Placed images have no clue about their scale

This is one of the most frustrating things ever in Illustrator.
If you place an image and scale it up or down, there's no *******' way to figure out what its scale is later on. Well, there is: dashboard calculator.
Seriously: This is *so* lame.
This is just another of those numerous inconsistencies within the CS3 suite.
ps. Et cetero censeo... And further I think the scroll wheel should work in all panels and in all CS3 apps.

Using CS3 on a Mac, for me double-clicking on a placed image in the Links panel, or choosing "Link information..." from the fly-out menu brings up a dialog box which gives among other things, file name, location, and transformations, which includes scaling and rotation.

Similar Messages

I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go.

I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information, his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go. Is there any way to eliminate his iCloud account and make mine the primary without rebooting it back to factory settings? There was an update, I believe, that I couldn't install because i didn't have his password that is what made me aware that his acct. was still active. I don't know what to do. Any help is greatly appreciated. Thank you.

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

To BALTWO:I really appreciate the fast sent solution about my failure to burn DVDs with Lion, but I am 89 years old and think I know something about computers, but don't have a clue about ZAPPing PRAM nor RESET SMC. I also can't find any evidence of a p

I really appreciate the fast sent solution about my failure to burn DVDs with Lion, but I am 89 years old and think I know something about computers, but don't have a clue about ZAPPing PRAM nor RESET SMC. I also can't find any evidence of a preserved earlier OS (Snow Leopard). I also don't know how to partition further my drive after all this time…(I used to have Parallels partitioned) but as I said I cannot find any where on the HD SN. Is it possible that it doesn't exist anymore? Not too technical, please, unless that is the only possible answer to this whole delemna..

Blue colored text in these forums usually indicates a clickable link. The two I posted in https://discussions.apple.com/message/18789716#18789716 bring up Apple's articles on those subjects. For partitioning information, peruse Disk Utilities help files, especially
Changing a disk’s formatting and partitions
BTW, the proper way to respond to a post is to use the Reply button and not start another. Good luck and hope you make it to your tenth decade—I'm in my eighth.

ICloud down second day in a row - - spoke to Apple support - -they have no clue about what is going on

iCloud down second day in a row -- spoke to Apple support - - they have no clue what is going on OR when the problem can expect to be resolved.

Hi raulraghav,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

I just restore my ipad and i have no clue about the reset to i cloud pass word

i just restore my ipad which was disabled, but i cant remember my i cloud pass word and eithrr e mail i used or security quections what do i do

Contact Apple support to have your Security Questions reset:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB

How I could find that an image have transparent background

Hi All,
I have an image with transparent background placed in an ellipse item.
Is there exist a way using which I can find out that placed image have a transparent background?
Regards,
Alam

This may help you find your iTune account:
Frequently Asked Questions About Apple ID
Without knowing your old account info there is nothing you can do.

I have no idea about security questions

I tried to purchase the song on itunes but it directed me to security questions that I have no clue about. I attempted to send reset security info to my email address millions and millions of times but was not sent. Why the **** was this... and ****?

1) Apple ID: All about Apple ID security questions
If necessary...
2) See Here... ask to speak with the Account Security Team...
Apple ID: Contacting Apple for help with Apple ID account security
3) Or Email Here > Apple Support iTunes Store Contact

I bought an Apple TV and used its yesterdary all the day...when I rented a film, its spend about 4 hours to charge... I think it isn't normal... Did Apple had some problem in their network yesterday? Do you have some clue to me? Tks and Rgds

I bought an Apple TV and used its yesterdary all the day...when I rented a film, its spend about 4 hours to charge... I think it isn't normal... Did Apple had some problem in their network yesterday? Do you have some clue to me? Tks and Rgds

Download time is mostly related to your internet connection speed. Beside, there's no need to wait for the entire movie to download before you start watching it; only some buffer needs to be downloaded. When the buffer is filled, you should get a message that your rented movie can now be watched which usually happen within a minute of the purchase on standard cable connection.

Placed image scale anomaly

A funny thing happened on my way to the theatre ...
Some days ago I placed an image into an Illie file, linked, 100% scale.
This morning I needed to edit the linked file in Photoshop. This involved cropping a bit off the bottom of it, thereby changing its dimensions.
Just to check that everything was still o.k. at the Illie end (because I somehow suspected that it might not be), I opened the Illie file.
Lo and behold, everything was not o.k. The placed image had scaled itself up by some few % becoming too wide.
Rather than fiddle around with scaling, I placed the image again and it came in in the right size.
I notice that exactly the same thing happens when I have Illie open while I am editing the image. The placed image hops visibly when Illie reads the new size.
Can anyone tell me why this is and how does Illie recognise the size of placed images?
Does she calculate the area or what is it that happens?
Here's an example that I tried afterwards, not having kept the original measurements:
Original image file 63.218 x 47.414 mm (placed in Illie at 100% scale)
Cropped in PS to 63.218 x 44.027 mm
Changes in Illie to 64.846 x 45.161 mm (scale 102.576%)
I can't make sense of the figures. Is anyone out there better at maths than I am? (Sure there must be!)

When you update a link, then image is scaled to fit the original bounding box size because of the default in the links palette >> placement options >> transforms
Links palette >> placement options>> dimensions should help. What I do not like most of these options later have blank sapce around the image, and it is hard to use the transform palette or snapping to for example snap to the edge of a die or guide.
I replace the image after the canvas size changes in photoshop, cause placement options though it has been around forever is not really that useful. Maybe someone else out there agrees/disagrees or has a different way to deal with this updating of resized images in Illustrator

Placing images at an exact scale in Indesign CS5?

Hi all,
I'm hoping someone can clue me in here... I've just updated from Indesign CS3 to CS5. I was hoping in the upgrade Indesign would give you an option for placing images in picture frames at an exact scale (like you can in Quark), for instance if you place an empty picture box on the master pages and enter 55% scale you would drop in images on each page of the layout at 55% scale.
In Indesign CS3 the closest I could get to that was to place an "FPO" image in the picture boxes on the master pages at 55% scale, then when I'd replace each FPO on the layout pages with my images they would drop in at 55% scale. It worked pretty well.
With CS5 I'm finding that when I replace an FPO image it will still drop in at the same scale the FPO is at, but ONLY if you load and place one image at a time... if you load, say, twenty images and drop them into the layout replacing the FPO images, they come out as prorortionally fitted to the picture frame... NOT as 55%.
this is a real issue for me as I routinely work on layouts where I need to place 400 and up images at an exact scale...
Anyone know a work around here, or any tips?
Thanks in advance.

As far as I know, you can't set scaling for a empty frame. You can use a placholder image and scale that, and if you turn off relink preserves dimensions relinking to a new image would preserve the scaling, but only if you do it one at a time through the links panel. Using the Place command and replacing theimages will not preserve the scaling, so through the interface there isn't much help.
On the other hand, I think this could be scripted. If you need all the images to be the same scale it should just be a matter of looping through the document images and setting the scale. If none of the scripters are taking notice here, ask over in the scriping forum.

HT201412 My Fourth Gen iPod Touch can only last about ten minutes before it freezes, shuts down and restarts. I have no clue what's happening; what do I do?

I have no clue what's happening. It just started yesterday and I'm worried about it. Also, whenever I try to go into my email, go onto the camera/photos app or select my cloud option in general settings, I can't.

Apps crashing
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

I am getting messages that I can't download and read .pdf files since I have the wrong Adobe reader. I know about their security disasters of course, but I downloaded the latest version of Adobe Reader from the Adobe web site and I have other ,pdf file re

I am getting messages that I can't download and read .pdf files since I have the wrong Adobe reader. I know about their security disasters of course, but I downloaded the latest version of Adobe Reader from the Adobe web site and I have other ,pdf file readers as well, and for some reason they won't work either. I have 5 computers running top end processors and RAM. By this I mean I have one, this one which I am using that has an AMD Phenom Black 3.2 Quad-core with 8 GBs of Corsair top DDR2 RAM, my other two AMD have either an Athlon II triple core with 4 GBs of DDR2 Corsair RAM, one with the Phenom X4 965 3.4 GHz Quad-core with 8 GBs of their best DDR2 RAM, and two Intels with the i7 920 Processors using the triple channel 1366 socket processors and one with 8 GBs of low latency DDR3 RAM and the other with 4 GBs of the same RAM. I am getting the message on this one, which has a fresh install of XP Pro X64 operating system, as do the other 4 as well. I have run Avast Business Pro Anti-virus on this one, which I am getting the message on with a single result which I deleted, and also both Spybot Search and Destroy, which came back clean as well as Malwarebytes Antimalware, which got a lot of tracing cookies now removed, and SuperAntiSpware which also found a few cookies also now deleted. Can you tell me what I need to do to get these files to show as .pdf files rather than as a clean blank page. One other issue is that I wish to know how to turn off my downloads so they are saved and Mozilla will give me the option of returning them instead of me losing them all together as it does now. Thanks for your assistance. If there is another Adobe reader I should download and install, could you provide me with the link to it? I appreciate your assistance here
== When I download and try to read a .pdf file and when I am asked to turn off all Firefox files and if I do, I lose them since I need to know how to save them without rebooting my computer.

Brilliant! Problem solved! Thanks so much.

Since v.6.0.2, was installed [I have Win XP] my eBay pages do NOT load properly ... the images cannot be enlarged and I cannot save things to My eBay. Still works OK with IExplorer .... I do not have a clue on the geeky stuff

Since v.6.0.2, was installed [I have Win XP] my eBay pages do NOT load properly ... the images cannot be enlarged and I cannot save things to My eBay. Still works OK with IExplorer .... I do not have a clue on the geeky stuff .... WILL THIS FIREFOX ERROR SOON BE FIXED ?
Don't know what more to ask. I looked at the known problems and couldn't make any sense of the answers

Upgrade your browser to Firefox 8 and check
* getfirefox.com

After installing Leopard, my G4 will no longer boot in OS 9.22. (Classic still works, but I need it to boot in OS 9.) Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? What can I do to fix it?

After installing Leopard, my G4 will no longer boot in OS 9.22.
(Classic still works, but I need it to boot in OS 9.)
Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? (And what can I do to fix it?)
Details:
G4 Gigabit Ethernet
Boot ROM version: 4.2.8fl
Accelerator card added: 1.6 MHz
1.5 Gig Ram
I have erased the partition that had Leopard installed on it.
I zapped the pram.
In Open Firmware, I "reset-nvram", and then "reset-all"
I tried to reinstall G4 FW Update 4.2.8, but that must be done when booted from OS 9, and of course, that's the problem: it won't boot into 9.
I tried restarting from 9.2.1 DVD.
I tried restarting from an external firewire drive containing OS 9.2.2.
I tried moving a fresh OS 9.2.2 system folder into an empty partition on an internal hard drive. (Partition was created WITH OS 9 drivers installed.)
All attempts to boot into OS 9 give me the same results - grey screen - no spinning beach ball, no icons or logos - just a blank grey screen.
This machine still works fine in OS 10.3 and 10.4, and it worked fine for many years booting into OS 9, until I installed Leopard, and I haven't been able to boot into OS 9 since then, although I have done considerable research online and tried many things.
I have since learned that this machine does not support Leopard - 10.5. Fine, but how did it break 9.2.2?
Any help greatly appreciated.

Thanks for checking in, BDAQua.
Problem solved.
In the docs that came with my Powerlogix accelerator card, I found this sentence buried:
"If you reset the PRAM, the NVRAM code for OS9 compatibility is cleared, so you will have to boot from the Firmawre Update CD and perform this process again in order to boot in OS9."
The "process" it's referring to is the process of setting up the NVRAM for booting into OS9 from the CD.
Fortunately, I was able to find the disk, and it worked as expected. I can now, once again boot into OS9.
Conclusion: My (unadvised) attempt to load Leopard on this old machine apparently reset the PRAM on the accelerator card and cleared the NVRAM code for OS9 boot. Although I did attempt to reset the NVRAM via Open Firmware, it did not reset it on the accelerator card.
So, thank you BDAQua, for your "Ah yes" . . . that's all I needed to steer me in the right direction.
Gratefully,
tupester

Hi I have a question about shooting in Raw with my Canon EOS 6d. I'm in the process of learning photography and my goal was to start shooting in raw. I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The pho

Hi I have a question about shooting in Raw with my Canon EOS 6d.
I'm in the process of learning photography and my goal was to start shooting in raw.
I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The photoshop camera raw plug-in did not recognize the format. If these files are from a camera, you may need to update your camera raw plug in."
In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6. My version of CS5 is 6.0.0.205. Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost. THANKS in advance!
Heather

In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost.
It all depends on your preferred workflow and your budget.
Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
Camera raw, DNG | Adobe Photoshop CC
Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
Creative Suite 6
Or join the Cloud and pay the monthly fee
Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR

Placed images have no clue about their scale

Similar Messages

Maybe you are looking for