Placed iview on webpage in web page composer - get 404

Hello Gurus,
    has anyone come across this please?
    I have successfully made Iviews visible to KM for web page composer and so I was able to drag and drop the iview onto the page but immediately got a 404 the requested resource is not available.
the iview has end user read permissions so I dont think it's a permission problem.
thanks for any advice,
Tim

Hi Epexpert,
      I have already looked at the log files. You get this message which is puzzling:
while establishing WDContext - com.sapportals.wcm.repository.ResourceNotFoundException: request uri does not map;
servlet URI computed to be
<http://<my host name>/irjj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fsandpit.folder_sandpit!2fTimParker!2fWPC_Iviews!2fpri.brm.sap.iview.home>,
request URI was
<//irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fsandpit.folder_sandpit!2fTimParker!2fWPC_Iviews!2fpri.brm.sap.iview.home/documents/Content/Internal/html/home.html>
particluraly puzzling is the irjj in the path just after the hostname....
the iview I am attempting to add has everyone group read access with end user permissions.
thanks for looking at this.
Tim

Similar Messages

  • Web Dynpro iviews integration with web page composer

    Hi,
    Can web dynpro iviews be integrated into web page composer? I was trying to integrate one ESS web dynpro iview into wpc but the system is throwing an error:
    We are on EP7.01 SP3 (Enhancement Pack1). Please advice if the integration is possible in Enhancement Pack1.

    Hi,
    According to the documentation Web Dynpro iViews are not supported : [Configuring Entry Points for iViews|http://help.sap.com/saphelp_nw70/helpdata/EN/06/4776399abf4b73945acb8fb4f41473/content.htm].
    Regards,
    Pierre

  • IView size in Web Page Composer

    Hi all,
    I have created one page using Web Page Composer. I have designed some forms using XML form builder and created KM navigation iView. If I assigned that iView to page , it takes full height. How can we fixed the height of the iView and what should be given to the properties of iView?
    Help me in this regard.
    Regards,
    Hemalatha J

    Hi
    Maby this will solve your problem:
    Change the Isolation method property on the iView to Embedded.
    (Open your iView properties - Property category: Load - Isolation Method: Embedded)
    This makes (at least some types of) iViews appear on your Web Page Composer page in full height instead of with limited hight and scroll.
    /Linda

  • Deactivate automatic content migration for Web Page Composer (WPC) 2

    Hi,
    on our production system we are using at the moment Web Page Composer for SAP NetWeaver 7.0. Soon we would like to upgrade the system to release 7.3
    We have now already set up the content for the new Web Page Composer on a pre-production system. After the production system is upgraded to the new release, it is planned that we will transport the content for the new Web Page Composer from the pre-production to the production system.
    As far as I know, the content of the old Web Page Composer gets automatically migrated during the upgrade of the production system. Due to the reason we will the use content of the pre-production system, the automatic migration step is not necessary anymore during the upgrade.
    Is there any configuration option that allows us to disable the automatic migration of old Web Page Composer content?
    Best regards
    Mario

    Regarding the feedback of the SAP support, it is not possible to deactivate the automatic content migration for the Web Page Composer.

  • Iview in web page composer page

    hi,
    how insert iview in web page composer page?.I try to insert iview in webpage compser that showing only web content folder
    regards,
    arun

    Hello Arun,
    See http://help.sap.com/saphelp_nw73/helpdata/en/e2/44dc299bf548578ef9830c0c1c0f0b/frameset.htm
    Regards,
    Lorcan.

  • Web dynpro iview in web page composer ?

    Hi All,
                     I am developing one Web site by using Web Page Composer. Can anyone help me for how to use Web Dynpro iview on web page.
    Regards,
    Rahul.

    HI Rahul,
    As of now we can not include a Web Dynpro iView on the WPC page like other iViews.
    But you can try to create a URL iView from Web Dynpro application
    and then add that URL iView to your page.
    _Vishal

  • URL iView in Web Page Composer

    Hi,
    I have created a URL iView in the PCD and I wanted to embed this iView in the container of the Web Page Composer page.
    I have created an entry point to the PCD folder that contains the URL iView.  The PCD URL to the iView is
    http://abc.abc.net:50000/irj/servlet/prt/portal/prtmode/default/prtroot/pcd!3aportal_content!2fcontentlib!2fcommercial!2fiviews!2fcollaboration_wpc!2fiviews!2fpetroleum_tmu!2fcom.bhpb.com.gen.url_iview
    The URL iView is a simple URL iView that redirects to http://www.google.com
    When I drag and drop the URL iView to the container, I saw from the container properties that the URL to the iView is change to
    http://abc.abc.net:50000//irj/servlet/prt/portal/prtmode/default/prtroot/pcd!3aportal_content!2fcontentlib!2fcommercial!2fiviews!2fcollaboration_wpc!2fiviews!2fpetroleum_tmu!2fcom.bhpb.com.gen.url_iview
    A additional "/" has been added to behind the port 50000.  This is weird.....!!!!
    It is causing me problems as we have an IIS Proxy that does redirection reading behind the URL characters after the port 50000.
    Can anyone explain????
    Thanks.
    Mike Lee

    Hello Arun,
    See http://help.sap.com/saphelp_nw73/helpdata/en/e2/44dc299bf548578ef9830c0c1c0f0b/frameset.htm
    Regards,
    Lorcan.

  • How to add Portal iViews with Web Page Composer

    Hi,
    We are working with Web Page Composer in EP7.0 SP13.
    We are creating web pages and we would need to add Portal iViews into. When we try to add an iView, we cannot select it from Web Content Browser to drop into the web page container.
    How can we add iViews into our web pages?
    Helpful answers will be rewarded!!
    Thanks in advance,
    Samantha.

    Hi,
    See these:
    [http://help.sap.com/saphelp_nw70/helpdata/en/06/4776399abf4b73945acb8fb4f41473/frameset.htm]
    [/message/4414263#4414263 [original link is broken];
    Best regards,
    Avishai Zamir

  • Using Web Dynpro iViews in Web Page Composer

    Hi all,
    is it possible to add a Web Dynpro / Web Dynpro iView in a Web Page Composer page? I'm using NW7.0 EhP1.

    Hi,
    I believe, it is not possible to add webdynpro iviews in WPC.
    Check this help.
    http://help.sap.com/saphelp_nw70/helpdata/EN/06/4776399abf4b73945acb8fb4f41473/content.htm
    Good Luck!
    Sandeep Tudumu

  • Add Portal iView to Web Page in Web Page Composer

    I would like to add a Portal iView to a web page using Web Page Composer.  What are the steps to be able to do this?
    We are using NetWeaver 2004s with SP16.
    Thank you for your assistance.
    Alex

    Hi Le,
    I configured a Global Entry Point.  These are the steps:
    1.  Choose System Administration ® System Configuration ® Knowledge Management ® Content Management ® User Interface ® (Show Advanced Options) ® Mapping ® Component
    2.  Edit the wpcDragExplorerEntryPoints configuration object.
    In the Parameters field, you can enter the following properties:
    Property:  displaymode
    Description:  Specify select
    Property:  maxproviderprio
    Description:  Enter a value for the highest priority number that standard entry points can have and still be displayed in the Web content browser The priority of standard entry points is between 3 and 80. For a list of standard entry points and their priorities, see the configuration at Content Management ® Repository Managers ® Entry Point Providers ® Entry Point Provider.
    Property:  entriesperrow
    Description:  Number of entry points displayed in each row (default: 5)
    Property:  entrypointsprefix
    Description:  Prefix of the entry point repository.  If you specify a value for this parameter, standard KM entry points are also displayed in the Web content browser.  Default: /entrypoints
    Property:  sharedcontent
    Description:  Semicolon-separated list of paths to be displayed as global entry points for shared content
    Example of a complete specification in the Parameter field:
    displaymode=select,maxproviderprio=30,entriesperrow=5,sharedcontent=/wpccontent/Cross-Site Content;/documents/MyFolder
    Alex Zelinski

  • Showing Visual composer iviews within Web Page Composer (wpc)?

    I am able to integrate KM iviews from the PCD into my web page composer pages, but when I try showing Flex 2 iviews generated by Visual Composer the flash runs on top of everything else on the page. The flash is simply put at page coordinates 0 x 0 whatever page region you try to put it in.
    This is if iview isolation methold is set to embedded. If iview isolation method is set to URL then nothing is shown as the region is simply collapsed as if the content wasn't there.
    I know there is a limitation to using Web Dynpro iviews with WPC pages, but the documentation says nothing about Visual Composer iviews.
    Tips?
    Henning Strand

    Fixed by choosing fixed height for the iview (pcd config) and keeping isolation method set to URL.
    This is as opposed to integrating KM iviews (document lists) where isolation method should be set to embedded and height kept to automatic.
    Cheers
    Henning

  • How to add PCD iview in web page composer.

    I have created an KM navigation iview for user messages.I want to add this iview in web page composer.i tried creating entry point but not able to see any changes in web page composer designer.
    Regards,
    Atul Dumbre

    Hi,
    have you executed the steps outlined here?
    http://help.sap.com/saphelp_nw2004s/helpdata/en/06/4776399abf4b73945acb8fb4f41473/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/45/e58347f5546976e10000000a1553f6/content.htm
    Important steps are: "Deactivate the Hide in Root Folder checkbox." & "Restart the servlet engine."
    How did you configure the entry points provider? sharedcontent=/wpccontent/Cross-Site Content;/documents/MyFolder
    br,
    Tobias

  • How to drop iviews in web page composer?

    Hello,
    We are working with Web Page Composer in EP7.0 SP13. We want to drop an iview in the content panel but we are not able to create any iview in the Web Content Browser before.
    How can iviews been added as content in the web page?
    Could anyone help us?
    Thanks,
    Marta.

    Hi,
    See these:
    [http://help.sap.com/saphelp_nw70/helpdata/en/06/4776399abf4b73945acb8fb4f41473/frameset.htm]
    [/message/4414263#4414263 [original link is broken];
    Best regards,
    Avishai Zamir

  • Supported iViews in Web Page Composer

    Dear SDNites,
    We are planning to Web Page Composer at one of the client implementations. I wanted to know, is there any definite list of iviews supported with Web Page Composer.
    I tried to drop URL iView and WebDynpro iview but could not get them working within WPC framework.  Can you please guide me if I am missing any configuration or these iViews are not supported within WPC framework?
    Regards
    Pavan

    Hi Pavan,
    The place I could find today a reference about non supported iViews is in the [WPC Wiki|https://wiki.sdn.sap.com/wiki/display/KMC/WebPageComposer-FrequentlyAskedQuestions], under the section Functionality, and the link How does WPC integrate with the Portal Content Directory (PCD)?
    Hope this clarifies.
    Best Regards,
    Joseph

  • Web Page Composer WPC and Portal iView - Show Tray

    Does anyone know if it is possible to show the iview tray when dropping an iview into a WPC container?
    I added the "portal page" as an allowed object to drop into a container, but WPC does not allow Portal Pages inside a WPC page.
    I would like some kind of "title" on my iview to explain what it is showing.
    One other option is to use a custom java iview that just has some text label above my content.
    Thanks

    Hi Bertina,
    We encountered the same problem couple days back in our environment. There is a SAP note (# 1294833) which details the issue but affected version indicated in this note is different then what we are on so we decided to create a note for SAP.
    Below is SAP response for this issues
    13.09.2010 - 08:52:12 CET - Reply by SAP     
    Dear customer,
    I can confirm that the issue described in SAP Note 1294833 is indeed
    present in EP 7.01 SP4 and is the reason you are currently experiencing
    this problem.
    Unfortunately, as outlined in the note, there is no workaround
    available but our developers have advised me that the fix will be
    included in the next patch for KMC WEB PAGE COMPOSER 7.01 SP04.
    Hope this helps.

Maybe you are looking for