Place video with no progress bar?

Hi
I'd like to place a video seamlessly so it plays like an animation, with no progress bar or controls. It's easy to exclude the controls but there is still a progress bar. how to remove ?
learning a lot here!
thanks for the help!
S

If you disable "tap to view controls“ the video should play seemlessly.
The desktop viewer shows the progress bar even with that setting disabled.
On your iPad it will be without.
—Johannes
(mobil gesendet)
Am 08.12.2011 19:32 schrieb "SteveLunny" <[email protected]>:
   place video with no progress bar?  created by SteveLunny<http://forums.adobe.com/people/SteveLunny>in
Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/4071925#4071925>

Similar Messages

  • HT1212 My ipad mini has been crashing a lot recently so I started a system reset. However, it's now stuck with the progress bar less than a quarter gone: this has been the case for several days now. I have tried resetting from itunes but it needs the pass

    Now it's stuck with the progress bar less than a quarter full. I have also tried resetting through itunes which works right up to the point where itunes states that it needs the passcode to be inputted into the ipad to connect to it. At which point it then sticks at the same progress bar point. HELP!! please, this ipad is really important to my work.

    Well the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
    The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
    Its a shame you have to go through what you going through.
    Good Luck

  • HT1451 I am trying to restore my iphone but its stuck at the apple logo with the progress bar. What should I do?

    I am trying to restore my iphone but it has been stuck at the apple logo with the progress bar and it shows no signs of loading at all. What should I do?

    Hello kuukua.b,
    Thanks for using Apple Support Communities.
    Please try to restart and reset your iPhone by following the steps below, and then resume your restore process.
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    Take care,
    Alex H.

  • Problem with the progress bar

    I've have a problem with the progress bar of my ipod. I bought a 5th generation ipod about 8-9 months ago. Now its progress bar stuck so it only shows the 5 dots. It doesn't show both scrubber bar and song time bar. When I press the center button, the 5 dots dissappear from the screen and then reappear but it doesn't show the other bars. Do you know what is the problem and How can I fixed it?

    have you tried resetting ipod, cause as far as i know, this is sometimes just a temporary glitch, mine does this.

  • When my Mac battery dies and I turn it back on, it always crashes on the grey screen with the progress bar, then it restarts (taking forever) and does not remember any of the programs I was running. MacBook Pro 13 inch running Mavericks

    When my Mac battery dies and I turn it back on, it always crashes on the grey screen with the progress bar, then it restarts (taking forever) and does not remember any of the programs I was running. MacBook Pro 13 inch running Mavericks

    http://osxdaily.com/2014/10/17/os-x-yosemite-installation-stuck/
    also use the Command-L to view logs during installation

  • Splash Screen with a progress bar at the bottom

    Hi,
    I want to display a splash screen with the progress bar at the bottom just like eclipse , limewire etc
    Take a look at the image below.
    [http://imageupload.com/out.php/i138889_splashScreen.png]
    Can anybody tell me how to achieve this type of splash screen?
    Thnx in advance.

    Search Google.
    This is one of the results: [Splash screen avec progress Bar|http://www.labo-sun.com/resource-fr-codesamples-1126-0-java-gui-splash-screen-avec-progress-bar.htm]

  • HT4623 My iphone had an error while updating and is now locked up on the apple screen with the progress bar

    Itunes was updating my phone from 6.01 to 6.1 and it came up with an error. I closed the error not thinking about it and now my phone is locked up on the apple screen with the progress bar on it.

    hi i tried to update my iphone 3gs from ios 4.1 to 6.1.2, while doing the same i got an error message (-5000) which i ignored an continued. it was almost about to complete while my itunes is not able to detect the iphone kindly help.

  • TS3681 the device displays the Apple logo with no  progress bar for 8 hours until battery run flat.

    My Iphone4 displays the Apple logo with no progress bar for 8 hours until battery went flat this was after i try to make an up date know the  i tunes dosent reconise my phone.
    Can you please help me
    Thank you.

    http://support.apple.com/kb/ht1808

  • After a reset of settings on IPad2 it turns "on" but i only get to the logo screen with the progress bar under it. so it turns on to logo then to progress bar screen then off. and repeats over and over

    Well as I said in the "question", I did a reset of the settings on my IPad2. however when it powered back on from resetting. it lets the the logo screen with the progress bar under it. The progress bar gets about 1/4 of an inch from the left then stops. After a few mins Ipad shuts off then turns on to the logo screen, then goes to the logo/progress bar screen, does whats said above, then off. That cycle just repeats over and over. Any help with this would be appreciated.

    Recovery Mode Step by Step
    1. Hold Sleep/Wake button down and slide to turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
    5. Release Home button.
    On Computer
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. iPad Recovery Mode on computer screen
    8. Select "Restore iPad"...
    9. Select "Restore and Update"
    10. Extracting Software.
    11. Preparing iPad for restore.
    12. Waiting for iPad.
    13. Verifying iPad restore...
    14.Restoring iPad software.
    15. Verifying iPad software.
    16. Verifying iPad Restore...
    17. Restoring iPad firmware...
    18. Your iPad is restored to factory settings; keep iPad connected to computer
    19. Activate iPad
    20. Enter Apple ID and Password
    21. Continue
    22. Welcome to Your New iPad
    (a) Set up as new iPad   (b) Restore from this backup (select from list of backups)
    23. Restore from this backup
    24. Continue
    25. Restoring iPad from backup
    26. The settings of your iPad have been restore; keep iPad connected to computer
    27. Syncing iPad (Step 1 to 5)
    28. Preparing apps to sync
    29. Copying 1 of 9
    30. Sync apps, movies and music to iPad
    31. Finishing syncing
    32. Eject iPad

  • My iPhone 4S got stuck on the apple logo with the progress bar!

    Afternoon. My iPhone 4S got stuck on the apple logo with the progress bar! but every time after I restore the 4S the progress bar starts again and stops at different stages of the loading process! Can anyone help with this please?
    All this started happening after I tried to download the lastest update (iOS 7.1). The 4S went and got stuck on the apple logo and progress bar!!

    Hello kuukua.b,
    Thanks for using Apple Support Communities.
    Please try to restart and reset your iPhone by following the steps below, and then resume your restore process.
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    Take care,
    Alex H.

  • HT201263 my iphone 3g Stops responding, showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes ..plz give me suggusition ?

    Stops responding, showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • Internet recovery gets stuck on the spinning globe with the progress bar below.

    Hello Everybody!
    I'm trying to fix the iMac (27-inch, Mid 2010) of my friend. He said it doesn't boot anymore and just gets stuck on the grey screen with the Apple logo and the spinning wheel below. So my first step was to go into the Startup Manager by pressing the Option key after the chime. There I was presented with the Macintosh HD and the Recovery HD. After selecting the Recovery HD to access the Disk Utilities I got stuck on the grey screen with the Apple logo and the spinning wheel again. So I guess the data on the drive is corrupted and might have to be replaced. But before I do that, I wanted to give the Internet Recovery a try. I connected the iMac to the internet using an ethernet cable and pressed Command + Option + R after the chime and the spinning globe appeared with the info: "starting recovery process from network. This may take a while". After a short time the sentences are replaced by a progress bar and a timer that is counting up. The progress bar then moved for a tiny little bit and then nothing happens anymore but the timer keeps counting up. I waited for quiet some time before I gave up. I did not get any errors so I can't provide any other useful information. Can anyone give my some advice? I read in other posts that the ISPs of specific countries block ports which are needed for the internet recovery. I'm in Thailand right now. Does anyone know if that might cause the problem?
    Thank you for all your help!

    Neither we nor Apple support jailbroken iDevices.

  • HT4623 so i downloaded the iOS 7 onto my computer. then wanted to upgrade. iTunes is waiting to connect to the phone after the restart. now it's stuck in the black screen with the white apple with the progress bar. then i look to iTunes and found out it s

    so i downlaoded the iOS 7 onto my iTunes. then i wanted to upgrade. the phone is stuck in the black screen with the white apple and the progress bar. next time i click on iTunes, it says my phone "has an error and cnanot update" and now it is stuck on the black screen with the white apple and the progress bar almost finished. hasn't moved in 20 minutes.

    No problem, glad to help!
    Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

  • Problem with the progress bar in swings

    Hi all,
    I need to show a progress bar till another window opens up in swings.Below is the code i used to show the progress bar.My problem is i am able to get the dialog box where i have set the progress bar but i cldnt get the progress bar.But after the specified delay,another window gets loaded.
    Plz tell me how to show a progress bar till another window loads.Any help is greatly appreciated :-)
                    //Show the progress bar till the AJScreens loads.
                    // Create a dialog that will display the progress.
                    final JDialog dlg = new JDialog(this, "Progress Dialog", true);
                    JProgressBar dpb = new JProgressBar();
                    dpb.setVisible(true);
                    dpb.setStringPainted(true);
                    dpb.setBounds(70,60,150,10);
                    dlg.getContentPane().setLayout(new BorderLayout());
                    dlg.getContentPane().add(BorderLayout.CENTER, dpb);
                    dlg.getContentPane().add(BorderLayout.NORTH, new JLabel("Progress..."));
                    dlg.setDefaultCloseOperation(JDialog.DO_NOTHING_ON_CLOSE);
                    dlg.setSize(300, 75);
                    dlg.setLocationRelativeTo(this);
                    // Create a new thread and call show within the thread.
                    Thread t = new Thread(new Runnable(){
                        public void run() {
    System.out.println("atleast comes here --->");
                            dlg.show();
                    // Start the thread so that the dialog will show.
    System.out.println("Gonna start the thread --> ");
                    t.start();
    System.out.println("Thread started --> ");
                    // Perform computation. Since the modal dialogs show() was called in
                    // a thread, the main thread is not blocked. We can continue with computation
                    // in the main thread.
                    for(int i =0; i<=100; i++) {
                        // Set the value that the dialog will display on the progressbar.
    System.out.println("i ----------> "+i);
                        dpb.setVisible(true);
                        dpb.setValue(i);
                        try {
                            Thread.sleep(25);
                        } catch (InterruptedException e) {
                            e.printStackTrace();
                    // Finished computation. Now hide the dialog. This will also stop the
                    // thread since the "run" method will return.
                    dlg.hide();regards,
    kani.

    Yeah i have tried that also.But no hope.
    My problem is am able to get the dialog box but not the progressbar,after the specified delay the dialog box goess off and the new window loads up.
    the progress bar is not getting displayed..that is my problem..
    can u plz help me out.

  • Mac OS Mountain Lion Shuts down at Apple logo with a progress bar appearing under it.

    Last Night there were two updates available which i downloaded and after that it asked for a restart, when i restarted the Mac, it gave me a progress bar for the updates at the middle of which it said, Installation of Updates can not be Completed and My mac book froze. After that i Shutdown my Macbook Pro by holding the Shutdown button for a little while.
    When i restarted the Macbook Pro, it gave remained at apple logo for a while then a progress bar appeared after which it shut down itself and it is doing the same since then.
    I have got windows over Boot Camp in my Macbook Pro and i can boot into Windows which is running fine and i can access all the data on my Main Partition through Windows as well but i am unable to boot into Mac os Mountain Lion.
    I have tried Repairing the Partition by going into Recovey and it Fails, I have tried Resetting the PRAM and that hasn't worked either, i have tried re-installing the Mac os Mountain Lion from Recovery but that says that all my Partitions are Locked.
    I haven't got any backup of my data through Time Machine so i was thinking as i can boot into Windows and access the data and as all this is because of the Installation of Updates Failure so there should be some way to manually edit the Boot Files to trick the Mac book into thinking that there weren't any updates or to simply clear the data from Updates.
    Can anyone please help me if you have any better suggestions.

    If it's still under warranty or with AppleCare (even if it isn't, really) take it in to an Apple store.  If you can get at your personal files from Windows, copy them to an external drive first.  That includes anything you have in Windows that you need to keep.  Sounds like the drive is going south and if it has to be replaced, you'll lose everything if you don't have it backed up.

Maybe you are looking for

  • Switching off layer in smart object causes it to move in photoshop

    Dear all. I am stumped. I have piece of packaging artwork that I'm using in my 3D software. Smart Objects are great for this as all I have to do is go to Photoshop, double-click the Smart Object, then in Illustrator turn off the layers I need etc and

  • Posting pics on iWeb Photo pages

    hi, i did some research on the issue i am having but couldn't find any resolutions. i'm hoping someone can help me with their experience / expertise. this is the weirdest thing and perhaps i'm overlooking something obvious? i have taken digital pics

  • How do i copy contacts from iphone 4s to ipad?

    Can anyone help new to this How do i copy contacts from iphone 4s to ipad?

  • Vendor Advance

    Hi we are creating a vendor down payment using F-48. However, on the vendor line item, system is asking for tax code field as being compulsory. I have checked the field status of the Reconcilliation Account for Vendor and the Posting Key. The Tax cod

  • Steps before data load in BI 7.0

    Hi all, We have upgraded the BW from 3.1 to 7.0 SP 9. What are the steps and configurations that are to be taken care in BW and in R3 before extracting the data. Data flow is in 3.x model. We are not migrating to the new data flow. Do i need to migra