Plan / Actual Comparison Report - S_PL0_86000029 is not showing one month

Gurus,
The TCode, S_PL0_86000029 when being run for just one month, e.g. August (08.2008), it shows the figures for the whole year.
Being the first year on SAP; the month this went GO-LIVE was October.
Data before that since 01.01.2008 till 30.09.2008 was uploaded.
How do we just break it down to one month?
This is quite important.
Thanks.
Edited by: Bhatia on Oct 16, 2008 10:34 PM

Hi Rau,
Could you please me How to Upload the GL or Open Item Balances on Month to Month Basis? for this we still use FB01 for Initial Upload?
My Client is giving the balance for last year Monthly with daily Transactions with past Posting dates obviously,do I need to Upload with same Posting dates or with Current Posting date?
For reporting Purpose My Client would like to see Monthly Balances of Open items for Initial Upload,"is this same as Month to Month Upload you advised above"?
What is the Difference b/w Month to Month ORr Just one Amount as total balance uploaded to SAP? which is Best Practice before Initial Upload?
Thank you ,
Paarthaa...

Similar Messages

S_PL0_86000029 - Financial Statement: Plan/Actual Comparison

Dear Sir,
We are using ECC 6.0 NewGL split functionality in FI. We are using Fiscal Year Variant V3.
I have done Cost Centre planning for the period "8 i.e. for the month
of November" at Version 1 and this is properly getting updated at the
Profit Centre level.
I have not done the planning for the period "9 i.e. for the month of
December" till now.
But when I execute the report- S_PL0_86000029 - Financial Statement:
Plan/Actual Comparison for the period 9 to 9 i. e. December, the
system is giving the Cummulative amount of planning till the month of
November (period 1 to 8) as Planned amount for the period 9 even if I
give period 9 to 9 in the selection criteria.
Basically this report should not show me any planned value in planned
column for the 9th period as I have not done any planning for the 9th
month till now.
Please confirm whether this report (S_PL0_86000029 - Financial
Statement: Plan/Actual Comparison ) is cummulative report, even if we
select a particular period in the selection criteria? If this report is
of cummulative nature is there any other report through which we can
see the planned amount of a particular profit centre for a particular
period.
Plz help ...........we need this report very urgently.
Thank & Regards,
Bijay Kumar Deo

Please check Tcode FAGLGCLE. - Activate Update of plan line items

Financial Statement: Plan/Actual Comparison (EhP3)

Hi,
I need to use the report Financial Statement: Plan/Actual Comparison (0FIGL_M30_Q0002).As i check in SAP Help, shows the report for this data source (0FI_GL_50) which is not availabe in ECC6.HELP.SAP shows the data for this report is extracted from 'FAGLFLEXP' table.To extract this data source SAP ask to implement package3.I would like to know how to extract data from the table without upgrading package3 or any other ways to implement this report.please specify the steps how to get the data source into BW.
Tq.

Hi
these reports are available in BW from EhP3 onwards... You need to implement the EhP3 package and you get lot many good reports in Finance....
When there is a std solution from SAP, I wont recommend to do any other development in this regard
BR, Ajay M

S_ALR_87013340-PRCtr Group:plan/Actual Caomparison Report performance issue

I'm trying to get the "actual line item" details from the S_ALR_87013340-PRCtr Group:plan/Actual Caomparison Report and I get a
ABAP run time error. I tried to running for just one month and on several accts. please help to me. how to get the report.
or how to improve the performance of this program.
Thanks in Advance

hi,
first we need to know what part of the code is taking time. Do run time analysis using SE30 transaction to know what part of coding is taking more time. use can ST12 transaction to get more detailed analysis.
Since this is standard SAP report also check any OSS note exist for the performance problem.

Request Got Deleted From 0PP_C01(Planned/Actual Comparison Order/Material)

Hi experts,
I am a newbie in the BW area.
We have 0PP_C01(Planned/Actual Comparison Order/Material View) , 0PP_C03(Plan/Actual Comparison Operation/Work Center View) and 0PP_C05(Plan/Actual Comparison Material Consumption) activated in our production system.
Few days before one data error happened during data load and accidentially, that particular request got deleted from the system.
When we tried to load data again, it is not allowing since the request is missing and the update mode is delta update.
Can any one guide me to retrieve the data back to the system??
Thanks alot in advance
Shobin

Hi,
You can try using PSA if that request it's still there.
Otherwise, you will need to regenerate that request in source system (by filling setup tables with parameters) and update BW with a full load.
Hope this helps.
Regards,
Diego

The report I published on the SQL server report server is not showing in the application we use to retrieve reports.

The report I published on the SQL server report server is not showing in the application we use to retrieve reports. My cell phone number is {removed}
Thanks.

Hello Roger Tenn,
Thank you for posting in the TechNet Forum.
As this issue is related to SQL server report server, to receive better report, it is recommended to ask in the SQL server forum.
https://social.technet.microsoft.com/Forums/en-US/home?category=sqlserver
The professionals here will be glad to help you.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Plan, Actual & Commitment Report in Multiple Currency

Dear SAP gurs,
Is there any report where I can see Plan, Actual & Commitments in Multiple currency (see below format). In standard SLAR reports, values are displayed in one currency at a time either I can see in INR or USD.
Here each WBS is planed in USD as well as in INR. If PO is raised in USD, then actual value should be shown against planning done in USD.
WBS Elem     Plan          Actual          Commitment
     USD     INR     USD     INR     USD     INR
WBS1.1     3000$     1000INR     500$               500INR
WBS2.2          50000INR          10000INR          300INR
Thanks,
Venkat

Dear Venkat
Each of the views in the hierarchy reports (such as 12KST1C) can
only contain values for one currency at a time (because totals for
multiple currencies would not make sense).
Since only one currency can be displayed at a time, the Trans.currency view is not meant to show values in multiple currencies; rather, the Trans.currency view only provides a reference to the user of the currency involved in the Plan and
Actual postings. For example, if the actual postings had been in
mixed currencies like:
Doc. date Cost elem.    Value COCurr CO.Cr      Value TranCurr TCrcy
   01-07-2007 911010000                 800   XXX                        1700 YYY
   01-07-2007 911010000              3,000   XXX                        3,000 XXX
Then the Trans.currency view would have contained:
Trans.currency         Plan             Actual
YYY                            0             800
XXX                         3,700           3,000
Result                     3,700           3,800
You can always switch between currencies in the report Settings ->
Currency, but only one will be displayed at once.
I hope this explanation helps you to understand the standard system
behaviour.
Regards
Martina

Reporting Tab is not showing in SCSM 2012 SP1 Console

I'm working with SCSM 2012 SP1. But after installing data ware house only "DataWareHouse" tab appares no "Reporting" tab. And it shows below MSG:
And only the below reporting management pack are available in the Data Ware House >> Management pack area.
I already check data warehouse server 'System Center Data Access Service' and 'SQL Server reporting Service', borth are running. But still 'Reporting' tab is not there.
Mithun Dey Web: http://cloudmithun.wordpress.com If this may give your necessary resolution please mark it as Answre.

At last I solve the problem. THere is 2 solution for resolve the issue.
Force start all warehouse job.
Un register and reregistared DataWareHouse againg.
In my case I do the borth after reregister datawarehouse I wait 1hr after that I manualy start the warehouse jobs. And it works for me.
Mithun Dey Web: http://cloudmithun.wordpress.com If this may give your necessary resolution please mark it as Answre.

Report parameter does not show up in rtf template

Hi all
I was able to produce an rtf file based on the XML bellow. I could create the header with the customer name and the invoice list with the totals. However, I already tried by any means to insert the AS_OF_DATE parameter in the rtf template but it never appears. Do I have to put it between a <?for-each?> <?end for-each?>. This must be a simple question but I’m very new to this.
Thanks in advance for any help.
Octavio
<?xml version="1.0"?>

<ARXAGMW>
<LIST_G_SETUP>
<G_SETUP>
<COMPANY_NAME>TUI Portugal, SA.</COMPANY_NAME>
<COAID>101</COAID>
<FUNCTIONAL_CURRENCY>EUR</FUNCTIONAL_CURRENCY>
<IN_SET_OF_BOOKS_ID>50</IN_SET_OF_BOOKS_ID>
<FUNCTIONAL_CURRENCY_PRECI>2</FUNCTIONAL_CURRENCY_PRECI>
<CONVERT_FLAG>Y</CONVERT_FLAG>
<LIST_G_SEL_CREDIT_OPTIONS>
<G_SEL_CREDIT_OPTIONS>
<INCLUDE_CREDIT_HIGH>Y</INCLUDE_CREDIT_HIGH>
<IN_ON_ACCOUNT_LOW>N</IN_ON_ACCOUNT_LOW>
<CREDIT_OPTION_MEANING>Age</CREDIT_OPTION_MEANING>
<LIST_G_SEL_OPTIONS>
<G_SEL_OPTIONS>
<PRINT_ON_ACCOUNT_FLAG></PRINT_ON_ACCOUNT_FLAG>
<SORT_OPTION>C</SORT_OPTION>
<SUMMARY_OPTION>I</SUMMARY_OPTION>
<FORMAT_DETAILED></FORMAT_DETAILED>
<INVOICE_TYPE_PRINT></INVOICE_TYPE_PRINT>
<CUSTOMER_NAME_PRINT></CUSTOMER_NAME_PRINT>
<BALANCE_DUE_PRINT></BALANCE_DUE_PRINT>
<LIST_G_COMPANY_CUST>
</LIST_G_COMPANY_CUST>
<LIST_G_COMPANY_INV>
<G_COMPANY_INV>
<COMPANY_INV>01</COMPANY_INV>
<LIST_G_INV_INV>
<G_INV_INV>
<SORT_FIELD1_INV></SORT_FIELD1_INV>
<INV_TID_INV>*</INV_TID_INV>
<SORT_FIELD2_INV>10FC</SORT_FIELD2_INV>
<LIST_G_CUST_INV>
<G_CUST_INV>
<CUST_NAME_INV>Academia Contemporânea do Espectáculo</CUST_NAME_INV>
<CUST_NO_INV>1011</CUST_NO_INV>
<CUST_ID_INV>*</CUST_ID_INV>
<CUST_STATE_INV></CUST_STATE_INV>
<CUST_CITY_INV>Porto</CUST_CITY_INV>
<CONTACT_SITE_ID_INV>*</CONTACT_SITE_ID_INV>
<LIST_G_SITE_INV>
<G_SITE_INV>
<ADDR_ID_INV>*</ADDR_ID_INV>
<AMT_DUE_REMAINING_INV>*</AMT_DUE_REMAINING_INV>
<LIST_G_1>
<G_1>
<INVNUM>10FC*526</INVNUM>
<CONS_BILLING_NUMBER></CONS_BILLING_NUMBER>
<LIST_G_INVOICE>
<G_INVOICE>
<DUE_DATE_INV>26-OCT-07</DUE_DATE_INV>
<INVOICE_TYPE_INV>10FC</INVOICE_TYPE_INV>
<CLASS_INV>INV</CLASS_INV>
<PAYMENT_SCHED_ID_INV>*</PAYMENT_SCHED_ID_INV>
<DAYS_PAST_DUE2>*</DAYS_PAST_DUE2>
<AMOUNT_ADJUSTED_INV></AMOUNT_ADJUSTED_INV>
<AMOUNT_APPLIED_INV></AMOUNT_APPLIED_INV>
<AMOUNT_CREDITED_INV></AMOUNT_CREDITED_INV>
<GL_DATE_INV>26-SEP-07</GL_DATE_INV>
<DATA_CONVERTED_INV></DATA_CONVERTED_INV>
<PS_EXCHANGE_RATE_INV>1</PS_EXCHANGE_RATE_INV>
<B0_INV>0</B0_INV>
<B1_INV>0</B1_INV>
<B2_INV>0</B2_INV>
<B3_INV>0</B3_INV>
<B4_INV>1</B4_INV>
<B5_INV>0</B5_INV>
<B6_INV>0</B6_INV>
<COMP_AMT_DUE_REM_INV>181.54</COMP_AMT_DUE_REM_INV>
<C_DATA_CONV_FLAG_INV>0</C_DATA_CONV_FLAG_INV>
<C_AMT_DUE_REM_INV>181.54</C_AMT_DUE_REM_INV>
<C_AMT_DUE_REM_INV_DSP> 181.54 </C_AMT_DUE_REM_INV_DSP>
<C_AMOUNT_CH_INV>0</C_AMOUNT_CH_INV>
<C_AMOUNT_CR_INV>0</C_AMOUNT_CR_INV>
<C_AMOUNT_RISK_INV>0</C_AMOUNT_RISK_INV>
<C_AMOUNT_CLAIM_INV>0</C_AMOUNT_CLAIM_INV>
<C_INV_BALANCE>181.54</C_INV_BALANCE>
<C_COMP_BAL_INV>181.54</C_COMP_BAL_INV>
<C_INV_BALANCE_DSP> 181.54 </C_INV_BALANCE_DSP>
<C_INV_B0>0</C_INV_B0>
<C_INV_B0_DSP> </C_INV_B0_DSP>
<C_INV_B1>0</C_INV_B1>
<C_INV_B1_DSP> </C_INV_B1_DSP>
<C_INV_B2>0</C_INV_B2>
<C_INV_B2_DSP> </C_INV_B2_DSP>
<C_INV_B3>0</C_INV_B3>
<C_INV_B3_DSP> </C_INV_B3_DSP>
<C_INV_B4>181.54</C_INV_B4>
<C_INV_B4_DSP> 181.54 </C_INV_B4_DSP>
<C_INV_B5>0</C_INV_B5>
<C_INV_B5_DSP> </C_INV_B5_DSP>
<C_INV_B6>0</C_INV_B6>
<C_INV_B6_DSP> </C_INV_B6_DSP>
</G_INVOICE>
</LIST_G_INVOICE>
<CONS_BILL_DISP>10FC*526</CONS_BILL_DISP>
</G_1>
</LIST_G_1>
<PERCENT_B0_ADDR>0</PERCENT_B0_ADDR>
<PERCENT_B1_ADDR>0</PERCENT_B1_ADDR>
<PERCENT_B2_ADDR>0</PERCENT_B2_ADDR>
<PERCENT_B3_ADDR>0</PERCENT_B3_ADDR>
<PERCENT_B4_ADDR>100</PERCENT_B4_ADDR>
<PERCENT_B5_ADDR>0</PERCENT_B5_ADDR>
<PERCENT_B6_ADDR>0</PERCENT_B6_ADDR>
<SET_PERCENT_ADDR>0</SET_PERCENT_ADDR>
<TOTAL_SITE_AMT>181.54</TOTAL_SITE_AMT>
<TOTAL_SITE_AMT_DSP> 181.54 </TOTAL_SITE_AMT_DSP>
<TOTAL_SITE_B0>0</TOTAL_SITE_B0>
<TOTAL_SITE_B0_DSP> 0.00 </TOTAL_SITE_B0_DSP>
<TOTAL_SITE_B1>0</TOTAL_SITE_B1>
<TOTAL_SITE_B1_DSP> 0.00 </TOTAL_SITE_B1_DSP>
<TOTAL_SITE_B2>0</TOTAL_SITE_B2>
<TOTAL_SITE_B2_DSP> 0.00 </TOTAL_SITE_B2_DSP>
<TOTAL_SITE_B3>0</TOTAL_SITE_B3>
<TOTAL_SITE_B3_DSP> 0.00 </TOTAL_SITE_B3_DSP>
<TOTAL_SITE_B4>181.54</TOTAL_SITE_B4>
<TOTAL_SITE_B4_DSP> 181.54 </TOTAL_SITE_B4_DSP>
<TOTAL_SITE_B5>0</TOTAL_SITE_B5>
<TOTAL_SITE_B5_DSP> 0.00 </TOTAL_SITE_B5_DSP>
<TOTAL_SITE_B6>0</TOTAL_SITE_B6>
<TOTAL_SITE_B6_DSP> 0.00 </TOTAL_SITE_B6_DSP>
<C_SITE_PAYMENTS_DSP> 0.00 </C_SITE_PAYMENTS_DSP>
<C_SITE_PAYMENTS>0</C_SITE_PAYMENTS>
<C_SITE_RISK>0</C_SITE_RISK>
<C_SITE_CREDITS>0</C_SITE_CREDITS>
<C_SITE_CREDITS_DSP> 0.00 </C_SITE_CREDITS_DSP>
<C_SITE_BALANCE>181.54</C_SITE_BALANCE>
<C_SITE_BALANCE_DSP> 181.54 </C_SITE_BALANCE_DSP>
<SEL_CONTACT_INV> </SEL_CONTACT_INV>
<C_CONTACT_NAME_INV></C_CONTACT_NAME_INV>
<C_CONTACT_PHONE_INV></C_CONTACT_PHONE_INV>
<C_CONTACTS_INV></C_CONTACTS_INV>
</G_SITE_INV>
</LIST_G_SITE_INV>
<D_CUST_NAME_INV>Academia Contemporânea do</D_CUST_NAME_INV>
<TOTAL_INV_AMT>181.54</TOTAL_INV_AMT>
<TOTAL_INV_AMT_DSP> 181.54 </TOTAL_INV_AMT_DSP>
<TOTAL_INV_B0>0</TOTAL_INV_B0>
<TOTAL_INV_B0_DSP> 0.00 </TOTAL_INV_B0_DSP>
<TOTAL_INV_B1>0</TOTAL_INV_B1>
<TOTAL_INV_B1_DSP> 0.00 </TOTAL_INV_B1_DSP>
<TOTAL_INV_B2>0</TOTAL_INV_B2>
<TOTAL_INV_B2_DSP> 0.00 </TOTAL_INV_B2_DSP>
<TOTAL_INV_B3>0</TOTAL_INV_B3>
<TOTAL_INV_B3_DSP> 0.00 </TOTAL_INV_B3_DSP>
<TOTAL_INV_B4>181.54</TOTAL_INV_B4>
<TOTAL_INV_B4_DSP> 181.54 </TOTAL_INV_B4_DSP>
<TOTAL_INV_B5>0</TOTAL_INV_B5>
<TOTAL_INV_B5_DSP> 0.00 </TOTAL_INV_B5_DSP>
<TOTAL_INV_B6>0</TOTAL_INV_B6>
<TOTAL_INV_B6_DSP> 0.00 </TOTAL_INV_B6_DSP>
<SUM_INV_BALANCE>181.54</SUM_INV_BALANCE>
<SUM_INV_BALANCE_DSP> 181.54 </SUM_INV_BALANCE_DSP>
<SUM_ONACC_CR_INV>0</SUM_ONACC_CR_INV>
<SUM_ONACC_CR_INV_DSP> 0.00 </SUM_ONACC_CR_INV_DSP>
<ONACC_CONV_CH_INV> </ONACC_CONV_CH_INV>
<ONACC_CONV_CR_INV> </ONACC_CONV_CR_INV>
<ONACC_CONV_RISK_INV></ONACC_CONV_RISK_INV>
<SUM_ONACC_CH_INV>0</SUM_ONACC_CH_INV>
<SUM_ONACC_CH_INV_DSP> 0.00 </SUM_ONACC_CH_INV_DSP>
<SUM_ONACC_RISK_INV>0</SUM_ONACC_RISK_INV>
<SUM_ONACC_RISK_INV_DSP> 0.00 </SUM_ONACC_RISK_INV_DSP>
<SUM_CLAIM_INV>0</SUM_CLAIM_INV>
<SUM_CLAIM_INV_DSP> 0.00 </SUM_CLAIM_INV_DSP>
<SEL_PERCENT_INV>0</SEL_PERCENT_INV>
<PERCENT_B0_INV>0</PERCENT_B0_INV>
<PERCENT_B1_INV>0</PERCENT_B1_INV>
<PERCENT_B2_INV>0</PERCENT_B2_INV>
<PERCENT_B3_INV>0</PERCENT_B3_INV>
<PERCENT_B4_INV>100</PERCENT_B4_INV>
<PERCENT_B5_INV>0</PERCENT_B5_INV>
<PERCENT_B6_INV>0</PERCENT_B6_INV>
</G_CUST_INV>
</LIST_G_CUST_INV>
<C_LABEL2_INV>Total For Type</C_LABEL2_INV>
<C_LABEL3_INV>Type</C_LABEL3_INV>
<FLEX_TYPE_INV>10FC</FLEX_TYPE_INV>
<TOTAL_INV_INV_AMT>181.54</TOTAL_INV_INV_AMT>
<TOTAL_INV_INV_AMT_DSP> 181.54 </TOTAL_INV_INV_AMT_DSP>
<TOTAL_INV_INV_B0>0</TOTAL_INV_INV_B0>
<TOTAL_INV_INV_B0_DSP> 0.00 </TOTAL_INV_INV_B0_DSP>
<TOTAL_INV_INV_B1>0</TOTAL_INV_INV_B1>
<TOTAL_INV_INV_B1_DSP> 0.00 </TOTAL_INV_INV_B1_DSP>
<TOTAL_INV_INV_B2>0</TOTAL_INV_INV_B2>
<TOTAL_INV_INV_B2_DSP> 0.00 </TOTAL_INV_INV_B2_DSP>
<TOTAL_INV_INV_B3>0</TOTAL_INV_INV_B3>
<TOTAL_INV_INV_B3_DSP> 0.00 </TOTAL_INV_INV_B3_DSP>
<TOTAL_INV_INV_B4>181.54</TOTAL_INV_INV_B4>
<TOTAL_INV_INV_B4_DSP> 181.54 </TOTAL_INV_INV_B4_DSP>
<TOTAL_INV_INV_B5>0</TOTAL_INV_INV_B5>
<TOTAL_INV_INV_B5_DSP> 0.00 </TOTAL_INV_INV_B5_DSP>
<TOTAL_INV_INV_B6>0</TOTAL_INV_INV_B6>
<TOTAL_INV_INV_B6_DSP> 0.00 </TOTAL_INV_INV_B6_DSP>
<TOTAL_INV_INV_BALANCE>181.54</TOTAL_INV_INV_BALANCE>
<TOTAL_INV_INV_CREDIT>0</TOTAL_INV_INV_CREDIT>
<TOTAL_INV_INV_RISK>0</TOTAL_INV_INV_RISK>
<TOTAL_INV_INV_CLAIM>0</TOTAL_INV_INV_CLAIM>
<TOTAL_INV_INV_CASH>0</TOTAL_INV_INV_CASH>
<SET_PERCENT_INV_INV>0</SET_PERCENT_INV_INV>
<SUM_PERCENT_B0_INV>0</SUM_PERCENT_B0_INV>
<SUM_PERCENT_B1_INV>0</SUM_PERCENT_B1_INV>
<SUM_PERCENT_B2_INV>0</SUM_PERCENT_B2_INV>
<SUM_PERCENT_B3_INV>0</SUM_PERCENT_B3_INV>
<SUM_PERCENT_B4_INV>100</SUM_PERCENT_B4_INV>
<SUM_PERCENT_B5_INV>0</SUM_PERCENT_B5_INV>
<SUM_PERCENT_B6_INV>0</SUM_PERCENT_B6_INV>
</G_INV_INV>
</LIST_G_INV_INV>
<TOTAL_COMPANY_INV_AMT>181.54</TOTAL_COMPANY_INV_AMT>
<TOTAL_COMPANY_INV_AMT_DSP> 181.54 </TOTAL_COMPANY_INV_AMT_DSP>
<SET_GSUM_INV_AMT> 181.54 </SET_GSUM_INV_AMT>
<SET_GSUM_INV_B0> 0.00 </SET_GSUM_INV_B0>
<SET_GSUM_INV_B1> 0.00 </SET_GSUM_INV_B1>
<SET_GSUM_INV_B2> 0.00 </SET_GSUM_INV_B2>
<SET_GSUM_INV_B3> 0.00 </SET_GSUM_INV_B3>
<SET_GSUM_INV_B4> 181.54 </SET_GSUM_INV_B4>
<SET_GSUM_INV_B5> 0.00 </SET_GSUM_INV_B5>
<SET_GSUM_INV_B6> 0.00 </SET_GSUM_INV_B6>
<SET_PAY_CR_MEMOS_INV> 0.00 </SET_PAY_CR_MEMOS_INV>
<SET_RISK_INV> 0.00 </SET_RISK_INV>
<SET_CLAIM_INV> 0.00 </SET_CLAIM_INV>
<SET_GPERCENT_INV>0</SET_GPERCENT_INV>
<SET_GSUM_INV_BALANCE> 181.54 </SET_GSUM_INV_BALANCE>
</G_COMPANY_INV>
</LIST_G_COMPANY_INV>
<SET_SEL_OPTIONS>1</SET_SEL_OPTIONS>
</G_SEL_OPTIONS>
</LIST_G_SEL_OPTIONS>
<SET_CREDIT_OPTIONS>Age</SET_CREDIT_OPTIONS>
</G_SEL_CREDIT_OPTIONS>
</LIST_G_SEL_CREDIT_OPTIONS>
<CA_FUNCTIONAL_CURRENCY>EUR</CA_FUNCTIONAL_CURRENCY>
<ACCT_BAL_APROMPT>Empresa</ACCT_BAL_APROMPT>
<ACCT_FLEX_BAL_SEG>c.SEGMENT1</ACCT_FLEX_BAL_SEG>
<ACCT_BAL_LPROMPT>Empresa</ACCT_BAL_LPROMPT>
<REPORT_NAME></REPORT_NAME>
<SUB_TITLE>22-FEB-08</SUB_TITLE>
<APP_MAX_ID></APP_MAX_ID>
<ADJ_MAX_ID>74399</ADJ_MAX_ID>
<PS_MAX_ID></PS_MAX_ID>
<SET_UNID_PHRASE>Unidentified Payments</SET_UNID_PHRASE>
<SET_BUCKET_TITLES>1</SET_BUCKET_TITLES>
<SET_FTR_LABEL></SET_FTR_LABEL>
<SET_COLUMNS>1</SET_COLUMNS>
<SET_CURRENCY>EUR</SET_CURRENCY>
<UNID_CH>0</UNID_CH>
</G_SETUP>
</LIST_G_SETUP>
<RP_COMPANY_NAME>TUI Portugal, SA.</RP_COMPANY_NAME>
<RP_REPORT_NAME>Aging - 7 Buckets Report</RP_REPORT_NAME>
<RP_DATA_FOUND></RP_DATA_FOUND>
<RP_SUBTITLE> 22-FEB-08</RP_SUBTITLE>
<AS_OF_DATE>22-FEB-08</AS_OF_DATE>
<UNID_PHRASE>Unidentified Payments</UNID_PHRASE>
<SHORT_UNID_PHRASE>Unidentified Payme</SHORT_UNID_PHRASE>
<TOP0>Não</TOP0>
<TOP1>Até</TOP1>
<TOP3>Até</TOP3>
<TOP2>Até</TOP2>
<TOP4>Até</TOP4>
<TOP5>Mais de</TOP5>
<TOP6>Em</TOP6>
<BOT0>Vencido</BOT0>
<BOT1>30 Dias</BOT1>
<BOT2>60 Dias</BOT2>
<BOT3>90 Dias</BOT3>
<BOT4>180 Dias</BOT4>
<BOT5>180 Dias</BOT5>
<BOT6>Litígio</BOT6>
<BUCKET_LINE_TYPE_0>CURRENT</BUCKET_LINE_TYPE_0>
<BUCKET_LINE_TYPE_1>PAST</BUCKET_LINE_TYPE_1>
<BUCKET_LINE_TYPE_2>PAST</BUCKET_LINE_TYPE_2>
<BUCKET_LINE_TYPE_3>PAST</BUCKET_LINE_TYPE_3>
<BUCKET_LINE_TYPE_4>PAST</BUCKET_LINE_TYPE_4>
<BUCKET_LINE_TYPE_5>PAST</BUCKET_LINE_TYPE_5>
<BUCKET_LINE_TYPE_6>DISPUTE_PENDADJ</BUCKET_LINE_TYPE_6>
<BUCKET_DAYS_FROM_0>-99999999</BUCKET_DAYS_FROM_0>
<BUCKET_DAYS_FROM_1>1</BUCKET_DAYS_FROM_1>
<BUCKET_DAYS_FROM_2>31</BUCKET_DAYS_FROM_2>
<BUCKET_DAYS_FROM_3>61</BUCKET_DAYS_FROM_3>
<BUCKET_DAYS_FROM_4>91</BUCKET_DAYS_FROM_4>
<BUCKET_DAYS_FROM_5>181</BUCKET_DAYS_FROM_5>
<BUCKET_DAYS_FROM_6></BUCKET_DAYS_FROM_6>
<BUCKET_DAYS_TO_0>0</BUCKET_DAYS_TO_0>
<BUCKET_DAYS_TO_1>30</BUCKET_DAYS_TO_1>
<BUCKET_DAYS_TO_2>60</BUCKET_DAYS_TO_2>
<BUCKET_DAYS_TO_3>90</BUCKET_DAYS_TO_3>
<BUCKET_DAYS_TO_4>180</BUCKET_DAYS_TO_4>
<BUCKET_DAYS_TO_5>999999999</BUCKET_DAYS_TO_5>
<BUCKET_DAYS_TO_6></BUCKET_DAYS_TO_6>
<BUCKET_CATEGORY>DISPUTE_PENDADJ</BUCKET_CATEGORY>
<GSUM_CUST_B0></GSUM_CUST_B0>
<GSUM_CUST_B1></GSUM_CUST_B1>
<GSUM_CUST_B2></GSUM_CUST_B2>
<GSUM_CUST_B3></GSUM_CUST_B3>
<GSUM_CUST_B4></GSUM_CUST_B4>
<GSUM_CUST_B5></GSUM_CUST_B5>
<GSUM_CUST_B6></GSUM_CUST_B6>
<GSUM_CUST_PERCENT_B0></GSUM_CUST_PERCENT_B0>
<GSUM_CUST_PERCENT_B1></GSUM_CUST_PERCENT_B1>
<GSUM_CUST_PERCENT_B2></GSUM_CUST_PERCENT_B2>
<GSUM_CUST_PERCENT_B3></GSUM_CUST_PERCENT_B3>
<GSUM_CUST_PERCENT_B4></GSUM_CUST_PERCENT_B4>
<GSUM_CUST_PERCENT_B5></GSUM_CUST_PERCENT_B5>
<GSUM_CUST_PERCENT_B6></GSUM_CUST_PERCENT_B6>
<GSUM_CUST_AMT></GSUM_CUST_AMT>
<GSUM_CUST_BALANCE>0</GSUM_CUST_BALANCE>
<GSUM_ONACC_AMT_CREDIT_CUST>0</GSUM_ONACC_AMT_CREDIT_CUST>
<GSUM_ONACC_AMT_CASH_CUST>0</GSUM_ONACC_AMT_CASH_CUST>
<GSUM_PAY_CR_CUST>0</GSUM_PAY_CR_CUST>
<TEMP_SUM_CUST></TEMP_SUM_CUST>
<GSUM_CUST_B0_DSP></GSUM_CUST_B0_DSP>
<GSUM_CUST_B1_DSP></GSUM_CUST_B1_DSP>
<GSUM_CUST_B2_DSP></GSUM_CUST_B2_DSP>
<GSUM_CUST_B3_DSP></GSUM_CUST_B3_DSP>
<GSUM_CUST_B4_DSP></GSUM_CUST_B4_DSP>
<GSUM_CUST_B5_DSP></GSUM_CUST_B5_DSP>
<GSUM_CUST_B6_DSP></GSUM_CUST_B6_DSP>
<GSUM_CUST_AMT_DSP></GSUM_CUST_AMT_DSP>
<GSUM_CUST_BALANCE_DSP></GSUM_CUST_BALANCE_DSP>
<GSUM_PAY_CR_CUST_DSP></GSUM_PAY_CR_CUST_DSP>
<C_DATA_CONV_GSUM></C_DATA_CONV_GSUM>
<TEMP_ONACC_CR_CUST></TEMP_ONACC_CR_CUST>
<TEMP_ONACC_CH_CUST></TEMP_ONACC_CH_CUST>
<RP_FTR_LBL>Grand Total:</RP_FTR_LBL>
<C_DATA_CONV_GSUM_INV></C_DATA_CONV_GSUM_INV>
<GSUM_INV_B0>0</GSUM_INV_B0>
<GSUM_INV_B1>0</GSUM_INV_B1>
<GSUM_INV_B2>0</GSUM_INV_B2>
<GSUM_INV_B3>0</GSUM_INV_B3>
<GSUM_INV_B4>181.54</GSUM_INV_B4>
<GSUM_INV_B5>0</GSUM_INV_B5>
<GSUM_INV_B6>0</GSUM_INV_B6>
<GSUM_INV_PERCENT_B1>0</GSUM_INV_PERCENT_B1>
<GSUM_INV_PERCENT_B2>0</GSUM_INV_PERCENT_B2>
<GSUM_INV_PERCENT_B0>0</GSUM_INV_PERCENT_B0>
<GSUM_INV_PERCENT_B3>0</GSUM_INV_PERCENT_B3>
<GSUM_INV_PERCENT_B4>100</GSUM_INV_PERCENT_B4>
<GSUM_INV_PERCENT_B5>0</GSUM_INV_PERCENT_B5>
<GSUM_INV_PERCENT_B6>0</GSUM_INV_PERCENT_B6>
<GSUM_INV_AMT>181.54</GSUM_INV_AMT>
<GSUM_INV_BALANCE>181.54</GSUM_INV_BALANCE>
<GSUM_ONACC_AMT_CR_INV>0</GSUM_ONACC_AMT_CR_INV>
<GSUM_ONACC_AMT_CH_INV>0</GSUM_ONACC_AMT_CH_INV>
<GSUM_PAY_CR_INV>0</GSUM_PAY_CR_INV>
<TEMP_SUM_INV>0</TEMP_SUM_INV>
<GSUM_INV_BALANCE_DSP> 181.54 </GSUM_INV_BALANCE_DSP>
<GSUM_PAY_CR_INV_DSP> 0.00 </GSUM_PAY_CR_INV_DSP>
<GSUM_INV_B0_DSP> 0.00 </GSUM_INV_B0_DSP>
<GSUM_INV_B1_DSP> 0.00 </GSUM_INV_B1_DSP>
<GSUM_INV_B2_DSP> 0.00 </GSUM_INV_B2_DSP>
<GSUM_INV_B3_DSP> 0.00 </GSUM_INV_B3_DSP>
<GSUM_INV_B4_DSP> 181.54 </GSUM_INV_B4_DSP>
<GSUM_INV_B5_DSP> 0.00 </GSUM_INV_B5_DSP>
<GSUM_INV_B6_DSP> 0.00 </GSUM_INV_B6_DSP>
<GSUM_INV_AMT_DSP> 181.54 </GSUM_INV_AMT_DSP>
<TEMP_ONACC_CR_INV>0</TEMP_ONACC_CR_INV>
<TEMP_ONACC_CH_INV>0</TEMP_ONACC_CH_INV>
<C_PS_MAX_ID></C_PS_MAX_ID>
<C_ADJ_MAX_ID>74399</C_ADJ_MAX_ID>
<C_APP_MAX_ID></C_APP_MAX_ID>
<C_CONVERT_FLAG>Y</C_CONVERT_FLAG>
<C_CREDIT_OPTION_MEANING>Age</C_CREDIT_OPTION_MEANING>
<C_FUNCTIONAL_CURRENCY>EUR</C_FUNCTIONAL_CURRENCY>
<C_FORMAT_DETAILED></C_FORMAT_DETAILED>
<C_SORT_OPTION>C</C_SORT_OPTION>
<C_SUMMARY_OPTION>I</C_SUMMARY_OPTION>
<REF_CURR_CODE_INV>EUR</REF_CURR_CODE_INV>
<C_CUST_SUM_LBL></C_CUST_SUM_LBL>
<C_ONACC_AMT_CR_CUST></C_ONACC_AMT_CR_CUST>
<C_ONACC_AMT_CH_CUST></C_ONACC_AMT_CH_CUST>
<C_ONACC_AMT_CR_INV>0</C_ONACC_AMT_CR_INV>
<C_ONACC_AMT_CH_INV>0</C_ONACC_AMT_CH_INV>
<C_CREDIT_APPLIED_LATE_CUST></C_CREDIT_APPLIED_LATE_CUST>
<C_UNID_CH></C_UNID_CH>
<C_CREDIT_APPLIED_LATE_INV>0</C_CREDIT_APPLIED_LATE_INV>
<C_UNID_CH_INV>0</C_UNID_CH_INV>
<C_SUMMARY_MEANING>Brief</C_SUMMARY_MEANING>
<C_FORMAT_MEANING>Invoice Summary</C_FORMAT_MEANING>
<SET_MEANINGS></SET_MEANINGS>
<C_INDUSTRY_CODE>C</C_INDUSTRY_CODE>
<C_COMPANY_TITLE></C_COMPANY_TITLE>
<C_BAL_SEGMENT_LPROMPT></C_BAL_SEGMENT_LPROMPT>
<C_PAYMENT_MEANING>Payment</C_PAYMENT_MEANING>
<C_RISK_MEANING>Risk</C_RISK_MEANING>
<C_ONACC_AMT_RISK_INV></C_ONACC_AMT_RISK_INV>
<TEMP_ONACC_RISK_INV></TEMP_ONACC_RISK_INV>
<C_RISK_OPTION_MEANING>Do Not Show</C_RISK_OPTION_MEANING>
<GSUM_ONACC_AMT_RISK_INV>0</GSUM_ONACC_AMT_RISK_INV>
<GSUM_RISK_INV_DSP> 0.00 </GSUM_RISK_INV_DSP>
<GSUM_RISK_CUST_DSP></GSUM_RISK_CUST_DSP>
<GSUM_ONACC_AMT_RISK_CUST>0</GSUM_ONACC_AMT_RISK_CUST>
<CF_PAYMENT_MEANING>Payment</CF_PAYMENT_MEANING>
<CF_RISK_MEANING></CF_RISK_MEANING>
<CF_RISK_OPTION_MEANING></CF_RISK_OPTION_MEANING>
<CF_ACCOUNTING_FLEXFIELD></CF_ACCOUNTING_FLEXFIELD>
<GSUM_CLAIM_CUST_DSP></GSUM_CLAIM_CUST_DSP>
<GSUM_CLAIM_AMT_CUST>0</GSUM_CLAIM_AMT_CUST>
<GSUM_CLAIM_INV_DSP> 0.00 </GSUM_CLAIM_INV_DSP>
<GSUM_CLAIM_AMT_INV>0</GSUM_CLAIM_AMT_INV>
<C_CLAIM_OPTION_MEANING></C_CLAIM_OPTION_MEANING>
</ARXAGMW>

hi Rex,
your requirement is u want to show your report parameter in rtf(template).
create a placeholder column get your parameter in the placeholder column.
and run the report to generate XMl.
use the placeholder column in template to show parameter.
Regards
Rajesh

Crystal Report Lines / Boxes not show in Excel

In Crystal Report 2008, I created a report with lines and boxes inserted. I then imported into SAP B1 8.8. The report looks fine in crystal report viewer with all the correct formatting. I exported the report as Ms Excel (with formatting).
After exported to Excel, the report looks fine for the most part but all the lines and boxes are not showing at all. I went back to CR designer and tried to mofify the format of the lines / boxes but they still not showing in Excel. is there any way to fix the display of those boxes and lines?

Hi,
Format like lines/Boxes cannot be exported. If you want the exact layout, print to PDF file may be your only option.
Thanks,
Gordon

Crystal Reports Field Explorer not showing

Hi,
I am using Visual Studio 2003 with the bundled version of Crystal Reports. It has always worked fine until recently the Field Explorer tool bar does not show up anymore when I open a Crystal Report for development. I have uninstalled the entire Visual Studio and reinstalled the Visual Studio but it still will not show the Crystal Reports Field Explorer. However, if I install the Visual Studio on a completely different computer it works fine. Anyone have any idea what could be causing this problem on my main computer? Could it be a setting somewhere in the Visual Studio? I cannot find any information on this problem.
Thanks,
Razzle

Ok, I figured out what the problem was. It was something wrong in my Windows profile. So I deleted my Windows profile and created a new one and it is working now.
Razzle

Crystal report viewer do not show on client computer installation

hi
hope all you are fine
i develop a simple project that show "Hello word My First Crystal Report" on crystal report viewer. after this i add new project "setup and deployment". In Setup Project I add 4 files of .msm for show crystal report.
1. CRRuntime_13_0_tr.msm 2. Microsoft_VC100_ATL_x86.msm
3. Microsoft_VC100_CRT_x86.msm
4. Microsoft_VC100_MFC_x86.msm 5. Microsoft_VC100_OpenMP_x86.msm
when i install on developer computer. it runs successfully. when i install on client computer, software runs fine but crystal report did not show and having error "METHOD NOT FOUND VOID CrystalDecision.WINDOWS.FORMS.CrystalREPORTViewer.SET_CACHEDPAGENUMBERPERDOC(INT32)"
i install .net frame work and CRforVS_13_0_9.exe on client computer but .net frame work show form but crystal report did not show.
Please Help

Hello,
For Crystal repot related question ,please consult on SAP Crystal report forum instead of here.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do I report a video not showing correctly?

I tried to find a Contact Us to "Report an issue" but ended up chasing my tail.
This video is not showing correctly in the frameset during preview.
http://itunes.apple.com/us/music-video/medley-surfer-girl-wouldnt/id504074645
at least ... not for when whenever I tried to watch it.

Most every product Mozilla has is from say a mozilla.org site link.
https://mozillalabs.com/en-US/projects/
https://www.mozilla.org/en-US/products/
The only real video related thing Mozilla has is https://wiki.mozilla.org/Shumway and more info at http://mozilla.github.io/shumway/
The site you downloaded this NewVideoPlayerSetup.exe from was a scam as it uses the inexperience of users and popularity of Mozilla and the Firefox browser to trick people into installing stuff like this.
Next time if you are uncertain you should ask as somebody will then tell you if it is legitimate or not for example.

Reporting Agent: Columns not showing up

After the print settings have been created for a query (in Reporting Agent), all the columns are not showing up. What could be the reason. Someone please help, I will definitely reward.
Farhan

Make sure the in the print layout tab the table nodes has the required columns. You will be able to see the preview of the current setting by hitting the print preview icon on the top of the screen.
Thanks.

Calendar in ios7 on ipad not showing correct month.

After updating to ios 7 on my iPad with Retina the calendar app will not show the correct month in the future. If I scroll back in time the months will change correctly. ie: The name of the month at the top and the dates will change correctly. If I scroll forward in time the name of the month at the top will be off by
one month.ie: If I scroll forward to December, November stays at the top (see attached photo). If I scroll to January, December show up below. I just updated to ios7.04 and it is still doing it.
I've tried unselecting calendar events to show so that it's a blank calendar and that did not help.
Any way I could fix this?
Thanks.

No, the appointments will not "get messed up". If you leave time zone support off the calendar will stay exactly as it was at home. If you turn on time zone support for the new time zone you're in ( or other country ) the appointment times will change or convert to times and days in that zone or country. When you turn off time zone support after returning home it'll all convert back to that time zone.
Example. You have an appointment (10am Thursday) with Joe in your hometown in Chicago. On Tuesday you fly to Tel Aviv and switch Time Zone Support on for Tel Aviv. The calendar will show the upcoming appointment with the newly converted time and date in the calendar. At that new time and date of the appointment it'll be 10am Thursday back home.

Plan / Actual Comparison Report - S_PL0_86000029 is not showing one month

Similar Messages

Maybe you are looking for