Placing an Illustrator file from a newer version into an older version of InDesign

Is posible to place an Illustrator file from a recent version (like Illustrator CS6) into an older version of InDesign (like InDesign CS5)?. I don't have the software right now to test it so I want to be sure.

Should be fine.

Similar Messages

  • When placing a Illustrator file in Indesign, the Illustrator file sometime changes from 100%.

    When placing a Illustrator file in Indesign, the Illustrator file sometime changes from 100%. When you select the placed file with the selection tool, it says 100%, but if you select with the direction tool, file has been changed any where from 98 to 102 %, not staying at the 100%? why is this and how can you asure the size does not change when placed or when updating the illustrator link?

    Probably you have inserted files in a frame whose content was previously adequate with "Fit Content Proportionally" or "Fill Frame Proportionally".
    The new content in the same frame will have the same characteristics as the previous one

  • Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a

    Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there are no updates

    Hi,
    CS6
    Van: R_Kelly [email protected]
    Verzonden: maandag 16 september 2013 18:42
    Aan: Hans van Sloten
    Onderwerp: Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a
    Re: Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a
    created by R_Kelly <http://forums.adobe.com/people/R_Kelly>  in Photoshop for Beginners - View the full discussion <http://forums.adobe.com/message/5686078#5686078

  • Do I have to buy a new version of Photoshop Elements (have Elements 10) just to upload RAW files from my new Olympus E-M10?

    I have Photoshop Elements 10.  It appears that I need a plugin to upload RAW files and the plugin necessary for my new Olympus E-M10 is not compatible with version 10.  Am I getting this right?  Do I have to buy a new version of Photoshop Elements just to upload RAW files from my new Olympus E-M10?  Otherwise, what I have is all that I need.

    Which operating system are you using?
    If your using mac os x 10.6 (snow leopard) or windows xp or vista, then the below solution will not work and you shouldn't try to install the dng converter 8.5
    You could use the free Adobe DNG Converter to convert your files to dng copies which should then open in pse 10.
    windows:
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.5
    mac:
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.5
    how to use the dng converter
    Camera Raw: How to use Adobe DNG Converter - YouTube

  • I have PS CS5. It does not recognize .CR2 files from my new Canon PowerShot SX50HS camera. Can I update my CR plugin? To what version? Where can I get it?

    I have PS CS5. It does not recognize .CR2 files from my new Canon PowerShot SX50HS camera. Can I update my CR plugin? To what version? Where can I get it?

    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    Mylenium

  • If I install dng converter version 8.3 so I can read raw files from my new sony a7 camera, will I still be able to read raw files from my canon 5d ?

    if I install dng converter version 8.3 so I can read raw files from my new sony a7 camera, will I still be able to read raw files from my canon 5d ?

    Ok. That explains 8.3. I know some want to stay with 10.6 because they have software or hardware that won't work on anything later.
    Gene

  • Raw files from the new Nikon D810 will not open with either Photoshop CS5.1 or Lightroom 4.  When will a real Adobe solution be available to work with Raw (NEF) files in their native format, using CS5.1 and LR4?

    Raw files from the new Nikon D810 will not open with either Photoshop CS5.1 or Lightroom 4.  When will a real Adobe solution be available to work with Raw (NEF) files in their native format, using CS5.1 and LR4?

    Clarification: this is a user forum; you are not addressing Adobe here.
    The answer to your question as phrased is: never.
    CS5 is history and it is not longer supported.  There will not be any updates or bug fixes for CS5.
    You need to convert the raw NEF files from your D810 to raw DNGs using the free, standalone Adobe DNG Converter 8.6 RC (beta), the first version ever to support that camera.. 

  • Placing an illustrator file with "white" objects add process black to PDF

    Ran into this problem today with InDesign CS5:
    I am trying to create a document with only one (spot) color, pantone 293 in this case.
    Placed some illustrator files in this document, all of them also only contain pantone 293. However, they also contain some "white" objects. Now my problem appears to be that "white" in illustrator is defined as "0% gray" by default. So when I export my document as PDF from inDesign, i get a PDF with both spot color pantone 293 and black. Strange thing is, I tried making the "white" objects 0% pantone 293 instead of 0% gray, but the PDF still exports with black process color.
    Just plain telling my printing company to ignore the black process color altogether would be foolish i guess, since there are objects underneath the illustrator files which need to be knocked out by the "white".
    Any ideas?

    If the problem isn't a profile conflict as Peter suggests, you might try setting up a preflight profile for 1 spot color that will catch uses of CMYK black. When you export a PDF from ID the CMYK channels always exist in the exported PDF, so you may need a preflight check to make sure CMYK plates are empty.
    This allows only 1 spot color, defined as Lab. Any use of black would throw an error:
    Here the white box is defined as Paper 0|0|0|0 CMYK and I get an error
    Defining the box as 0% Orange is OK

  • I can't open the RAW files from my new Nikon D4s camera in photoshop? How do I download the latest software for RAW files?

    I can't open the RAW files from my new Nikon D4s camera in photoshop? How do I download the latest software for RAW files? Cheers!

    What version of Photoshop are you running?  You will need at CS5, CS6, CC or CC2014.  Each version needs a different ACR-plug-in to open files from that camera.
    If you are on CS4 or earlier, you'll need to upgrade—or, in the alternative; look for, download, instal, launch and run the free, stand-alone DNG Converter 8.6 on each file of raw NEF files to convert them to raw DNGs first so you can open them in your version of Photoshop and ACR plug-in higher than 2.4.

  • Elements 10 will not read RAW files from my new Lumix G5

    All my RAW files taken with Lumix G1 are fine but the RAW files from my new camera (Lumix G5) won't open. What should I do?
    Looking at help in E10, it says ACR is version 6.7.0.339
    Elements 10 is version 10.0 (20110831.m.17215)
    Any ideas?

    You need at least ACR 7.2 for those raw files, and ACR 7 is not compatible with PSE 10. So you have three choices:
    1. Upgrade to PSE 11 (not the mac app store version, which is stuck at 7.1). If you are considering this, I would wait a month or so, since Adobe historically releases a new version every Sept/Oct.
    2. Use the panasonic software (silky pics?) to convert the raw files and send the resulting images to PSE for further processing.
    3. Download the free adobe DNG converter, which can create DNG files that are compatible with your version of ACR.

  • Old Illustrator file, revised to new, saved to pdf, reverting back to old Illustrator file

    After making a new Illustrator file from an old one, then saving it as a pdf, the new Illustrator file reverts back to old one. I have been using the pdf to make the Illustrator file again (luckily I've saved it as editable) but I don't always want to add this extra procedure. Does anyone have this issue or any clues on how this happens and how to fix the problem?

    when you made your changes and then saved as, you saved your changes to a new file. your original file closes without saving and the open file in illustrator is the new one (in your case the PDF).
    evertime you save as you are making a new file without affecting the old file.
    you should first save your changes and then save as. but after the save as, the opened file will no longer be the original file.
    if you do a Save As Copy. then you will be saving a new file which will be closed and your original file will remain open.

  • Problem opening Illustrator files from Bridge

    I recently installed cs5.5 and can no longer open my Illustrator files from within Bridge.  When I double click on the file in Bridge, it switches to Illustrator and the hour glass appears for about 5-10 seconds before switching back to the selector tool, but the file never opens???  The only way I can open Illustrator files now, is to do the File>Open command within Illustrator. 
    I'm hesitant to reinstall CS5.5 because it took so long the first time. 
    Any suggestions??
    Thanks
    Paul

    It only seems to affect ai files.  I am able to open psd files from Bridge.
    I just discovered that I am also unable to "place" ai files in InDesign.  The same thing happens - I go to File>Place, find the ai file, double click the ai file, the hour glass appears for a brief moment then disappears, but the file doesn't get placed.
    Thanks for any suggestions.
    Paul

  • I have Elements 9 and cannot download NEF files from my new Nikon1 v1, any help appreciated

    I have Elements 0 and cannot download NEF files from my new Nikon1 V1, any help is appreciated.

    PSE 9 is too old for any of the versions of ACR that support the 1 V1. You have three options:
    1. Upgrade to PSE 10 or 11.
    2. Use the Nikon software to convert the raw files and send the resulting tiffs to PSE for further editing.
    3. Try the free Adobe DNG converter, and you should be able to open the resulting DNGs in your version of ACR.
    Windows:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5486
    Mac:
    http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh

  • Why is my Photoshop CS3 not recognizing my NEF file from my new Nikon D7100, but will recognize NEF's from my old Nikon D90?

    Help... Why is my Photoshop CS3 not recognizing my NEF file from my new Nikon D7100, but will recognize NEF's from my old Nikon D90?

    Because many of the camera makers slightly alter their versions of their raw format whenever they release a new camera model.
    Nikon does it, Canon does it, and also several other camera makers.
    There is not a single version of NEF that all Nikon cameras use, nor a single version of CR2 for all Canon models.
    Here is a list of supported cameras and the required ACR plugin needed to open the raw files.
    Camera Raw plug-in | Supported cameras
    Versions of ACR are specific to each version of Photoshop.
    Older versions of PS cannot use the latest version of ACR.
    You need to download the latest version of Adobe DNG Converter.
    This will convert your newer 7100 files to DNGs that can then be opened in older versions like CS3.
    Be aware DNG only works on folders of files, not individual files. Select the FOLDER not a single file

  • Cs5  RAW files from my new nikon D600

    is there a cs5 camera RAW update so that i can open my RAW files from my new nikon D600

    No. RAW support is version specific. Refer to this:
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    You might consider upgrading to CS6. In the menatime you can always use the free DNG converter.
    Mylenium

Maybe you are looking for

  • Unable to print book - error with page info

    I'm trying to print a 50 page book. No problem assembling, uploading or purchasing but after a day or two I always get the following message from the Apple store. Due to an error when your order was submitted, the file we received contains incorrect

  • FSL-06002  Error 193 during Database Instance

    Hello, I am getting FSL-06002  Error 193 on step 29 (Update Database Statistics) of database instance. Please Advice. Thank You. ERROR 2008-01-01 15:34:55 FSL-06002  Error 193 (Unknown, try 'net helpmsg <Nr>') in execution of a 'CreateProcess' functi

  • CS 6 layer opacity issue

    In the middle of working on a file my layer opacity started acting weird. If I reduce the opacity to 90% it looks like I have dropped it by 60%. This happened on the file i was working on but when I opened a new file and filled a box with solid black

  • Form/layout for Consignment Stock Credit Note

    could anyone advice, the form name/layout for Consignment Stock Credit Note. Thanks in advance...

  • Background color shows through table color in firefox

    Hello, I am new to Dreamweaver and i am using CS3 and doing the cafe townsend tutorial. I make the background color balck and the table color a brick red, but in firefox the background color is showing through the table color, but in safari it shows