujitsu_half = 1,0x21,0,0x63b,1,0x00,0;
#Fujitsu_m248x = 1,0x21,0,0xc639,1,0x00,0;
#HP_DAT = 1,0x34,0,0x19679,1,0x0,0;
#HP_DAT_3 = 1,0x34,0,0x9639,4,0x00,0x8c,0x8c,0x8c,1;
#HP_half = 1,0x23,0,0x41d,4,0x01,0x02,0x03,0xc3,1;
#KENNEDY = 1,0x22,0,0x41d,4,0x01,0x02,0x03,0x03,1;
#LMS = 1,0x20,0,0x66b,1,0x00,0;
#M4_DATA = 1,0x27,0,0x49d,4,0x01,0x02,0x06,0x06,1;
#MT02 = 1,0x14,512,0x202,4,0x84,0x05,0x05,0x05,1;
#MetD = 1,0x36,0,0x1639,1,0x00,0;
#QIC150 = 1,0x15,512,0x642,1,0x00,0;
#TANDB-2_5G = 1,0x32,0,0xD67b,1,0x0,0;
#TAND-8G-VAR = 1,0x37,0,0x963b,4,0xA0,0xD0,0xD0,0xD0,3;
#TANDBERG_MLR1 = 1,0x32,512,0x463a,1,0x00,0;
#TAND-50G-VAR = 1,0x37,0,0x963b,4,0xA0,0xD0,0xD0,0xD0,3;
#TAND_4100_QIC = 1,0x32,512,0x463a,1,0x00,0;
#TAND_4200_QIC = 1,0x32,512,0x463a,1,0x00,0;
#WANGTEK_6130 = 1,0x2a,0,0x659,1,0x00,0;
#WANGTEK_QC150 = 1,0x16,512,0x642,1,0x00,0;
#WangDAT = 1,0x2b,0,0x659,1,0x00,0;
#WangDAT = 1,0x34,0,0x0679,1,0x00,0;
#WtQIC = 1,0x32,512,0x467a,1,0x00,0;
name="st" class="scsi"
target=0 lun=0;
name="st" class="scsi"
target=1 lun=0;
name="st" class="scsi"
target=2 lun=0;
name="st" class="scsi"
target=3 lun=0;
name="st" class="scsi"
target=4 lun=0;
name="st" class="scsi"
target=5 lun=0;
name="st" class="scsi"
target=6 lun=0;
# as your starting point for generating your configuration entries.
#tape-config-list=
# "Emulex MTO2", "Emulex MT02 QIC-11/QIC-24", "MT02",
# "ANRITSU DMT2120", "Unisys 1/2\" Reel", "ANRITSU",
# "ARCHIVE Python 28454","Archive Python 4mm Helical Scan","ARCH_Python",
# "ARCHIVE Python 29279", "Archive Python 4mm DAT Stacker","ARCH_Python",
# "ARCHIVE Python 28388", "Archive/Conner CTDX004 4mm DAT", "Conner2-DAT",
# "ARCHIVE VIPER 150", "Archive QIC-150", "QIC150",
# "ARCHIVE VIPER 255", "Archive QIC-525", "QIC150",
# "DEC DLT2", "DEC DLT", "DLT2",
# "DEC TZ87", "DEC DLT", "DLT2",
# "EXABYTE EXB-2501", "Exabyte EXB-2501 QIC", "EXB-2501",
# "EXABYTE EXB-4200c", "Exabyte 4mm Helical Scan","Exa4200c",
# "EXABYTE EXB-8200", "Exabyte EXB-8200 8mm Helical Scan","EXB-8200",
# "EXABYTE EXB-8500", "Exabyte EXB-8500 8mm Helical Scan","EXB-850X",
# "EXABYTE EXB-8505", "Exabyte EXB-8505 8mm Helical Scan","EXB-850X",
# "EXABYTE EXB8500C", "Exabyte 8500C 8mm Helical Scan", "EXB-850X",
# "EXABYTE EXB-8900", "Mammoth EXB-8900 8mm Helical Scan","EXB-8900",
# "FUJITSU M1016B M2483B","Fujitsu 1/2\" Cartridge", "Fujitsu_comp",
# "FUJITSU M248", "Fujitsu 1/2\" Cartridge", "Fujitsu_m248x",
# "HP 88780", "HP-88780 1/2\" Reel", "HP_half",
# "HP C1533A", "HP DDS2 4mm DAT loader", "HP_DAT",
# "HP C1553A ", "HP C1553A 4mm DAT", "HP_DAT",
# "HP C1537A", "HP DDS-3 4mm DAT ", "HP_DAT_3",
# "HP C1557A", "HP DDS-3 4mm DAT loader", "HP_DAT_3",
# "HP HP35470A", "HP 35470A 4mm DAT", "HP_DAT",
# "HP HP35480A", "HP 35480A 4mm DAT", "HP_DAT",
# "IBM 03490", "IBM 3490E 1/2\" Cartridge", "CLASS_3490",
# "IBM 9348", "STK 4220 1/2\" Cartridge", "C3490",
# "KENNEDY", "Kennedy 1/2\" Reel", "KENNEDY",
# "LMS", "CDC 1/2\" Cartridge", "LMS",
# "M4 DATA 123107 SCSI", "M4-Data 1/2\" Reel", "M4_DATA",
# "Metrum", "Metrum VHS Cartridge", "MetD",
# "QUANTUM DLT7000", "Quantum DLT7000", "DLT7k-data",
# "SUN DLT7000", "Sun DLT7000", "DLT7k-data",
# "Quantum DLT4000", "Quantum DLT4000", "DLT-data",
# "SUN DLT4000", "DLT4000", "DLT-data",
# "SUN DLT4700", "DLT4700 Library", "DLT-data",
# "R-BYTE RB100", "R-Byte Whozits", "DAT",
# "SONY SDT-5000", "SONY 4mm DAT", "DAT",
# "SONY SDT-5200", "SONY 4mm DAT", "DAT",
# "STK 9490", "STK 9490 1/2\" Cartridge", "CLASS_3490",
# "STK 4280", "STK 4280 1/2\" Cartridge", "C3490",
# "STK", "STK 1/2\" Cartridge", "CLASS_3490",
# "TANDBERG 4100", "Tandberg 4100 QIC", "TAND_4100_QIC",
# "TANDBERG 4200", "Tandberg 4200 QIC", "TAND_4200_QIC",
# "TANDBERG TDC 4200", "Tandberg QIC 2.5 Gig Tape Drive", "TANDB-2_5G",
# "TANDBERG SLR5", "Tandberg 8 Gig QIC", "TAND-8G-VAR",
# "TANDBERGMLR1", "Tandberg MLR1 QIC", "TANDBERG_MLR1",
# "TANDBERGMLR3", "Tandberg 50 Gig QIC", "TAND-50G-VAR",
# "TELEX", "STK 4220 1/2\" Cartridge", "C3490",
# "WANGTEK 51000 SCSI", "Wangtek 1.2GB QIC", "WtQIC",
# "WANGTEK 5150ES", "Wangtek QIC-150", "WANGTEK_QC150",
# "WANGTEK 5525ES SCSI", "Wangtek 525MB QIC", "WtQIC",
# "WANGTEK 6130-HS", "Wangtek 4mm Helical Scan", "WANGTEK_6130",
# "WangDAT Model 2600", "WangDAT 4mm DAT", "WangDAT",
# "WangDAT Model 3400", "WangDAT 4mm DAT", "WangDAT",
# "WangDAT", "Wang DAT 3.81 Helical Scan", "WangDAT",
# "\076\000", "Fujitsu 1/2\" Cartridge", "Fujitsu_half";
#ANRITSU = 1,0x25,0,0x41d,4,0x00,0x02,0x03,0x03,1;
#ARCH_Python= 1,0x2c,0,0xde39,4,0x00,0x8c,0x8c,0x8c,3;
#CLASS_3490 = 1,0x24,0,0x1c43d,1,0x00,0;
#C3490 = 1,0x24,0,0x1c43d,4,0x00,0x00,0x00,0x01,2;
#Conner2-DAT= 1,0x2c,0,0xde39,1,0x00,0;
#DAT = 1,0x34,0,0x0439,1,0x00,0;
#DLT2 = 1,0x38,0,0xd639,4,0x17,0x18,0x80,0x81,2;
#DLT-data = 1,0x38,0,0xD639,4,0x80,0x81,0x82,0x83,2;
#DLT7k-data = 1,0x38,0,0xD639,4,0x82,0x83,0x84,0x85,2;
#EXB-2501 = 1,0x28,1024,0x442,1,0x00,0;
#EXB-8200 = 1,0x28,0,0x8c79,1,0x00,0;
#EXB-850X = 1,0x29,0,0xce39,4,0x14,0x15,0x8c,0x8c,1;
#EXB-8900 = 1,0x29,0,0x19E39,4,0x27,0x27,0x27,0x27,3;
#Exa4200c = 1,0x34,0,0x1639,2,0x63,0x0,1;
#Fujitsu_comp = 1,0x21,0,0x18639,4,0x00,0x00,0x00,0x09,1;
#Fujitsu_half = 1,0x21,0,0x63b,1,0x00,0;
#Fujitsu_m248x = 1,0x21,0,0xc639,1,0x00,0;
#HP_DAT = 1,0x34,0,0x19679,1,0x0,0;
#HP_DAT_3 = 1,0x34,0,0x9639,4,0x00,0x8c,0x8c,0x8c,1;
#HP_half = 1,0x23,0,0x41d,4,0x01,0x02,0x03,0xc3,1;
#KENNEDY = 1,0x22,0,0x41d,4,0x01,0x02,0x03,0x03,1;
#LMS = 1,0x20,0,0x66b,1,0x00,0;
#M4_DATA = 1,0x27,0,0x49d,4,0x01,0x02,0x06,0x06,1;
#MT02 = 1,0x14,512,0x202,4,0x84,0x05,0x05,0x05,1;
#MetD = 1,0x36,0,0x1639,1,0x00,0;
#QIC150 = 1,0x15,512,0x642,1,0x00,0;
#TANDB-2_5G = 1,0x32,0,0xD67b,1,0x0,0;
#TAND-8G-VAR = 1,0x37,0,0x963b,4,0xA0,0xD0,0xD0,0xD0,3;
#TANDBERG_MLR1 = 1,0x32,512,0x463a,1,0x00,0;
#TAND-50G-VAR = 1,0x37,0,0x963b,4,0xA0,0xD0,0xD0,0xD0,3;
#TAND_4100_QIC = 1,0x32,512,0x463a,1,0x00,0;
#TAND_4200_QIC = 1,0x32,512,0x463a,1,0x00,0;
#WANGTEK_6130 = 1,0x2a,0,0x659,1,0x00,0;
#WANGTEK_QC150 = 1,0x16,512,0x642,1,0x00,0;
#WangDAT = 1,0x2b,0,0x659,1,0x00,0;
#WangDAT = 1,0x34,0,0x0679,1,0x00,0;
#WtQIC = 1,0x32,512,0x467a,1,0x00,0;
name="st" class="scsi"
target=0 lun=0;
name="st" class="scsi"
target=1 lun=0;
name="st" class="scsi"
target=2 lun=0;
name="st" class="scsi"
target=3 lun=0;
name="st" class="scsi"
target=4 lun=0;
name="st" class="scsi"
target=5 lun=0;
nam

Sorry Simon, but I had to jump in on that.
You are correct that they'll need to probe from OBP, however...
jumping down from an active OS will leave much in various bus registers and they'll lock up the entire system when a probe is done that way. They'll have to power-cycle the chassis to recover.
Vassilios,
When you have the chance for testing this system, bring the chassis down to the OBP level. ( init 0 is acceptable ) then do:
OK setenv auto-boot? false <enter>
OK reset-all <enter>
The chassis will cycle and automatically stop at the OK prompt, with empty bus registers, and you can probe all you wish.
The peripheral MUST be seen at the hardware level before an OS can dream of manipulating it.
But, if I may ask...
You attached the tape peripheral to where?
(the integrated onboard SCSI connector or to an add-on card?)
Is it a Single-Ended SCSI device, a HVD SCSI device, or a LVD SCSI device?
If your cable is attached to an appropriate add-on card, do you need to install any packages for that card?

I am getting the error "Unable to connect to data warehouse management server" when I try to register it DWMS

I have a Data Warehouse Server that appears to be functioning but is running System Center Service Manager 2010 (w/ out SP1), Also have a functioning Configuration Management Server with Reporting Services Point installed the is running System Center
2012. Both systems are VM's running Windows Server 2008 R2 Enterprise w/ SP1 fully patched. Both systems are running SQL Server 2008 R2 as well. When I try to register the Data Warehouse Server via the GUI using the console or in Powershell it errors
out. Particularly on the GUI with the error "Unable to connect to data warehouse management server". I can browse to it, ping it, get the configuration management reports to run and show my AD assets, etc... but it will not register the DWS. I have
tried every suggestion TechNet has to offer and I am hitting a wall. Can someone please, please, please help!?!

unplug modem and router and reboot.
check setting for network, verify password.
sign in. Enter computer information.
let me know if this works.

PLA Register up date

Similar Messages

Maybe you are looking for