Place to submit courses for criticism (constructive, or course ;)

Hello,
Does anyone know of any places we can submit courses before official release to get criticism from other e-learning developers? I work at a place where, while people are very cheerful (that looks great), I get little feedback from a pedogigical standpoint?
Thanks,
Dan

My guess would be to simply start a thread and post your links. I would love to share my courses but I create them with proprietary information. I would love to provide feedback.
I dont know if you have a CDN (Content Delivery Network) that you use or if you load them direct to an LMS. If you have a CDN you could just publish a "dummy" course with direct access.

Similar Messages

From Which place I should try for Job?

Dear Friends from India
I have complete my course SAP-SD from Hyderabad but not getting any call from any company That so why i want to move either banglore or delhi. Would any one suggest me to that where I should go. Please help me to take decision which place will be good for getting frequently call and walk-In in sap sd.
Arun

Hi
If you have just completed your SAP certification and are looking out for a job without any prior experience on SAP, then it could be tough, but it is not impossible.
As Rajesh has rightly responded, the first place would be to contact jobsites and placement agencies.. please register yourself on the jobsites, you will definitely receive calls.
And also do try to network amongst friends already in the domain for internal references within companies.
All the best!
Cheers
MR

Any one know good course for italian langauge

Ciao
I am looking for good course for Italian languige ; can any one can help me

Hi There,
I looked around the usual places for info...the card was made recently in the post os 9 era so there are no drives in existence for it. Mac OS 9 is a completely different OS that Mac OS X (unix based)so the drivers do completely different things in different ways in a different language. There are many hacks and software to get older products to work under Mac OS X but very very few that go the other way. Since OS 9 was declared dead years ago people have almost completely stopped writing software for it. My advice is keep an eye out on versiontracker.com to see if anyone comes out with anything, but they probably won't, or get an older card on eBay .... sorry

One of the instructors within our institution submitted their course for publishing. I, as the site administrator, have not received an email requesting the course be published and it hasn't appeared in our iTunes U site manager courses either. Any clues.

We are new to iTunes U and all of our teaching staff are generating courses for our school.
We have successfully published one course publicly.
One of our teachers submitted a course on 24 January. I, as site manager/amdinistrator have not yet received an email requesting that the course be published. We've double checked everything and there are no errors that we can find at our end.
Does anyone have any clues on how we can rectify this? The submit course option has now disappeared so she cannot resubmit.
Cheers
Brett

Hi and Welcome to the Forums!
Sorry for the delay replying...while your post is a bit old now, it still deserves a response.
First -- these forums are not a formal channel for support from RIM. Rather, they are user-to-user support forums where users help other users. As such, it is unlikely that RIM will see and respond to your inquiry.
What I suggest is that you have your affected users exercise their formal support channel -- which is available via their carrier. The carriers have the ability to escalate cases into RIM for resolution.
Best!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I want to start a new iTunes U course for catolog and I don't know what can I do please give me description about this title.

I want to start a new iTunes U course for catolog and I don't know what can I do please give me description about this title.

If you haven't already done so then you can contact iTunes support via this page and ask them why the message is appearing (these are user-to-user forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Problem with submit report for transaction LT23

Hi,
I want to submit report for transaction LT23 based on the double click on a field in the output of my report. I am using selection table to pass values. The problem is I have something called dynamic selections. I am using some selection fields from the dynamic selection option. Can anyone tell me how do I pass the values in such a case?

In your [submit|http://help.sap.com/abapdocu/en/ABAPSUBMIT.htm] statement in the [selection screen parameters|http://help.sap.com/abapdocu/en/ABAPSUBMIT_SELSCREEN_PARAMETERS.htm] use the [WITH FREE SELECTIONS|http://help.sap.com/abapdocu/en/ABAPSUBMIT_SELSCREEN_PARAMETERS.htm#!ABAP_ADDITION_5@5@] option to pass dynamic selections
NB: Use FREE_SELECTIONS_RANGE_2_EX to build the correct parameter texpr.
Regards
Raymond

I cannot access my old email address anymore, however I have used it for my apple ID and now I want to delete it because the account has never been verified in the first place so my password for it doesn't work. What do I do?

I cannot access my old email address anymore, however I have used it for my apple ID and now I want to delete it because the account has never been verified in the first place so my password for it doesn't work. So when I want to download apps I have to sign in with apple id but I can't so I made a new one, However I can't seem to be able to delete the old one. What do I do?

You can't merge Apple IDs. You also can't cancel (delete) and existing ID, you can only choose to stop using it.
If your old ID was compromised and you can no longer access it, you'll have to contact Apple for assistance. Go to https://expresslane.apple.com ; click 'See all products and services' at the bottom of the page. In the next page click 'More Products and Services, then 'Apple ID'. In the next page select 'Other Apple ID Topics' then then 'Apple ID account Security’.

How To Create On Submit Button For Master_detail Page ?

I have adf page that is master And detail view.
i want to have one submit button for master and detail block

Duplicate of How To Create On Submit Button For Master_detail Page ?
Please don'r post your question multiple times.
Timo

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
Customized Progress Indicator - Captivate blog
If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
And my approach, since you talk about only one question: create a custom question, because you'll have total control then.

RFC: Request for Criticism

Greetings,
I'm not entirely a teststand beginner as I have helped to maintain and fix bugs in several teststand systems over the last couple of years, but this is my first time programming a teststand system from the ground up. What I would like to do here is to present the basic architecture that I've come up with and humbly request any critiques, caveats, potential pitfalls, or comments about the implementation. Gory technical details follow:
This application needs to test multiple different model types through, for the moment, two different test routines that use different parameters per model. It would be nice to have the ability to add or modify the basic sequence in the future though all initial units will use one or both of the two test routines.
My current design plan is to use a custom Teststand OI programmed in Labview to interface to the sequence files in Teststand. In the relatively rare case that a sequence file needs to be modified or copied, that will be done in Seqedit itself. I considered doing a custom editor in the OI to limit the number of controls available and to steer the sequence development, but given the frequency with which that feature will be used (as in possibly never), that's been relegated to the back burner for now. All data about the model numbers, the test limits, and the test parameters will be stored in an Access database file with a front-end Access "view" written for the end-user to add new models and test specifications.
The basic program flow is as follows:
The program launches and runs through the Teststand initialization and launches a DAQ controller VI in a parallel loop to control the various solenoids and read the transducers, etc...
The user logs in through the Teststand OI.
Depending on their permission levels, certain controls are made available or disabled (i.e. calibration screen access, manual control mode, most of the default Teststand Menu Items).
Labview queries the database for a list of models and populates a combobox with the results.
When the user selects a model, Labview will look up the test sequences that are linked to that model and load them into memory with the Application Manager's OpenSequenceFile method (so the ListBar from the Full OI is populated with the currently available tests for that part). It will also unload any sequences that are not available for that part.
The user selects a sequence from the list and hits TestUUT's which runs an overridden PreUUT to prompt for custom information relevant to the test. The sequence executes with calls to custom VI's and step tests and loads the test parameters from the database from within Teststand itself. The report is generated within this sequence since it will be formatted differently for each test routine.
So, my basic question is to those with TestStand experience as to whether this sounds like a decent architecture for a test system? How would you do things differently or better?
Just a few more notes: I want the flexibility of a custom OI since I want to be able to hide the complexity of TestStand from the operators, but I also want to lean on the Teststand engine as much as possible to cut down on coding time. I had thought about trying to make the model selection and test-sequence selection all as a part of a master sequence that called the other test sequences dynamically, but I couldn't figure out how to do that easily as I think it would require changing the process model. I'm pretty sure I could figure it out, but I'm not convinced it's worth the time trade-off.
Thanks for your time,
Mike

Mike,
I have a couple comments, first is everything looks reasonable. There are many ways to do each item and I am just saying what I would do, not what you should do.
The program launches and runs through the Teststand initialization and launches a DAQ controller VI in a parallel loop to control the various solenoids and read the transducers, etc...
[cc] All code that talks to DAQ should be in TestStand sequences, never in the OI. You should be able to run your tests in the Sequence Editor and the OI interchangeably, easily. This is really the only thing I would insist on.
Also it sounds complicated with a parallel loop. I would strip this loop down to just the functions you really need to be running in the background all the time. Launch the parallel loop from the Test UUTs Execution Entry point of the process model, maybe in Setup Group, so that the parallel loop is only running while you are actively testing stuff. Or you could launch from Front End Callback when TestStand starts up, less simple.
The user logs in through the Teststand OI.
Depending on their permission levels, certain controls are made available or disabled (i.e. calibration screen access, manual control mode, most of the default Teststand Menu Items).
[cc] You can put your screens in the Process Model Configuration Menu as a Configuration Entry Point or in the Tools menu. Think about where it belongs. These should not be only visible in the OI and not the Sequence Editor.
Labview queries the database for a list of models and populates a combobox with the results.
[cc] This could be in the Front End callback sequence with some logic to fire only when TestStand starts up.
When the user selects a model, Labview will look up the test sequences that are linked to that model and load them into memory with the Application Manager's OpenSequenceFile method (so the ListBar from the Full OI is populated with the currently available tests for that part). It will also unload any sequences that are not available for that part.
The user selects a sequence from the list and hits TestUUT's which runs an overridden PreUUT to prompt for custom information relevant to the test. The sequence executes with calls to custom VI's and step tests and loads the test parameters from the database from within Teststand itself. The report is generated within this sequence since it will be formatted differently for each test routine.
[cc] This all sounds ok, I've seen others do this, but more work with the TestStand api. I'd start out simple. What you said here might be easier:
I had thought about trying to make the model selection and test-sequence selection all as a part of a master sequence that called the other test sequences dynamically, but I couldn't figure out how to do that easily as I think it would require changing the process model.
[cc] The master sequence you mention is Test UUTs Execution Entry Point in the SequentialModel.seq. I think you could put all the model/sequence selection in the PreUUT callback of Test UUTs in one big hairy Dialog for all products - select model, select seq, enter custom information relevant to the test. Then you'd have to dynamically select the sequence to execute, but this is a common architectural thing to do in TestStand, there's an example: <TestStand 4.x>\Examples\DynamicClientSequenceFile
You will have to modify the process model anyway for some of the above stuff^. If you really want to do this:
... want to lean on the Teststand engine as much as possible to cut down on coding time ...
[cc] then you should not be afraid to modify the process model, just make a copy first. Of course for the PreUUT you could override the process model with a PreUUT in the client sequence, but then you'd have to paste the same seq into all your test sequences.
cc

FAGLL03 : Submit syntax for dynamic selections

Hi Experts,
My z report contains following fields in selction screen.
1 . G/ L account
2. Comapny code
3. posting date
4. document type
5. layout
In my z report i used following syntax for passing selection screen values to standard program and getting data.
SUBMIT FAGL_ACCOUNT_ITEMS_GL
                  WITH SD_SAKNR   IN S_SAKNR
                  WITH SD_BUKRS   IN S_BUKRS
                  WITH X_OPSEL    EQ ' '
                  WITH X_CLSEL    EQ ' '
                  WITH X_AISEL    EQ 'X'
                  WITH SO_BUDAT   IN S_BUDAT
                  WITH PA_VARI    EQ P_VAR
                  EXPORTING LIST TO MEMORY
                 AND RETURN.
The above syntax is not working for dynamic selection field ( document type ), entire document types data is fetching from standard program. I want to fetch document type data based on my z report selection values for document type field.
Expect for document type field , submit syntax is working.
kindly provide submit syntax for my above requirement .
Any suggestions from experts....
thanks & regards,
Hari priya
Edited by: Hari Priya on Aug 24, 2009 4:33 PM

Hi,
Try like this.
call function 'RS_REFRESH_FROM_SELECTOPTIONS'
exporting
    curr_report = 'FAGL_ACCOUNT_ITEMS_GL'
tables
    selection_table = i_sel[].
Fill your profit center values in i_sel
Submit FAGL_ACCOUNT_ITEMS_GL with selection-table i_sel and return
WITH FREE SELECTIONS TEXPR AND RETURN
Regards,
Shamma

What is an alternative to bins? Sometimes I want to make custom transitions and I need a place to store them for easy use.

What is an alternative to bins? Sometimes I want to make custom transitions and I need a place to store them for easy use.

Either projects or events. You can make a compound clip in a event used to hold favorites. Add a couple of generator items to it and apply the custom transition. You can copy and paste from the compound clip to any project. Hold everything you want into the one event. It probably won't ever get very big, and the render files can be dumped at any time. You can simply move the event from machine to machine or place to place as needed, just as you can other custom content, like keyboard layouts and custom color presets.

Hi,When I submit the budget for approval, it is approved and base lined when we submit it for approval. It does not go in approval hierarchy. We want it to flow through approval hierarchy.

Hi,When I submit the budget for approval, it is approved and base lined when we submit it for approval. It does not go in approval hierarchy. We want it to flow through approval hierarchy.

Hi Amit,
if I understand correctly, you just need for a particular object a tooltip to be showed.
There is no such functionality hence you used the trick of using a hyperlink, which if clicked generates undesired behavior.
Hyperlinks don't allow themselves to be disabled, therefore if you are using that workaround you must cope with that.
I would suggest to create an Idea at [https://ideas.sap.com] for having in the properties of an object a tooltip, then post the link to the idea here and other users will vote if they like the idea.
Thanks and regards,
Simone

(Help) system classpath -Vs- the place where weblogic looks for classes

The following is my app's hierarchy.
myapp
|
|__myjsp.jsp
|
|__WEB-INF
|
|__classes
|_ MyClass.class
I am not able to use MyClass within myjsp.jsp
i.e. a scriplet like that shown below gives an error stating that MyClass isnt found
<% MyClass obj; %>
I've tried setting the system classpath, but to no avail.
Is there a difference between the system classpath and the place where weblogic looks for classes?
(I am running my app by creating a myapp.war file and placing it in autodeploy folder)

Try moving your class to a named package and use the appropriate import statement in your JSP. Loading it from WEB-INF/classes/packagename should be fine so you might want to remove the other classpath mods you made to eliminate that uncertainty.
Here's a snippet from http://publib.boulder.ibm.com/infocenter/dmndhelp/v6rxmx/index.jsp?topic=/com.ibm.websphere.nd.doc/info/ae/ae/rweb_jsp_migration.html:
"As of JSP 2.0, referring to any classes from the unnamed or default package is not allowed. This can result in a translation error on some containers, specifically those that run in a JDK 1.4 or greater environment which will also break compatibility with some older JSP applications. However, as of JDK 1.4, importing classes from the unnamed package is not valid. See Java 2 Platform, Standard Edition Version 1.4.2 Compatibility with Previous Releases for details. Therefore, for forwards compatibility, applications must not rely on the unnamed package. This restriction also applies for all other cases where classes are referenced, such as when specifying the class name for a tag in a Tag Library Descriptor (TLD) file."
HTH,
Mike
Weblogic/J2EE Security Blog: http://monduke.com

Submit button for PDF

The submit button on my PDF form (Acobat X pro) no longer works. I created a submit button for a PDF form about two months ago and it worked then, but it is no longer working. Applicants fill the form out and email it back to us as an email attachment.
Is there a limit to the amount of forms that can be sent to us? I would appreciate suggestions.

You say it's Reader-enabled, but that you didn't do FIle > Save As ...
This is the process that causes it to be Reader-enabled, though putting it through the Distribute Form process does as well.
What Reader-enabling does is allow Reader to save a filled-in document. It otherwise cannot, though it can fill. print, and submit (form/comment data only). Reader 11 changes this though as it is able to save a non-enabled form, but not everyone will have Reader 11 so you shouldn't count on it being used.
If you distribute an enabled form that was enabled with Acrobat (as opposed to LiveCycle Reader Extensions), then you are limited by the Acrobat License Agreement from using data form no more than 500 instances of the form that has been returned to you, including hardcopies. Removing the submit button would make no difference.
A different approach though that will make everything more reliable is to set up the form to be used with Adobe's FormsCentral. Submitting by email is fraught with problems, but submitting to a web server as with FormsCentral eliminates all that. It allows essentially an unlimited number of submissions, though the data table will only show 5000 at a time. It makes it easy to get at the form data, which is more convenient than with Acrobat. It also allows you to generate a copy of the filled-in form for a particular submission if you ever want one. It provides the user some feedback when the form is successfully submitted, unlike email. When you distribute a PDF via FormsCentral, it Reader-enables the form and you can then distribute it via email, web site, or some other means. It's also very reasonably priced. It can be set up to send you and others an email notification whenever anyone submits a form. It can also send the user a notification that it was received, as long as they include their email address in a field on the form. No, I don't stand to benefit from you using FormsCentral, though I heard I might get a gift card for referring folks.
Seriously though, it really is a nice service that you should consider.

Place to submit courses for criticism (constructive, or course ;)

Similar Messages

Maybe you are looking for