Placing images with AS

Hi
Can I use AS2 to re/place an image on the stage?
Thanks in advance
Edward

OK
I am trying to emulate this:
http://www.aandjlandscapes.com/index2.htm
click a link, acurtain goes up, and when it comes down there is
another image behind it.
I have created movie clips of curtains_up and curtains_down.
Now its a question of getting the correct image in front and
behind. I got it working nicely with one page, but once I introduce
a second one then there images appear wrong. They can change before
the curtain has gone up.

Similar Messages

Placed images with mini bridge

multiple image layouts where images are placed with mini bridge are not editable until the layout is saved, well still not, save and reopen and the images are not placed in the layout. deleated ps6 today, reinstalled, updated, purchased cc for ps.... still not working

I just tried this with a new document in CC, and I had no problem opening and editing the placed Smart Object in the unsaved document. If you place a jpg or other file that does not allow layers, and try to add a layer, it will save psb file and you will lose any editing, as the jpg will still be embedded. You either need to place psd files, or once you make some edits, use the smart object replace content to replace the jpg with the psd or psb file.

Placing Images with CS2

Hello:
I really hope someone can help me with this. I am using photoshop to create a banner and am having an issue. When I open a new document in photoshop, then use the "place" feature in File to insert a photo from my computer, it distorts the color properties of the photo upon insertion. It doesn't seem to matter where the photo came from or whether it's a .png file or a .jpg file, it does the same thing everytime. Does anyone have any ideas as to why this keeps happening? Could it be my settings?
Thanks in advance.

As far as the image being profiled or unprofiled...I'm clueless, sorry. Regarding the Color Settings, I hope this is what you're looking for. I went into the Edit menu and chose 'color settings'. This is what it gave me:
Working Spaces:
Color Settings: Custom
RGB Custom RGB
CMYK: U.S. Web Coated (SWOP) v2
Gray: Dot Gain 20%
Spot: Dot Gain 20%
Color Management Properties:
RGB: Preserve Embedded Profiles
CMYK: Preserve Embedded Profiles
Gray: Preserve Embedded Profiles
Conversion Options:
Engine: Adobe (ACE)
Intent: Relative Colorimetric
Use black point compensation (this box is checked)
Use Dither 8 byte channel images (this box is checked)
Advanced Controls:
Desaturate monitor color by 20% (this box is not checked)
Blend RGB colors using Gamma 1.00 (this box is not checked)
Thank you so much for helping.

Batch placing images with filename as an editable caption?

Howdy! Does anyone know if there is an easy way to place about 300 screenshots into ID CC on a multi-page document (obviously) AND capture each filename associated with the image as a text frame above it (or close to it)? I named my files as reminders for the copy I need to write to describe the screenshot and - boy - would this help a lot to avoid back and forth to refer to file names. I need to edit the copy associated with each image, which is why I need the text (filename) in a text frame. The file names are long. I know - not an ideal way to name files, but I had to do screenshots on the fly on someone else's computer and it's what popped into my head at the time. Thank you kindly!

You're in luck. You can use the Object > Captions > Caption Setup to pick Name as the metadata. Then when you place the file turn on Import Options and check Create Static Captions.
You also can create dynamic captions which pull other metadata from the images but it doesn't sound like that's what you need.
Also you can read more about Captions in InDesign Help.

Help with placing images - why do they appear at 150% and look bad?

Hi there,
Relative newbie here.
I have my display performace in InDesign set to high. Whether I 'place' an image or simply drag it onto the page, and regardless of what image file format I use (tif, png, jpg, whatever), when placed, the images appear about 50% bigger than the source, and low-ish quality. I'm forced then to try to resize them manually so they look good on-screen and when printed.
Why when I place images do they not appear at 100%?
Is there a way to resize images other than grabbing the re-size handles and hoping for the best?
Many thanks.

OK, if the scale says 100% with the direct select tool, that's what you have. Note that using the regular select tool (the black arrow) will ALWAYS show 100% in the scale fields unless you have set your prefs to "adjust scaling percentage," so that's why you use the direct select tool to check. You can also selct the image with either tool and look at the Info Palette. at 100% the actual and effective ppi listed will be the same. What resolution is currently listed in the Info Palette?
I asked about click vs, click and drag because in CS4 when you drag a frame it always scales the image to fit. This is not true in CS3.
Screen captures are typically 72 ppi at the size they are captured. 72 ppi is low for most print work, but for screen captures nobody really expects much in terms of quality. You really are placing, right, not dragging from Photoshop into ID, which is the equivalent of pasting? Pasting an image gives you only the screen preview in CS3. I'm not sure you'd see a difference with a screen grab, though, since the preview would also be 72 ppi.
If the image is really too large on the page you can scale in ID by holding the Ctrl + Shift keys while dragging a handle. You must press the keys before clicking the mouse in Windows becasue there is a bug. You can also use the Scale tool, or enter a new scale value in the scaling fields. You can use actual dimensions in those fields if you include the units, by the way.
In Photoshop you can scale the image using Image > Image Size... If you uncheck the "resample image" box the resolutiuon will change in inverse proportion to the size, so reducing the size will increase the resolution, but there will be no differnce in quality over scaling in ID.

Placing images i have created in with corel photopaint

Have a problem placing images created in corel photopaint software into a muse website. None of the corel; images apear only images created with microsoft. At presnet only images created with microsoft come up when i try to place an images in to a website with muse software.

No offense, but seriously read up on web design. Web image formats are PNG, JPEG, SVG and GIF. Beyond that, Adobe apps may support generic image formats liek BMP, TIFF and a few others and convert the monce you publish the pages, but it's simply unrealistic to assume Adobe would the native image format of a competing vendor such as Corel's PhotoPaint files...
Mylenium

Problem with photoshop automatically resizing placed images

Hi,
I have PS6. I have images that are 144x100 px. When I use file>place ps resizes the image to 108x75. I can't figure out how to make ps quit resizing my pictures. Anybody know?
Thanks

When Pasting, Dragging, copying and placing an image Photoshop will copy all of the image being duplicated original pixels to preserve the image pixel quality the image quality. If the receiving document has a different DPI resolution the image may look a different size in the receiving documents because of the number of pixels added to the document that has a lower or higher dpi resolution. If the image is being placed in if the image pixels exceeds the receiving documents canvas size. Photoshop may scale the smart object layer to fit within the canvas that depends on the users Photoshop's preference. All of the images original pixels are still there in the embedded object. In my Photoshop Collage Scripts I always transform all placed images to 100% size incase Photoshop scaled the placed image. For you can not get the scale percent Photoshop used. Once I know I have the image at 100% size I can use the layer bounds to get the actual number of pixels there are in the placed image. Once I know that I can calculate the scale I need to use to resize the image to fit the area being populated in the collage template. Once resized I center it into place and mask off any excess image pixels.

I am using a Photoshop cs2, and I wonder if it is possible to keep the settings of the guidelines when closing an image, with the actual document ? It would be nice to have the guidelines locked down, I find it than when opening the same or another image,

I am using a Photoshop cs2, and I wonder if it is possible to keep the settings of the guidelines when closing an image, with the actual document ? It would be nice to have the guidelines locked down, I find it than when opening the same or another image, the guidelines are not locked, it is annoying to have to lock them down again. and it would actually be nice, to ba able to give specific directions when placing the guidelines. Thanks

Then why are the guides unlocked when I reopen a document that I saved with the guides locked ?
Thanks.

Bridge CS4 won't output to pdf multiple images with same filename

Hiya...my googling efforts have thus far failed!
I've got CS4, and in Bridge, I created a New Smart Collection to find all filenames in a folder containing "." or ".jpg" - which in turn searched through all the subfolders like what you used to be able to do in Photoshop CS3. Very simple stuff, but all the images are jpg's, but in multiple folders (I don't want to move them out of the folders, as the files came from an external source, and there are heaps of folders, and I don't want to pdf each subfolder seperately as it will take forever).
The problem is that some of the files have the same filenames (again I'd prefer not to rename, as it happens a lot on this project, and they are all over the place). So whilst Bridge will show the thumbnail images correctly in the content tabbed screen in my New Smart Collection, but once I've done the Output to PDF thing, for example, instead of showing both different images it has pdf only the first image but repeated it twice. And this happens multiple times throughout the pdf, the more times the same filename is used, the more times the first image gets repeated.
I know that it is messy to have multiple similar filenames, but why can't bridge just place the image anyway? It allocated a space for it on the pdf and does show it in bridge, it just doesn't seem to survive the transfer to pdf well.
The only other thing that I have done is use the below link (which was posted on another adobe forum thread) to create a custom pdf output template (nothing too fancy, just number of rows / columns, size, font etc). But I've tried using the standard bridge templates and it does the same thing.
http://www.proficiografik.com/2009/08/03/save-custom-pdf-output-template-in-adobe-bridge-c s4.html
Any help would be appreciated...even if to tell me that I am being unreasonable!
UPDATE 16/11/09
Just to let you know that I seem to have resolved the bug inadvertently with one of the Adobe updates. The below is the link for the AdobeOutputModule-2.1-mul-AdobeUpdate.zip which was released on 2/19/2009 - which allows for headers & footers to be placed in the Ouput pdf. I finally installed it today, and everything seems to be working fine now (i.e. I can pdf multiple images with the same filenames and the pdf will actually show each different image rather than repeating only 1 of the images).
Must have been a fix installed in the contact sheet templates that get installed with the update - not sure why the original version was corrupted, but I've left that with the Adobe guys (I submitted a bug report - and they were able to replicate the problem but hadn't fixed it as yet).
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4228
Message was edited by: djtun71 (16/11/09)

When I click import from disc I am asked to choose a disc and then I get this message:
The following photos will not be imported because they are already present in the catalog. To see these photos in the catalog select 'Show in Library' (the import will be canceled).
This is followed by a long list of images. If I click 'Show in Library' I can see all the images with the same filename. And then they start to automatically write over those images with images from the disc. However they keep the same metadata and keywords from the previous images. If I click on Import and deselect the "don't reimport suspected duplicates" box, it imports only the images that don't share filenames and none of the images that do.
Is there a way of setting the "Don't reimport suspected duplicates" box in preferences?

Using still images with Final Cut (and the apple suite in general)

I have had a re-occuring and long term problem that has caused me many lost hours of head scratching and work arounds, and as of yet I have not been able to come up with a good solution.
Its to do with integrating still images with the Final Cut suite.
If I receive a high quality image from a client to use in their video and I then try importing it into Final Cut and animating it, it always ends up looking like a pile of ahem. Often I will get "swimming" lines appear across fine detail on the image, and parts of it will flicker as it moves across the screen. For instance, if I have a picture of some blinds or other fine detail (especially horizontal and vertical lines), when I add a grow and throw movement to it the detail will become very noisy - buzzing and flickering like mad.
I have found I can counter this by resizing the image in photoshop to a resolution closer to SD video (700w or 500h) - but I always end up losing detail, and the flickering and noise is only reduced, not eliminated. Other things that have helped are blur effects applied at a very low level, like 0.5 blur, so its not noticeable visually, but Final Cut seems to treat it differently and quieten the noise and flicker down.
However, all of these workarounds are ultimately still giving a reduced quality product.
Also, this problem is not necessarily constrained to Final Cut, I am currently fighting DVD Studio Pro because it is murdering the text quality in a stills slideshow I am creating - and in this situation there is no animation being applied. No matter what file type (psd, jpeg, tiff, png...) or size I output the text and images from Photoshop in, the moment DVD studio pro gets hold of it, it turns to cripe.
For a while I was putting it down to the fact that I usually edit in SD (PAL) formats, and there just wasn't the resolution available to reproduce fine detail. However, I do often see other people achieving pin-sharp fine detail on still images and text in SD formats (the Apple templates are a good example)
So, my question to you, oh great and high boffins, if you are dealing with still images and text, how do you do it? How do you work around any noise problems you have, and how do you produce those pin-sharp images (both moving and still) I see in other professional productions?
Quad G5 Mac OS X (10.4.8)

still images with too high a resolution will always cause problems. this is due to the detail of the image being finer than the scanline of the tv can display ... obviously this will caise the image to flicker as these details alternately appear and disappear as and when the scanline can display them. as you have discovered, the answer is to apply a very small blur, the effect being that the detail is spread by the blur such that the scanline can dislay it correctly.
text issues are often rooted in the same problem ... unless the text is placed very carefully (whole even number on the y axis) then the quality may be impaired due to the resulting interlacing/scanline issues

How to find out the Pixel Dimensions and Document Size of placed images?

Is it possible to find out the placed image details like Pixel Dimensions(Width,Height) Document Size(Width,Height) in illustrator through scripting. Kindly advice me with some examples.

http://www.adobeforums.com/webx/.3bbaa316.59b84fd8
I hope the snippet therein will get you started.
But after all, when you place an image via pi=layer.placedItems.add() it should pop in with its default dimensions, so that you have pi.height and pi.width ready.
Is this what you are aiming at?

SCRIPT TO IMPORT MULTIPLE PLACED IMAGES..AND OUTPUT MULTIPLE IMAGES TO SINGLE PDF.

Anyone got a script to import multiple placed images into CS4? or is this possible in CS5?
and can we output multiple layers into a single PDF in illustrator? Or multiple layers into single JPEGS from illustrator with one command instead of individually saving out each page... would be a huge time saver for me.
Currently I output each completed layer individually and then right click those outputted jpegs in their output folder and choose "combine supported files into acrobat..." to make a single acrobat file..
I`d also like to be able to CTRL click multiple layers and go save as... only those layers get saved out...
And so adding something in the Save for PDF output dialogue box to save layers to multiple pages would be a helpful time saver..

In CS 4 and CS 5 you can drag and drop fro m the finder or the Bridge, and I guess any other similar type viewer, multiple number of image files to a document. You can configure the bridge in such a way as to allow you to see the Bridge and your document at the same time for this very purpose.
If you just drag and drop the files are linked if you drag while holding the shift key then the files will be embedded.
ID and PS CS 5 have a minibridge which works the sam way but is an actually panel and will stay in the front.
I separate the images but they import one on top of another.

How do I align a placed image in a frame using JS?

I am new both to javascript and to scripting for InDesign, so please bear with me on this question.
I am trying to align an image in a graphic frame so it aligns to the top right corner of the frame.
I can do this using the InDesign interface by following these steps:
1. Create a rectangular frame.
2. Right-clicking the frame and selecting "Fitting > Frame Fitting Options."
3. Selecting the top-right square in the "Alignment" area of the Frame Fitting Options dialogue.
For me, this automatically aligns the image to the top right corner in the selected text frame, even if there is a placed item in the frame.
I am trying to apply this to the actual image frame using the following code where "modelFrame" is the rectangle that is the parent of the placed image:
modelFrame.frameFittingOptions.fittingAlignment.anchorPoint = AnchorPoint.TOP_RIGHT_ANCHOR;
I am not getting an error, but I am also not getting the desired results (in fact, it doesn't change anythign at all). What am I doing wrong?

Hi lanejd,
I have got the same issue as you but had just found the solution. Please see below:
modelFrame.frameFittingOptions.fittingAlignment.anchorPoint = AnchorPoint.TOP_RIGHT_ANCHOR;
This will only set the properties for the Frame Fitting Options. You will need to call a method/function. Add the below line to your script and it will execute the Frame fitting Options.
modelFrame.fit(FitOptions.applyFrameFittingOptions);
Hope this help!

Exporting linked images with overlays

Hi,
I'm using InDesign CS5.5 on OS X Lion.
I have linked images in my InDesign document that I want to export as JPG and maintain the original file naming scheme. That part is easy (export as HTML, look in the images folder; export as ePUB, look in the images folder of the archive; etc.). But what I'm struggling with is when there are overlays added in InDesign. Some examples of overlays: part labels (e.g., "a", "b", "c"), text labels, arrows, lines, etc. The only way I've found to export the overlays is to do this:
-Group the placed image and overlay items together
-Apply Object Export Options to the grouped item such that Custom Rasterization is checked
-Export via one of the options (e.g., HTML, ePUB)
I get one image per group, which is what I want. The problem is that the filename for that image is now a random number. What I really need is the filename for the original image to be used.
I've also tried exporting to other formats, e.g., PDF (and using the extract all image options) but that doesn't preserve the overlays in the extracted images (which makes sense since the PDF sees the letters as text).
I figure to do this I have to write a script. So before I embark on that quest, I was hoping to get opinions on whether a) such a script is possible and b) whether there is a better way. For specific workflow considerations, moving the adding of these overlays to the images outside of InDesign (e.g., via Photoshop) is not an option.
I envision a script that does the following:
-Set custom rasterization on every grouped object
-Export all grouped objects and other linked images as JPG (with certain settings)
-The exported images for the links would preserve the original filename (adding "_fmt" like InDD does now would be okay) and for the grouped items it would use the filename of the linked image that is part of the group (and fallback to a random number if there is no such image). In the case that the filename could not be specified, then embed the original filename of the linked image in the group
Obviously, if a script could also do the grouping of objects (e.g., finding a linked image, checking to see if there is anything on top of it, grouping it all together), then that would be even better, but I'm not holding my breath. :-)
Thanks,
Steve

This is where the Adobe DNG could shine.
http://www.adobe.com/products/dng/index.html
Worth the read ... this can save the changes that one
makes.
DNG does NOT help in this case.
There is a huge misunderstanding that this is part of what DNG can or should do.
But if you think about it, what good are the adjustments being stored in DNG if you have to use a particular program to open it anyway?
Think about Aperture's Edge Sharpen for a second. Lets say you store that value in a DNG. Fine, what other program is going to able to reproduce that result EXACTLY to how you were previewing it at 100% on your monitor?
Lighroom is trying to do something along these lines by passing editing commands off to Bridge through DNG. But here you run into another problem - it constrains what editing any one program can do. If Lightroom is limited to only ever having editing commands that are the same as what Bridge offers, and no other program on earth supports them, then what have you really accomplished? Will unknown editing commands simply be dropped without warning?
That's why I think simply exporting projects, which hold master images alongside sidecar files (very like XMP) that describe edits are about as good as you are going to get. If you want to truly preserve editing work and you care about quality, nothing beats a TIFF file where 100% of the pixels are exactly as you reviewed them during editing. I personally trust Aperture enough to back up master images along with edits, and am fine with that.

Framing image with transparent background png frame

hi,
i'm trying to find a way to frame images with transparent background png frames...
what i'm doing now is
1-drawing my image on a panel
2-creating a 2nd image using the frame's filename, stretching this 'frame-image' to a size slighlty larger than that of my main image and drawing the 'frame-image'
the problems with this method are:
1-depending on the width of the frame, the frame sometimes hides parts of the image (thick frame), and sometimes there is a gap between the frame and the image (thin frame).
2-if the image file containing the frame is larger than the frame (Ex: The image is 300x300, the frame is centered in this image and is 200x200; as opposed to the image is 200x200 and the frame takes up all the space), when i position the 'frame-image' near the top left corner of the image i want to frame, the frame appears at the wrong place (shifted down and to the right). This is due to the fact that i'm placing the top corner of the created 'frame-image' and not the frame, who is not in the top corner of my 'frame-image'.
Is there a way to do what i'm trying to do???
My ideas (which i don't know how to achieve are)
1-To 'analyse' my transparent background png file and
     1-only keep the frame,
     2-calculate the frame's thickness
OR
2-Let java do the analyzing for me and tell it to frame my image with the frame in the png file
please feel free to ask for more explanations if my description/question is confusing,
thanks.

Have you looked into the Border interface? If what you really want to do
is put a custom border on a component, you may be able to do it this way.
Anyway, here is some code that stacks and centres 2 images. It's not hard to do.
import java.awt.*;
import java.awt.image.*;
import java.io.*;
import java.net.*;
import javax.imageio.*;
import javax.swing.*;
public class Example extends JComponent {
    private BufferedImage backgroundImage;
    private BufferedImage foregroundImage;
    public Example(BufferedImage backgroundImage, BufferedImage foregroundImage) {
        this.backgroundImage = backgroundImage;
        this.foregroundImage = foregroundImage;
    public Dimension getPreferredSize() {
        int w = backgroundImage.getWidth();
        int h = backgroundImage.getHeight();
        return new Dimension(w, h); //assuming this is bigger
    protected void paintComponent(Graphics g) {
        super.paintComponent(g);
        int w = getWidth();
        int h = getHeight();
        //paint both, centred
        int x0 = (w-backgroundImage.getWidth())/2, y0 = (h-backgroundImage.getHeight())/2;
        g.drawImage(backgroundImage, x0, y0, null);
        int x1 = (w-foregroundImage.getWidth())/2, y1 = (h-foregroundImage.getHeight())/2;
        g.drawImage(foregroundImage, x1, y1, null);
    public static void main(String[] args) throws IOException {
        URL url1 = new URL("http://weblogs.java.net/jag/Image54-large.jpeg");
        URL url2 = new URL("http://weblogs.java.net/jag/DukeSaltimbanqueSmall.jpeg");
        JComponent comp = new Example(ImageIO.read(url1), ImageIO.read(url2));
        final JFrame f = new JFrame();
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.getContentPane().add(comp);
        f.pack();
        SwingUtilities.invokeLater(new Runnable(){
            public void run() {
                f.setLocationRelativeTo(null);
                f.setVisible(true);
}

Placing images with AS

Similar Messages

Maybe you are looking for