Plain text emails do not display content when Usin...

While testing the Nokia E71 as a possible phone to enable those of our workers who sometimes go on the road to access their emails using, an IMAP4 connection, I noted plain text emails just displayed the sender and subject line.  The text of the message itself is not displayed.  HTML emails all seemed to work perfectly it was just the plain text ones which did not work.
I checked the emails in our test IMAP4 account using a standard email client and they displayed in full correctly.
Has anyone else seen this and if so is there a way to fix it?

Hi Peter
Actually, Captivate does have an essentially unlimited number
of undo levels. But that number may appear to be different. The
number of levels starts when you begin editing the project. If you
close and re-open a project, that starts the undo process over.
I've tested and I gave up after about 280 or so undos.
Where Captivate doesn't allow an undo, it normally warns you
with a rather catastrophic looking dialog.
Cheers... Rick

Similar Messages

  • Emails are not displaying content. Not asking for password.

    Usually with every sign in/opening Mozilla, I am asked for my password for my account. As of this morning, it is not asking me for my password. When I click on a previously viewed email, it shows a blank screen. There are some emails that show normally, but most are not showing the content at all (just blank)??
    HELP!
    Thanks,
    Jen
    ''(E-mail address removed by moderator. Please read the [[Forum Rules and Guidelines]]) Thanks!''

    I am connected to the server, and it appears Mozilla is connected to the server. I am receiving emails and can read the emails that have been received today. But any emails I received prior to today I cannot see (this includes emails that I have opened and read, and emails that I haven't opened). Can you direct me how to review my password information and prompts? I don't know why it is not prompting me for my email account, but my childrens emails the password prompt comes up.

  • Console Slowness and Not Displaying Content When Maximized

    System Center Service Manager 2012 R2
    When working in a maximized SCSM 2012 R2 console the content for an incident or service offering or other forms in the product don't display their content correctly. Also, when interacting and typing within the forms it becomes very slow.  I've seen
    this behavior across multiple SCSM 2012 and later implementations.  The only fix seems to be minimizing the console and working through a minimized window.  
    Is anyone else experiencing this issue and has anyone submitted the bug to Microsoft so it gets resolved?

    This is a known issue and Microsoft is aware of it.  It's the implementation of the console that has a problem with a maximized window.  Nobody has stated they are working to correct it, so I assume it would require a massive overhaul of the console. 
    I am hoping for a web-based console, I think that will solve a lot of the current problems we have with SCSM.  There are 3rd parties that make some good ones if you have money to spend.
    The scsm team has confirmed they are working on this and other fixes to be released in next update rollup which should arrive sometime in or around April.

  • Why will Firefox will not display content when it has loaded the Face Book page?

    Firefox (FF) loads the Facebook page but only displays the menu of Facebook. Clicking on menu items does produce results but not the main Facebook page.

    *"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    *"Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

  • Some Text Messages do not display when using large font on iphone

    When using increased font size (accessability function) on iphone some text messages will not display. The iphone just seems to lock up. If normal font size is used text massage displays with out any issue. When font size is increased, text message will not display again.

    Hi Peter
    Actually, Captivate does have an essentially unlimited number
    of undo levels. But that number may appear to be different. The
    number of levels starts when you begin editing the project. If you
    close and re-open a project, that starts the undo process over.
    I've tested and I gave up after about 280 or so undos.
    Where Captivate doesn't allow an undo, it normally warns you
    with a rather catastrophic looking dialog.
    Cheers... Rick

  • I don't know what happened, all of a sudden, the content of here body of my email is not displayed. I can only see the preview lines. I must have inadvertently touched some thing, any idea what happened?

    I don't know what happened, the body of my email was not displayed any more. I must have unknowingly pressed something on my I Pad to cause this to happen ? I can read the preview lines ok, but not the mail itself, any idea how to fix this?

    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    Or...
    Double tap the home button to bring up the Recents List
    Tap and hold any icon until it wiggles
    Press the red to delete the Mail app
    Press the home twice button when done.

  • Overnight, text body of emails will not display for messages in inbox-only the from and to and a subject line displays. Draft messages in Ipad display fully. Inbox emials display fully on my main  Dell computer and my Iphone. Any ideas?  Duanekot

    Overnight, the taxt body of emails will not display for all messages in the inbox.  Only the From and To and a subject line display.  All messages in my Draft Mailbox display fully. Also, all emails in my Dell laptop and my Iphone display fully.  Any ideas?? Duanekot

    See if this helps .... Reset the iPad.
    Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider bar - let go of the buttons and let the iPad start up. Then check your emails.

  • Email body not displaying when printing

    email isn't displaying body when printing. Happened after I upgraded os to maverick
    Help!

    Have you done any troubleshooting, for example after downloading Mavericks did you run Software Update to check to see if your printer has the most up-to-date drivers? Please advise what steps you have taken to troubleshoot and advise exactly what printer is connected and how it's connected.

  • With "Download Headers" option checked, opening plain text emails results in cropped body text

    When I open raw plain text emails (i.e. not formatted as HTML) I only see the first
    255 characters of the email body; all of the remainder is chopped off, and never appears no matter how many times I re-open the email.
    I have narrowed this down to my somewhat unusual download preferences in Outlook. They are configured as follows:
      Send/Receive -> Download Preferences -> Download Headers (checked).
    I know the email text is there in full, because when I point my web browser at OWA, I can see the full body.
    If at first I choose Mark to Download and then Process Marked Headers, I can then open the plain text email and see the body in full.
    When I open HTML emails I have no problems, regardless of whether the email download was forced or not.
    This issue existed on my old Office 2010 installation for XP too. It persists now I have upgraded to Office 2013 on Win 7.
    This is not an acknowledged issue yet within the Outlook team (in fact, a possibly related issue was
    reported by someone else 3 months ago but suggested to be a font corruption issue, which is incorrect).
    It seems like Outlook just forgets to download the full text for plain text emails when opening them. It's repeatable every time, so it doesn't seem like a race condition. (To reproduce: set your Inbox download preferences as above, then send
    yourself a plain text email, wait for the Inbox headers to finish refreshing and then open the new email).
    We use a 3rd party provider (Cobweb) for our email service and I believe they are using Exchange 2013.
    We use ESET Smart Security Suite and I have tried disabling the scanner for that but see no change in the outcome. I would appreciate if anyone without ESET could try to reproduce these steps for themselves and confirm.
    Starting Outlook in Safe Mode does not solve it.
    Note: I already asked this
    question at the Office Community site and it was suggested I
    post on the Exchange Server Outlook Clients forum. The feedback there suggested it to be client related, so now I've been directed to post here!
    Thanks,
    Marcel

    Hi Melon, thanks for your response.
    My plain text font is set up as the default, Automatic.
    In any case, I can see the first 255 characters of the plain text body, so plain text font colour can be eliminated as a potential problem.
    After the 255th character, the body text then stops. There are no "hidden characters". If I shrink the window height to accommodate just what I see, the vertical scrollbar does not appear. This confirms that there are no hidden lines of text
    below.
    The mail is simply not downloaded from the server correctly. If I drag the mail onto my desktop, then view that file in Programmer's Notepad, I can see that after the position representing the 255th character in the body of the email, there is garbage (control
    characters).
    If, instead, I first mark the email for downloaded and then click the "process marked headers", wait for it to download and then drag it onto my desktop, by contrast, the body contents look complete and this is reflected in the fact that I can
    see the whole email when I open it in Outlook.
    This problem has so far affected me on four different PC setups (1xWinXP, 3xWin7) and two versions of Outlook (2010 and 2013). However, Cobweb -- our cloud email provider -- did recently upgrade to Exchange 2013, so that might be an important factor.
    I don't think I can remember seeing these plain text issues in the 10 years previous to that upgrade during which I've been using various flavours of Outlook.
    I have supplied repro steps in the original report above. Could someone please try these? I have expanded them in full below for simplicity:
    To reproduce:
    1. Change your download preferences in Outlook. They are configured from the ribbon bar as follows (assuming you are using Outlook in Cached Exchange mode, connecting to Exchange 2013):
      Send/Receive -> Download Preferences -> Download Headers (checked).
    2. Send yourself a plain text email containing more than 300 characters of text.
    3. Wait for the Inbox headers to finish refreshing.
    4. Open the new email.
    Result: The email body will be truncated at the 255th character.
    Expected: The email body should show all the characters.

  • I want plain text email

    You send out your alerts - including important security and privacy alerts - in multipart/alternative format. But the plain text portion is blank! I want plain text email. Can you please fix whatever is broken and sending the plain text half incorrectly. Thanks,

    Welcome to Apple Discussions
    Go to Preferences > Auto-Correction & turn off Automatically detect email and web addresses. This will not "fix" any that have already been made into links, but it will prevent new ones. You will have to manually fix existing ones. You can cut the text & then re-paste using Paste & Match Style. Also use Paste & Match Style when pasting in anything with a link such as an e-mail or web page content.

  • Apple Mail software - email is not displaying in folder

    I kept thinking it was something I was doing wrong (and it may still be!).
    I have Apple mail (my own domain, not Google's email system)...and my folders are kept in the cloud (Apple's cloud).
    Ever since I went to Mavericks when I try and browse through my folders the emails are listed there but clicking on an email does not display its contents. It is  a blank screen. My in-box is always fine. But my folders I sort mail into… a list with blank for the individual email's contents.
    I read through the forums and the best I could find was that the email folder needed to be rebuilt. But doing so only worked temporarily. If I quit my email and go back in, same problem. And it's also really, really slow in displaying the list.
    Very odd.
    ><({(º>  

    Figured it out...
    Turned out iCloud does not like odd characters in the front of folders.
    I had Tildes in front of special folders and folders with older projects and clients.
    Once I removed the Tilde everything got a lot better.

  • Some HTML Emails Do Not Display Properly

    Recently, some HTML emails do not display properly in Mail. All I see is HTML. Yet, 98% of my HTML emails render properly.
    Any thoughts on why this happens with some emails? Is it a Mail issue or are these emails not coded properly?

    Hello Tony.
    Could be a combination but since Mail renders 98% of of all HTML messages properly (using Safari as the engine), this indicates it is a coding problem.
    I'm not a big fan of using HTML with email since it introduces a number of problems. If everyone used Plain Text for message composition, the majority if not all problems experienced with email would be eliminated.

  • Hosted Email pages not displaying correctly

    Hello
    Ive tried searching this forum but didnt have any luck.
    My issue is this:
    I have a .Mac account and i usually make my newsletters for email in iWeb.
    I host it to my server space on .Mac.
    It displays correctly in Safari and even when i send it to myself in Mac MAIL.
    However, ive just started using an email client so that i can send my html emails to all my database contacts in one go.
    Im using iContact for this.
    Within iContact i can create an email by simply adding a web adress (pointing to my page on my server)
    The problem is that when i send it to a GMAIL, HOTMAIL, YAHOO and probably other email apps besides MAIL...all the email does not display fully.
    Images are missing, text is all over the place etc
    I cannot figure out what i could be doing wrong.
    Any help would be appreciated as im not sure whether this is an iWeb or iContact issue....or just me
    Regards

    Have you sent HTML emails to GMAIL, HOTMAIL and YAHOO accounts successfully before? Are those services capable of handling HTML formatted email? Not all email clients can handle that type of email.
    OT

  • Unable to change font color for Plain Text Emails

    I have a Win7 Enterprise x86 machine running Outlook 2010.  I am unable to read plain text emails.  When I go into Options->Mail->Stationary and Fonts, the preview box under "Composing and reading plain text messages" is all white. 
    I've tried changing it to automatic, black, random colors, different fonts and styles, click 'Ok' and nothing happens.  Preview pane and incoming plain text emails are white.  I followed all the steps in this TechNet article: http://social.technet.microsoft.com/Forums/office/en-US/0e535f1f-0a2f-4208-9b05-42c4e943b484/outlook-2010-cannot-view-plain-text-emails?forum=officeitproprevious
    Applied the Fix It, repaired Office 2010, renamed the normalemail.dotm file.  Still nothing.
    Anyone run into this issue or have a fix?

    This could be a view issue. Please try to open Outlook using the /cleanviews
    switch to clean your views, and try again. Here is the line switches for Outlook 2010http://office.microsoft.com/en-001/outlook-help/command-line-switches-for-outlook-2010-HP010354956.aspx
    If /cleanviews doesn't work for you, you might try to recreate your Outlook profile. Please refer to this article:
    http://office.microsoft.com/en-us/outlook-help/create-an-outlook-profile-HA102749460.aspx
      

  • WebHelp not displaying content in left nav pane

    Any suggestions for why WebHelp is not displaying contents in
    the left navigation pane? When Help is called, it displays the
    frame (including buttons such as glossary, search, contents, etc)
    and the work area, but does not show the TOC in the left navigation
    pane.
    I have also tried generating FlashHelp, with the same
    results. This time, only the work area displays. Any suggestions to
    fix this?
    This is a new project, where RoboHelp is being deployed for
    the first time. Any suggestions for making this a simpler
    transition would be much appreciated. I have used RoboHelp for many
    years with a different company and do not recall ever running into
    this many problems.
    Help!

    Sorry, I haven't used the CSH method which, by the way, was
    designed to show only the topic at first, I think.
    I give my developers a list of path/filenames for topics, and
    they use this form:
    .../helpdirectory/myproject.htm#targettopic.htm
    There are some shortcomings to this method, which leaves the
    window open and, when you call another topic, another new window
    opens. In other words, you have to close the help window manually
    to avoid windowmania.
    A solution is a little js that checks to see if a window is
    already open, closes it and opens a new one. (If no help window is
    open, it's a harmless js error.) It's fast enough that you wouldn't
    notice.
    The downside here is losing the browser history. Forward and
    back buttons work only so long as the help window stays open.
    In my opinion, this is not a major concern, since many Web
    based applications these days tell users not to use the back
    button. Production users won't mind so much.
    For ordinary people doing e-shopping and online banking, the
    browser back button is anathema.
    The bottom line is, if you have a decent set of navigating
    options built into the design -- TOCs, left or right rail lists,
    useful links at top and/or bottom of the topic page, the back
    button can become superfluous.
    Browe sequences work fine from any point in the lineup (I
    know, it's not the same as browser history -- unless you give them
    a really useful set of sequences).
    The forever-loading left pane is gone in RH 7.
    Hope this is useful.
    Harvey

Maybe you are looking for

  • How do I get my old version of ios including the vids back after updating?

    I updated my cousin's iphone 3g to ios 4.2.1 and all the videos are lost now...I would like to revert the phone to its previous state, is this possible? Also: the phone is now in half english and half dutch....(calender for instance is still half in

  • .swf file created from Indesign won't open in Flash Player

    I have created an interactive flash presentation using Indesign. For several weeks I have made edits, exported a .swf file and opened the file by double-clicking it to open in Flash Player. From there I was able to export an .exe file with an embedde

  • Unusual behavior in planning book at the time of saving data

    Hi Experts, I am having a problem that in the planning book when I try to save the data accordingly:- a) Enter the data and then press save button and then click the save button:- In this case the data is getting saved. b) Enter the data and then wit

  • Recover Table in Oracle 10G - Very Urgent--Kindly Help

    Hi Guru I m using oracle 10G R2 in Unix. One of the user has unfortunately updated the table with wrong dataa aand hence we need to recover the table. Our DB does not have flashbaack databaase option on. For recovering the table using Flashback table

  • Can I use a mac os x installation disc on my macbook

    I bought my macbook in 2007 and now I have to re-install macOSx. But my "istallation disc nr.2" is missing. I could borrow other 2 installation discs but I don't know if they'll work on my computer. They came with an iMac and they are from 2008, a ne