Placing OS image and Data image on right partition
Hi ,
We are facing issue in placing right image at the right partition.
We have OS image and data image. We are formatting and partitioning HDD as 40% (OSDisk) and remaining 100% as (Data). Both paritioons are active and selected as primary.
Then in installing operating system step, i have selected place image based on variable 'OSDisk'
and Data image is also slected to be placed based on variable 'Data'.
TS finishes without any issues but when i login to the machine i can see that OSDisk has become 'D' Drive and Data Drive has become 'C' so it shows C drive with label as 'Data' and D drive is label as 'OSDisk'
I want to place OS on C drive and Data drive should always be as 'D' drive.
I have tried another method and this time i tried to install OS as 'place based on stored variable i.e. OSDisk but install data image as next available partition but with this placement OS never boot after restart and TS eventually fails.
My aim is to make 'C' drive contain OS image and 'D' Drive to containg data image content and not the otherway around as it is happening with current test.
Any suggestions will be highly appreciated. Thanks.
Regards,
Hi ,
Yes it is Config manager 2012 R2 but image is actually not source media install.wim. It a custom captured image through MDT2013. Image has 1 partition only.
However I tried the above solution but drive letters are still not coming correct for OSDisk and Data Drive. Data is coming on 'C' drive and OSDisk is coming at 'D' drive.
Regards,
Similar Messages
-
Iphone 5c time and date not working right
hi guys I would really appreciate your help if you have any information or similarities on this.
I have an iPhone 5c and the date and time are both lacking, I don't know what is wrong and can I fix it? its also messing with my 3g and wifi
thanks,
gem.This same problem has happened again a few times. Tech support says the problem is the cmos battery and I need to send it in to get it fixed. Well, this is my only laptop so I cannot be without it for a few weeks so I can't do that.
This is extremely frustrating because this laptop was purchased less than a year ago. Why is this happening? I had my previous Dell laptop for 6 years and never had an issue like this. This is unacceptable to me. If I could still return it, I would have. -
Using TC for back up and data storage...partition?
I'm not sure I know enough to word this question properly so my apologies in advance.
I picked up a time capsule today and I want to make sure I set it up the right way. Besides using it for back-ups, I'd like to use it for data storage of things that no longer fit on my laptop. (Now a MacBook Air with a smaller drive than I'm used to.)
I'd like to put my iPhoto library, iTunes and various other things that I don't have to have with me all the time on it.
Should I partition the drive? Can I partition the drive? For data and backup sections?
I also have a question re: two people backing up to one TC. If one is backing up all the time and one is in town only occasionally, how is space distributed if partitioning isn't possible? If the TC capsule backes up till it's full and then drops off the oldest backup, what does it do when it;s full and the occasionally backed up machine is put into the network?
Many thanks for any help. I'm looking forward to setting this up and would like to avoid doing it wrong!whateverwerks wrote:
Should I partition the drive? Can I partition the drive? For data and backup sections?
I also have a question re: two people backing up to one TC. If one is backing up all the time and one is in town only occasionally, how is space distributed if partitioning isn't possible? If the TC capsule backes up till it's full and then drops off the oldest backup, what does it do when it;s full and the occasionally backed up machine is put into the network?
Many thanks for any help. I'm looking forward to setting this up and would like to avoid doing it wrong!
The drive cannot be partitioned. You can create folders as you wish to suit your need for things other than backups.
As noted earlier, when the occasionally connected machine is connected for backup, it will delete the oldest backup for that machine to make room when needed. -
RE: Time and Date Changed by itself
The date and time will change to the wrong one automatically especially after the batt died. This repeated itself regardless on how many times i readjust the time and date to the right one. Someone please help me.
I had the same problem today. I also have the iPod 4g, no problems up until today. First make sure you calender is set to "Gregorian, you can do this by going to Settings --> General --> International, and you will see the calender options, mark Gregorian. Still didn't work? Try this: I experimented a little, and what i did was: First, I went to Settings --> General --> Date and Time --> Set Date & Time (before doing this make sure you're in the correct time zone) and here you can change the time and date. But, if it changes automatically, go to the date, and you may have the same problem here, but here's what i did. I couldn't change the month, or day, but i could change the year. Change the year to 2011, and then all the other options should come up. Hope this helped!
-
Suppose you know the dates that negative film images were taken. Any
suggestions on how to manage these dates? Scanners will typically include
the date the image was scanned, but how and where do you put the date of the
original photograph? Do you set the date in LR or some other tool?
Best,
ChristopherI put them in outside of LR before loading them into LR. There are various tools you can use for doing this. If you want to have two dates, you have to do it yourself. There is the original date (called various things) and the date digitized. Date time original and digitized date are the same with digital cameras. I like to put in the date digitized, if for no other reason I know which scanner I used.
Lightroom has had problems with dates. I don't know if these problems are fixed. The trouble is dates are included in all three portions of the metadata. The camera writes (and I wrote with my editing tools) the date time in EXIF. There are also IPTC dates and LR writes XMP dates. This is why it's important to do it before LR touches the files.
Date time original and date time digitized are shown in the right metadata panel. "Date time" for my scans is the date I wrote the metadata, I guess a date time modified.
Judy -
Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?
I am acquiring images and data to a buffer on the edge of the while loop, and am finding that the crashing of the program is unpredictable, but almost always due to a memory saturation when the buffers gets too big.
I have attached the VI.
Thanks for the help
Attachments:
new_control_and_acquisition_program.vi 946 KBTake a look at this document that discusses how to monitor IMAQ memory usage:
http://digital.ni.com/public.nsf/websearch/8C6E405861C60DE786256DB400755957
Hope this helps -
Julie -
I have 20,00 images in my iphoto they have all been merged into one event. How do I restore them to the original events and dates?
Load the backup from before this happened
LN -
How do i create a gallery page that you can click on an image, expand it and move left or right to see more images?
You may use slideshow widgets to achieve this. For more details : Adobe Muse Help | Working with Slideshow widgets
-
Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?
I am acquiring images and data to a buffer on the edge of the while loop, and am finding that the crashing of the program is unpredictable, but almost always due to a memory saturation when the buffers gets too big.
I have attached the VI.
Thanks for the help
Attachments:
new_control_and_acquisition_program.vi 946 KBgot these vi's off ni site a while ago - see if they help
Attachments:
Memory_Monitor.zip 132 KB -
On my Mac screen my photo image is clear and the color are right, however when I print to either my epson 2200 or my HP printer bother the colors are off and the image is not as clear as on the screen.
Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
Show and hide Lov icons and Date Picker image on conditional?
How to show and hide Lov icons and Date Picker image on conditional?
Why do you just want to make the icons conditional? Shouldn't the field also be conditional?
Patrick
My APEX Blog: http://inside-apex.blogspot.com
The ApexLib Framework: http://apexlib.sourceforge.net
The APEX Builder Plugin: http://sourceforge.net/projects/apexplugin/ -
Lightroom 4 does not recognize some older JPG images (that Picasa and ACDsee show all right).
What is exiftool??
From: Rob Cole [email protected]
Sent: Saturday, March 30, 2013 5:35 PM
To: shaibeilis
Subject: Lightroom 4 does not recognize some older
JPG images (that Picasa and ACDsee show all right).
Re: Lightroom 4 does not recognize some older JPG images (that Picasa and
ACDsee show all right).
created by Rob Cole <http://forums.adobe.com/people/areohbee> in *Photoshop
Lightroom* - View the full
discussion<http://forums.adobe.com/message/5192327#5192327 -
I use aperture 3 since a long time. Using slit viewer, noe the bigger image become bigger then the given space and shifted to the right, so that I can't see the complete picture anymore. And I also don't see the last few picture in the strip below. How can I splve this problem?
This lloks like your preferences file might have become corrupted.
you probably have a problem with corrupted user preferences.
Remove the Preferences: Remove the Aperture's user preferences from the User Library as described here:
Aperture 3: Troubleshooting Basics http://support.apple.com/kb/HT3805
Note:Your User Library is hidden by default in 10.7.x or later - to open it in a Finder window use the "Go" menu from the Finder's main menu bar.
Quit Aperture, if it is running. Log off and on again.
Open the user library by using the Finder's "Go > Go to Folder" menu and hold down the options-key, until "Library" appears in the drop down menu. Select it.
In the widow that will open, scroll down to "Preferences"
From the "Preferences" folder remove "com.apple.Aperture.plist".
Then try to launch Aperture again.
But deleting the "Preferences" file will cause Aperture to forget the preferences settings. Be prepared to have to reset all options you set using the Aperture Preferences panel.
Regards
Léonie -
Help needed placing extra images in my portfolio.
I like to add some more pictures by my portfoliomap.
I have now 6 items each page and i like to know if its possible to add some more pictures and how i can do this?
You can find my site at..
http://www.dorffdesign.nl/affiches.htmlAs you can see on
http://www.dorffdesign.nl/advertenties.html
it worked out fine..
Only the last set off images contait to much space between the set before? Do you know where i can adjust this?
Regards Brian
Date: Tue, 17 Apr 2012 09:07:38 -0600
From: [email protected]
To: [email protected]
Subject: Help needed placing extra images in my portfolio.
Re: Help needed placing extra images in my portfolio.
created by Altruistic Gramps in Dreamweaver - View the full discussion
Upload the images to the images folder and use the markup as you have been using in the following, changing the name of the image to suit.
!images/arcadisch_logo.jpg|alt=|src=images/arcadisch_logo.jpg!
Gramps
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4340979#4340979
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4340979#4340979. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Hi all,
I solved the problem of placing an image in original login.jsp
Hope this will be usefull for all who will be trying to edit the original longi.jsp:
====>Place your image in the following folder:
C:\installations\Oracle_Infra(Your oracle_home)\portal\images
you place your image some-where else it will not be displayed .....
Hope this will be usefull!!!!
Thanks & Regards,
MallikarjunWell, you are quite right to put images in this place.
However, two points can be noted here:
1. This works with the assumption that your portal repository is in the infra-database. in cases of customer databases, you may have other folders which would be able to run the images from a similar folder in their respective homes.
2. Additionally, you can place your images anywhere on your servers and still have them working if you use an alias for the image folder location!
hope that helps.
syed
Maybe you are looking for
-
FF connects to several IP addresses on start-up, how to prevent it from happening?
Hi, I am wondering how I can turn Firefox off from connecting to several IP addresses when it starts up? I have set Firefox to remember my visited web pages/tabs, but to not load until the tab is chosen. I have also gone through the advices on the fo
-
Hi, I am Shanmugavel, SharePoint developer, I am facing the below SharePoint 2013 deployment issue while deploying using VS2012. If i will deploy the same wsp or existing wsp (last build) using direct powershell deployment, the solution adding prope
-
No thumbnails in organizer 12 for any video file larger than 3,1 mb
I am running premiere Elements 12 Quicktime 7.7.5 Windows 7 service pack 1 Organizer will not show (or update) thumbnails from video files (.mts and .m4p) when file sizes are over 3.1 mb. Organizer will play all the files. Element shows thumbnails an
-
ALE: Error handling through workflow
Hi All, My requirement is to trigger a workflow to send a mail when ever there is an error in posting an IDOC. I have created a FM, Business object, Process code and assigned FM & BO to it. created a workflow object and assigned BO object to it. I am
-
Stopping update in ACS 5.1
Hello I tried to update my ACS 5.1 appliance. I applied patch 5.1.0.44.3 and made an big mistake: I booted the server due to the fact that it was not reachable after one hour after appplying the patch. Now the server shows following message, when I t