Place my contacts list back to the right hand side of my e mail page
My contacts list in my e mail ,are no longer on the right hand side and visual when reading my mail. How can I put them back to the old system? PV3-571G OS system Windows 7 home Premium 64 bit.
Hi,
Firefox and other browsers only temporarily displays the contents. The actual content, settings etc. are stored at the email site. So you may have to change the email settings to display the contacts list on the left. The email support/forum would be helpful. On the other hand, if there is a display problem/error, you can reset Firefox and start afresh.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
If you would like to take a listing of the add-ons, changed preferences/settings etc. to quickly replicate the previous profile, please '''Copy all to clipboard''' (on the left of the reset button), and paste it into MS Office Excel, or OpenOffice/LibreOffice Calc, or notepad. However, it would be a good idea to check for the existence of the issue immediately after the reset.
Similar Messages
-
When transfering tracks to an ipod a sliding panel appears on the right hand side of itunes. This allows the selected track to be transfered. After registering this action the panel does not slide back out of the way to allow scrolling and more song selection. Any solutions..Help?
I have an even simpler method. I use MyPublisher to print my books. I select their page layout for a two-page spread, drag and drop the image. DONE! I understand that most people have their favorite places to have work done. I have been extremely pleased with MyPublisher.com, so I haven't even tried the book module in Lightroom.
-
How do i add a reminders list (to do list?) like there used to be on the right hand side of iCal?
Sorry - I linked the article for iOS Reminders. You are posting in the Mountain Lion forum, but you have listed the OS X for Snow Leopard. What OS X are you running?
Here is the support article for all devices and computers using Reminders:
iCloud: Calendar Events, Reminders, To Dos, and Tasks behavior differs by application - Apple Support
GB -
My email only display the list of mails in my in box with a preview of the first two lines of the body of the message. When one clicks on the message to open it, only the header is displayed in the right hand side of the screen - the actual message is missing. This happens on older mail previously downloaded that use to work properly as well. Any idea how to fix this?
Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
my iphone screen has gone white with a few grey lines down the right hand side.. Has anyone any idea how I can solve this and get my screen back to normal..? Thanks
Hi tag71,
If you are having issues with the display on your iPhone, you may find the Display portion of the following article helpful:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Regards,
- Brenden -
Downloaded the newest itunes, now I can no longer see the "cheap" movies listed on the links to the right hand side. Where did they go, and how do I now get to them? I tried search and that didn't work.
Are they gone completely from the computer, or just no longer in the library? Check your movie media folder.
If your'e in the USA you can download some movies a second time, but not all (studio dependent). You should always back up all media. -
Hello world.
Been using my mac book air on my 21.5 inch monitor via the moshi HDMI adapter..
I also use a logitec M235 mouse(just a normal USB wireless Mouse)..fot the last week i been trying to figure out whats wrong with it, since its laggin soo bad, and pretty much unuseable..it has its phases, it runs fine for 5mins and then goes back to the terrible lag, the computer is unusable, the mouse would just skip like half the screen whenever i tried to move it..its not the system thats lagging since my keyboard functions fine, its only the mouse that choppy and lagging
yesterday i swapped the usb port, and then it works fine..
the problem is only on the right had side USB port, can my USB be malfuncitoning, or is it a software issus, I also tried a different mosue, and the result is the same, terrible lag on the Right hand side USb port, and works fine on the Left hand side..
i tried moving the laptop somewhere else thinking it was some interference, still the same!!
what should I do. I also reset the SMC controller, and its still the same..
its just weired, and annoying. and my warranty expires in 3 weeks!!!
Help appriciated!!
model is 2012 macbook air, 8GB ram, i5 processor.. (also i have plenty of free ram and my processor usage is like 10%)Reset PRAM. http://support.apple.com/kb/PH4405
Try the suggestion in this article
http://support.apple.com/kb/TS1248
If this does not help, contact Apple.
Best. -
My network has not been working today. When I click on it it says "unable to access nhe network". My guest network will work. When I hit the blue arrow on the right hand side of my network there is no information in the IP address, subnet mask, router, etc. There is information in my guest section when I checked. I have unplugged and replugged my router and turned my Wifi button of and off, started and restarted my Ipod as per internet suggestions. Would anyone know how to get my network reactivated. I am nervous to hit reset network settings in case I lose all my music and icons, etc. added since I got my Ipod. Thank you for any assistance
Do other devices now connect?
Did the iPod connect before?
What encryption/security is the router using?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
For no apparent reason my Mac (2 GHz PowerPC G5) running 10.4.11 has put a mesh-like pattern over the folders on my desktop and also a band of the same pattern across the top of the screen and down the right-hand side over the dock. (See screen grabs below.)
It doesn't affect any operations but makes folder names and drop-down menus difficult to read through the pattern.
I'm not aware of changing any settings so suspect I must have clicked on something without noticing. How do I get rid of the overlaid pattern, please?Information about my computer is as follows:
Machine Name: iMac G5
Machine Model: PowerMac8,2
CPU Type: PowerPC G5 (3.1)
Number Of CPUs: 1
CPU Speed: 2 GHz
L2 Cache (per CPU): 512 KB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: 5.2.5f1
It looks like this at the back: -
Hp Color LaserJet CP2025n printing a yellow band down the right hand side,
I have a Hp Color LaserJet CP2025n running on a Desk top computer OS win 7 64bit, printer Serial Number [edited Serial Number by Moderator] and another number on the label CB494A, The printer has started printing a yellow band 1.5 cm wide all the way down the right hand side of the page, any ideas or suggestions much appriciated.
@T4011
Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP -
I can't find the toolbox on the right hand side of the editor. ANy ideas why??
I haven't seen this documented anywhere, and I can't replicate it for Administrator / Partner users of BC sites, but the toolbox does get closed (by default?) for some users in some circumstances.
To get it back, you'll need to click the 'Add Modules' button, which is on the page editor between the "Page Content" heading, and the WYSWIG editor window.
Pics: -
Change the address in the right hand side of purchase order form
Hi all,
I am new to forms and scripts. I have to modify the output of Purchase Order form/script such that the Ship to and Bill to address that they have now on top right corner must be modified with the address that I have.
How should i be doing this?
I found that they copied the program SAPFM06P into ZSAPFM06P and the form name is some thing called ZABC_PURCHASEORDER . Now I want to figure out how should i be changing the purchase order form so that the Ship to and Bill to address that they have now on top right corner must be modified with the address that I have.
the output type is named as ZNE7.
Some one please direct me how to figure out. i dont even know if it is a sap script or smart form.
also please help me in whihc places i should look to change the the Ship to and Bill to address that they have now on top right corner must be modified with the address that I have.
Regards,
Jessica SamOk karthik..i found that there is a windo called ship to where they have stored the following in Text Elements
HEADER_DELADDRESS
* <B> ABC Corporation </>
*DDRESS DELIVERY PARAGRAPH AS PRIORITY
* TITLE &SADR-NAME2&
* NAME &SADR-NAME1&, &SADR-NAME2&
* STREET &SADR-STRAS&
* CITY &SADR-ORT01&, &SADR-PSTLZ&
* POSTCODE &SADR-PSTLZ&
* REGION &SADR-REGIO&
* COUNTRTY &SADR-LAND1&
*ENDADDRESS
* FROMCOUNTRY &LFA1-LAND1&
* POSTCODE &SADR-PSTLZ&
* CITY &SADR-ORT02&, &SADR-ORT01&
* POSTCODE &SADR-PSTLZ&
* COUNTRY &SADR-LAND1&, &SADR-PSTLZ&
* REGION &SADR-REGIO&
* FROMCOUNTRY &LFA1-LAND1&
* ENDADDRESS
BILL TO:
ABC Corporation Inc,
6000 Street1
SUITE # 700, City1
Country1 789045
+1 (999) 999-9999(Phone)
(999) 999-9999(Fax)
* ABC Company "AS
* 5678 Street2 "AS
* CITY1, State1, 99999 " AS
* 999 999 9999 " AS
SHIP TO:
HEADER_DELADDRESS
* <B> ABC Corporation </>
*ADDRESS DELIVERY PARAGRAPH AS PRIORITY
* TITLE &SADR-ANRED&
* NAME &SADR-NAME1&, &SADR-NAME2&, &S
* STREET &SADR-STRAS&
* POBOX &SADR-PSTLZ&
* COUNTRY &SADR-LAND1&
* REGION &SADR-REGIO&
* FROMCOUNTRY &SADR-LAND1&
* ENDADDRESS
HEADER_DELADDRESS_3RDPARTY
BILL TO:
ABC Corporation Inc,
6000 Street1
SUITE # 700, City1
Country1 789045
+1 (999) 999-9999(Phone)
(999) 999-9999(Fax)
SHIP TO
*ADDRESS DELIVERY PARAGRAPH AS
ABC Corporation Inc,
6000 Street1
SUITE # 700, City1
Country1 789045
+1 (999) 999-9999(Phone)
(999) 999-9999(Fax)
BILL TO:
ABC Corporation Inc,
6000 Street1
SUITE # 700, City1
Country1 789045
+1 (999) 999-9999(Phone)
(999) 999-9999(Fax)
SHIP TO:
So to chjange the Bill to and Ship top address that appear in the right hand side top most corner of the purchase order, what should i be changing in the text elements of the PO?
please guide me..i am very new to sapscripts and i have to finish this task as soon as possible as this is a production support issue.
Will be waiting for some clues
Regards,
Jessica Sam -
How do I hide the right hand side menu thing in CS3?
What's the deal with the annoying new menu in CS3 on the right hand side taking up unnecessary space on my screen? how do I get rid of it? All I want is my layer and history pallette. All the rest I want to hide. And if I want to remove the tool bar, how do I do this? it doesn't have a close box anymore? Also every time I open a file now, it opens up with the black background as default. How do I go back to the old way where it just opens a window?
What's the deal with the annoying new menu in CS3 on the right hand side taking up unnecessary space on my screen?
how do I get rid of it? All I want is my layer and history pallette. All the rest I want to hide.
Click the very top part of each pallet and this minimizes everything in that pallet to the side. If you want to close the pallet altogether, be sure it is open and then click the "x" in the top right of that pallet.
And if I want to remove the tool bar, how do I do this? it doesn't have a close box anymore?
Don't think that can be done anymore.
Also every time I open a file now, it opens up with the black background as default. How do I go back to the old way where it just opens a window?
I'm guessing you need to hit the "F"key a few times (if this fixes it then it really isn't the "background" color that has changed). Otherwise you can change it here when opening a new file: -
I just installed Firefox 4. In the previous version you would open a new tab by clicking on the small "Open New Tab" button at the Right Hand Side of the Tabs. This button has now disappeared in my upgrade. Firefox help still says you can open a new Tab by using the "Open New Tab" Button so how do I get it back??
I got it back by going to "customize toolbar" and hitting "restore default set"! Now there is a small tab next to my open tabs with a "+" on it.
-
Shifting the Company Logo to the right hand side?
Hi Guys,
There is a requirement to put the Logo of the Company in the header on the Right Hand Side of the Self Service Page. The customer has already modified all the buttons.links etc.The last requirement was to shift the Company Logo to the right hand side.
Also there is a requirement to put the company on the Login Page.
Please suggest a suitable way to achieve this.
thanks a lot in advance.
regards,
HemHi Hem,
There is no standard functionality to move the company logo to right hand side.
But you can do a workaround,
Take a backup of your $COMMON_TOP/html/OA.jsp
add the following code
<img src="YourCompanyLogo.bmp" width="100%" height="100">
Under
<%@ page
language = "java"
contentType = "text/html"
errorPage = "OAErrorPage.jsp"
import = "oracle.apps.fnd.framework.webui.OAJSPHelper"
import = "oracle.apps.fnd.framework.webui.OAPageBean"
import = "oracle.apps.fnd.framework.webui.OAGenericDispatcher"
import = "oracle.cabo.ui.jsps.GenericEntry"
%>
YourCompanyLogo.bmp, should be in $COMMON_TOP/html,
But you can keep in $OA_MEDIA also, but you give the corresponding path.
goto your $COMMON_TOP/_pages/_oa__html/
remove the cache for OA.jsp, using
rm OA.
YourCompanyLogo.bmp should be an image which will have your company log in the right hand side.
And you can place a empty image for the standard image.
For changing the standard image, check this URL..
http://www.oracle.com/technology/tech/blaf/specs/branding.html
If you face any issues to do this please let me know.
Then bounce the apache.
Then check.
Thanks.
With Regards,
Kali.
OSSI.
Maybe you are looking for
-
Password no longer works in administrator account.
Did an Archive and Install upgrade to Leopard without a problem. All Apps seem to work OK. In Preferences/Accounts I am still listed as administrator, but when I try to shut down or do other administrator chores I get an invalid user or password erro
-
Good color monitor for use with FCP
I'm looking for a color monitor that has dvi and S video inputs.
-
INTEGRATION_DIRECTORY_HMI test - 500 Internal server error
When I test my RFC connection INTEGRATION_DIRECTORY_HMI, it is giving the following error. 500 - Internal Server Error Application error occurred during request processing. Details: Error [javax.servlet.ServletException: REQID not found]. Excepti
-
Hi All, The problem is basically when User clicks the Sortable column and choose its descending order and then clicks the CREATE operation. The new row in ADF TABLE gets created as last row at the Last navigation. So i need to show the new row on fir
-
Buying an older version of Dreamweaver
Hello, I would like to buy Dreamweaver CS 5 or 5.5 for Mac. As it is an older version, how do I go about doing this? Does it cost less than the newer versions? How much does it cost? Where can I buy it? Regards, Jane