Placa madre 638856-001.

Necesito placa madre paraNotebook HP pavilion G7 1167 DX : Me dijeron que deberia utilizar placa madre 638856-001.
Dónde puedo conseguirla en Argentina?

Please contact the following HP Partners in Argentina, to see if "HP part #638856-001" is available;
Latin Parts
tel: (11) 4544-2233
[email protected]
http://www.latinparts.com
Teknaria
tel: (11) 5173-8330
[email protected]
http://www.teknaria.com
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Por favor, póngase en contacto con los siguientes socios de HP en Argentina, para ver si la "HP parte # 638856-001" está disponible;
Piezas Latina
tel: (11) 4544-2233
[email protected]
http://www.latinparts.com
Teknaria
tel: (11) 5173-8330
[email protected]
http://www.teknaria.com
Si tiene alguna duda, por favor no dude en preguntar.
Por favor, haga clic en la estrella Kudos blanco para mostrar su agradecimiento
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

Placa madre Z400

Hola: Llevo casi un año buscando una placa madre para mi lenovo z400 pero en todos los servicios tecnicos autorizados por la marca me dicen que no la tienen y no llega a chile.
Por favor si alguien sabe como conseguirla seria de gran ayuda.

Please contact the following HP Partners in Argentina, to see if "HP part #638856-001" is available;
Latin Parts
tel: (11) 4544-2233
[email protected]
http://www.latinparts.com
Teknaria
tel: (11) 5173-8330
[email protected]
http://www.teknaria.com
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Por favor, póngase en contacto con los siguientes socios de HP en Argentina, para ver si la "HP parte # 638856-001" está disponible;
Piezas Latina
tel: (11) 4544-2233
[email protected]
http://www.latinparts.com
Teknaria
tel: (11) 5173-8330
[email protected]
http://www.teknaria.com
Si tiene alguna duda, por favor no dude en preguntar.
Por favor, haga clic en la estrella Kudos blanco para mostrar su agradecimiento
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Necesito una placa madre para lenovo s410p AYUDA

Hola a todos, necesito su ayuda, mi laptop no enciende, lo pongo a cargar y no carga ni prende el led de carga,
creo que mi placa madre se daño, alguien sabe que puedo hacer? donde consigo una placa igual a la de mi laptop y cuanto me costaria una nueva placa madre, soy de Perú
Los detalles de mi laptop es:
Lenovo IdeaPad S410p
Model Name: 20296
INPUT: 20v 2.25A
S/N: WB13718417 P/N: 59399719 Porfavor Agradeceria mucho su ayuda
Gracias !

Hola Antony gracias por responder,Si, ya descarte que sea el cargador o bateria, No lo he llevado a un tecnico aun, pero lo aré lo mas pronto, pero estoy seguro de que es la placa que esta dañado, y si eso de conseguir placa aqui esta dificil, que podria hacer?
Tratar de conseguir una placa en lima? si lo consigo, cuanto me costaria?
y si vendo mi laptop? crees que me lo compren? a cuanto lo deberia vender? el disco duro, memoria ram, pantalla, teclado, bateria y cargador, todo esta bien el problema es que se daño la placa
Gracias de todos modos !

Z77A-GD65 boot issue!

Hey.
I have this Z77A-GD65 motherboard which I bought around July 2012, which has been working great until this morning. First of all, I don't do any overclocking, It has no meaning to me and I didn't change anything on the BIOS, not even used it prior to this problem.
Problem is, PC won't post, It will turn on for 3-4 secs until reaching debug code 55 then it will simply shutdown and restart by itself, going into a cycle, just let me repeat, there is no BIOS, no post only black screen.
I tried switching Bios A and B, clearing data on both Bios A and B, replacing the Bios battery. I replaced the Core i5 3750K with a Core i7, I changed memory sticks, even replaced the 670 GTX card with a 660Ti card. Replaced my CoolerMaster PSU with a Corsair one and none of these changes helped.
I did this both inside the case and outside the case and gave the motherboard a good airblow to remove the little dust it had on it.
All the other component worked just fine in another PC.
So basically, I did every troubleshooting I know, It feels like a shortcut but I inspected the motherboard and it seems to be in good physical condition.
I think it needs a RMA, whats the best thing to do now?
Thx for any help!

You are in South America?
You could also just email [email protected] if you wished. Might be recommended if that is the case due to the nearest service center being in the USA. Unless they opened a new one recently.
Yup:
Quote
South American
MSI Computer do Brasil Ltda
Tel: (+5511) 4949-8888
Fax: (+5511) 4949 8808
Website:http://br.msi.com/
Sede Central de América Latina
Dirección: 901 Canada Court, City of Industry, CA 91748 U.S.A.
Tel: + 1-626-913-0828
Horario de Atencion :Lunes-Viernes (9:00AM - 6:00PM PST)
Para enviarnos un e-mail, por favor diríjase a alguna de las siguientes direcciones:
Departamento de Placas Madre, Tarjetas de Video & AIl-in-One PC
Ventas: [email protected]
Marketing: [email protected]
Departamento de Notebook PC y Tablet
Tel: + 1-305-591-2229
E-mail: [email protected]
Centros de Servicio Autorizados para Notebooks en Latinoamérica
Por favor ir a la página de Servicio y Soporte en la Sección de Centros de Servicio.
Departamento de Soporte Técnico RMA(toda linea de productos)
RMA: [email protected] o marcando 1-305-591-2229 (opcion 5)
Soporte técnico: [email protected] o marcando 1-305-591-2229 (opcion 5)
FAX:
Soporte Técnico & RMA : +1-626-581-1551
Ventas & Marketing: +1-626-913-0818
Departamento de RR.HH. : +1-626-913-0819
Departamento Contable: +1-626-913-0897

Error at the time of Sales Pricing.

Hi All,
My WBS is :
Level 1 PS.001
Level 2 PS.001.1 & PS.001.2
I am doing unit costing through CJ40 where i select wbse PS.001.1(supply of materials) and plan the cost for different materials going to be used in the project. Similarly i select PS.001.2 ( Erection work) and do the cost planning for services. Now i create an inquiry where i assign the top level wbse i.e PS.001 to inquiry item and also assign the DIP profile to both inquiry and project. Now, when i put top level WBS element PS.001 on selection screen of DP81,system gives an error "NO expenditure item found". But at the sametime if in place of PS.001 i assign to inquiry PS.001.1 or PS.001.2 and put PS.001.1 or PS.001.2 on selection screen, system doesn't give any error.
So, i just want to know that whether system is behaving correctly ?. Because what i have learnt from different documents and sources we always assign the top level wbse to inquiry item.
Thanks.

Hi,
It is not necessary to attach only the top level WBSE.
Conceptually the WBSE which carries the cost plan / which is responsible for execution .... should be responsible for the delivery & billing & to carry revenue.
regards

Problem during Post Installation in PI 7.1

Dear All,
While doing post installation steps in PI 7.1 Server all the configurations are taking place in client 001 though we have done the client copy from 001 to 200. All the user id etc are getting created in client 001 only. I have changed the client id in RFC "I18NBackendConnection" and "UMEBackendConnection" in http://<host>:<hport>/nwa then also its taking 001 client only.
Please guide me on how to do the configurations so that everything is done in 200 client.
Regards,
NJ

Nishu,
AYou could have resolved this isuue by running the client copy (SAP note - 1115280) before running the config wizard.
You have rerun the
client copy step - follow the SAP note 1115280 as is.
and you will be fine... I think you may have to manually change the clients in the Java stack - Jco connection and RFC destination.
regards,
Arvind R

Problem with 694T

Hi, I have instaled a PIII 1Ghz. in a motherboard 694T, with kingston memory and a trident AGP video card.
The problem is that it never boot when pass the info screen.
The D-Leds was in RED Green Green Green, so in the manual say this:
Boot Attempt
- This will set low stack and boot via INT 19h.
I don't know what this mean or how I could fix it.
Could someone help me?
Thants a lot and I'm sorry for my bad bad english!.
Dario Caamaño From Argentina.

Yeeepeeeeeeeee!!!!
The problem WAS:
(i don't know how to explain it in english :-P )
In spanish / en español...
Los pines (pins) marcados en el dibujo estaban haciendo contacto, seguramente cuando instalé el procesador rayé ese componente con el clip de sujeción del disipador e hice que las soldaduras se junten... lo que hice para repararlo fue remover la soldadura que unía los pins con una aguja... y magia
Me costó mucho encontrar esa falla, estuve como 3 horas mirando la placa madre con una lupa -_-
Yaaaa, chaaaaoooo

HOW TO USE "WITH" STATEMENT IN MESSAGES

MESSAGE e001 WITH WERKS SY-REPID
TELL ME HOW TO USE "WITH" IN MESSAGES SEND SYANTAX AND EXAMPLE CODE

Messages e001(zz) with Var1 var2 var3.
For this statement to be valie, the variables var1 var2 var3 should be defined alrteady in the program.
and in se91, you should define a message class (Say ZZ ).
In that message class you can create a message with number (Say 001) with place holders (&).
001: & is a sampele message for & hgh & hjknkn
The & will get replaced by the variables var1 var2 var3 in the run time.
YOu can also create success messages if yo say:
Messages S001(zz) with Var1 var2 var3.
Information
Messages I001(zz) with Var1 var2 var3.
Warning:
Messages W001(zz) with Var1 var2 var3.
Abend:
Messages a001(zz) with Var1 var2 var3.
REFER sample programs : DEMO_MESSAGES
DEMO_MESSAGES_SIMPLE
Regards,
Ravi
Message was edited by:
Ravi Kanth Talagana

WM:TO after GR

Hi Gurus,
I have done the basic configurations for WM as follows,
I have assigned the Warehouse number for Plant and Storage loc and maintained Warehouse views in
the material master.
Now, while doing GR,WM tab has appeared.I have posted GR also.
Stock has increased in the Storage loc level.
TR also created in the background.I want to create a TO for this TR in LT06 tcode.
The system throws a message "no destination storage bin to be found in storage type 001.
I checked in the search log in the Environment,it says,
Stock placement storage type 001 Putaway strategy L Empty bin
Section 001   Bin type E1   Search unsuccessful
Section 001   Bin type E2   Search unsuccessful
Section 001   Bin type P1   Search unsuccessful
Section 002   Bin type E1   Search unsuccessful
Section 002   Bin type E2   Search unsuccessful
Section 002   Bin type P1   Search unsuccessful
I am missing some configuration.
Kindly guide me.Points for sure .
Thanks

Hi,
Please go in LS10 & select your storage type for display. After displaying storage types go in environment tab & select options "Create bins".
It seems bins are not created. Create the bins & save. Test again the scenario.
Why are you using LT06 to create TO? Please use LB11 to select your TR & process then for TO.
LT06 is for creating TO from material document.
Regards,
Prashant

Help with the ABAP code

Hi "Friends",
I have small problem, but i don't know how to solve it.
I changed an old program which had just executable report function. The display was written with "WRITE" sentence.
here is the code:
           WRITE: / OUTPUT-MATKL(4), '|',
                   T023T-WGBEZ, '|',
                  AT 30 OUTPUT-MATNR+12(6), '|',
                  AT 39 OUTPUT-MAKTX, '|',
                  AT 90 OUTPUT-LABST, '|',
                  AT 110 OUTPUT-OMENG, '|',
                  AT 135 OUTPUT-BMENG, '|',
                  AT 165 VERFUEGBAR, '|'.
How can I set in new code that the columns will start at the same point?
New code:
FORM BUILD_LINE USING IW_DATA.                             "$001 start
FIELD-SYMBOLS: <L_VALUE>,                                 "$001
                 <L_DATUM_EX>.                              "$001
DATA: L_LEN TYPE I.                                       "$001
DATA: L_STRLEN TYPE I.                                    "$001
DATA: L_TYPE.                                             "$001
DATA: H_DATE_EXTERNAL(10) TYPE C.                         "$001
CLEAR: G_TRANSFER.                                        "$001
REFRESH: GTW_FIELDS.                                     "$001
APP_NAME 'MATKL'.
APP_NAME 'WGBEZ'.
APP_NAME 'MATNR'.
APP_NAME 'MAKTX'.
APP_NAME 'LABST'.
APP_NAME 'OMENG'.
APP_NAME 'BMENG'.
APP_NAME 'VERFUEGBAR'.
And my question is how to set in new code that the A column starts AT 30, second AT 90.... How to set this?
I put the AT 30 infront of the APP_NAME, but doesn't work!! Please help.
Thanks for the help,
<b><REMOVED BY MODERATOR></b>... and it is urgent )
BR
saso
Message was edited by: Saso
        Saso Poljansek
Message was edited by:
        Alvaro Tejada Galindo

Uf, but I would like to write on unix file now and this write is'n possible anymore...
Here is the code I need to change... At this piece of code i need to change that the columns will be a the same place as was before when I used write sentance... There is another external program behind and I need to have the same structure as I have before....
*&      Form build_line
      text
     -->P_I_DATA text
FORM BUILD_LINE USING IW_DATA.                             "$001 start
FIELD-SYMBOLS: <L_VALUE>,                                 "$001
                 <L_DATUM_EX>.                              "$001
DATA: L_LEN TYPE I.                                       "$001
DATA: L_STRLEN TYPE I.                                    "$001
DATA: L_TYPE.                                             "$001
DATA: H_DATE_EXTERNAL(10) TYPE C.                         "$001
CLEAR: G_TRANSFER.                                        "$001
REFRESH: GTW_FIELDS.                                     "$001
APP_NAME 'MATKL'.                                         "$001
*****************write also this from the customizing table
APP_NAME 'WGBEZ'.                                         "$001
APP_NAME 'MATNR'.                                         "$001
APP_NAME 'MAKTX'.                                         "$001
APP_NAME 'LABST'.                                         "$001
APP_NAME 'OMENG'.                                         "$001
APP_NAME 'BMENG'.                                         "$001
*****************write also this from the customizing table
APP_NAME 'VERFUEGBAR'.                                    "$001
LOOP AT GTW_FIELDS.                                       "$001
    CLEAR SY-SUBRC.                                         "$001
    ASSIGN COMPONENT GTW_FIELDS-NAME OF STRUCTURE IW_DATA   "$001
                                            TO <L_VALUE>.   "$001
    CHECK SY-SUBRC = 0.                                     "$001
    DESCRIBE FIELD <L_VALUE> OUTPUT-LENGTH L_LEN.           "$001
    DESCRIBE FIELD <L_VALUE> TYPE L_TYPE.                   "$001
    CASE L_TYPE.                                            "$001
      WHEN 'D'.                                             "$001
        CLEAR: H_DATE_EXTERNAL.                             "$001
        ASSIGN H_DATE_EXTERNAL TO <L_DATUM_EX>.             "$001
        CALL 'DATE_CONV_INT_TO_EXT'                         "$001
          ID 'DATINT' FIELD <L_VALUE>                       "$001
          ID 'DATEXT' FIELD <L_DATUM_EX>.                   "$001
        UNASSIGN: <L_VALUE>.                                "$001
        ASSIGN <L_DATUM_EX> TO <L_VALUE>.                   "$001
    ENDCASE.                                                "$001
    L_STRLEN = STRLEN( G_TRANSFER ).                        "$001
    WRITE <L_VALUE> TO G_TRANSFER+L_STRLEN(L_LEN).          "$001
    L_STRLEN = L_STRLEN + L_LEN.                            "$001
    WRITE '|' TO G_TRANSFER+L_STRLEN.                       "$001
    AT LAST.                                                "$001
      SHIFT G_TRANSFER BY 1 PLACES RIGHT.                   "$001
      WRITE '|' TO G_TRANSFER+0(1).                         "$001
    ENDAT.                                                  "$001
    CLEAR: L_STRLEN.                                        "$001
ENDLOOP.                                                  "$001
ENDFORM.                    " build_line                    "$001 end

No enciende mi lenovo s205

Buenas tardes comunidad, quisiera que me pudieran ayudar con mi problema mi equipo es un idealpad S205 , lo mande a formatear y el tecnico que intalo el sistema operativo actualizo la bios del equipo porque no le tomaba el bluetooth, ahora a causa de eso mi equipo no enciende prende los botones de encendido pero no arranca ni da imagen,el tecnico no se responsabilizo de lo ocurrido y me lo entrego asi, ojala pudieran orientarme en el tema para no comprar una nueva placa o un nuevo equipo. un saludos para todos,gracias

Buen día,
Bienvenido al Foro.
En este caso debes remplazar la placa madre te proporciono el numero de parte para que la puedas comprar.
LS205 MB E350 1.6G W/THM/FAN/3G/HDMI 11013356
Espero sea de mucha ayuda esta recomendación y a la espera de comentarios

Inserte una micro sd a mi tablet A3300 y ahora no enciende

puse mi tarjeta SD en mi tablet apagada y la encendi todo bien hasta ahi, pero me decia que habia un error por lo cual decidí apagarla y desde ahi no ha encendido mas intente resetearla pero no funciona y conectandola al PC tampoco, tampoco es falta de carga se apago con un 72% de carga.....
si alguien pudiese ayuudarme se los agradeceria......

Buen día,
Bienvenido al Foro.
En este caso debes remplazar la placa madre te proporciono el numero de parte para que la puedas comprar.
LS205 MB E350 1.6G W/THM/FAN/3G/HDMI 11013356
Espero sea de mucha ayuda esta recomendación y a la espera de comentarios

Ya no enciende mi display

Mi display ya no enciende

Buen día,
Bienvenido al Foro.
En este caso debes remplazar la placa madre te proporciono el numero de parte para que la puedas comprar.
LS205 MB E350 1.6G W/THM/FAN/3G/HDMI 11013356
Espero sea de mucha ayuda esta recomendación y a la espera de comentarios

PUEDO CAMBIAR EL PROCESADOR DE MI LAPTOP

Hola, quisiera saber si pudeo cambiar el procesador de mi laptop G480 y si se pudiera cuales serian compatibles con mi placa madre. Tengo un socket 988b rpga.. Espero respuestas

Buen dia,
Te anexo el manual de servicio en el cual te dice que elementos puedes reemplazar del equipo.
https://download.lenovo.com/consumer/mobiles_pub/lenovo_g480_g485_g580_g585_g780_hmm_v1.0_english.pdf
espero te sea de mucha utilidad

Consulta - Tarjeta de Video

Hola!
Tengo esta Pc!
I5 2400
Mother P8H61-M LX
Ram 4Gbx2 Corsair Vengance
GeForce GT 520
Y quiero actualizarla, porque para el uso que le doy me quedo muy corta, que me convendría mejorar...
Placa o Procesador?
* Usualmente uso Ps, Ai, Ae, Pr y C4D...

Bueno no queda muy claro lo del título Tarjeta de vídeo y debajo preguntas elegir entre placa y procesador. Si por placa te refieres a ala placa madre o base (motherboard) te diré que es probable que debierás cambiarla junto al procesador en el sentido que las actuales placas, mas modernas que una con chipset H61 utilizan un zócalo de 1150 pines en lugar de los 1155 de la tuya. La placa base por si sólo no cambia mucho las prestaciones.
Si te refieres a la tarjeta gráfica que tienes, GT 520, una más moderna y potente puede mejorar algo el rendimiento gráfico, pero no la potencia de calculo de operaciones que no sean realizadas por la tarjeta gráfica.
lo que veo es que sólo tiens 8GB de memoria, quizás 16Gb te fueron mejor, y el coste es relativamente pequeño.
El procesador no es muy potente (veo que tiene un PC Mark de 5800 cuando los i7 actuales andan por el doble o algo más. Los i7 utilizan hyperthreading que en algunas operaciones de PS se notan, de todas maneras un PCMark del doble no quiere decir que el equipo haga todo el doble de rápido, y lo que te decía, a lo mejor tienes que cambiar CPU y placa madre.
En fin, yo probaría primero con ampliar la memoria, y también miraría un disco principal y de arranque SSD, cual es que utilizas ahora?

Placa madre 638856-001​.

Similar Messages

Maybe you are looking for

Placa madre 638856-001.