Placing iViews into Web Page Composer Web Page

Has anyone got this work?
I have unhidden the PCD so that it is visible in the KM directory.
I have created the entry point for iviews.
When trying to add iviews to a page, I could not navigate to the "pcd" folder in KM, so I went to KM and copied my iviews to the folder I created for the entry point (as the SP12 document suggests "/wpccontent/iviews").
I can then select them to add to a page, but in preview or runtime, the iviews do not appear on the web page.
I realize that the WPC is just a ramp-up/beta, but has anyone else made this work?
Regards

Success!
I think the solution (somehow) is configuring the initial permissions in the Security Zones.
The only problem is that the documentation is incorrect. The correction is in an SAP Note.
Below is the configuration (correction is bolded!):
Documentation says:
Defining Permissions for Security Zones
1. Navigate to Security Zones → com.sap.nw.wpc → wpc (not pagebuilder!). (The documenation says com.sap.nw.pagebuilder. This is incorrect!)
2. Define permissions for Web site owners and, if necessary, for authors.
a. From the context menu of the medium_safety folder, choose Open Permissions.
b. Give the wpc_editor_role role - or a user group - the permission End User.
You can leave the default entry for the Administrator column as None.
c. Choose Reset Child Permissions.
d. Choose Save.
3. Define permissions for users.
a. From the context menu of the no_safety folder, choose Open Permissions.
b. Give the everyone group - or another user group - the permission End User.
You can leave the default entry for the Administrator column as None.
c. Choose Reset Child Permissions.
d. Choose Save.
I made this change, and now I can see iviews in the page. I won't swear this is the solution, but that is the only change I have made lately.

Similar Messages

Can i place a room into a page, a workset?

Just like i can place a iView into a page, a workset
thanks

Hi
You can have the iview for entering the room inside the page.
Inside the portal content@content provided by sap@end user cont@standard portal users@[email protected] the My room iview is there. You can place it in your page.
You cannot enter in to the room if the permissions are not set. For this you have to navigate to Portal Content / com.sap.ip.collaboration / Rooms from System administration/Permissions.
Edit permissions and select 'Everyone' user group with enduser checked.Give the required permission from the dropdown.
Award points if helpful...
Regards
Geogi
Message was edited by: Geogi Luke

Placed iview on webpage in web page composer - get 404

Hello Gurus,
    has anyone come across this please?
    I have successfully made Iviews visible to KM for web page composer and so I was able to drag and drop the iview onto the page but immediately got a 404 the requested resource is not available.
the iview has end user read permissions so I dont think it's a permission problem.
thanks for any advice,
Tim

Hi Epexpert,
      I have already looked at the log files. You get this message which is puzzling:
while establishing WDContext - com.sapportals.wcm.repository.ResourceNotFoundException: request uri does not map;
servlet URI computed to be
<http://<my host name>/irjj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fsandpit.folder_sandpit!2fTimParker!2fWPC_Iviews!2fpri.brm.sap.iview.home>,
request URI was
<//irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fsandpit.folder_sandpit!2fTimParker!2fWPC_Iviews!2fpri.brm.sap.iview.home/documents/Content/Internal/html/home.html>
particluraly puzzling is the irjj in the path just after the hostname....
the iview I am attempting to add has everyone group read access with end user permissions.
thanks for looking at this.
Tim

How to add Portal iViews with Web Page Composer

Hi,
We are working with Web Page Composer in EP7.0 SP13.
We are creating web pages and we would need to add Portal iViews into. When we try to add an iView, we cannot select it from Web Content Browser to drop into the web page container.
How can we add iViews into our web pages?
Helpful answers will be rewarded!!
Thanks in advance,
Samantha.

Hi,
See these:
[http://help.sap.com/saphelp_nw70/helpdata/en/06/4776399abf4b73945acb8fb4f41473/frameset.htm]
[/message/4414263#4414263 [original link is broken];
Best regards,
Avishai Zamir

Showing Visual composer iviews within Web Page Composer (wpc)?

I am able to integrate KM iviews from the PCD into my web page composer pages, but when I try showing Flex 2 iviews generated by Visual Composer the flash runs on top of everything else on the page. The flash is simply put at page coordinates 0 x 0 whatever page region you try to put it in.
This is if iview isolation methold is set to embedded. If iview isolation method is set to URL then nothing is shown as the region is simply collapsed as if the content wasn't there.
I know there is a limitation to using Web Dynpro iviews with WPC pages, but the documentation says nothing about Visual Composer iviews.
Tips?
Henning Strand

Fixed by choosing fixed height for the iview (pcd config) and keeping isolation method set to URL.
This is as opposed to integrating KM iviews (document lists) where isolation method should be set to embedded and height kept to automatic.
Cheers
Henning

Web dynpro iview in web page composer ?

Hi All,
I am developing one Web site by using Web Page Composer. Can anyone help me for how to use Web Dynpro iview on web page.
Regards,
Rahul.

HI Rahul,
As of now we can not include a Web Dynpro iView on the WPC page like other iViews.
But you can try to create a URL iView from Web Dynpro application
and then add that URL iView to your page.
_Vishal

How to add PCD iview in web page composer.

I have created an KM navigation iview for user messages.I want to add this iview in web page composer.i tried creating entry point but not able to see any changes in web page composer designer.
Regards,
Atul Dumbre

Hi,
have you executed the steps outlined here?
http://help.sap.com/saphelp_nw2004s/helpdata/en/06/4776399abf4b73945acb8fb4f41473/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/45/e58347f5546976e10000000a1553f6/content.htm
Important steps are: "Deactivate the Hide in Root Folder checkbox." & "Restart the servlet engine."
How did you configure the entry points provider? sharedcontent=/wpccontent/Cross-Site Content;/documents/MyFolder
br,
Tobias

Iview in web page composer page

hi,
how insert iview in web page composer page?.I try to insert iview in webpage compser that showing only web content folder
regards,
arun

Hello Arun,
See http://help.sap.com/saphelp_nw73/helpdata/en/e2/44dc299bf548578ef9830c0c1c0f0b/frameset.htm
Regards,
Lorcan.

Using iViews in Web Page Composer

Hi,
I have created some iViews in the portal Content. How can I put this iViews into WebPages in the WebPageComposer?
Best,
Stephan

Stephen,
Please let me know your email id. I will send you few docs related to Web Page Comoser which will guide you to work with WPC.
Also, You can look into this so that you can use the iview in the web page
[http://help.sap.com/saphelp_nw70/helpdata/EN/a6/78aa5c2ab64c1d83db59a25793e9eb/frameset.htm]
Reward Points if it is helpful.

I just upgraded to Lion and switched my web page from MobileMe to Godaddy. But since upgrading to Lion a video I placed on my web page no longer shows up. instead I get "plug-in failure". That didn't happen until the Lion Upgrade what do I do?

I just upgraded to Lion and switched my web page from MobileMe to Godaddy. But since upgrading to Lion a video I placed on my web page no longer shows up. instead I get "plug-in failure". That didn't happen until the Lion Upgrade what do I do?

What's the format of your video? That will give you a hint as to what plugin is failing (or missing).
If you don't know, what's the URL of your site - it shouldn't take long for someone to work out the specifics.

Insert Html 5 content into web page

With Flash being phased out, how can you insert HTML 5 content into existing web pages?
I'm trying to figure it out but it's not working properly.

You can easily load it into another page using an iFrame.

Embedding .swf file into web pages

What's the best way of embedding a flash file into web pages?
After Microsoft introduce something about the active object (need
to click on the Flash file first on IE to activate it) it seems
like the best way is to use 'FlashObject'. Is there any other
better way? Thanks a lot.

SWFObject, which
used to be FlashObject.

Blogs - inserting into web page

Hi All
would some onoe beable to direct me to the best place on where to start??
I am new to blogging, I have downloaded and install wordPress for a blog but I would like to incorporate the blog into an existing web page, say the index.html.
or create something like this http://www.vetonet.dk/and-were-back-in-the-studio/
where the blog appears to be sat within the page??
can anyone help/direct me how to create a blog within a html webpage
any help would be great!!
cheers

You won't be able to do thin in an HTML page, you'll need to move to a dynamic language such as PHP or ColdFusion. Also, with WorPress you won't be able to "insert it into your page" - WordPress is a full blogging or even a CMS application... It is your site that you have to customize it to look the way you want. Do a Google search and see if you can find a lightweight blogging app that does what you want, but in most cases the blog wants to be the site and not just added to it.
Lawrence Cramer - *Adobe Community Professional*
http://www.Cartweaver.com
Shopping Cart for Adobe Dreamweaver
available in PHP, ColdFusion, and ASP
Stay updated - http://blog.cartweaver.com

Embed photoshop galleries into web pages

I generate photo galleries in Adobe Photoshop and I am
looking to embed them into web pages, is this possible? Either the
flash or non-flash galleries. Thanks!

> Is it possible to embed a Web gallery that is in my
remote files into a
> template page so it will match my Web site?
Yes. Let's see your page as it stands now. Can you upload it
and post a
link?
The Object Not Found message means that there is a javascript
object that
has been left out of the page. A look at the code will tell
which one that
is.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"sumnerweb" <[email protected]> wrote in
message
news:g6l8h6$m2b$[email protected]..
>I used CS3 to creat a Web gallery. We like all of our
pages to use our
>server
> side includes. I tried copying the code from the Web
gallery index page
> into
> one of my pages, but it didn't work. I get the gallery
heading and info,
> but no
> pics. Where the thumbnails and images should be I have
"Object not found!
> The
> requested URL was not found on this server. the link on
the referring page
> seems to be wrong or outdated. Please inform the author
of that page about
> the
> error."
>
> Is it possible to embed a Web gallery that is in my
remote files into a
> template page so it will match my Web site?
>

Embedding web forms into iweb pages.

I need for someone to answer the question on whether you can embed opt-in webforms into iweb pages and if so how do you get the code into the iweb code so it shows up on the page. Im using Aweber and need to put their opt-in form on my iweb page.
imac G5 Mac OS X (10.4.9)

http://www.varkgirl.com/Varkgirl/Basic%20HTML%20Additions.html

Placing iViews into Web Page Composer Web Page

Similar Messages

Maybe you are looking for