Placing images problem

I don't know if it's related at all but since the last update to Yosemite, images added to folders won't show up while using the Place command. The only thing that I found that will make that file show up is to quit Illustrator and then re-open the file. That is not normal.
Any clues as to what's going on here?

That's probable I don't have a mac so I would not know how the drivers are updated. In this case, you could either wait for another update or go to Apple's site and report the issue so they can be aware of it and then hope an update will be sooner than later.
Other than that if you can figure out how to do a system information report it should tell you who makes the video card. Then you might be able to figure out how to update the driver yourself directly from the manufacturer of that video card. Or at least you should be able to.
Again all I can do is guess. Sorry about that.

Similar Messages

Placed Image problem solved

Both my colleague and I had problems with Adobe Illustrator CS5:
Problem:
1) AI refuses to "Place" external images.
2) Any existing AI documents with extant placed images now refuses to show them. The bounding boxes are there, but no images.
Solution:
Delete or remove the "FontExplorer X for Illustrator CS5.aip" plugin from the Adobe Illustrator > Plug-ins folder and all will be fine again.

Geoff,
Thank you for sharing.
There has been another report of FontExplorer disturbing Illy recently.
We shall try to remember.

InDesign CS 4 - Placing image problem

In InDesign CS 4, when I select 'place' from the file menu and choose an image, the cursor is loaded; I can either click once on the document to place the entire image, or I can click and drag the cursor to place the image.
Clicking and dragging the loaded cursor automatically resizes the image to the size of the box created by dragging. This is a problem. In CS 3, this did not happen. Is this a preference that can be turned off, or is this a bug?
Thanks,

Clicking will put it at 100% with the upper left corner exactly where you click, just as if you clicked and dragged down and to the right in CS3, the only difference being that dragging a frame in CS3 might have cropped an image, or left a frame with empty space. In CS4 you get the whole image by clicking, as in CS3.
Holding the Shift key while dragging in CS4 releases the shape constraint and sets the fitting property to fit to frame proportionally and centers the image (which probably isn't too helpful), and if you have smart dimensions turned on your operators can always watch the numbers to see when they've reached 100%.
I don't recall a way to get back the ability to drag a frame with the loaded cursor and place a cropped image at 100%, but you can pre-draw the frame(s) and then issue the place command, dropping into the frames and they will be placed at 100%.
Peter

Problem with photoshop automatically resizing placed images

Hi,
I have PS6. I have images that are 144x100 px. When I use file>place ps resizes the image to 108x75. I can't figure out how to make ps quit resizing my pictures. Anybody know?
Thanks

When Pasting, Dragging, copying and placing an image Photoshop will copy all of the image being duplicated original pixels to preserve the image pixel quality the image quality. If the receiving document has a different DPI resolution the image may look a different size in the receiving documents because of the number of pixels added to the document that has a lower or higher dpi resolution. If the image is being placed in if the image pixels exceeds the receiving documents canvas size. Photoshop may scale the smart object layer to fit within the canvas that depends on the users Photoshop's preference. All of the images original pixels are still there in the embedded object. In my Photoshop Collage Scripts I always transform all placed images to 100% size incase Photoshop scaled the placed image. For you can not get the scale percent Photoshop used. Once I know I have the image at 100% size I can use the layer bounds to get the actual number of pixels there are in the placed image. Once I know that I can calculate the scale I need to use to resize the image to fit the area being populated in the collage template. Once resized I center it into place and mask off any excess image pixels.

Placed image scaling problem

Hello,
just need one advice from the gurus out here.
i have placed few images in adobe indesign , now after placing image in indesign if i scale the image to 102 or 103 or 105% will it effect printing quality in offset printing ??? i mean i am increasing the size by 1% or 2% or 4% will it effect printing ? becuase scaling in photoshop is going to take lot of time because i have 1500 different products and all have different scaling issue so i thought of scaling bit more in indesign itself, please advice.
regds
Chako

If you know what line screen you're printers is using then you can calculate your minimum PPI.
The general rule has been to multiply the LPI x 2 = ppi | Which a lot of people take to assume that the LPI will be 150 in most cases, and that's where the 300 ppi for images originates.
But in truth different mediums would use different line screens, like newspapers, magazines, high-end art books etc. And the x 2 rule is a safe play, but it really should be 1.41 (or 1.5 to keep it simple).
Newspapers generally at 85 - 105 lpi
127.5ppi to 157.5 ppi
Magazines generally around 133 - 150 lpi (some high end magazines may even use 175lpi)
199.5 ppi to 225 ppi
Art books - high end printing etc around 175 - 200 lpi.
262.5 - 300 ppi
But as a rule of thumb it's best to keep your print images at 300 ppi for printing - but you can go lower, check with your printers as to what they recommend if you really need an image to go below 300 ppi for printing.
But the next time your printer tells you that your images are 250ppi and not good enough for printing you tell him that his halftone cells are rotated 45 degrees and that a2 + b2 = c2

Add Strokes to Placed Images in Illustrator

Hi All,
I'm having a problem to add a stroke "frame" around my tiff image in Illustrator. My image is a "traced picture" from Photoshop. I used the following technique:-
Technique: Use an Effect
Choose File > Place and select an image to place into Illustrator document.
Choose File > Place and select an image to place into Illustrator document.
The image is selected. Open Appearance panel and from the Appearance panel flyout menu, choose Add New Stroke.
With the Stroke highlighted in the Appearance panel, choose Effect > Path > Outline Object.
However, the result I got was the stroke around the image NOT the frame around the image.
How do I achieve it. Any help and tips are greatly appreciated. Thanks in advance.

Technique #1: Use a Mask
This technique requires Illustrator CS3 and works only when your keyline will be rectangular in shape.
Choose File > Place and choose an image to place into your Illustrator document. You can either Link or Embed the image. Once you've chosen the image, click the Place button.
The image is selected (if your image already exists in your document, select it now), so if you look in your Control panel at the top of the screen, you'll see a button labeled "MASK". Click on it. This creates a mask at the exact bounds of the image.
Press the "D" key for Default. This gives the mask a black 1 pt stroke attribute. Adjust the stroke per your design needs.
NOTE: An additional benefit to this method of using a mask is that you now have the elements in place to simulate a "frame and image" paradigm like InDesign. Once you've created your mask, you can decide to "crop" your image by double clicking anywhere on the photo. This will put you into Isolation Mode. Now click on the frame edge and resize at will. When you're done, double click outside the image to exit isolation mode and continue working. This method works wonderfully when you're using the Selection tool (black arrow) and have the Bounding Box option turned on (in the View menu).
Technique #2: Use an Effect
At first, it may seem that applying a keyline with the use of an Effect is a tedious process. But we all know that once we've applied an effect, we can store it as a Graphic Style, at which point applying our keyline will become a single click. Go ahead, ask me why Adobe doesn't ship Illustrator with such an effect as a default setting in the NDPs (New Document Profiles). Go ahead, ask me why Adobe doesn't allow us to assign keyboard shortcuts to styles like InDesign does. I don't have answers to either of those questions (sorry). But let's get on with the styles, shall we?
There are two separate effects that we can use, and each provides a different benefit.
Choose File > Place and select an image to place into your Illustrator document. You can either Link or Embed the image. Once you've chosen the image, click the Place button.
The image is selected (or if your image already exists in your document, select it). Open your Appearance panel and from the Appearance panel flyout menu, choose Add New Stroke. We can't see the stroke yet, because all we have is an image. But we'll change that in short order.
With the Stroke highlighted in the Appearance panel, choose Effect > Convert to Shape > Rectangle. Check the Preview button, select the Relative option, and set both the Extra Width and Extra Height to zero (0). (Be careful not to press Tab after you enter the second value, or it will switch back to Absolute.) Click OK to apply the effect. Style the stroke attribute to match your design preference.
Now make this easier to apply in the future. With the object still selected, open the Graphic Styles panel and click the New Graphic Style button at the bottom of the panel. Give the style an appropriate name. If you then add this style to your NDPs, it will be readily available in all new files that you create.
Add Strokes to Placed Images in Illustrator | CreativePro.com

My InDesign program is printing my placed images lighter than illustrator.

I am trying to print a colour logo in Indesign with black type on my inkjet printer. The colours are appearing fine on screen and so is the black but when I print everything is washed out. I tried just printing a black box and it appears black on screen but in print it is grey. I have tried changing the preferences Appearance of Black to rich and accurate but that did not make a difference. Do I need to do anything in color management I am using Indesign CS2. How can I solve this problem?

Acrobat worked, thanks for that advice. I set my Convert to Profile under the Edit Menu to Color
Match RGB. That helped a little bit but it is not printing like the
pdf. I would like to get this problem resolved. I normally use
illustrator most of my work. But I would like to have InDesign working
properly as I need it to do other jobs.
Take Care,
Jen
Take Care,
Jen
Date: Fri, 14 Aug 2009 14:24:47 -0600
From: [email protected]
To: [email protected]
Subject: My InDesign program is printing my placed images lighter than illustrator.
Jen,
This is a problem that you have no time to fool with, correct?
When printing from InDesign and all looks hopeless, export to PDF and print from the PDF.
Why?
I don't know for sure but it seems all printers made recently accept PDF better than straight from InDesign. It could be the printer driver and it could be InDesign but you don't have time to mess with it now. Wait for some free time to sort it out, but for now output to PDF and print from Adobe Reader or Acrobat.
>

InDesign Crashes while placing images on document.

Hi All,
I am facing problem and i am stuck at this point.
I download an image in a folder and place it in graphic box using IImportExportFacade's ImportAndLoadPlaceGun method it is working fine, but when i delete placed image from folder then it becomes as missing link after that if I download the same image at same path and try to place in another graphic box using same above API then indesign get crashed.
What is problem Any idea?
Please help me if anyone having same isuue i need to fix it urget.
Thanks in advance.
Regards
Tahir.

Does it happen in other files withthe same image(s)? How about in a new user?

Newly placed images not showing up and Text Styles not previewing correctly

I was playing around with defining new text styles and they
looked OK in Dreamweaver but when previewed in browser everything
was in Times. I deleted all the pre-set styles trying to fix the
problem out why when I realized now newly placed images don't show
up in preview, but old images will. I can copy and paste an
existing image and it will show, but not if I place it new. When
trying to Manage Site, I kept getting a "Home page is not on
this...." message. Please help me figure out what I have
done!!!

>Home page is not on this...
Several possibilities spring to mind the first of which is
you haven't
defined your site properly or at all
>previewed in browser everything was in Times
a link to your stylesheet has an incorrect path
>realized now newly placed images don't show up in
preview,
they should, defined site again?
If you have a URL we could see the code?
If not can you post the code here, otherwise these are all
guesses
Jo
"chas0616" <[email protected]> wrote in
message
news:esa2uh$h4d$[email protected]..
>I was playing around with defining new text styles and
they looked OK in
> Dreamweaver but when previewed in browser everything was
in Times. I
> deleted
> all the pre-set styles trying to fix the problem out why
when I realized
> now
> newly placed images don't show up in preview, but old
images will. I can
> copy
> and paste an existing image and it will show, but not if
I place it new.
> When
> trying to Manage Site, I kept getting a "Home page is
not on this...."
> message.
> Please help me figure out what I have done!!!
>

Strange stiching white lines in placed images...

Hi,
I'm having some problems with Illustrator CS2.
When i place a .PSD file (1 layer, photo, transparent background) with 300 dpi / CMYK 8bit into my main page, i get these strange stitching white lines over the image.
Not only that, but after working on my arrangement some more, if i click my placed image, i notice how Illustrator has sliced it into 2 or more parts..
This is annoying, since getting those white stitching lines doesn't really make me safe for print, and also bothers me that Illustrator slices the image into 2 or more parts without asking or confirmation.
Anyone knows how i can fix this problem?
Thanks,
John

Hi,
I'm having some problems with Illustrator CS2.
When i place a .PSD file (1 layer, photo, transparent background) with 300 dpi / CMYK 8bit into my main page, i get these strange stitching white lines over the image.
Not only that, but after working on my arrangement some more, if i click my placed image, i notice how Illustrator has sliced it into 2 or more parts..
This is annoying, since getting those white stitching lines doesn't really make me safe for print, and also bothers me that Illustrator slices the image into 2 or more parts without asking or confirmation.
Anyone knows how i can fix this problem?
Thanks,
John

Placing images in Illustrator for print ready files

I'm designing a brochure in Illustrator that contains several logos and photos. (Yes, I know, Illustrator... I've read several forums and know that InDesign may be a better program for this, but I completely underbid this project and really need to stick with something I know for cost efficiency.)
I need to resize several images in Photoshop to place in Illustrator and I'm wondering if I should save them as CMYK jpegs, or tiffs, etc. I need the file to be the smallest it can be for upload to the printer. I need the basics on different file types and their pros and cons.
Also, when I'm sending out the proof to the customer, any tips on saving the pdf so the images aren't too blurry and the file is still sendable?
Please help!! Any other information or tips on how to prepare my file as a print ready would be great. I love to learn and really need some great resources.
Thanks!

How many pages are we talking about? The key to file efficiency is Placing images at their final size, so you are on the right track. Let me try to help...
"I need to resize several images in Photoshop to place in Illustrator and I'm wondering if I should save them as CMYK jpegs, or tiffs, etc. I need the file to be the smallest it can be for upload to the printer. I need the basics on different file types and their pros and cons."
-Do not save as JPG. The compression artifacts will show up in print. Just Place CMYK .tiffs or .psd's without sizing in Illustrator. Another thing to keep in mind is "Linking" the image files instead of "Embedding" them. You have a little more control saving your page files as EPS before creating the final PDF.
"Also, when I'm sending out the proof to the customer, any tips on saving the pdf so the images aren't too blurry and the file is still sendable?"
-There are a few different ways you can create a PDF viewable as a softproof. You could send the final as a Standard PDF using defaults. Don't forget to embed the fonts and leave color unchanged. What I do is Export > RGB TIF @ 150ppi > Open the .tiff in Photoshop and Save-As Photoshop PDF with a JPG compression of 8. You could do that for each page and then reassemble using Acrobat for one assembled, final PDF optimized.
"Please help!! Any other information or tips on how to prepare my file as a print ready would be great. I love to learn and really need some great resources."
-Get Adobe's Print Publishing Guide. It has enough information in it to help you wade through all of the disinformation out there. Get in touch with a couple of local print shops and have them take a look at your files. Good shops can spot problems and give you some handy tips. Not all shops will take the time, so finding one can be tricky.
Thanks!
-You're welcome. Let us know how it all shakes out.

Placing images i have created in with corel photopaint

Have a problem placing images created in corel photopaint software into a muse website. None of the corel; images apear only images created with microsoft. At presnet only images created with microsoft come up when i try to place an images in to a website with muse software.

No offense, but seriously read up on web design. Web image formats are PNG, JPEG, SVG and GIF. Beyond that, Adobe apps may support generic image formats liek BMP, TIFF and a few others and convert the monce you publish the pages, but it's simply unrealistic to assume Adobe would the native image format of a competing vendor such as Corel's PhotoPaint files...
Mylenium

Odd pause in Ai2014 when selecting placed image

So as I’m working in AI2014, Im noticing a rather annoying glitch. Every time I select a placed image (.psd, .eps, .tiff, etc) there is a long pause when the ‘rainbow spinning wheel’ comes up for a few seconds to a few minutes. Not sure what AI is doing but it’s really annoying. (it also will crash from time to time or lock up for so long that I have to force quit it.
Last night I closed my Links tab and I noticed that the pause wasn’t happening…. what is it about having the links panel open that effects my performance?? I must mention that this WAS NOT the case in CC and 6.
Any dev have any workaround? (and no, keeping the links panel closed isn't really a good option)

Maybe -- with regard to sharing. I had modified the file since this problem came up (by removing the underlying type in photoshop) so I need to see if I still have an original to share.
One other note. I had gotten the ad from a co-worker who had set it up. One mistake in my original post is that the black box placed over the underlying type was 100% K and not a 4-color black.
In order to share, how do I get you the file(s) and do you want both the PDF and InDesign/Photoshop files?

Placed image not showing up once I save to PDF

I have checked the link again and again. The link is fine. At first I had a .psd file in there, which I thought may be the problem, but then changed it to a .eps and it still did the same thing. However, the weird thing is that the placed image shows up fine when I view the pdf on my computer. I also checked it out on a friend's computer and it looked great. But on the client's mac, she's not seeing it.... Anyone know what's going on here?

sarahpeller wrote:
. But on the client's mac, she's not seeing it.... Anyone know what's going on here?
Good possibility your PDF is complex, using transparency, perhaps, and your friend with the Mac is using Preview to view it. Make sure she's using Acrobat or Adobe Reader (FREE) before you do anything else.

Image Problems using bridge

Hi there.
Im having a wierd problem when placing images into PS from Bridge (vCS5). The image breaks up into numerous parts as shown by the image below. The only thing I can think of is that when shooting the image I sometimes set the camera to multishot to give myself a choice of image! Could this be my problem? I would be grateful for any advice. Many thanks Trev

This is a video driver problem. Update to latest. If using CS6 companies struggling to make them work. Latest does not always mean the best.

Placing images problem

Similar Messages

Maybe you are looking for