Placing the file in UTF-8 format in Target Directory

Hi Experts,
Can any one please tell me how to place a file in Target Directory by PI in UTF-8 format.
It is a file to file PassThrough (no IR part) scenario and in receiver File Adapter I have used File Encoding as UTF-8
but still PI is not placing the file in UTF-8 format in the Target Directory.
Are there any modules by which the files are converted to UTF-8 format.
Can anyone please help me out.
Thanks and Regards,
Prajwal

Hi,
Please let me know if I need to change the TransferMode,File Type and FileEncoding in both sender and receiver channel.
I tried the below settings but still the file is not being placed in UTF-8.
Sender CHannel:    TransferMode         Text
                               FileType                  Text
                               FileEncoding            UTF-8
Receiver Channel    TransferMode         Binary
                                 FileType                  Text
                                 FileEncoding           tried with UTF-8 once and tried with blank
Can any one throw some light here.
Thanks and Regards,
Prajwal

Similar Messages

Files placed were not in UTF-8 format

Hi Experts,
In our project we have a pass through(no IR part) Interface from Source -
>>PI -
>>Target(where both Source and Target are File servers).PI should pick the file and place it in Target Directory by converting into UTF-8 format.For this we used File Type as Text and File Encoding as UTF-8 in the Receiver File channel.
Recently the Target file server migrated to UNIX OS from WINDOWS OS and nothing was changed in PI but after the migration the Target system is facing an error saying "File is not in UTF-8 format"
Previous when the OS is windows PI placed the files in UTF-8 format only but now after the OS migration to UNIX PI is placing ANSI files eventhough we are maintaining File Type as Text and File Encoding as UTF-8 in the Receiver File channel.
Can anyone say how to overcome this problem and convert the files into UTF-8 and place in the Target Directory.
Thanks and Regards,
Prajwal Kumar

Hi Shabarish,
Can you please explain a bit more about issue with the line feeds.
and also please let me know what should I check with the end system.
Will the module help us to convert the file into UTF-8 format..?
Thanks for your reply.
Regards,
Prajwal

The file is in a format which cannot be placed

Hi,
Ive reinstalled cs4 as i have refreshed my mac and now when i goto place a Psd or Tiff into illustrator it says "the file is in a format which cannot be placed".
Any suggestions? It is really bugging me its something i do on a daily basis!
Thanks

No way. CS4 is not compatible with OSX 10.10/ Yosemite. You need new software...
Mylenium

Convert a UTF-16 format file to UTF-8 format

Hi all
 I have a xml file in UTF-16 format I have to convert it into UTF-8 format so that
it can be opened with Internet Explorer.now when i am opening the file its showing error"Whitespace is not allowed at this location. Error processing resource 'file"
 the file content is given below
 < ? x m l v e r s i o n = " 1 . 0 " e n c o d i n g = "
u t f - 8 " ? >
< _ G L B - R G T X _ O R D E R S C P G >
 
 < E D I _ D C
4 0 S E G M E N T = " 1 " >
 < T A B N A M > E
D I _ D C 4 0 < / T A B N A M >
 < M A N D T > 1
5 2 < / M A N D T >
 < D O C N U M > 0 0 0 0 0 0
0 0 0 2 7 5 9 7 2 2 < / D O C N U M >
 < D O C R
E L > 6 2 0 < / D O C R E L >
 < S T A T U S > 3
0 < / S T A T U S >
 < D I R E C T > 1 < / D I R
E C T >
 < O U T M O D > 2 < / O U T M O D >
 < E X P R S S / >
 < T E S T / >
 O R D E R S 0 5 
 < C I M T Y P > / G L B / R G T X _ O R D E R S
C P G < / C I M T Y P >
 < M E S T Y P > O R D C
H G < / M E S T Y P >
 < M E S C O D / >
 < M E S F C T / >
 < S T D / >
< S T D V R S / >
 < S T D M E S > O R D C H G <
/ S T D M E S >
 < S N D P O R > S A P G E 7 < /
S N D P O R >
 < S N D P R T > L S < / S N D P R
T >
 < S N D P F C / >
 < S N D P R
N > G E 7 Q A R 3 1 5 2 < / S N D P R N >
 < S N
D S A D / >
 < S N D L A D / >
 < R
C V P O R > A 0 0 0 0 0 0 0 4 0 < / R C V P O R >
< R C V P R T > L S < / R C V P R T >
 < R C V
P F C > L S < / R C V P F C >
 < R C V P R N > R
L E C P G W D I 1 < / R C V P R N >
 < R C V S A
D / >
 < R C V L A D / >
 < C R E D
A T > 2 0 0 7 0 6 0 5 < / C R E D A T >
 < C R E
T I M > 1 5 4 1 5 3 < / C R E T I M >
 < R E F I
N T / >
 < R E F G R P / >
 < R E F
M E S / >
 < A R C K E Y / >
 < S E
R I A L > B U S 2 0 1 2 1 1 0 0 0 0 0 3 0 1 < / S E R
I A L >
 < / E D I _ D C 4 0 >
 < E 1 E D K
0 1 S E G M E N T = " 1 " >
 < C U R C Y > E U
R < / C U R C Y >
 < W K U R S > 1 . 0 0 0 0 0 <
/ W K U R S >
 < Z T E R M > Z 0 0 1 < / Z T E R
M >
 N B 
 4 5 2 0 0 2 2 0 7 2 1 1 0 0 0 0 0 3 0 0 
 < R E C I P N T _ N O > 0 1 0 0 0 0
0 0 0 5 < / R E C I P N T _ N O >
 < A B R V W _
B E Z > B U S 2 0 1 2 1 1 0 0 0 0 0 3 0 0 < / A B R V
W _ B E Z >
 < _ G L B - R G T _ C H A N G E F L
A G S E G M E N T = " 1 " >
 < Q U A L F >
0 0 2 < / Q U A L F >
 < F L A G > X < / F L
A G >
 < / _ G L B - R G T _ C H A N G E F L A G
>
 < _ G L B - R G T _ C P G D A T A S E G M E
N T = " 1 " >
 < L A N G U > e n < / L A N G
U >
 < C O N S I G N _ F L A G > S < / C O N
S I G N _ F L A G >
 S 
 < / _ G L B - R G T _ C P G D A
T A >
 < / E 1 E D K 0 1 >
 < E 1 E D K 1 4
S E G M E N T = " 1 " >
 < Q U A L F > 0 1 4 <
/ Q U A L F >
 < O R G I D > Z 2 0 0 < / O R G I
D >
 < / E 1 E D K 1 4 >
 < E 1 E D K 1 4
S E G M E N T = " 1 " >
 < Q U A L F > 0 0 9 < /
Q U A L F >
 < O R G I D > 0 0 3 < / O R G I D >
 < / E 1 E D K 1 4 >
 < E 1 E D K 1 4 S E
G M E N T = " 1 " >
 < Q U A L F > 0 1 3 < / Q U
A L F >
 < O R G I D > N B < / O R G I D >
 < / E 1 E D K 1 4 >
 < E 1 E D K 1 4 S E G M E
N T = " 1 " >
 < Q U A L F > 0 1 1 < / Q U A L F
>
 < O R G I D > Z 2 0 1 < / O R G I D >
< / E 1 E D K 1 4 >
 < E 1 E D K 0 3 S E G M E N
T = " 1 " >
 0 1 2 
 < D A T U M > 2 0 0 7 0 5 1 8 < / D A T U M >
 < / E 1 E D K 0 3 >
 < E 1 E D K 0 3 S E G
M E N T = " 1 " >
 0 1 1 
 < D A T U M > 2 0 0 7 0 5 1 8 < / D A T U
M >
 < / E 1 E D K 0 3 >
 < E 1 E D K A 1
S E G M E N T = " 1 " >
 A G 
 2 0 0 0 0 1 2 
 < T E L F 1 > + 4 1 2 1 9 2 4 1 8 6 8 < /
T E L F 1 >
 < T E L F X > + 4 1 2 1 9 2 4 1 8 6
7 < / T E L F X >
 P l a n t O p
e r . B u y e r 
 
Z 2 0 0 
 < O R G T X > E u r o p
e < / O R G T X >
 0 0 3 
 < / E 1 E D K A 1 >
 < E 1 E D K A 1
S E G M E N T = " 1 " >
 L F 
 0 1 0 0 0 0 0 0 0 5 
 < N A M E 1 > I n t e r n a t i o
n a l A g r o . < / N A M E 1 >
 < S T R A S >
1 4 R u e d e S a h o n e < / S T R A S >
< S T R S 2 > C h r i s t < / S T R S 2 >
 1 5 5 
 < O R T 0 1 > L y
o n < / O R T 0 1 >
 1 0 2 0 4 
 < L A N D 1 > F R < / L A N D 1 >
 < T E L F 1 > 0 8 1 < / T E L F 1 >
< S P R A S > E < / S P R A S >
 A
l f r e d o 
 7 6 5
4 3 2 1 5 4 3 2 1 5 
 < S P R A S
_ I S O > E N < / S P R A S _ I S O >
 < _ G L B
- R G T _ T A X C O D E S S E G M E N T = " 1 " >
 < S P T N U M > 3 4 5 < / S P T N U M >
 < C Y T A X N U M > 4 5 6 < / C Y T A X N U M >
 < O T R I N F O > F R 9 8 7 1 2 5 6 4 4 4 2 < / O T
R I N F O >
 < / _ G L B - R G T _ T A X C O D E
S >
 < / E 1 E D K A 1 >
 < E 1 E D K A 1
S E G M E N T = " 1 " >
 E K 
 < N A M E 1 > F R P L N e u t r a
l i a < / N A M E 1 >
 < N A M E 2 > G T C o p
y R e f e r e n c e F a c t o r y < / N A M E 2 >
 < S T R A S > G l o b e S t r e e t Z 2 0 3 < / S
T R A S >
 < O R T 0 1 > N e u t r a l i a < / O
R T 0 1 >
 9 9 9 9 9 
 < L A N D 1 > F R < / L A N D 1 >
 A l e s s a n d r o V e r r e s c h i 
 5 0 0 0 2 4 3 0 0 0 4 9
7 
 < _ G L B - R G T _ T A X C O
D E S S E G M E N T = " 1 " >
 < C R N U M
> 2 9 8 < / C R N U M >
 < S P T N U M > 3 9
8 < / S P T N U M >
 < C Y T A X N U M > 4 9
8 < / C Y T A X N U M >
 < / _ G L B - R G T _ T
A X C O D E S >
 < _ G L B - R G T _ C P G M I D
S E G M E N T = " 1 " >
 < S M T P _ A D D
R > a l e s s a n d r o . v e r r e s c h i @ n e s t l e .
c o m < / S M T P _ A D D R >
 < / _ G L B - R G
T _ C P G M I D >
 < / E 1 E D K A 1 >
 < E
1 E D K A 1 S E G M E N T = " 1 " >
 L S 
 0 1 0 0 0
0 0 0 0 5 
 7 6 5 4
3 2 1 5 4 3 2 1 5 
 < / E 1 E D K A 1
>
 < E 1 E D K A 1 S E G M E N T = " 1 " >
 W E 
 < N A M
E 1 > F R P L N e u t r a l i a < / N A M E 1 >
 < N A M E 2 > G T C o p y R e f e r e n c e F a c
t o r y < / N A M E 2 >
 < S T R A S > G l o b e
S t r e e t Z 2 0 3 < / S T R A S >
 < O R T
0 1 > N e u t r a l i a < / O R T 0 1 >
 9 9 9 9 9 
 < L A N D 1 > F
R < / L A N D 1 >
 < _ G L B - R G T _ E 1 E D K
A 1 S E G M E N T = " 1 " / >
 < / E 1 E D K A 1 >
 < E 1 E D K A 1 S E G M E N T = " 1 " >
 R G 
 < N A M E
1 > G L O B E R e f e r e n c e F r a n c e < / N A M E
1 >
 < S T R A S > S t r e e t 1 < / S T R A S
>
 < O R T 0 1 > C i t y < / O R T 0 1 >
 1 2 3 4 5 
 <
L A N D 1 > F R < / L A N D 1 >
 5
0 0 0 2 4 3 0 0 0 7 0 1 
 < _ G L
B - R G T _ T A X C O D E S S E G M E N T = " 1 " >
 < C O T A X N U M > 1 2 3 4 < / C O T A X N U M >
 < C R N U M > 1 2 3 4 5 6 7 8 < / C R N U M
>
 < S P T N U M > 1 0 0 5 1 9 6 2 < / S P T
N U M >
 < C Y T A X N U M > 1 0 0 5 1 9 6 2
< / C Y T A X N U M >
 < O T R I N F O > 0 0
0 0 0 0 0 5 6 7 8 9 < / O T R I N F O >
 < J
U R C O D E > 1 0 0 5 1 9 6 2 < / J U R C O D E >
< / _ G L B - R G T _ T A X C O D E S >
 < / E 1 E
D K A 1 >
 < E 1 E D K 0 2 S E G M E N T = " 1 " >
 < Q U A L F > 0 0 1 < / Q U A L F >
 4 5 2 0 0 2 2 0 7 2 
 < D A T U M > 2 0 0 7 0 5 1 8 < / D A T U M >
 1 4 0 4 4 0 
 < / E 1
E D K 0 2 >
 < E 1 E D K 1 8 S E G M E N T = " 1 "
>
 < Q U A L F > 0 0 1 < / Q U A L F >
 < T A G E > 3 0 < / T A G E >
 
2 . 0 0 0 
 < / E 1 E D K 1 8 >
 < E 1 E D P 0 1 S E G M E N T = " 1 " >
 0 0 0 1 0 
 < A C T I
O N > 0 0 2 < / A C T I O N >
 0 
 < M E N G E > 1 0 0 . 0 0 0 < / M
E N G E >
 < M E N E E > E A < / M E N E E >
 1 0 0 . 0 0 0 
 E A 
 < V P R
E I > 1 0 < / V P R E I >
 1 
 < N E T W R > 1 0 0 0 < / N E T W R >
 < N T G E W > 8 0 0 < / N T G E W >
< G E W E I > K G M < / G E W E I >
 < M A T K
L > P 2 0 < / M A T K L >
 1 
 1 
 1 0 0 0 
 <
W E R K S > Z 2 0 3 < / W E R K S >
 < E 1 E D P
0 4 S E G M E N T = " 1 " >
 < M W S B T >
0 . 0 0 < / M W S B T >
 < / E 1 E D P 0 4 >
 < E 1 E D P 2 0 S E G M E N T = " 1 " >
 < W M E N G > 1 0 0 . 0 0 0 < / W M E N G >
 < A M E N G > 0 . 0 0 0 < / A M E N G >
 < E D A T U > 2 0 0 7 0 5 1 8 < / E D A T U >
 < E Z E I T > 1 4 5 0 0 0 < / E Z E I T >
 < _ G L B - R G T _ S L I D 0 1 S E G M E N T = " 1 " >
 < E T E N R > 0 0 0 1 < / E T E N R >
 < / _ G L B - R G T _ S L I D 0 1 >
 < / E 1 E D P 2 0 >
 < E 1 E D P 1 9 S E G
M E N T = " 1 " >
 < Q U A L F > 0 0 1 < / Q
U A L F >
 0 0 0 0 0 0 0 0 0 0
4 3 0 0 0 0 9 8 
 < K T E X T
> C a r t o n s - C e r e a l s M i l k 2 4 x 4 5 0
g < / K T E X T >
 < / E 1 E D P 1 9 >
 < E 1 E D P 1 9 S E G M E N T = " 1 " >
< Q U A L F > 0 0 3 < / Q U A L F >
 0 7 6 1 2 2 9 7 0 1 6 1 1 9 
 < / E 1 E D P 1 9 >
 < / E 1 E D P 0 1 >
< E 1 E D S 0 1 S E G M E N T = " 1 " >
 < S
U M I D > 0 0 2 < / S U M I D >
 < S U M M E > 1
0 0 0 < / S U M M E >
 < S U N I T > E U R < / S
U N I T >
 < / E 1 E D S 0 1 >
 < E 1 E D S
0 1 S E G M E N T = " 1 " >
 < S U M I D > 0 0
5 < / S U M I D >
 < S U M M E > 0 < / S U M M E
>
 < / E 1 E D S 0 1 >
 
< / _ G L
B - R G T X _ O R D E R S C P G >

Hi Saurabh,
your xml is not wellformed coz there are spaces in the prolog between the first character '<' and the '?'. Coz of any reason there are spaces between all characters, that is making your document not readable for parsers including IE. For your task to convert to UTF-8 you can use a XSLT mapping with element "output" and attribut "encoding"
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
 <xsl:output encoding="UTF-8"/>
 <xsl:template match="/">
Regards,
Udo

Write file in UTF-16BE Format

I am programming web page that runs SWF file (Flash movie) and servlet.
The SWF file sends with URL command data to the server.
send_lv.sendAndLoad("http://�", result_lv, "POST");The data at � UTF-8 (UTF-8 is the standard encoding for exchanging text, such as online mail systems. UTF is an 8-bit system.).
At the servlet in doPost command I get the data with
String temp = request.getParameter("smstext");I need to write the parameter �temp� into file in UTF-16BE Format, how I do it?
I try almost everything

Once you've got a String, you can get bytes corresponding to a specific encoding with the getBytes(String charset) method.
In your case:byte[] bytes = temp.getBytes("UTF-16BE");Then you may write those bytes to a file using a FileOutputStream.
http://java.sun.com/j2se/1.4.2/docs/api/java/lang/String.html#getBytes(java.lang.String)
http://java.sun.com/j2se/1.4.2/docs/api/java/io/FileOutputStream.html
You should obtain the same result with an OutputStreamWriter, for which you can specify the encoding in the contructor, and then write the String directly:OutputStreamWriter writer = new OutputStreamWriter(new FileOutputStream(fileName), "UTF-16BE");http://java.sun.com/j2se/1.4.2/docs/api/java/io/OutputStreamWriter.html

Create new text file in UTF-8 format by default

I'm working a lot with UTF-8 text files and mainly in this format. It's becoming annoying when I have to manually save every text file as UTF-8. After several trial-and-errors, I've made up a procedure that I've put in a blog. I think I could share
it here for those who need it. Hope it helps.
http://instrumenti-meliora.blogspot.com/2014/04/create-new-text-file-in-utf-8-format-by.html

You've made a procedure?
Are you sure you didn't :
Didn't what?
https://www.google.com/#q=change+notepad+default+encoding
Well, I'm not sure what you want me to see, but your search keywords do
NOT make sense. You do note change *Notepad* default encoding. What you can change is a
TEXT file's default encoding.
Well, of course, if you have access to Notepad source code and you're able to change it and re-compile again, then you could really say you change Notepad's "default encoding", which I suppose would mean "default encoding every time we save".
Why wouldn't you just provide a link (or some attribution) to the top result
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/default-utf-8-encoding-for-new-notepad-documents/525f0ae7-121e-4eac-a6c2-cfe6b498712c
or a link to watch this done on youtube?
http://www.youtube.com/watch?v=GnL6smxQE9k
The title of that forum post and Youtube video is a non-sense. New
"Notepad" document? Come on! That's apparently how a newbie think what it is and it's very likely he has not a clue what it is and what he is doing. And what if I don't use Notepad to create such file? If I
use UltraEdit, then mine should be "UltraEdit" document and that should be different from Notepad document, correct? LOL
The fact that you're able to find this video would also mean you're thinking like him in that the file is really called Notepad document LOL
For your information, that's called a text file (or document if you prefer this prettier term). It's also called plain text file.
Now, let's see the content of both links:
First of all, why did they tell people to create a new text file somewhere and then
COPY it to template folder? That's really so dumb
LOL Isn't it more intelligent to create such file directly INSIDE the folder?
Secondly, their procedures are not foolproof. What if the Windows directory is not c:\windows? They should tell people to open %Systemroot%\ShellNew instead. I suppose they don't even know how this folder is called because
nowhere is the term "template folder" ever mentioned.
Thirdly, what if that folder doesn't work for unknown reason (which might happen in XP)? Did they give any hint to a "failover" folder? No, they didn't. But I do in my procedure.
Fourthly, they are saying as if the file name has to be "TXTUTF-8.txt", but actually we can call it whatever we like. But smart people would have figured this out at the end.
5 (I'd stop saying fifthly and so on LOL) I'm not sure it's necessary (or recommended) to change "fSavePageSettings" & "fSaveWindowPositions" DWORD values for Notepad as "advised" in that answer.
As a side-note, I don't know what
http://www.pc1news.com/saving-changes-to-notepad-configuration-1216.html is supposed to give but when I open this, I got some uTorrent warning. Really seems like some malware webpage which tries to deceive people!
I actually searched how a (generic) new file is created and started from there.
So, maybe next time when you want to criticize or discredit somebody else, try to be more expert first? ;)

Writing files in UTF-8 format

Hi,
Our system is unicode enable and I want to write a file in UTF-8 format.
I'tried the following syntax.
OPEN DATASET l_filename FOR OUTPUT IN TEXT MODE ENCODING UTF-8.
and OPEN DATASET l_filename FOR OUTPUT IN TEXT MODE ENCODING default
But when I check the file, it is in ANSI format. Is there a way we can force the system to write it in UTF-8 format?
Thanks,
Ramesh

Hi Ramesh,
You could try to use the following coding:
*& Report ZUS_SDN_UC_XML_TO_UTF8_TRANSF
REPORT zus_sdn_uc_xml_to_utf8_transf.
define local data
CONSTANTS:
gc_encoding TYPE string VALUE 'UTF-8'.
DATA:
gd_result type string,
go_ixml TYPE REF TO if_ixml,
go_stream_factory TYPE REF TO if_ixml_stream_factory,
go_encoding TYPE REF TO if_ixml_encoding,
go_resstream TYPE REF TO if_ixml_ostream.
DATA:
gt_knb1 TYPE STANDARD TABLE OF knb1,
gd_xml TYPE string,
gt_xml TYPE TABLE OF string.
START-OF-SELECTION.
SELECT * FROM knb1 INTO TABLE gt_knb1 UP TO 10 ROWS
WHERE bukrs = '1000'.
go_ixml = cl_ixml=>create( ).
go_stream_factory = go_ixml->create_stream_factory( ).
go_encoding = go_ixml->create_encoding( character_set = gc_encoding
byte_order = 0 ).
go_resstream =
go_stream_factory->create_ostream_cstring( gd_result ).
CALL METHOD go_resstream->set_encoding
EXPORTING
encoding = go_encoding.
XML Transformieren
CALL TRANSFORMATION id_indent
SOURCE itab = gt_knb1
RESULT XML go_resstream.
APPEND gd_result TO gt_xml.
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
BIN_FILESIZE =
filename = 'C:\temp\xml_to_utf8.txt'
FILETYPE = 'ASC'
APPEND = SPACE
WRITE_FIELD_SEPARATOR = SPACE
HEADER = '00'
TRUNC_TRAILING_BLANKS = SPACE
WRITE_LF = 'X'
COL_SELECT = SPACE
COL_SELECT_MASK = SPACE
DAT_MODE = SPACE
CONFIRM_OVERWRITE = SPACE
NO_AUTH_CHECK = SPACE
CODEPAGE = SPACE
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = SPACE
TRUNC_TRAILING_BLANKS_EOL = 'X'
IMPORTING
FILELENGTH =
CHANGING
data_tab = gt_xml
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
not_supported_by_gui = 22
error_no_gui = 23
OTHERS = 24.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END-OF-SELECTION.
However, I like to mention that the file created from out ECC 5.0 (6.40, non-Unicode) contains a special character between the XML header and the data part (when displayed using NotePad Editor):
...xml version="1.0" encoding="utf-8"?>[special character]<asx:abap xmlns:asx="http://www.sap.com/a...
Using a HexEditor the special character (0x0A) is displayed as a dot.
Also Check with FM - TREX_TEXT_TO_UTF8
Regards,
KK

I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.

I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.

I am not aware of a way except for photos that allows you to select multiple files in an email. I even checked settings in the Adobe Reader app, and it does not show that ability.

ITunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc. I have had the service since Day 1 and NEVER had an issue. It didn't start until the Delete from Cloud switch to Hide

iTunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc. I have had the service since Day 1 and NEVER had an issue. It didn't start until the Delete from Cloud switch to Hide from cloud - the files that do not upload show grayed out on my other devices.

Have you confirmed that you successfull purged iTunes Match by also looking on an iOS device? If so, keep in mind that Apple's servers may be experiencing a heavy load right now. They just added about 19 countries to the service and I've read a few accounts this morning that suggests all's not running perfectly right now.

Change the permission while placing the file

Hi Experts,
I have a production issue :
I am placing the .txt file into a SFTP server location from a SFTP Location[NO Transformation in the file]. (Sender and receiver channels are SFTP)
I am using user- user1(for example) which have the read write access to the particular folder, hence when it places the file it places with 664 permission .(This permission gives only user1 as read/write access , but other user have read only access).
The requirement :
The user2 want to deletes the file from the particular folder location , they want to know by any means can PI change the permission while placing the file into that location so that user2 can also have read/write access.
Can you provide the opinion whether it can be done using SFTP receiver channel or any other option to change the permission of the file.

As far as i know the permissions are related to the folder and the User not for files
While creating the access, a particular user authorizations related particular folder, not related to files.
So this should be done some thing like by giving the read/write access to user2 as well
Regards

HT1296 i cannot transfer some videos to my iphone 3gs. the file is in MPEG4 format. i can view in itunes but cannot be transfered to iphone. Please help me with this problem.

i cannot transfer some videos to my iphone 3gs. the file is in MPEG4 format. i can view in itunes but cannot be transfered to iphone. Please help me with this problem.

In iTunes, Advanced>Create iPod or iPhone version

I have scanned photos using an Epson V500 scanner set to jpeg format using the least compression (highest quality) setting. When I try to import the scanned jpegs into iPhoto I get an error message saying "The file is an unrecognized format." But if I

I have scanned photos using an Epson V500 scanner set to scan using jpeg format at the highest quality (least compression) setting. When I try to import the scanned jpegs into iPhoto, I get an error message from iPhoto saying "The file is an unrecognized format." But if I reduce the quality setting on the Epson scanner to just slightly below highest quality, the images import into iPhoto just fine. Why won't iPhoto accept jpegs scanned at the highest quality setting? Wondering?

What scanner format settings dis you use? Are these color photos? If they are B/W did you scan as grayscale images? That could be the problem.
Are you able to open them with Preview? If so do a Save As, select full quality and save as a jpeg with a new file name. See if that file will import and work as intended.
OT

Creating XML file with UTF-8 format

Hi,
I have written the below code to download an XML file. but ia m able to in UTF-16 format.how do i download in UTF-8 format.
can somebody send i sample code for UTF-8 format.
types: begin of x_mara,
 matnr type matnr,
 mtart type mtart,
 end of x_mara.
TYPES: BEGIN OF ttab,
 record(50000) TYPE c,
 END OF ttab.
data: t_mara type standard table of x_mara.
DATA: xml_out TYPE string,
 xml_table type table of ttab.
select matnr
 mtart
 from mara up to 10 rows
 into table t_mara.
CALL TRANSFORMATION id
SOURCE output = t_mara
RESULT XML xml_out.
append xml_out to xml_table.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
 FILENAME = 'C:\Users\sirishac\Desktop\Siri.xml'
 FILETYPE = 'BIN'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = 'BCWEB'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
WRITE_LF_AFTER_LAST_LINE = ABAP_TRUE
IMPORTING
FILELENGTH =
TABLES
 DATA_TAB = xml_table
FIELDNAMES =
EXCEPTIONS
 FILE_WRITE_ERROR = 1
 NO_BATCH = 2
 GUI_REFUSE_FILETRANSFER = 3
 INVALID_TYPE = 4
 NO_AUTHORITY = 5
 UNKNOWN_ERROR = 6
 HEADER_NOT_ALLOWED = 7
 SEPARATOR_NOT_ALLOWED = 8
 FILESIZE_NOT_ALLOWED = 9
 HEADER_TOO_LONG = 10
 DP_ERROR_CREATE = 11
 DP_ERROR_SEND = 12
 DP_ERROR_WRITE = 13
 UNKNOWN_DP_ERROR = 14
 ACCESS_DENIED = 15
 DP_OUT_OF_MEMORY = 16
 DISK_FULL = 17
 DP_TIMEOUT = 18
 FILE_NOT_FOUND = 19
 DATAPROVIDER_EXCEPTION = 20
 CONTROL_FLUSH_ERROR = 21
 OTHERS = 22
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks in Advance,
Neha

hi
good
go through this link
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
thanks
mrutyun^

Downloading file in UTF-8 format

Hi,
I want to download a file in UTF-* format.
i have written the following code to download it in UTF-8.
OPEN DATASET L_filename FOR OUTPUT IN TEXT MODE ENCODING UTF-8.
LOOP AT p_struct INTO w_struct.
TRANSFER w_struct TO l_filename.
CLEAR w_struct.
ENDLOOP.
CLOSE DATASET l_filename.
my question how do i check the file whether it is been downloaded in UTF-8 or not?
Thanks in advance.
neha

Hi!
You have to download it into your PC. For this, use an FTP program (f.e smartftp).
Then use a text editor to check its format, for example PSPAD text editor.
Regards
Tamá

Reading a file in UTF-8 format

Hi,
I am trying to read a UTF-8 file but cannot see how to tell the file reader ( BufferedREader) to expect a UTF-8 format.
I can write to a UTF-8 formatted file ok using a Charset object in the FileWriter constructor but I can't see the equivalent solution for reading.
Any help appreciated
Thanks ... J

import java.io.*;
class Test127 {
    public static void main(String[] args) throws FileNotFoundException, UnsupportedEncodingException, IOException {
        BufferedReader br = new BufferedReader (new InputStreamReader (new FileInputStream (args[0]), "UTF-8"));
        String line = br.readLine();
        if (line != null)
            System.out.println (line);
        br.close();

Placing the file in UTF-8 format in Target Directory

Similar Messages

Maybe you are looking for