Placing images and ignore tiff orientation 1

Is there a way to ignore tiff orientation in an images exif data when placing an image?
I'm noticing that certain images when placed are automatically rotated. When I view their thumbnails they are the correct orientation, but when they are placed in my ID document they are rotated 90deg. The only exif data that looks like it could be affecting this is <tiff:Orientation>1</tiff:Orientation>.

Thanks for the reply Bob.
The solutions posted on the supplied link are the same as I have used to correct the issue on a case-by-case scenario. Perhaps I should have stated all reasoning for disabling the camera's original orientation. I have a plug-in that auto generates final pdfs based on an indesign document. The plugin populates image fields with images specified by a csv files. We have 50,000+ images and growing, and I have no knowledge of which images are going to be used for the final pdf, others are selecting the images. In the image preview there is no indication of camera orientation that would alter the rotation once placed in the indesign document.
My original question was if there was a way to ignore the orientation specified by an image, thus not needing to manually scan each pdf then fix the orientation issue and recreate the pdf.
Any idea if there is a way to disable indesigns automatic camera orientation detection?
Thanks again,
ALWebmaster

Similar Messages

I have corrected the orientation of all my photos on my PC. iTunes changes the order and ignores the orientation correction on just one founder" why?

I have corrected the orientation of all my photos on my PC. iTunes changes the order and ignores the orientation correction on just one founder" why?

See this thread...
tt2

Placing Images and PPI issues

Hello, I am new to InDesign.. I am a digital artist who has only used PS in the past, so I'm used to manipulating images however I like concerning PPI, DPI, and pixels. I am now creating an app for ipad use and created the background images for the pages in PS. Now, I'm placing them into ID. When I do that, no matter what I have the file saved as, it converts the image to a different ppi.
When I created the images in PS, I used the standard ipad resolution (262px) and dimensions. When I created the ID file, I used the standard ipad dimensions and the ppi is obviously much lower, at 72?
Is there a way to set the ID resolution, or do I need to create my documents with only 72ppi? This doesn't seem like it would give the best image viewing available on the ipad.
Thank you!

InDesign respects the original size and resolution of images, as long as you keep them at 100% of the original size. When they are at 100%, the "Actual ppi" and "Effective ppi" fields of the Info panel display the same value. In your specific case, the Info panel needs to show "262" in both fields. If not, it means that the respective image is scaled. To verify its scale, click the image using the Direct Selection Tool (the "white arrow" one) and look at the percentage fields in the Control Panel. (By the way, the resolution of the retina iPads is 264 ppi, not 262.)
When importing an image, the easiest way to assure that it will be placed at 100% is simply clicking the loaded cursor instead of dragging it. Give it a try.
But bear in mind that this "ppi" issue only matters for print publications. For tablet apps, what is important is the number of pixels; the resolution is irrelevant. For retina iPads, you need to use twice the size you use in a standard screen iPad. So, if you want a full-page image in an old iPad, the image dimensions must be 1024 by 768 pixels. If you want the same image in full screen on a retina iPad, create it with 2048 by 1536 pixels. You'll get a better explanation here: http://www.planetquark.com/2012/03/14/132-ppi-72-dpi-264-ppi-what-image-resolution-should- you-use-the-for-new-ipad/#.UhdbsLwWFL8

Bridge CS5 Output Module only uses first 20 images and ignores the rest

This happens with all the different styles, both PDF and Web. Even though more than 20 images are selected, only 20 show up both in the preview and in the final PDF or web page. It just started happening.

It just started happening.
This always means First Aid for Bridge, that is first to purge cache for
folder using the menu tools/cache/purge cache for folder while having the
content window pointed to the folder the problem occurs.
Second option is renew preferences by holding down option key while
restarting bridge and choose refresh preferences. Try again and if OK set
prefs again to your wishes to see if it still works.

Odd pause in Ai2014 when selecting placed image

So as I’m working in AI2014, Im noticing a rather annoying glitch. Every time I select a placed image (.psd, .eps, .tiff, etc) there is a long pause when the ‘rainbow spinning wheel’ comes up for a few seconds to a few minutes. Not sure what AI is doing but it’s really annoying. (it also will crash from time to time or lock up for so long that I have to force quit it.
Last night I closed my Links tab and I noticed that the pause wasn’t happening…. what is it about having the links panel open that effects my performance?? I must mention that this WAS NOT the case in CC and 6.
Any dev have any workaround? (and no, keeping the links panel closed isn't really a good option)

Maybe -- with regard to sharing. I had modified the file since this problem came up (by removing the underlying type in photoshop) so I need to see if I still have an original to share.
One other note. I had gotten the ad from a co-worker who had set it up. One mistake in my original post is that the black box placed over the underlying type was 100% K and not a 4-color black.
In order to share, how do I get you the file(s) and do you want both the PDF and InDesign/Photoshop files?

How do I place an image and insert a different photo for the "mouse down" state?

I have placed an image within an accordian widget and when I select the "mouse down" area in the states dialog box, i click "fill" in the toolbar and insert the photo i want to display when the image is clicked but this image is "covered up" by the originally placed image and is not seen in my states dialog box.
I have done this before when i made rectangles and placed images in rectangles. But i soon realized that you cannot add alternative text to images in rectangles for some frustrating reason.
How do I place and image and have a different image for the mouse down state?

Hello,
This effect can only be achieved when you use the images as a Rectangle Fill. And as you mentioned it above, you cannot add alternative text to images because it is added as a fill and not as a image.
I would suggest you to post this as a feature request on our "Ideas for features in Adobe Muse" section of the forums : http://forums.adobe.com/community/muse/ideas
Regards,
Sachin

Brush on placed image

Is it possible to apply a pattern brush to a placed image in Illustrator?

Illustrator cannot directly edit the pixels in a placed image. You can draw anything possible above a placed image and adjust its transparency and opacity settings, so perhaps that is all you are after.
If you want Photoshop-like editing of the raster date in a placed image, you will need a raster image editor like… Photoshop. You could draw out your desired artwork in Illustrator, then hide or delete the placed image and place that .ai file into Photoshop on its own layer, rasterize it, and edit it as pixels.

Is it possible to add keywords, title tags, and alt tags to lightbox images and/or triggers?

I am building a mobile site that is pretty heavily dependant on lighbox displays for the scroll capability. The issue I have run into is that I need to be able to add alt and title tags to the images in the lightbox (slideshow) to maintain the seo of my site. I have only designed a few of the pages thus far, and the issue I am running across is that once an image is considered a "trigger" by muse I can no longer add the seo elements in the same way I can when it's an image.
A few ways around this I found are:
1) export the site to Dreamweaver and then I can go in to the code and add the seo for the images in the lighbox on the backend.
2) I can build the site image by image and then over lay each trigger for the lighbox slideshow.
The issue with #1 is that once I export my site to dreamweaver it is then no longer editable in muse. I see this presenting a huge problem as I move forward with new iterations of my website. Any changes made in dreamweaver are not transferable to muse and thus creating two seperate sites. That means I would need to recreate any and all seo built in every time I update the site. This is not really an option and is not efficien at all. Is there a way to jump back and forth between these two products that I am unaware of? That would be most helpful.
The issue with #2: I have built each project page on the site as mostly large background images with triggers over laid. I did this to try and lower the overall gerth of the site, but it is seeming I am not going to be able to get around this and maintain the seo i am looking for.
Has any one run into this problem and solved it?
Here is the site thus far:
ghatest.businesscatalyst.com
Thank you for your feedback!

Placed images and slideshow images support tooltips (the "title" attribute) and alt text via the "Edit Image Properties..." content menu.
Strictly speaking, background images (fill images) in HTML do not support these tags. That said, in some contexts it may make sense for Muse to enable setting these attributes on an arbitrary object (which may, or may not, have a fill image).

Reading only Image Files from a Directory and ignoring the rest

i am wanting to be able to read a directory but only obtain the Image files (ie, gif, jpeg, tiff, png etc) and ignore all other type of files.
i have made a custom ImageFIlter class which extends FileFilter which works for adding a photo singly, as only image files are shown in the JFileChooser. however i am wanting to add a folder of photos at once.
here is the code so far:
File dir;
                    JFileChooser fc = new JFileChooser();
                    fc.setFileSelectionMode(JFileChooser.DIRECTORIES_ONLY);
                    //Handle open button action.
                    int returnVal = fc.showOpenDialog(MainAppGUI.this);
                    if (returnVal == JFileChooser.APPROVE_OPTION) {
                         dir = fc.getSelectedFile();
                         if (dir.isDirectory()) {
                              File[] files = dir.listFiles(new ImageFilter());
                              for (int i = 0; i < files.length; i++) {
                                   if (files.isFile()) {
                                        try {
                                             Photo PhotoAdded = workingCollection.addManyPhotos(files[i], canvas.getChangedMaxDim());
                                             //need to also add it to the relevant vectors, ie
                                             //for mouse over operations, or photos added after
                                             //save.
                                             if(!workingCollection.isDuplicate()){
                                                  photosToCheck.add(photoAdded);
                                                  canvas.addToGrid(photoAdded);
                                                  photosAddedAfterLoad.add(photoAdded);
                                                  canvas.repaint();
                                             else{
                                                  //do nothing as it is already in the vectors.
                                        } catch (Exception er) {
                                             // Do nothing. Bad mp3, don't add.
                                   // recurse through directories
                                   else {
                         } else {
                              try {
                                   throw new IOException(
                                             "Error loading files from a directory: "
                                                       + dir.getAbsolutePath() + " is not a "
                                                       + "directory");
                              } catch (IOException e1) {
                                   // TODO Auto-generated catch block
                                   e1.printStackTrace();
any ideas?

I'm confused.
You already ARE using a FileFilter to only pick up image files. Whats the problem?
If you need to recurse directories you need to change your code only a little.
Write your method
JFileChooser fc = new JFileChooser();
fc.setFileSelectionMode(JFileChooser.DIRECTORIES_ONLY);
//Handle open button action.
int returnVal = fc.showOpenDialog(MainAppGUI.this);
if (returnVal == JFileChooser.APPROVE_OPTION) {
dir = fc.getSelectedFile();
if (dir.isDirectory()) {
scanDirectory(dir);
else{
// not a directory
public void scanDirectoryForPhotos(File directory){
// taking your code
if (dir.isDirectory()) {
File[] files = dir.listFiles(new ImageFilter());
for (int i = 0; i < files.length; i++) {
    if (files.isFile()) {
// details deleted
// recurse through directories
else {
scanDirectory(files[i]);
Your exception handling is a little strange. You throw an exception only to catch it immediately to print a stack trace? Not exactly the most common handling I've seen. You should probably just throw the exception and let the next level down handle it.
Cheers,
evnafets

Placed Image Size and Quality Difference

Hi Everyone,
I'm running Adobe Indesign cs6 Version 8.01
I have a document that is 2048px x 1536px (for iPad Retina display Resolution).
I reszied all my images to be roughly 1140px x 760px at 300PPI
When I place the images in Indesign it Resizes the image to 272px x 180px
The effective pixels are and actual pixels are 300PPI at the resolution I resized them in photoshop according to the links section
The quality of preview is set to High Quality
In the preferences under File Handling Preserve Image Dimensions when Relinking is on
I tried saving the image in Jpeg, Tiff, and PNG formats to solve the problem
I set my default object style to Place Gun Frame and make sure Auto-fit is checked and Content Fitting is set to None.
What can be done to rememdy this problem?
I just want the images I resized in Photoshop CS6 to be placed in the exact dimensions as I resized them to make placing files simple and easy.
If you can please help with this problem as soon as possible I would greatly appreciate it.
Thank you so much

Hi Peter,
Thank you for your quick Reply.
I saved it at 72ppi and the appearance changed to the actual PX dimensions specifed.
Hope Adobe can fix this glitch to adapt display the image using the Pixel dimensions and not the image dimensions (size in inches or points).
Thank you so much.

How to find out the Pixel Dimensions and Document Size of placed images?

Is it possible to find out the placed image details like Pixel Dimensions(Width,Height) Document Size(Width,Height) in illustrator through scripting. Kindly advice me with some examples.

http://www.adobeforums.com/webx/.3bbaa316.59b84fd8
I hope the snippet therein will get you started.
But after all, when you place an image via pi=layer.placedItems.add() it should pop in with its default dimensions, so that you have pi.height and pi.width ready.
Is this what you are aiming at?

SCRIPT TO IMPORT MULTIPLE PLACED IMAGES..AND OUTPUT MULTIPLE IMAGES TO SINGLE PDF.

Anyone got a script to import multiple placed images into CS4? or is this possible in CS5?
and can we output multiple layers into a single PDF in illustrator? Or multiple layers into single JPEGS from illustrator with one command instead of individually saving out each page... would be a huge time saver for me.
Currently I output each completed layer individually and then right click those outputted jpegs in their output folder and choose "combine supported files into acrobat..." to make a single acrobat file..
I`d also like to be able to CTRL click multiple layers and go save as... only those layers get saved out...
And so adding something in the Save for PDF output dialogue box to save layers to multiple pages would be a helpful time saver..

In CS 4 and CS 5 you can drag and drop fro m the finder or the Bridge, and I guess any other similar type viewer, multiple number of image files to a document. You can configure the bridge in such a way as to allow you to see the Bridge and your document at the same time for this very purpose.
If you just drag and drop the files are linked if you drag while holding the shift key then the files will be embedded.
ID and PS CS 5 have a minibridge which works the sam way but is an actually panel and will stay in the front.
I separate the images but they import one on top of another.

Newly placed images not showing up and Text Styles not previewing correctly

I was playing around with defining new text styles and they
looked OK in Dreamweaver but when previewed in browser everything
was in Times. I deleted all the pre-set styles trying to fix the
problem out why when I realized now newly placed images don't show
up in preview, but old images will. I can copy and paste an
existing image and it will show, but not if I place it new. When
trying to Manage Site, I kept getting a "Home page is not on
this...." message. Please help me figure out what I have
done!!!

>Home page is not on this...
Several possibilities spring to mind the first of which is
you haven't
defined your site properly or at all
>previewed in browser everything was in Times
a link to your stylesheet has an incorrect path
>realized now newly placed images don't show up in
preview,
they should, defined site again?
If you have a URL we could see the code?
If not can you post the code here, otherwise these are all
guesses
Jo
"chas0616" <[email protected]> wrote in
message
news:esa2uh$h4d$[email protected]..
>I was playing around with defining new text styles and
they looked OK in
> Dreamweaver but when previewed in browser everything was
in Times. I
> deleted
> all the pre-set styles trying to fix the problem out why
when I realized
> now
> newly placed images don't show up in preview, but old
images will. I can
> copy
> and paste an existing image and it will show, but not if
I place it new.
> When
> trying to Manage Site, I kept getting a "Home page is
not on this...."
> message.
> Please help me figure out what I have done!!!
>

Reading 8kb tiff image and then writing into backend. please help

Hi All, Please Help ..
My aim is to read a tiff image which of 8kb 1732x717 size, and then store it into backend.
what I did is read the image into bufferedImage and then used tiffencodeparam with compression_none but the problem is size is too much after encoding.
code sample
BufferedImage image = ImageIO.read(tiff_filename); to read tiff image
to write tiff image
TiffEncodeParam p = new TiffEncodeParam();
p.setCompression(TiffEncdeParam.COMPRESSION_NONE);
FileOutputStream out = new FIleOutputStream(tiff_filename);
ImageEncoder e = ImageCodec.createImageEncoder(""TIFF,out,p);
e.encode(image);
out.close();

I got all my pictures AND everything else back, folders, ratings, keywords etc
Fortunately I had a backup of the entire iPhoto library folder, it was about 3 months old (I know shame on me) so I didn't want to just use the entire backup folder and lose 3 months of photos.
So I just copied the AlbumData.xml file and the Library6.iPhoto file. PRESTO all my pictures were back WITH all the folders,keywords etc, etc intact!! (up till the 3 month old backup point).
Then I just re-imported the missing 3 months worth of pictures from the original folder in the iphoto library folder. So all I had to recreate was 3 months worth of customization. WHEW!!
Reading through the discussions it seems there is a fair number of users where iPhoto would go empty, but they knew the images were still on the computer. I am not a programmer, but it seems silly to me the their are files that get re-written everytime iPhoto closes....computers crash. and then what happens to the files? Mine got corrupted, lesson learned BACKUP more frequently!!
Thanks to Old Toad who steered me to the Library6.iPhoto as a possible troublemaker in another thread!

Placing OS image and Data image on right partition

Hi ,
We are facing issue in placing right image at the right partition.
We have OS image and data image. We are formatting and partitioning HDD as 40% (OSDisk) and remaining 100% as (Data). Both paritioons are active and selected as primary.
Then in installing operating system step, i have selected place image based on variable 'OSDisk'
and Data image is also slected to be placed based on variable 'Data'.
TS finishes without any issues but when i login to the machine i can see that OSDisk has become 'D' Drive and Data Drive has become 'C' so it shows C drive with label as 'Data' and D drive is label as 'OSDisk'
I want to place OS on C drive and Data drive should always be as 'D' drive.
I have tried another method and this time i tried to install OS as 'place based on stored variable i.e. OSDisk but install data image as next available partition but with this placement OS never boot after restart and TS eventually fails.
My aim is to make 'C' drive contain OS image and 'D' Drive to containg data image content and not the otherway around as it is happening with current test.
Any suggestions will be highly appreciated. Thanks.
Regards,

Hi ,
Yes it is Config manager 2012 R2 but image is actually not source media install.wim. It a custom captured image through MDT2013. Image has 1 partition only.
However I tried the above solution but drive letters are still not coming correct for OSDisk and Data Drive. Data is coming on 'C' drive and OSDisk is coming at 'D' drive.
Regards,

Placing images and ignore tiff orientation 1

Similar Messages

Maybe you are looking for