Placing a call through the internet tablet

I am thinking of purchasing the 770 internet tablet. I also have a nokia N70. When the two are connected via bluetooth will I be able to place a regular call (not internet) to a contact?

Not using the 770 (note, that it has been replaced by the newer N800, so consider getting that, instead).
Message Edited by petrib on 23-Jan-2007
04:47 PM

Similar Messages

  • Placing a call through the internal módem

    Hello everyone. I'm using a D-Link BlueTooth dongle and a bt headset to speak through Skype but due to the fact that I have free national phone calls with my operator I don´t want to use Skype for regular calls. Instead, I want to use the internal modem. I remember the times where 14.4K was a huge speed and there where plenty of Window-based programs which let you use your computer as a fax or a phone, but it seems they're gone right now..., at least in OSX. I've found some programs running on Windows which lets yo do so, but none in OSX. As far as I know, Jon's PhoneTool dials the number, but does not act as an audio gateway. Is there any program with which I could use my bt headset to speak with people using my modem?. Thanks

    Take a look at Parliant's PhoneValet:
    http://www.parliant.com/phonevalet/?l=pptxt
    Using your Mac as a fax machine is built-in to Mac OS X 10.3 or 10.4. Just open your Print & Fax System Preferences to configure it.
    -Doug

  • Placing, and receiving calls through the iPhone's dock connector.

    Can calls be placed and received through the iPhone's dock connector?
    For example, assume you have a device, with two connectors, an iPhone dock, and a telephone jack. The device would allow you to connect a standard phone, cordless phone base station, fax machine, etc, and make calls using your iPhone cell service instead of you landline.

    No, that can not be done.

  • Windows XP activation through the internet

    Hello,
    I haven't used my Windows in quite a bit. I forgot whether I have or have not installed the drivers. I'd reckon I have... most probably. Either way, there's no way I could check it after the 30 day grace period is over... and I can't get into my Windows XP at all.
    So, I'm trying to activate it through the internet... but I can't. I thought the problem might be because I'm counting on a protected wireless connection... so I tried using cable, but my Windows also still says that there's no internet connection detected.
    Are these the only two workarounds to this problem:
    1. Call up Microsoft so I could activate my Windows.
    2. Reinstall Windows.
    Is there no way I can get internet detection at all, at this juncture?
    Thank you.

    Mulia:
    I believe that you may not have installed the drivers. Did the internet ever work with your windows installation? If yes then you installed the drivers. If you never checked or it never worked then you may not have installed them.
    Regardless of that, if you have an authentic Windows product then you can make a 10 minute or less call to Microsoft and get your WIndows activated. This will allow you back on the Windows desktop and then you can install the drivers and get on the internet. Without the installation of the drivers the internet connection will not work.
    Axel F.

  • How to connect to an other computer through the internet

    Please who can help me with Desktop Remote control and connecting through the internet. I know a lot is written about it, but it is still confusing.
    So try to explain my situation:
    I have an MacBook pro with Desktop Remote Control 3
    The other computer:
    Apple PowerBook which is connected through and Thomson Speedtouch (wireless 716)
    External IP address xx.xx.xx.xx
    Internal IP address 192.168.1.66
    No firewalls
    My questions:
    How do I check if my Thomson Speedtouch the ports 5900 and 32?? are open?
    How can I open the ports on the router? Do I have to open the port on the router?
    Then on the MacBook Pro, I start up ARD3
    How do I scan for the computer on Internet? Do I use the external IP address?
    How can I then connect to the Apple PowerBook? I cannot fill in the second internal IP address or do I?
    I hope someone can help me.
    If more info is needed, please ask me.
    Thank you....
    Hans

    Neil thank you for your answer.
    I opened Network Utility. Went to the last Tab "Port Scan"
    I typed in: external IP address (i got this through the Widget SysStat which shows external IP)
    Than I gave up scan between the ports 5890 - 5910 to check if those ports are open or not. I had to way for a moment, and then the result was: "Port Scan has completed....."
    Ok, what do I know know? The ports are open or not?
    So please can someone help me with the following:
    1) What should the result show me from Network utility?
    2) Opening the port, this has to be done on the Router or is it something the Internet Service Provider needs to do?
    3) I still have the question: how can I open the port, so with what application.
    4) What are the exact ports which needs to be open?
    5) About bridging in the router, does that have a special name. I didn't see in the router configuration program an option like that? When searching --> this is configured: A. Router-modem (NAT/PAT) - is there something special with NAT/PAT?
    Hope someone can help me with a few of my questions.
    Thanks

  • Hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!

    hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
    iv unistalled flash, iv checked plug ins it just wont work,

    It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
    (If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
    * Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here:  http://kb2.adobe.com/cps/142/tn_14266.html  and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here:  http://kb2.adobe.com/cps/838/cpsid_83808.html
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
    After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
    When you have installed the latest version of Flash, relaunch Safari and test.
    If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
    click Check Now. Quit and relaunch your browser.
    You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
    Use the FULL installer for 12.0.0.44:  Flash Player 12 (Mac OS X)
    And the instructons are here: Snow Leopard Clean Install.pdf
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
    Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

  • I am traveling in Chile, South America. I purchased an Entel sym card and I can make and receive phone calls, but the internet only works on WiFi. Do I need to region unlock or what? I willl only be here for A month and a half so I don't want to buy a pho

    I am traveling in Chile, South America. I purchased an Entel sym card and I can make and receive phone calls, but the internet only works on WiFi. Do I need to region unlock or what? I willl only be here for A month and a half so I don't want to buy a phone. Any suggestions?

    Most of the current Apple Intel based computers are comparable in CPU speed. I don't think it is so much the model of laptop as it is the memory, and storage capacity of the machine. If you are going to use FCP on a regular basis, perhaps as a professional or semi-professional, then you should think about the maximum memory and a very large capacity internal disk drive. For instance, one hour of finished compressed video will take up about 1.5 to 2Gbytes of disk space. If you add up the raw footage and still imagery and audio, you'll use up your disk drive capacity real quick. So a hard disk on the order of 750Gbytes @ 7200rpms might be good for video editing. 5400RPMs might be slow to rendering times. Rendering a video might take up a lot of memory so more memory is better e.g. 8Gbytes.
    As a rule of thumb, once you get to about 80% of your disk drive or memory you'll see degradation of performance.
    You can check out macsales.com. THey have a menu system that will allow you to pick and choose from various alternatives. BTW, it's been said that although Macs are typically spec'd at a certain memory size, macsales.com found that Apple computers will actually support higher memory levels. That is, if 4Gbytes are spec'd, some machines support 6Gbytes. macsales.com will provide the guidance for you.
    You might also consider buying an external disk e.g. 500Gbytes to carry around with you for back-up or transport to another machine.

  • Why can't I open/see PDF files that are embedded in an email or sent through the internet?

    I can read/see PDF files that are attached to an email, but I can't see/read them if they are embedded in an email or sent through the internet.

    I have a similar problem. I can open, read, and save PDF files, but I can't view my online bank statement on my Mac. The statement opens automatically if I use a PC, but on my Mac the page says I need Adobe Reader to view my statement. I already have the latest version of Adobe Reader. The problem seems to be that that the plugin only goes to the Libray. It doesn't get installed into Safari or into FireFox either.

  • Accessing my home network through the internet?

    Is it possible to access my home network through the internet via my AirPort Express? I would like to have full access to my Mac Mini's hard drive from my MacBook while at work.

    Yes. You will need to enable file sharing on your Mac Mini (via Sharing in System Preferences) and then you will need to port forward all your ports (since I don't know exactly what file sharing method you will be using) of your Mac Mini via the AirPort Utility.

  • Streaming advertisements to TV-screens through the internett

    Hi,
    I am currently opening up a shop. In this shop we have 6 different TV-screens, which will run all of our advertisements and offers.
    These 6 screens is split up in the following way: 2 in front, 4 on top.
    The two first are going to show the same images/advertisements, so will the top 4. 
    My question is if Adobe has any programs can run and distribute/stream these images to the TV-screens through the internet? Does Adobe Primetime work this way for instance? And why is it not included in Creative Cloud?
    In advance, Thanks!

    This has nothing to do with Adobe. You need a suitable video splitter hardware.
    Mylenium

  • TS3276 I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights.

    I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights. This started after I disabled ICloud. I had to disable ICloud as I was not receiving all my mail.

    I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights. This started after I disabled ICloud. I had to disable ICloud as I was not receiving all my mail.

  • Can i connect to the database through the internet

    hi all
    i installed a database oracle 8i enterprise edition on a pc that exists in a town far from me . i wonder can i connect to this database through the internet from my house
    please i need a answer
    thanks in advance

    You can connect from an Oracle client to any Oracle database in the world that meets certain requirements.
    First you need an open network connection between the two points so either no firewall exists between the two stations or the firewall(s) have been configured to allow Oranet traffic. This means both databases must have access to the Internet and certain ports are open.
    Second you will need the IP address and port for the remote listener, which in turn must be up and running on the target server.
    Then you must have the Service Name or SID and a valid username/password combination for the target database. Plus the username must have create session privilege.
    That should be about it.
    HTH -- Mark D Powell --

  • Why can I only hear my calls through the speaker?

    Why can I only hear my calls through the speaker?

    Because your receiver may not be working anymore. Use http://support.apple.com/kb/TS1630 to troubleshoot this

  • I would like to call through the CIS UCPM API but following error occurred

    I would like to call through the CIS UCPM API but following error occurred, I would like to to set Loacle Chinese, how can I do? Thank you
    intradoc.common.ServiceException: !csUnableToRetrieveSearchResults!csLocaleNotFound,English-US
    at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplem
    entor.java:2115)
    at intradoc.server.Service.buildServiceException(Service.java:2326)
    at intradoc.server.Service.createServiceExceptionEx(Service.java:2320)
    at intradoc.server.Service.createServiceException(Service.java:2315)
    at intradoc.server.ServiceHttpImplementor.determineParameterizedLocale(ServiceHttpImple
    mentor.java:668)
    at intradoc.server.ServiceHttpImplementor.initLocale(ServiceHttpImplementor.java:467)
    at intradoc.server.Service.initLocale(Service.java:426)
    at intradoc.server.Service.initDelegatedObjects(Service.java:295)
    at intradoc.server.SearchService.initDelegatedObjects(SearchService.java:86)
    at intradoc.server.ServiceManager.processCommand(ServiceManager.java:436)
    at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
    at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImp
    l.java:545)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    I managed to find a solution to my problem described above. I downloaded a demo copy of the shareware called R-Tools which I found on Tucows.com
    The site described the software thus: "Take advantage of R-Studio's unique ability to recover files and disks on remote computers, even if their partition structures are damaged or deleted."
    The demo software searched my ipod and found all my photos and showed them as thumbnails. Of course the demo software would not save the files unless I registered it which cost US$49.95. There are several different suites of applications from this publisher, I got the cheapest option which is called "R-Studio FAT".
    I didn't mind paying this amount because the photos were very precious to me and by this point I had just about resigned myself to losing them all. I had previously contacted a professional data recovery service and they had quoted me "AUD$80 per hour and probably 1 to 2 hours work".
    I've been too busy organising my newly recovered photos into galleries and editing them using photoshop to be bothered to try and fix my ipod which I doubt I will want to use again for photo storage.

  • Is it possible to upgrade my powerMAC G5 running OS X 10.5.8 to OS X 10.6 or higher through the internet?

    Is it possible to upgrade my powerMAC G5 running OS X 10.5.8 to OS X 10.6 or higher through the internet, via download, or without having to purchase any new hardware?

    Sorry, no. A Power PC can not be upgraded beyond 10.5.8

Maybe you are looking for

  • HT1277 How can I add a second email account to my "Mail" tab on iMac?

    All I have managed to do is add a Smartmail box, but that just specifies folders in my yahoo. I want to check my google email using the same icon. Setting both up on my iPhone was super simple, but for the life of me I can't figure it out on my mac.

  • WAK1  ----    How to send Free Goods details  to POS

    Gurus,   I have created the free goods data and everything works fine. When I create a whole sales order , I am getting the free goods. Now I want to send the information to POS . Can anyone help me how to send this I tried WPMA , but nothing is work

  • VideoPlayer complete event firing early

    I'm not sure why this is happening, but for some reason the complete event is firing about 5-10 seconds into my minutes long video. Here is the code for the VideoPage that loads the video and listens for the events. Does anything seem off to anyone?

  • How to Debug an ABAP Program

    Hi Friends, I am new to ABAP. Can anyone of you let me how to debug an ABAP program in detail. I would like to know whether my logic is working properly and see the field values during debugging. If any one of you have an How to document which speaks

  • HT4743 Game of Thrones- why grayed out in iTunes?

    Any ideas?