Plan actual consumption report
Dear All,
The client want to see a report
where the planned consumption of quantity mentioned in the BOM and the actula consumption at conformation along with the standard price of sfg.
he wants to get the difference per unit of standard& actual.
this is basically he wants without overhead .
any suggestion
Hi,
Plz chk the t.code:KOB1,Before That create consumtion cost element group.So u can get plan and actuval consumtion and quantity at each production order wise.
Regards
Nagaraju sami
Similar Messages
-
S_ALR_87013340-PRCtr Group:plan/Actual Caomparison Report performance issue
I'm trying to get the "actual line item" details from the S_ALR_87013340-PRCtr Group:plan/Actual Caomparison Report and I get a
ABAP run time error. I tried to running for just one month and on several accts. please help to me. how to get the report.
or how to improve the performance of this program.
Thanks in Advancehi,
first we need to know what part of the code is taking time. Do run time analysis using SE30 transaction to know what part of coding is taking more time. use can ST12 transaction to get more detailed analysis.
Since this is standard SAP report also check any OSS note exist for the performance problem. -
Plan, Actual & Commitment Report in Multiple Currency
Dear SAP gurs,
Is there any report where I can see Plan, Actual & Commitments in Multiple currency (see below format). In standard SLAR reports, values are displayed in one currency at a time either I can see in INR or USD.
Here each WBS is planed in USD as well as in INR. If PO is raised in USD, then actual value should be shown against planning done in USD.
WBS Elem Plan Actual Commitment
USD INR USD INR USD INR
WBS1.1 3000$ 1000INR 500$ 500INR
WBS2.2 50000INR 10000INR 300INR
Thanks,
VenkatDear Venkat
Each of the views in the hierarchy reports (such as 12KST1C) can
only contain values for one currency at a time (because totals for
multiple currencies would not make sense).
Since only one currency can be displayed at a time, the Trans.currency view is not meant to show values in multiple currencies; rather, the Trans.currency view only provides a reference to the user of the currency involved in the Plan and
Actual postings. For example, if the actual postings had been in
mixed currencies like:
Doc. date Cost elem. Value COCurr CO.Cr Value TranCurr TCrcy
01-07-2007 911010000 800 XXX 1700 YYY
01-07-2007 911010000 3,000 XXX 3,000 XXX
Then the Trans.currency view would have contained:
Trans.currency Plan Actual
YYY 0 800
XXX 3,700 3,000
Result 3,700 3,800
You can always switch between currencies in the report Settings ->
Currency, but only one will be displayed at once.
I hope this explanation helps you to understand the standard system
behaviour.
Regards
Martina -
Planned & Actual Production report
Hello all
MY requirement is , i need to add this two req in the one report ( Z transaction ),
Planned Production - This must show the production plan for the current week only. We should be able to drill in further and see the actual day of planned production, we should also be able to see forward plans for the next 3/4 weeks by day.
Actual Production - This should show the amount of stock physically produced against the planned qty
How can i get this all information ?, what logic i need to tell the developer? , In which table i will get all the inforamation?.
Please help me out in this.
PiyushDear ,
SAP has given a fabulous report called -Order Information System -COOIS where you can play around your every requirement which you are looking for .Here , you various selection criteria .Let me explain based on your rquirement :
1.Select Item -Select Standard Profile and Enter Plant , Order Type , ( Optional -Material /Production Order ) execute which will display all the related information .Now you have to goto -Change Lay out option in the top and drag and drop all of your filed like
Like wise , you can get as many infoamrion as you can based on selection procedure .
However , I have developed another report which is based on COOIS for different busness requirement and sharing you the few field mapping : All the field will based on AFKO /AFRU/AUFNR
WERKS AUFK-WERKS, "Plant
AUFNR AFKO-AUFNR, " Prod. Order No.
PLNBEZ AFKO-PLNBEZ, " Header Material No.
GSTRI AFKO-GSTRI, "Actual Start Date
GLTRI AFKO-GLTRI, "Actual Finish Date
GAMNG AFKO-GAMNG, Prod. Order Qty.
AUFPL AFKO-AUFPL, "Planned No. Of Operation
AUART AUFK-AUART, Order Type
ISM01 AFRU-ISM01, "Required Qty.
VGW01 AFVV-VGW01, "Quantity Withdrawn
VGE01 AFVV-VGE01, "Unit Of Measure
EFFPERC AFVV-VGW01, "Eficiency %age
MAKTX MAKT-MAKTX, "Material Description
Try and let us know if you need farther help
Regards
JH -
Planned /actual cost report in iw31
Hi Gurus
Is there any method to see individual component cost while creating order (IW31) in pm. I tried with planned/cost report button on the cost tab by including material and material text in the layout, but when I execute the material and text is blank and I am unable to see individual material wise cost.
Kindly help.
Regards
VidhyadharanYes it a business requirement.
while creating reservation, the user should be aware that he is drawing a high value item.
for eg. One of the component of the Assembly has failed, and it has to be replaced, the stores does not have the stock, it takes time for that component to get reparied, since it is time consuming,and the production been affected, the engg replaces the entire assembly by drawing from the stores. Since the engg does not know the cost, he should be made aware that he is drawing a high value item from the stores , which he has to take an oral approval from the higher authority.
Regards
Vidhyadharan -
Plan / Actual Comparison Report - S_PL0_86000029 is not showing one month
Gurus,
The TCode, S_PL0_86000029 when being run for just one month, e.g. August (08.2008), it shows the figures for the whole year.
Being the first year on SAP; the month this went GO-LIVE was October.
Data before that since 01.01.2008 till 30.09.2008 was uploaded.
How do we just break it down to one month?
This is quite important.
Thanks.
Edited by: Bhatia on Oct 16, 2008 10:34 PMHi Rau,
Could you please me How to Upload the GL or Open Item Balances on Month to Month Basis? for this we still use FB01 for Initial Upload?
My Client is giving the balance for last year Monthly with daily Transactions with past Posting dates obviously,do I need to Upload with same Posting dates or with Current Posting date?
For reporting Purpose My Client would like to see Monthly Balances of Open items for Initial Upload,"is this same as Month to Month Upload you advised above"?
What is the Difference b/w Month to Month ORr Just one Amount as total balance uploaded to SAP? which is Best Practice before Initial Upload?
Thank you ,
Paarthaa... -
Problem while running the Profit center Plan/Actual Report in Background
Hi
While executing the T.Code s_alr_87009722 (Profit Centre plan/Actual Comparision Report) on fourground it is giving all the profit centers/groups in the particular profit center group. But when i run the same report in back ground mode it is picking only the last profit center in that group. Please help me regarding the same.
Regards
Suryahi prakash ramu,
even it is not working. it is directly talking me to spool request..
i think it is not possible, while ur running the report in background.,
any how if possible could u pls send me the code...
thanks
ramu -
S_ALR_87013326 - Profit Center Group: Plan/Actual/Variance
Hi,
I am looking to branch off from a line item in the S_ALR_87013326 - Profit Center Group: Plan/Actual/Variance report to the actual posting document. Is there a way to do this?
Thanks,
Ram
Message was edited by:
Ram RHi Nadini,
Thats cool. I have assigned points.
Another question. S_ALR_87013326 shows balance sheet accounts as well with zero balances. Is there a way to eliminate these accounts or populate them with the relevant values.
Thanks,
Ram -
Plan v/s actual materail consumption report for production order - urgent
Dear all Hi,
Is there any report or T code from which i can get the plan v/s actual material consumption for a production order or wbs element after completion of order, please suggest / help, the requirement is very urgent.
thanks in advanceHi shaiz,
You can get that in COOIS tcode
Select components again List
then give the plant,Order details
execute
You can find 2 fields reqmn qty(nothing but planned) & qty Withdrawn(Actual consumption) in the report
Hope this hepls
Rgds,
SVP -
Reporting for PIRs: actual consumption against plan
Hi all,
can you recommend what standard reports can show actual consumption figures against plan in PIRs. Collective report is needed, looks like rows with columns for material code, plan figure, consumed figure and this is for given periods. And plan figure should be quantitiy without reduction quantities (that is initial quantitiy in PIR).
Thanks in advance!Vivek wrote:
I would still suggest, use the report (shouldn't take more than 30 mins. of your time) & it would greatly help in your 'estimation effort'.
Thank you for your suggestion.
I can start this transaction (MD73) and see some figures, but cannot make GI due to some reasons in existing environment (migo goes into dump). That is why I'm asking about reduction, what results will be showm by this report - planned figures as originally planned or reduced ones after issuing. -
Planned and actual consumption for each confirmation
Dear All,
There is a production order. it has two operations. i have made three confirmations of each operation for that order. now i want to see the planned and actual consumption for each confirmation. how is it possible.
However i know that on order we can see planned and actual consumption but it is for total order but i want to see planned and actual consumption for each confirmation. Actually client wants that on 2nd confirmation what is planned consumption and what they consumed on actual. thanksHi,
In standard SAP this type of report not be there, but u can make it by using BOM,Confirmation table, & material document table.
Use AFRU to get posted document no for confirmation & detail by joining it with MSEG by mblnr & MAZHR.
now u get plan component qty by using mast & stpo if ur bom not changed in Production order , if in order component may be change then use afko & resb table & by comparing base qty or order qty & confirmation qty get plan component qty for confirmation.
Thanks
Rakesh -
PS (plan vs actual costs) Report
Hi,
I have to generate the above report. How can I diffrentiate between Plan cost and actual cost. Is there any business contect report for this ? can anybody throw light on this.
Regards,
BillHi Bill,
There is no std content for this as far as I know , Not sure if your report is based on cost for a given version then its really a mystery . If you are looking to pull the cost for PS then check the table RPSCO in r3 , this is the PS cost table , and you can differentiate Plan/Actual based on the Field Value type .
hope this helps , -
Plan/actual variance per month in a single report
Hi gurus,
MY client requirement is to get the plan/actuals/variance on monthly basis.
can we get that
i said S_ALR_870100185 actual costs montly
S_ALR_870100186 planned costs monthly
please dont say we can achieve it with a new development because i even have the same answer
they need a joint report of these two can we get that
its an urgent issue
thanks in advance
regards
hussainHi,
Check these URL's,
https://docs.google.com/leaf?id=0B5VK9X3nnz9rOTIyZGU5ODMtZGUxZC00OTJiLTg5OWMtNjBkOGVkNTRjZjIw&hl=en_US
https://docs.google.com/leaf?id=0B5VK9X3nnz9rNzAxMmNhZjEtMTA2Ni00OGE1LWE2ODctMDM2MTNkNTI4ODQw&hl=en_US
I have uploaded them in google docs.
Check if you can open them.
Regards,
Gokul -
Commitments at activity level in report S_ALR_87013533 - Plan/Actual/Commit
Hi All,
When i executed the report S_ALR_87013533 - Plan/Actual/Commitment/Rem.Plan/Assigned, the commitments are shown at WBS level but not at activity level. Is there any setting required to see the commitments at the activity level?
Where as the planned costs are shown against the activity in the same report.
Please suggest the required settings if any?
Regards,
Ramana.HI Rifaee/Martina,
In CJI5 the line items are shown under the WBS. But i would like to see the line items in the report.
Even after running the report cjen the database is not updated for line itemwise commitment in the report.
How to assign the PR/PO as account assignments to activity? Where do i need to do this setting? Please inform.
Regards,
Ramana -
Hello all,
when running the report,it can be seen in SAP screen by cost groups and by cost elements.
The problem is that when user tries to save report in local file, then it is not able to see cost center distribution. User can only see cost elements amounts.
is there a way we can save on a local file cost groups as well?
Thanks in advance for letting me know
regards
HanaHi,
Look for data source 0CO_OM_CCA_1 ( Cost Centers: Costs and Allocations ) ..it will give you the plan / actual /commitment amounts & qty.
Link is http://help.sap.com/saphelp_nw04/helpdata/en/8d/1f383fe58d5900e10000000a114084/frameset.htm
Hope that helps.
Regards
Mr Kapadia
Maybe you are looking for
-
HELP! Upgrading Graphics Card on Mac Pro 2009
Hi all, I'm interested in upgrading my current graphics card NVIDIA GeForce GT 120 512 MB to something with more memory. I'm having a hard time trying to figure out which brand to go with that'll be compatible with my Mac Pro 2009 model and will work
-
Can't I/O select a keyword clip?
I have a bunch of clips in an event. I have gone through these clips making selections and assigning keywords to the selections (such as "man plus car" or " happy face". In some cases I have assigned keywords to the whole clips too (such as "day 1").
-
Hi Guys, I am at my wits end as to how I can solve this. I really can't find a solution, I hope you can help. I have a gui layout thus: JTabbedPane -> JScrollPane -> JPanel -> JPanel (instead of awt.canvas) I have multiple java2d 'graphs' that I wish
-
Is document compare supported in Pages?
I have been using Pages in lieu of Word for some time now but I need to compare two documents. Is there a function in Pages that does this? It is very simple in Word but if it's not in Pages, then this is definitely a let-down. Thanks.
-
I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but I'm having trouble with the new one. Wh