Placeholders have vanished, but work during playback

First time Keynote user.
I've placed some photos from the web onto placeholders- the images do not appear in any of the views, but do appear when I preview the presentation.
Any ideas about viewing the placeholder images so I can edit them?
Thanks in advance for your help.
Cheers,
Adam

I'm unsure what exactly causes the problem in the first place but the issue is resolved after I'd updated my software.

Similar Messages

Photo Stills look good on the timeline but awful during playback

Not sure what I did wrong. I'm doing a slideshow of photos and some of the photos look great during playback and some look pixelated. What is the reason behind this? I remember when I did a video the video clips were coming out blurry and I found a "trick" where I had to add a high resolution clip that would set the precedent for all other clips to keep them from being blurry. But this is with photos now so I'm not sure of any "tricks".
Any help appreciated. Thanks!

The best thing I have found to do, and it goes against everything in my being, is to use bing to do a search for "HD Photo of __________."

Apps have vanished - but not deleted???

Hello,
A few minutes ago I was grouping my apps into folders.
I moved my News folder back a couple of pages/screens - but it seems to have vanished!!!
However, when I do a search of the iPhone the apps are still there and working - they just do not appear on screen with the rest of the apps.
Cheers.

I resynced with iTunes and then I could see the folder... though I am now doubting whether it was actually really missing in the first place... but I did look through the apps several times!!!
Confusing, it is!!!

No sound during playback (but sound effects are working)

Was there a bad incremental update in the last 24 hours? Woke up this morning to find that my 2nd Gen Apple TV has gone mute. But only during playback of videos or music. The clicking sound effect during navigation comes through just fine. Tried this over HDMI and the Digital out, with both a receiver and directly to the tv. Also tried it with multiple apps so it isn't app specific. Hope Apple fixes this soon.

Sorry if I came off a bit testy. I use the Apple TV daily in my work environment for background noise and the issues totally derailed my workflow this morning.
So, I tried adjusting audio settings for both Dolby Digital and Audio Out. No luck.
Last resort time. Hardwired (USB cable) to my laptop and restored via iTunes. Success, audio fuctional across all apps. Not the best of solutions because of the time required to restore accounts for the various 3rd party apps on the Apple TV but it worked.
Guess I will never know what caused the 'no audio" issue though I suspect a bad/failed auto update. As convenient as that new feature is, it doesn't help when things go wrong.
A final note, beta software is supposed to be buggy, I undertstand. Production stuff isn't. I've been a loyal Apple user for 20+ years now because of their quality control. I've used competing products too and felt very annoyed at the lack of QC (looking at you Google TV). I would love to see quicker addressing of bugs on the Apple TV OS because a bad experience is what drives less-technical users away. It is a real game changer device if Apple were to even attempt to give it the level of support that other products get. Anyways, that's my soapbox moment.

Multi-room DVR Issues: Unable to locate hub, interrupted recording, skipping during playback

Hi Guys,
I was wonderng if you could help me. I have been a FIOS customer for many years and have a multi-room HD DVR and 2 HD set-top boxes. I have always had some problems during playback on some recordings where the picture and sound will skip, but over the last several months some new problems have appeared. Frequently during playback of recorded shows the recording will stop playing and I will get a message on the screen "unable to locate hub". I then have to power off the STB, reboot and when I go to the dvr option I have to refresh the devices before connecting to the dvr again. If this happens while a show is recording then the recording stops and then restarts causing the show to be split into 2 recordings. Sometimes I get a message "You have reached maximum playback on DVR". This really frustrating and I would like these issues resolved. I have the older HD dvr, 1 new hd set-top box, and 1 old hd stb. The playback issues happen on both hd stbs. We don't usually watch shows on the dvr itself so I am not sure how it performs during playback. 1 other note that might help troubleshooting is that I can't seem to display the IMG in full screen on the dvr.
Thanks in advance for your help,
Sincerely,
Randy R.

uncorrdinated wrote:
Hi Guys,
..I. Sometimes I get a message "You have reached maximum playback on DVR". This really frustrating and I would like these issues resolved. I have the older HD dvr, 1 new hd set-top box, and 1 old hd stb. The playback issues happen on both hd stbs. We don't usually watch shows on the dvr itself so I am not sure how it performs during playback. ..
Thanks in advance for your help,
Sincerely,
Randy R.
You can only do 1 playback at a time UNLESS you are playing back from the DVR/HUB. If you want to do 2 simultaneous play backs, one of them must be from the DVR. I ran into this same message when my wife would watch a recorded program in one room and I would try to watch a recorded program in another room. Fixed it by moving the DVR to one of the rooms where the conflict occured most often. As for the "unable to locate hub" message. This was a very common problem about a year ago, which was fixed with a software update. You need to check what version software is on all your boxes.

Some fields in ADF application are responding during playback

Hi All,
I'm facing some issues when playbacks the script which was recorded ADF application. Mainly 3 fields are showing this abnormal behavior. For combo-box `adf.table(..., .....).rowSelect(3);` is used to select value, but it's not working during playback. For date field the date picker I used is not working during playback. One Text field is also showing some issue. Value of text field is not get set during playback and it leaves it blank and passes the run. There are also other fields, including many Text fields, but all of them are working except the 3 above mentioned..
Please help me, if any one knows solution for this. Even if you don't know solution please share your ideas.
Regards,
Deepu

You give us no clue about what you used to record/playback scripts

HT2492 My Countdown Calendar Widget display has vanished but .....

My Countdown Calendar Widget display has vanished but works if I reboot off a back up external drive. What do I drag and drop and where are they located from the external drive to my Mac? Thanks.

Screenshot :- http://i.imgur.com/1Ac9l.jpg
Is there anything else?

My email addresses for iCloud have vanished

My email addresses for iCloud have vanished but I have not changed any settings. The only address option is my Apple ID one and it defaults to a none iCloud smtp address and the iCloud smtp is shown as offline?

Did you ever go through the migration process to switch your old MobileMe account to an iCloud account? If not, then I'm afraid it's too late to do that.

Some strings for which expression pedal is used is recorded well but during esch playback I have to move the modulation wheel. How can I resolve to hear my instrument during playback without twikking on the wheel !

Some strings for which expression pedal is used is recorded well but during esch playback I have to move the modulation wheel. How can I resolve to hear my instrument during playback without twikking on the wheel !

I am having the same problems. My guess is that a lot of people are having the same problems and just living with it. Those of us who know where to go on the Internet come here to find a fix.
It seems Verizon has some explaining to do. Maybe they should try Beta testing new software a little better. I would rather have to wait longer for something that works. I am sure that some manager or director said this is close enough, deploy it and we will see what happens. Well, you are seeing the problems. Time to fix your mistake.
All of us are telling our friends about the problems. The longer this goes on, the more people we will tell about it.
Wouldn't you rather us be telling our friends that their is an error in the new interface and that you are working hard to fix it?
If you want to be up front about this, then just tell us. We are adults and can handle it. If you made a mistake, own up to it and give us some credit for doing your Beta testing in the field.
Customer Service is all about telling the truth and if you made a mistake, admit it and lets move on with a fix. I do not want to be told again that I should be able to unplug it, power cycle it, try the on-board diagnostics, etc., etc.......
I am going to be repsonding on a daily basis to keep this topic at the top of the list.
Time to come clean. You will feel better Verizon.
Let's talk tomorrow.

My iphone 4 camera shutter won't open. I have already done a restore and I am using the latest iOS. The front facing camera works during FaceTime but crashes when I switch to rear camera. in Camera mode I can't switch to front camera.

My iphone 4 camera shutter won't open. I have already done a restore and I am using the latest iOS. The front facing camera works during FaceTime but crashes when I switch to rear camera. in Camera mode I can't switch to front camera. I plan on replacing this phone with an iphone 5s when it comes out but I need this phone to work until then.

When you did the restore, did you restore from a backup or restore as new? The final step of user troubleshooting is to restore as a new device, not from a backup. If you restore as a new device and the camera still does not function, it is probably a hardware issue. Make an appointment at the Apple Store Genius Bar and have the device checked by a Genius.

No sound while recording but I can hear during playback

I plugged my iRig HD in my macbook air (Yosemite), opened garage band and configure input output settings. While I was recording couldn't hear any sound but during playback I could hear clearly everything. I haven't got any problem on Amplitube 3. Is there any different settings on garage band?

What if I want to use mac's speakers or an external speaker
As long, as are not recording using the internal microphone it should work to change the output in the GarageBand Preferences > Audio to System Settings and to set the System Preferences > Audio > Output to the internal speakers or the internal output , if you have speakers plugged in instead of your headset.

Audio Mixer faders don't move during playback, but levels do change

Hi, I'm having this problem (FCP 6.06):
I've automated clip levels on my audio tracks with keyframes. Druing playback, all the audio mixing works fine, volumes go up and down like they are supposed to.
However, I wanted to watch it happen in the audio mixer. Expect, with the audio mixer open, none of the faders move, even though I can clearly hear the clips adjusting themselves properly.
If I stop the playback, and click around in the timeline, then the faders move to show the correct levels. But during playback, they will not move at all!
I tried changing the audio mixer Source menu, from auto, canvas, viewer, etc. No effect. I tried enableing the "Record audio keyframes" button, the downmix buttone, etc. No effect. Any ideas?

Hi,
I have the same problem.
I figured out, that the failure occures for sure if I speed up the video to > 1000%. The funny thing is that the video plays fine, only audio (musik track) stopps...
The audio track of the video (therefore also speed up to 1000%) is muted, and shouldn't be rendered, right? But if I delet this speeded up audioclip the problem is gone!
Another problem is the master-audiometer. It stopps working sometimes while audio is still playing. Changing the sequence and changing back again helps solving the problem for some minutes... boring.
What should we do?
I don't think that my pc is to slow. i7 980X, 24GB Ram, GTX 680, Raid0 SATA3, SSD.
Grüße
Johannes

[SOLVED] broadcom-wl works during install, but not after.

I have this macbook air which I'm beating into submission, and it has a broadcom wifi chip. I followed the instructions here for the installation and it worked perfectly. After booting into my newly installed system I do the same, but when I do 'modprobe wl' it fails with:
# modprobe --verbose wl
insmod /lib/modules/3.14.5-1-ARCH/extramodules/wl.ko.gz
modprobe: ERROR: could not insert 'wl': Invalid argument
I checked with 'lsmod' and none of the blacklisted modules are loaded. I have no idea how to proceed but it should work since it worked during installation. Any pointers would be greatly appreciated!
EDIT: As user Namarrgon on irc pointed out, I needed to rebuild the broadcom-wl package. The reason it worked in the live usb and not in the installed system is probably because the installed system had a later kernel than the one on the live usb.
Last edited by l4than-d3vers (2014-06-05 11:31:35)

At least for rt2870sta, it's a retarded bug in Linux that was introduced in 2.6.31 and is still not fixed. It works in the live environment because it has an older kernel.
Kernel 2.6.31 module conflicts
The 2.6.31 kernel caused the rt2870 driver to conflict with other wireless modules. The fix in this thread says that you need to blacklist the rt2800usb rt2x00usb and rt2x00lib modules by modifying the MODULES array in /etc/rc.conf
MODULES=( ... !rt2800usb !rt2x00usb !rt2x00lib ... )

HT1600 My apple tv stopped working during a movie. I tried to reload software .it deleted it, but won 't reload it.

My apple tv stopped working during a movie. I tried to reload software .it deleted it, but won 't reload it.

Welcome to the Apple Community Turbomedic.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    2.    Connect the micro USB cable to the Apple TV and to your computer.
    3.    Reconnect the power cable (only for Apple TV 3)
    4.    Open iTunes.
    5.    Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

PS CS6 Auto Recover??? Posted earlier but seems to have vanished

Hi... posted this earlier but the problem/question seems to have vanished... so, reposting.
Was asked to troubleshoot a Win 7 PS13 (CS6) crash today - first time to my knowledge PS has ever crashed! On restart, no Auto Recover option. All work lost. Did some checking.
Found two folders:
1. On the boot disk, found Users\xxxx...\....\AutoRecover
2. On the exclusive scratch disk - set on G: - found the folder G:\PSAutoRecover (as well as the PS temp file in the root of G:).
Both the AutoRecover folders were empty.
Set auto save time to 5 minutes... Rebooted. Restarted PS and created a new file - test01.psd. Saved it. Did some work, didn't save... kept checking... (played games for 15 mins). Checked. Both AutoRecover files remained empty.
Crashed the system (forced shutdown). Auto recover option and the test file was not showing up in the recent files list... opened the original test01.psd. No work subsequent to the original save showed up. Nor any recovery option. Did some more work on the file... just checked... both the AutoRecover folders are still empty.
(Just closed PS and saw that the PS temp file deleted itself. Both the AutoRecovery folders remain - empty.}
So, my questions are:
1. Is there a 'Permissions' attribute i need to set? Or...
2. Is the AutoRecover messed up? Or...
3. Is the installation messed up and should i advise a reinstallation?
TIA....

Neil...
Think you can somehow help... Have done the following, again today:
1. Uninstalled the entire CS Suite. This includes registry and folders
2. Ran the Adobe CS6 Cleanup tool - twice. Once for the entire suite and a second time for PS
3. Ran a registry clean up program
4. Did a Disk defragment - not really important, but still
5. Rebooted between various stages...
6. Reinstalled CS6 Master Collection minus some programs which are not needed such as Flash, AI 32 bit, etc. But installed both versions of PS
7. Validated using PS
8. Started - separately - both versions of PS. Set scratch to E drive (primary partition - 100GB) and Autorecover to 5 mins
9. Ran both versions of PS and opened and modified a file
In each case, the 'PSAutoRecover' folder was created on the scratch drive - E:\ alongwith the PS temp file. But the 'PSAutoRecover' folder never got populated.
Must be something unique to this system but can't figure out what. It can't be a permissions issue because both the scratch file and the autorecover folder are being created.
BTW... all Adobe entries in the config.sys startup are disabled - except for the Adobe CS6 Service Manager. But can't be those either as they are all related to updates, Acrobat, etc.
Yet, putting the primary scratch on C;\ solves the problem. However, as both Curt and you have tested, that should not be an issue...
(Have not been able to check on any other system as this is the only one that has CS6.)
System specs: Intel i5 processor, 12gb RAM, 64bit Win 7, P-55 USB3 Motherboard
Grateful for any suggestions / ideas...
Cheers...
S

Placeholders have vanished, but work during playback

Similar Messages

Maybe you are looking for