Placing  a 4x3 QT onto a 16 x 9 sequence without image shift /or RH crop

Hi, I am building a new 16x9 sequence with fresh background, and when I import a older 4x3 QT to place onto it, the 4x3 image shows up cropped on the right side, cutting off the ends of logos, etc. I am not trying to stretch the older 4x3 to 16x9. Just the actual placement onto the timeline causes the crop to show up. When viewed straight from desktop, the 4x3 QT looks fine, only when placed in the 16x9 sequence does the image shift / crop.
Any ideas?
Thanks.

Right click on the clip in the timeline and select 'remove attributes'
Has FCP added distort or crop? If so remove them and see if that corrects the problem

Similar Messages

  • How do I download all my photos onto an external hard drive intact without loosing iPhoto's features, important info and details? I need to delete pictures and files to make room in My mac's memory which is currently full.

    Hi
    How do I download all my photos onto an external hard drive intact without loosing iPhoto's features, important info and details? I need to delete pictures and files to make room in My mac's memory which is currently full.
    Maro

    So you want to move the iPhoto Library?
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • HT1848 How do i get the playlists from my iphone onto the itunes on my mac without deleting everything on my phone and starting again?

    How do I get the playlists on my iphone onto the itunes on my mac without deleting everything on my phone and starting again?

    Hi,
    Read this user tip Recover your iTunes library from your iPod or iOS device
    Does it help?
    Jim

  • How do I prevent Premiere from placing the scratch disk onto the 'same as project" folder

    I start a project by resetting the default scratch disc settings from “same as project” (which is on my “G” drive) to another hard drive where I have always stored defaults on CS3 (the “D” drive). I never had to redo my scratch disks when I created a new project in CS3. Now I need to redo them every time. If I open an older project in CS5 it automatically places all scratch disk files onto the G drive. How do I prevent Premiere from placing all scratch disk information onto the G drive before I open an older file? By the time I get around to changing the location, Premiere has already begun saving scratch disk information on the wrong disk.
    However I have another related problem. When I import an older project to nest it in a new project, the scratch discs mysteriously change back from the D drive where I set it up to the “G” drive. I finally discovered this when I reopen the project and all previews disappeared and it had defaulted back to the G drive.

    Thanks. Now I know that anytime I import a CS3 project file into a CS5 project, that it will change the whole project scratch disk settings to the default without warning. 
    One wouldn’t think that just one imported file would change the whole overall project file (out of many imported files…not project files that do not); it is odd that Premiere changes the setting of the new overall Cs5 project without warning.

  • To upload photos from my pc onto my ipad using a usb stick. I bought a camera connector kit and tried placing the usb stick onto one of the white square adaptors, stuck it into the ipad2 and I got 'the device uses too much power'' message. Pls help.

    I am not very familiar with the ipad2. I wished to transfer some photos from my pc (not an apple pc but that is the only one I have) to my ipad2 as I thought it would be easier to cull them, edit, crop etc to create albums for our recent trip (the photos are already on the pc and no longer on the camera memory card). When I place the usb stick on the adaptor and stick it onto the Ipad2 I keep getting 'device uses too much power/ requires too much power' message. I read somewhere on the internet that a usb hub could be used to solve the issue but that did not work either. What am I doing wrong? Is there actually a way around this problem. If not why does apple sell this product for Ipad users at all?
    Thank you for any help/ solution you can offer.
    Regards

    I'd ask that on the iPad forum.
    https://discussions.apple.com/community/ipad

  • Centered placing of a mc onto another via action script

    Hello,
    i have problems to place a mc object (any rectangle) centered
    onto another mc object (any rectangle) via as-code. Via the polar()
    method it is possible to translate points with a certain distance
    and angle. I tried with that method to place the first rectangle
    centered onto the second rectangle. It works fine for an angle of 0
    degrees for the second rectangle. But if you change the angle of
    the second rectangle the determination is no more correct.
    Can someone someone help me?
    You just have to create 2 rectangles as movieclips in a flash
    document and name them as "draggedObject" and "dropObjects". Then
    attach the following as-code and try out:
    draggedObject.x = dropObjects.x; // draggedObject is the red
    rectangle, dropObjects the blue rectangle
    draggedObject.y = dropObjects.y;
    var angle1 = dropObjects.rotation;
    angle1 = 2 * Math.PI * (angle1 / 360);// angle to Bogenmass
    draggedObject.rotation = dropObjects.rotation;
    var newPoint = Point.polar(dropObjects.width/2 -
    draggedObject.width/2, angle1);
    draggedObject.x = draggedObject.x + newPoint.x;
    draggedObject.y = draggedObject.y + newPoint.y;

    well, there are several ways to align objects on the stage.
    1) construct the objects so that thier registration points
    are in the center of the object, then either can be aligned to the
    center 0,0 of the other, and rotated about that point.
    2) if the objects registration point is in the upper left
    corner, use the Stage's width and height properties to align the
    obects to the center, by setting the _x position of the object by
    subtracting the width of the object from the width of the Stage and
    dividing the result by two. do this again each time you rotate an
    object, as the bounding box is changed to accomidate the entire
    bounds of the shape, after rotation occurs.
    AS2: draggedObject._x += (Stage.width - draggedObject._width)
    / 2;
    AS3: draggedObject.x += (stageWidth - draggedObject.width) /
    2;
    (I am uncertain if this is the correct method of calling of
    the AS3 'stageWidth' property here, as I'm new to AS3)
    3) there are more ways to accomplish this, but this should be
    enough for now.

  • Placing a picture file onto a graph

    Requirements is to "paste" a picture file into a graph such that appropriate lines can be drawn using the properties of a graph onto the image. Can this be done? If so, what format must the picture file be in (ie BMP, JPG etc)?

    You could paste the image on the front panel, importing a picture from file (sure about BMP, not about GIF and TIFF) and place your graph on it, making background transparent, so the picture will be shown under the lines you draw in the graph.
    Hope this helps

  • Placing text from Viewer onto a layer that has not been made yet?

    I have video in V2 and I want to place some text above it into a new layer, though that layer does not exist so I can not drag the v1 switch to target that layer. I end up having to drag the clip in the Timeline up to create a new layer, V3, then I drag it back down to V2 so I can drag the v1 switch to V3 and place the text from the Viewer into that layer.
    What is the right way to do this so I can go straight from the Viewer to the Canvas and into a new layer above the highest layer in the Timeline?
    Thanks!

    Close finish between Shane, Nick and me...
    Congrats Shane!
    to Stanwelks: now that I re-read the question I come to think of this:
    stanwelks wrote:
    ... I end up having to drag the clip in the Timeline up to create a new layer, V3, then I drag it back down to V2 so I can drag the v1 switch to V3 and place the text from the Viewer into that layer.
    If you'd just drag the Textclip from the Viewer directly to the Timeline. Drag it to where layer 3 would be and let go of the clip. V3 is created automatically. Regardless of the settings of the Tartget buttons.
    Rienk

  • How can i put music onto my iphone on another computer without having to delete everything off my computer?

    I want to download new music onto my iphone, but it will not let me. I have been doing it for the past year on my old desktop computer but recently brought a laptop and got rid of that. When i try to now sinc the music to my phone it is telling me my itunes library is on another computer and to download new music ifrom my laptop I must delete everything off my iphone. is there anyway i can download the music without having to delete everything of my iphone?

    If you do not have access to the iTunes Library on your Old computer... or its Backup...
    See these 2 Links...
    Syncing to a New Computer...
    https://discussions.apple.com/docs/DOC-3141
    Recovering your iTunes library from your iPod or iOS device
    https://discussions.apple.com/docs/DOC-3991
    If you do have access... See Here...
    iTunes: How to move your music to a new computer

  • IPhoto Library is Synced onto my iPhone can i retrieve the images from the library off my iPhone, as the library file has been deleted on my Macintosh.

    Dear All;
    I currently have a issue with my iPhoto & iPhone, i apologize if this is the incorrect area for assistance.
    My iPhoto library has been synced with my iphone all my images/photos are saved onto the phone, but i want to put them back onto my Mac, unfortunately my iphoto library has been deleted (actual file). is there any way to achieve this?
    i have tried syncing the photos but i believe it will delete them, and update with my current library (no images).
    i have also tried to take the images off via iphoto & image capture but they only take newly taken images not the photos in the old library stored on my iphone.
    i am using an iPhone 4S, Macbook Pro 2010 & current version of iPhoto.
    Please advise if there is any way to move an iphoto library from iphone to mac.
    Thanks & Kind Regards
    Jordan.

    Correct, you don't want to sync.
    There are various apps that will recover images from an iOS device.
    http://macupdate.com/app/mac/24832/ipod-access-photo
    is one, but there are others.
    Regards
    TD

  • Installing Firefox 4 onto mac os x "The following disk images couldn't be opened. Image: Firefox 4.0.dmg Reason: not recognized".

    I was trying to install Firefox 4 onto my mac os x but after I download it and click on the file to install it a window saying "The following disk images couldn't be opened. Image: Firefox 4.0.dmg Reason: not recognized". I have tried downloading it again but the same thing happens.

    No workie! mac os x 10.5.8

  • How can I move text onto the following line in CSS without making a new paragraph?

    Hello there,
    I want to do the follow:
    Name of company,
    Address of company 1,
    Address of company 2,
    Address of company 3,
    When I press enter to move the text underneath the previous text, it starts a new paragraph which I don't want. How can I simply get it to flow onto the next line without creating a new paragraph?
    Thanks so much in advance.

    You can use <br />
    <p>
    Address 01<br />
    Address 02<br />
    Address 03<br />
    </p>
    I'd probaly type it out in Code View but I think you can use shift+enter
    Martin

  • Can you download music straight onto your ipod nano 7th generation without the use of a computer?

    so can you download music straight onto an ipod nano without having to sync to a computer, i'm just wondering because my dad wants an ipod but just for music so there's no point him getting an ipod touch, and he doesn't own a computer so he wouldn't be able to sync. he doesn't live with me also so it would be a pain if he had to use my computer every time he wanted to add music to his ipod.
    thankssss

    No. Sorry. The only way to transfer the music to your ipod is through syncing in iTunes. Cheers!

  • I cannot erase alias JPeg images on a memory card so that it will not accept any more which I try to load onto it, yet there are no actual images available if I click on any of them. The error message states that one or more cannot

    Cannot delete aliases for JPeg images on a lumix camera memory card even selecting individual images anjd trying to move to trash -error35 one or more items cannot be found. No image available on clicking or if card put back into camera-"no images to disply" Yet if try to add more images, message that card is full! Any suggestions?

    Deleting from iPhoto or image capture after import should be fine and shouldn't cause any issues. Deleting from the folder view of finder, can cause issues as the camera can the image is still there. You can try emptying the trash on your mac if you deleted them via the finder, as although you've deleted it, it's only marked as trashed and not actually deleted until you empty the trash - ie it won't relieve the space taken by the files.
    If your still having issues after you try this, you may be best formating the memory card. This will wipe all data on it though, so make sure you do copy anything off that yo u want to keep! Format from the camera, so that choosing the format>erase all option from the menu of most cameras.

  • Is there any way to put music from itunes onto your 5th generation ipod touch without running iTunes 11?

    Hi everyone...hoping someone can help me!
    I have an older Macbook (I think 2008?) and I have Snow Leopard 6.8 but now the iTunes store is saying I cannot download Mountain Lion because my computer doesn't support it. I recently got a new iPod (the newest iPod touch) and would like to use it to actually listen to music as opposed to just using it for apps and Skype! Is there any way to get around this issue?
    Thanks for the help!

    iTunes 11 is compatible with Mac OS X 10.6.8, and that iPod touch model is compatible with iTunes 10.7.
    (84244)

Maybe you are looking for