Places view as map not working- iPhoto 09

I'm not sure how long I've had this problem, but when I click on Places, the view as map screen is just gray. It works fine if I view as list. Does anyone have any suggestions to troubleshoot this problem?
Thanks!

Thanks!
Here is what I did to trouble shoot:
Checked to make sure my iPhoto was current
Checked settings to make sure they had not changed
Tested a second library (opened iPhoto while pressing Library) and saw the problem is with iPhoto, not my library
Removed receipts per this article: http://support.apple.com/kb/TS3249
Uninstalled and reinstalled iPhoto
Deleted the iPhoto cache in my Library
None of these worked
I looked at the post linked to above that said that Safari might be the problem, even though I never use Safari I first emptied the cache and deleted all cookies (though I think all you need to do is delete Google related cookies). This is working for now, hopefully it will continue to work.

Similar Messages

Street View (google maps) not working on Firefox with SNA

I have a problem with Firefox when trying to use Street View in Google Maps. It basically kills the browser by being extremely slow. Now, this happens only when using SNA acceleration (default), but not with UXA or GLAMOR (just removed on latest update or xf86-video-intel). Everything else works fast and good with SNA, including WebGL in Firefox. Moreover, with Chromium I don't have this issue: Street View works fine with SNA.
This is an Intel based laptop with Gen5 Intel graphics (and in case it matters, I use KDE desktop):
# cat /var/log/Xorg.0.log | grep SNA
[455944.801] (II) intel(0): SNA initialized with Ironlake (gen5) backend
Anyone else noticed this? Any idea of what can be the problem?

I have a problem with Firefox when trying to use Street View in Google Maps. It basically kills the browser by being extremely slow. Now, this happens only when using SNA acceleration (default), but not with UXA or GLAMOR (just removed on latest update or xf86-video-intel). Everything else works fast and good with SNA, including WebGL in Firefox. Moreover, with Chromium I don't have this issue: Street View works fine with SNA.
This is an Intel based laptop with Gen5 Intel graphics (and in case it matters, I use KDE desktop):
# cat /var/log/Xorg.0.log | grep SNA
[455944.801] (II) intel(0): SNA initialized with Ironlake (gen5) backend
Anyone else noticed this? Any idea of what can be the problem?

Apple maps not working on iMac

apple maps not working on iMac the little thing just keeps turning

Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.Maps.plist. Move the .plist to your desktop.
Restart the computer, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Alternate Access Mapping not working for Zone : Intranet

One of our client want to set Alternate Access Mappint (intranet) with url "intranet.theirDomain.com" with local IP address.
is it possible?
subsequest to my previous question (
http://social.technet.microsoft.com/Forums/sharepoint/en-US/3f39711e-301a-40e8-aa7a-855fa2c268b1/alternate-access-mapping-not-working?forum=sharepointadmin )
I want to ask one more question
Can we configure "intranet.theirDomain.com" with local IP address for any other zone?
or
If there is ".com" within the url then it can't be configured for InTRAnet?
Thanks
S H A J A N

The names for the zones don't matter. You could use the 'extranet' zone for another intranet name if you wanted, the names are just to make it a bit more friendly for beginners.
What you describe sounds routine, you create a web application with a name, then use an AAM to allow users to access it with a more friendly name. Frequently you end up creating
http://intranet.domain.com and
http://intranet as an AAM, or vice versa.
You can use .com for an intranet site, you would need to add the site as an A Host record in your DNS server so that traffic is sent to your internal server rather than out into the wider world.

Value mapping not working properly

Hi All,
I am using value mapping twice in same mapping program. But only 1 field is coming with value and other is taking same value from source payload, can you please tell me what can be issue here?
Value mapping 1 -
Context - http://sap.com/xi/XI
SenderParty- SenderSchema
ReceiverParty- ReceiverSchema
Value Mapping table in ID -
Value mapping at field 2 -
Context - http://sap.com/xi/XI
SenderParty1- SenderSchema1
ReceiverParty2- ReceiverSchema2
Value Mapping table in ID -
Source payload -
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_VM_Send xmlns:ns0="http://xyz.com/Rashmi_CollectPatternDemo">
   <Record>
      <Emp_ID>123</Emp_ID>
      <Name>rash</Name>
      <Surname>sumit</Surname>
      <Gender>Male</Gender>
     <Grade>E2</Grade>
</Record>
</ns0:MT_VM_Send>
Target Payload -
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_VM_Receiver xmlns:ns0="http://xyz.com/Rashmi_CollectPatternDemo">
<Record>
<Emp_ID>123</Emp_ID>
<Full_Name>rash sumit</Full_Name>
<Designation>E2</Designation>
<Gender>M</Gender>
<Travel_Mode>Train</Travel_Mode>
</Record>
</ns0:MT_VM_Receiver>
Here travel_mode is coming perfect, but designation is same as defined in source payload. Why here Value mapping not working???
Thanks & regards,
Rashmi Joshi

Hi Rashmi,
The problem would either be in cache update or your mapping. Please provide the sceenshot of mapping (after clicking the value mapping function).
you can also choose the option to throw error in value mapping function, so it will throw error when value not found.
regards,
Harish

Why Does Live View In DW Not Work With BC Template?

The live view using a BC template in DW CS6 shows "PAGE NOT FOUND" in the body section but the header and footer look fine. I should also point out that the index.htm page works fine, it's just the other pages that have this problem. What makes it weirder is that the site works fine in all other modes including when viewing in a normal browser, it's ONLY when in live view! I also noticed that if I delete the .htm extension in the url in the DW browser when in Live View it fixes the problem, but this requires me to do this everytime I want to switch to live view and surely is either a problem with how the BC template files are named or DW CS6 is buggy? Hopefully this is an easy one to answer??

Hi Alex,
Thanks for your reply, I have done a video demo at http://screencast.com/t/RsutrvoFn0xZ
Date: Thu, 14 Feb 2013 05:49:55 -0800
From: [email protected]
To: [email protected]
Subject: Why Does Live View In DW Not Work With BC Template?
    Re: Why Does Live View In DW Not Work With BC Template?
    created by Alex Pavelescu in Dreamweaver & Business Catalyst - View the full discussion
Hi, Please provide the site url, and if you can, a video demo of the issue you're facing, using http://www.techsmith.com/jing.html, where you could also display the way you have your side setup ( Dreamweaver menu > Site > Site manager > http://screencast.com/t/GqqBk9MY4ck ) Kind Regards,Alex
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5072585#5072585
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5072585#5072585
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5072585#5072585. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver & Business Catalyst by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Camera, Browser & Maps Not Working

Hi,
It been since yesterday my Z10 camera, broser & maps not working.
Whenever I click the camera icon, it is not even opening.
Browser icon had changed, it turned to a triangle square & circle.
Can anyone help me out.
Thanks,
Chris

The update may not have loaded properly, you can reload this way: http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB34045&sliceId=2&docType=kc&noCo...
Or do a Security Wipe (Reset to Factory Settings) this way:
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB33591&sliceId=2&docType=kc&noCo...
Please read both carefully !

How come the current view button does not work?

How come the current view button does not work?

Sorry, I have no idea what you are asking; please provide some details, and/or a screenshot if possible: https://forums.adobe.com/thread/1070933

Image Map not working in Dreamweaver CC

I'm trying to create an image map over a jpeg but when I try to draw a rectangle over the image, a grey stroke gets placed over the image then moves with the cursor.
Here is the only code on the page. Any ideas as to why this isn't working?
<img src="/SampleImage.jpg" alt="" width="900" height="2779" style="margin: 5px; width: 649px; height: 2000px;"/>

Let me see if I have this right...
1. From Design View, you are clicking your image to select it
2. You are then selecting the Rectangle tool from the bottom left of the Properties window
3. You are then clicking and dragging on the image in Design View to create your map area
4. DW puts a grey line around the image and moves it instead of adding the image map and area tags?
Run your page for code errors at http://validator.w3.org. I can't duplicate what you describe and DW will do strange things when code errors are present, it could be an error DW doesn't know how to fix that's causing the normal image map functionality to fail.
If you have clean code and are doing what I list above and it's still not working, it may be time to clear the program cache:Deleting a corrupted cache file

XSLT mapping not working b'coz " " & " " replaced with and

Hello Experts,
I have a RFC to JMS scenario. One of the parameter of RFC is a string field. This field will contain the XML data in it.
I need to create a complete XML payload using this data in a string field. For this I am using XSLT map :
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.1" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" >
     <xsl:output method="xml" omit-xml-declaration="no"/>
     <xsl:template match="/">
          <xsl:for-each select="//Nem">
               <xsl:copy-of select="."/>
          </xsl:for-each>
     </xsl:template>
</xsl:stylesheet>
This XSLT mapping works fine when tested independently.
But in actual scenario at runtime the "<" & ">" used to indicate a node are getting replaced with < and >. Then the XSLT mapping fails and produces no output.
The output of XSL will be passed in to a java mapping which signs the payload digitally.
What is the issue with these signs? How can I overcome this problem?
Any inputs will be of great help.
Kind Regards,
Abhijeet.
Edited by: Abhijeet Ambekar on May 4, 2010 2:01 PM

Hi Stefan,
Yes - I want to get rid of & # 60. But these (& # 60 and & # 62) are not added by XSLT mapping. Rather they are in the input available to XSLT map.
In sxmb_moni, i can see the inbound payload correctly :
<?xml version="1.0" encoding="UTF-8" ?>
- <rfc:HDK083_REFUS_SENDDOCU xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
<P_SIGN_DOCUMENT />
<P_XML_DOCUMENT><NemRefusionIndberetningSamling><NemRefusionIndberetningStruktur MessageID="1"><HeaderStruktur><SignOffIndikator>true</SignOffIndikator><TransaktionKode>Opret</TransaktionKode><IndberetningstypeKode>Anmeldelse</IndberetningstypeKode><FravaerTypeKode>Sygdom</FravaerTypeKode><FravaerendeStruktur><FravaerendeTypeKode>Loenmodtager</FravaerendeTypeKode><LoenUnderFravaerIndikator>false</LoenUnderFravaerIndikator></FravaerendeStruktur><IndberetningUUIDIdentifikator>bf9cc44e-af15-4e19-8457-5845d75385d2</IndberetningUUIDIdentifikator><ReferenceAttributTekst>ref. Nielsen-1503831372 (23. oktober 2009)</ReferenceAttributTekst>
but when I try to download the payload or right click on payload to view source I get something like below:
<?xml version="1.0" encoding="UTF-8"?><rfc:HDK083_REFUS_SENDDOCU xmlns:rfc="urn:sap-com:document:sap:rfc:functions"><P_SIGN_DOCUMENT></P_SIGN_DOCUMENT><P_XML_DOCUMENT>& # 6 0;NemRefusionIndberetningSamling& # 62; & # 60;NemRefusionIndberetningStruktur MessageID="1"& #62;& #60;HeaderStruktur& #62;& #60;SignOffIndikator& #62;true& #60;/SignOffIndikator& #62;& #60;TransaktionKode& #62;Opret& #60;/TransaktionKode& #62;& #60;IndberetningstypeKode& #62;Anmeldelse& #60;/IndberetningstypeKode& #62;& #60;FravaerTypeKode& #62;Sygdom& #60;/FravaerTypeKode& #62;& #60;FravaerendeStruktur& #62;& #60;FravaerendeTypeKode& #62;Loenmodtager</FravaerendeTypeKode><LoenUnderFravaerIndikator& #62;false</LoenUnderFravaerIndikator></FravaerendeStruktur& #62;<IndberetningUUIDIdentifikator& #62;bf9cc44e-af15-4e19-8457-5845d75385d2& #60;/IndberetningUUIDIdentifikator& #62;& #60;ReferenceAttributTekst& #62;ref. Nielsen-1503831372 (23. oktober 2009)& #60;/ReferenceAttributTekst& #62;
(extra spaces added to "& # 60" as browser was converting it to < ,>)
If i take the source code for payload and test XSLT mapping, it fails. But if I manually replace all "& # 60" with < and "& # 6 2" with >, then the mapping works fine.
So I think for XSLT map to work correctly, we need to replace all "& # 60 " . Please suggest.
Kind Regards,
Abhijeet.

Alternate Access Mapping not working

I am trying to configure alternate access mapping in sp2013.
My default url for site is https://intranet
My client has given a url https://intranet.theirDomain.com
When I ping "intranet.theirDomain.com" on their local machine it is returning IP: 192.168.0.87
When I ping "intranet", it is giving IP: 192.168.0.86
I have edited the Public Zone URL as follows
Default: https://intranet
Intranet: https://intranet.theirDomain.com
In IIS the following bindings are there.
https intranet 443 *
https intranet.theirDomain.com 443 *
But still https://intranet.theirDomain.com is not working
https://intranet is working.
I hope all are configured correctly.
Or doing any wrong? please guide me.
S H A J A N

It sounds like the 'intranet' A record in the theirDomain.com zone isn't pointed at the correct IP address (192.168.0.86).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Satellite view of map not available Nokia 5800

I have updated to the latest version of Nokia Maps. However, when I switch to satellite view, I do not get the satellite view. I have downloaded India map to my handset.
Sree

Hi Sreevalsan ..Exactly same problem i am facing...please tell me if you have any solution now...
i have one more problem exist that when i complete download india map everything is Ok and it shows that india map is in your phone but when i disconnect my mobile and reconnect my phone then it always shows to download india map..and also not shows the satelite view even i also download a low size country map which is zimbabwe and it works perfect with satelite view and also shows everytime map on phone when i connect my phone to computer .i am not understanding what to do please help anyone

Since iOS 4.2.1 Update - Document viewer Apps do not work right!

Before I updated to iOS 4.2.1 Air Sharing (Document Viewer) was working (so were all my Document Viewers), but currently, they do not work correctly. I have checked about three others...all have the following problems:
Since I updated (to iOS 4.2.1), all the documents open up to FULL SCREEN mode (which it had never done before, since the very beginning of the AppStore). Full Screen mode means that it looks like a Word Document on the computer, with the margins showing. This is rediculous for the screen of an iPhone or iPod Touch. There is no need to see the margins. Also, the font size is so small that it makes it almost impossible for most people without a magnifying glass. The document used to open up to a "zoomed in" view of the text. This allows the person using the application to actually read the text. This also allowed scrolling up and down easily. Now, with the new Full Screen view, to get the text large enough to see, you have to double tap (or spread your fingers on the screen to scale it big enough) on the text to read it. Then, when you scroll up and down, it sometimes scrolls side to side or diagonally (into the white margins), making reading cumbersome.
The other problem with the new view is that the font sizes are all messed up. The normal font (whether 9 pt. to 16 pt.) looks the same. The italic font looks bigger than the normal font, though it is the same point size. It skews the page and alters what the original documents looks like.
I have contacted the developer of Air Sharing to complain, but he said the following:
Hello,
Thank you for the test file. I do see what you're referring to. We use Apple's built-in Office viewer for Air Sharing. This means to display files like .docx ones, we use Apple's viewer. It's possible they changed their viewer in the most recent iOS update to cause this change. Because it's not our viewer we have no control over how it displays such files. Other apps using Apple's viewer will encounter the same issue. I wish there was more we could do on our end to help resolve this problem.
Cheers,
Elliot Chase
Avatron Software, Inc.
Please tell someone to fix this situation. I can provide you with information (and screen shots of before and after) to back up all my complaints. Thank you for listening.

Ah, so that could be a good search term.
Things get a bit more weird though. I was looking through the commands in the drop down menu and saw under "Archive" this: "Put/Send the Apps you bought to this computer" (rough translateion in English) So I tried that out.
I could only do that by going to "Store" and (**** how to say that in English) "Allow" this computer to do that. This is weird as this is the same computer that I have always used for anything to do with the iPhone! I have now 2 computers that are allowed to sync, and it is one machine. Beats me!
At a certain point the transfer proces stopped again and again I was requested to "empower" this computer again, as out of the 65 apps now 21 were not allowed to be transfered! That did not work. It now keeps telling me that I have 2 computers allowed for transferring apps and these last 21 can not be put in the library.
I am a bit at my wits end!
But really thanks for trying to help out! It seems that 4.2.1 has some real problems when reading through the discussions!
Cheers!

Type-mapping not working correctly, get "Unable to find a javaType for the xmlType" WARNING

I'm manually creating a web-services.xml file, and using the autogen ant task to
generate the codec XML/Java classes. The XML definition is provided by SAP.
The ant build.xml file:
<project name="buildWebservice" default="stubgen">
<target name="stubgen">
<clientgen ear="C:\projects\RMIS\ifrrequests\RMIS.ear"
packageName="com.aa.rmis.webservice.client"
clientJar="C:\projects\RMIS\ifrrequests\rmisws-client.jar"
autotype="False" />
</target>
<target name="all" depends="stubgen"/>
</project>
The problem is seen below in the output from Ant. Note the WARNINIG. The problem
is that the xml type cannot be mapped to the Java type.
C:\projects\RMIS\ifrrequests>ant -buildfile clientbuild.xml
Buildfile: clientbuild.xml
stubgen:
[clientgen] Generating client jar for RMIS.ear ...
[clientgen] WARNINIG: Unable to find a javaType for the xmlType:['urn:sap-com:do
cument:sap:business']:PaymentRequest.Create. Make sure that you have registered
this xml type in the type mapping
[clientgen] Using SOAPElement instead
[clientgen] Compiling 4 source files to C:\DOCUME~1\944377\LOCALS~1\Temp\rmisws-
client.jar-836624340
[clientgen] Building jar: C:\projects\RMIS\ifrrequests\rmisws-client.jar
BUILD SUCCESSFUL
Total time: 17 seconds
The Java source that has the implementation of the service methods is simply:
package com.aa.rmis.webservice;
import com.aa.rmis.ifr.request.*;
public class TestService
public TestService()
public int serviceRequest(PaymentRequestCreate request)
System.out.println("Received serviceRequest message");
return 0;
public void testStringRequest(String request)
The web-service.xml file is attached, which contains the schema for the SAP PaymentRequest.Create
object definition.
Another problem I have, which is probably related, is that the service method
that has a complex data type (non-built in data type) is not being deployed into
the WebLogic server. But the other service method that simply takes a String
parameter is.
The steps I took are:
1. Get XML from SAP Interface Repository (IFR) for PaymentRequest
2. Use ant task autogen to generate the request codec classes
3. Create the web-services.xml file by inserting the schema definition and the
mapping file created by the autogen task, and defining the operations
4. Build web-services.war file that contains all autogen compiled class files,
the web-services.xml file, and the service implementation class
5. Build the ear file that holds the web service files
6. Use the clientgen ant task to generate (included above) to generate the client
jar file that should contain the proxy for both of the service methods
Environment:
* WebLogic 7.02
* JDK 1.3.1_06
* JBuilder 9 Enterprise
* Ant 1.4
Possible causes:
* Namespace not being used correctly
* copied verbatim the mapping xml file generated by autogen into the web-services.xml
file
* xml-schema part of web-services.xml might not be set correctly
* operation definition might not be using the correct namespace
* Classpath used for ant might not be right
* Doubt this is the problem, but I'm out of other ideas
* Set by using the setWLEnv.cmd file provided by WebLogic
* Tried adding the generated classes directory for my project to the classpath,
but did not work
I've been referencing the Programming WebLogic Web Services document throughout
this entire process. I must be missing something.
Can anybody from BEA help me out with this problem?
Thanks in advance.
[web-services.xml]

Hi JD,
I spent a few cycles looking over your web-services.xml file, however I
don't have any suggestions other that one that looks like you have
already tried, at the top, in the <schema...>
targetNamespace="urn:sap-com:document:sap:business"
Making edits to these generated files can be tricky and my only
suggestion is to create a small reproducer to run by our outstanding
support team.
A quick look at our problem database shows one issue (CR095109) related
to a similar problem at deploy time that was fixed with 7.0SP3. Again,
the support folks will be able to help focus in on the issue.
Regards,
Bruce
JD wrote:
>
The first posting contains the wrong web-services.xml file. Please refer to this
one instead.
"JD" <[email protected]> wrote:
I'm manually creating a web-services.xml file, and using the autogen
ant task to
generate the codec XML/Java classes. The XML definition is provided
by SAP.
The ant build.xml file:
<project name="buildWebservice" default="stubgen">
<target name="stubgen">
<clientgen ear="C:\projects\RMIS\ifrrequests\RMIS.ear"
packageName="com.aa.rmis.webservice.client"
clientJar="C:\projects\RMIS\ifrrequests\rmisws-client.jar"
autotype="False" />
</target>
<target name="all" depends="stubgen"/>
</project>
The problem is seen below in the output from Ant. Note the WARNINIG.
The problem
is that the xml type cannot be mapped to the Java type.
C:\projects\RMIS\ifrrequests>ant -buildfile clientbuild.xml
Buildfile: clientbuild.xml
stubgen:
[clientgen] Generating client jar for RMIS.ear ...
[clientgen] WARNINIG: Unable to find a javaType for the xmlType:['urn:sap-com:do
cument:sap:business']:PaymentRequest.Create. Make sure that you have
registered
this xml type in the type mapping
[clientgen] Using SOAPElement instead
[clientgen] Compiling 4 source files to C:\DOCUME~1\944377\LOCALS~1\Temp\rmisws-
client.jar-836624340
[clientgen] Building jar: C:\projects\RMIS\ifrrequests\rmisws-client.jar
BUILD SUCCESSFUL
Total time: 17 seconds
The Java source that has the implementation of the service methods is
simply:
package com.aa.rmis.webservice;
import com.aa.rmis.ifr.request.*;
public class TestService
public TestService()
public int serviceRequest(PaymentRequestCreate request)
System.out.println("Received serviceRequest message");
return 0;
public void testStringRequest(String request)
The web-service.xml file is attached, which contains the schema for the
SAP PaymentRequest.Create
object definition.
Another problem I have, which is probably related, is that the service
method
that has a complex data type (non-built in data type) is not being deployed
into
the WebLogic server. But the other service method that simply takes
a String
parameter is.
The steps I took are:
1. Get XML from SAP Interface Repository (IFR) for PaymentRequest
2. Use ant task autogen to generate the request codec classes
3. Create the web-services.xml file by inserting the schema definition
and the
mapping file created by the autogen task, and defining the operations
4. Build web-services.war file that contains all autogen compiled class
files,
the web-services.xml file, and the service implementation class
5. Build the ear file that holds the web service files
6. Use the clientgen ant task to generate (included above) to generate
the client
jar file that should contain the proxy for both of the service methods
Environment:
* WebLogic 7.02
* JDK 1.3.1_06
* JBuilder 9 Enterprise
* Ant 1.4
Possible causes:
* Namespace not being used correctly
* copied verbatim the mapping xml file generated by autogen into
the web-services.xml
file
* xml-schema part of web-services.xml might not be set correctly
* operation definition might not be using the correct namespace
* Classpath used for ant might not be right
* Doubt this is the problem, but I'm out of other ideas
* Set by using the setWLEnv.cmd file provided by WebLogic
* Tried adding the generated classes directory for my project to
the classpath,
but did not work
I've been referencing the Programming WebLogic Web Services document
throughout
this entire process. I must be missing something.
Can anybody from BEA help me out with this problem?
Thanks in advance.
Name: web-services.xml
web-services.xml Type: ACT Project (text/xml)
Encoding: base64

Image maps not working in signatures (MS Exchange 2010)

I would like to know how to get the image maps links work in OWA 2010, it is working in all other email clients except OWA 2010

Hi,
This issue seems related to S/MIME control and IE.
Please perofrm latest updates for IE and S/MIME. More details as below:
1. OWA -> Options -> Settings -> S/MIME
2. If any security warnings appear, click Yes for the control to download and install.
Also try to add OWA web site into Compatibility View in IE.
Thanks
Mavis Huang
TechNet Community Support

Places view as map not working- iPhoto 09

Similar Messages

Maybe you are looking for