Plan B?  - Where is it?

They should have learned 1 year ago...
They had months to plan for this....
Months to do lots of load testng....
Months to have a Plan B...
The only thing clear to me....All that fresh money from recent Apple success - spent on the design team and not the operations teams....

That would require a Plan A, which there isn't. Upgraded and increased servers, increase network bandwith. Doh!

Similar Messages

  • Reorder Point Planning VB where GI against reservation not happening

    HI Every one,
    Manual re order materials which has got created
    Manual Re order Level 50
    Safety Stock 30
    Stock exists 54
    Reservation created when only 4 stock was there after that received 50 quantity.Now Creating Goods issue against that reservation But system issues error Message M7 181...ATP stock available only 4.
    And No Planning materials GI against reservation happening properly
    Let me know what will be the problem..
    Thanks,
    Bindu

    Hi Jurgen,
    Now i am explaining you clearly in detailed with MD04 and CO09 details....
    Material XYZ with Manual Re order level VB 600 and Lox Size FX and Fixed Lot Size 400 Maintained.
    Reservations created with 52 Qty on 02-09-2008,104 Qty on 16-09-2008,52 Qty on 07-10-2008,52 Qty on 18-10-2008,52 Qty on 25-10-2008,52 Qty on 28-10-2008,80 Qty on 03-11-2008,50 Qty on 24-11-2008,100 Qty on 24-12-2008,80 Qty on 25-01-2009,180 Qty on 08-02-2009,80 Qty on 24-02-2009
    Total 12 reservations created with 834 Qty and Present available Quantity is 520... which is showing in MD04 and in CO09 there are 3 TABS Rec Reqd Qty - 520 and Confirmed - Nil and *** ATP Qty =0  ....
    When i am creating Goods Issue against first reservation the system issues error message as 2 qty available..on 26-02-2009 as M7 181 ATP Qty not available...
    Please let me know the solution why the system issuing error message eventhough 520 Qty available.
    Regards,
    Bindu

  • Planning Material Where-Used list

    Hi All,
    I wish to know in which materials and plants a Planning Material has been used. How is it possible?What are the transactions involved...kindly help!!!
    Thanks & Regards,
    Deepak Prasanna S

    Deepak,
    I think your query was on planning material which is getting assigned in Materail master MRP3 view. The data should be available in MARC table, right now i dont have access to system to check the field for Planning material, you can check it place your cursor in the planning material field and then use F1 key in key board in the popup screen hit the technical information button to get the field and table details.
    You can use transaction SE16 or SE11 to get the data from table, if you want this to be used frequently then you can create a query using SQVI transaction.
    If your are looking for whereused list of a component in BOM then CS15 will do.
    Regards,
    Prasobh

  • Report for Planned vs Purchase Order(Qty and rate)

    Hi
    I have the following issue. My client is raising Purchasing requisition and Purchase Orders in Me51N and ME21n respectively. The Project Structure is used only to plan the quantities and rates whereas no PR is released from it. But the components are attached. Now if i make use of the code CN52N, i am getting the planned quantity and unit rate for the planned value whereas no Purchase requisition number or purchase order number is updated in it.
    My requirement is that both planned quantity, rate along with Purchase order quantity and rate should be available in a report.
    1. Is there any setting that we can make so that the details are updated in cn52N (or)
    2. is there any other report with those details (or)
    3. Should that be achived only through ABAP.
    Please suggest.
    Raghav

    There are a few reports that you can use to display STO requisitions and orders, by supplying plant, material, or MD04 like was mentioned.
    The only thing that you don't have in a report is the link to the production order. In SAP in a MTS situation there's no fixed link (pegging) between the requirement (STO) and the supply (prod Ord).
    You can view the pegging dynamically, for example in MD04.
    Edited by: Mario Adler on Oct 27, 2011 12:13 PM

  • Maintance jobs with Maintenance plans - troubleshooting

    Some of our old servers have maintenance jobs created with inbuilt mainteance plans. We find difficulty in troubleshooting these kind of jobs when it fails. Can anyone shed a detailed analysis of how to troubleshoot these jobs which are created with maintenance
    plan like where to look, any system table/view that could help etc. The job history gives very minimal details and often result in cropped off messages.
    I was told that if we alter the maintenace plans associated with the jobs and save it. It will break the job, is it so?

    For SQL server 2000
    You can check the failure logs either from jobs or Maintenance plan history
    In enterprise manager, expand the server group
    Expand the management folder and select the database maintenance plans
    Right click the maintenance plan that failed and select the Maintenance plan history
    Check for the failure occurred and double click the failed row to see more details or on failure
    Similarly from SQL server 2005 onwards maintenance plan history, you can check from maintenance plan
    In SSMS, connect to SQL instance
    Expand the Management folder and select the maintenance plans
    Select the maintenance plan and click on maintenance plan history and check for the failure
    Please click the Mark as answer button and vote as helpful if this reply solves your problem

  • Planning on WBS elements without cost elements

    Hi all,
    we are trying to implement the planning solution where users will be able to plan on individual WBS elements monthly but without providing a breakdown on cost elements. Standard SAP planning profiles allow to post plan values on WBS elements in annual view without cost elements. But when you want a monthly view the system you need to click on primary cost elements planning first.
    Is there any way to plan monthly but at cost object (WBS) level only?
    Many thanks,
    Roman

    Hi Eli,
    thanks for your response. We will be using budget functionality for budget purposes but at the same time we will need to use planning on different versions. I believe there are no versions for budget.
    One of the idea to minimize cost element planning is to introduce like a planning cost element to use with all planning postings and then include this into the same cost element group with the rest of cost elements for plan/actuals comparison reports.
    If you have something in your mind I would appreciate your input.
    Thank you,
    Roman

  • Problem adding a new field to existing BPS planning layout

    Hi
    I am new to BPS and planning
    I have a requirement to add a new field which has values maintained as 0 and 1 to an existing planning cube.The user wants this new field in the existing planning layout where in he can enter the values for this field as 0 or 1.I have created a new field and maintained values for this field as 0 and 1.I have added this field to the existing planning area and have created variable with fixed value with range 0 to1.I have added the same in selections in existing planning level and package as well along with other existing selection conditions.
    In additional functions of adhoc package they have made setting as set to all possible char combination.
    In this planning area all the selections are locked in planning level and package.
    Now when i execute the planning layout to enter data,my new field is grayed out,it does not allow me to enter the values.need help  with this as to how can i make this field input enabled.This is an independent characteristic.
    Thanks
    Panchan

    Hi,
    Yu need to delete the data to fill the new field again.
    Assign points if it helps
    Regards,
    Srinivas

  • Filter and general access issues from planning to essbase

    Hi all,
    V 9.3.1 Planning
    I am working on a planning system where the business owners would like to restrict the lock and sending of data via smartview. Basically, users are bypassing parts of planning and going directly to essbase rather than forms. They had individual user filters setup but they would like to move to groups. I am using the importsecurity utility to try and achieve this. However, the access granted and filters are producing the following behaviour
    1)Group has essbase write access - if this is enabled there appears to be unrestricted access via smartview. Take it away and #NoAccess appears despite security being applied to certain members using the importsecurity utility. I have read that this can be a bit of a loose canon when granted and conflicts with filters.
    2) Cannot create filters - I wish to remove all user filters from within planning. However, the importsecurity sl_clearall command doesn't clear them (as I thought it would but appear to be wrong). I cannot create any filters. An error appear saying 'Failed to create Security Filters for the following users: xxxx' Is it possible to delete the filters?
    3) If I refresh the security filters I get errors saying 'the following filters could not be created' but they are in EAS (I deleted all filters before hand). I have run the updateusers utility which tidied up msad users but still errors are reported.
    The objective is to restrict each group to be able to write to the permitted part of the application and read where necessary. The permissions in planning need to match essbase.
    I would appreciate any help.
    Thanks,
    Nathan
    p.s this is the same app relating to the thread about the application owner posted yesterday for those who viewed or commented :)

    Knowledge base had some useful articles on this.
    Edited by: NathanG on 07-Jan-2011 03:14

  • Where can I find a downloadable benchmark for the MacBook Pro?

    I have a 2013 MacBook Pro and a 2006 Mac Pro. I am thinking of dumping the Mac Pro and make my MacBook my one and only computer. I want to run a benchmark on each system to see what I am trading off with this plan. Where can I find a downloadable benchmark for a Mac running OS X?

    Geekbench -> http://www.primatelabs.com/geekbench/.
    Clinton
    MacBook Pro (15-inch Late 2011), OS X Mavericks 10.9.5, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

  • Where is the "blur kernel" one click deblur in Photoshop CS6?

    Where is the "blur kernel” one click deblur in Photoshop CS6? (Pretty sure it’s not there.)
    Is deblur still in development? Or was it killed? Is there any status update on the progress of the deblur function? An overwhelming majority of the information available reference the same October 2011 Adobe Max conference demo.
    (Adobe showed off the new deblur prototype at its Adobe Max conference in October during a set of feature sneak peeks...)
    The way the feature was described was:
    "The prototype feature uses a computer algorithm to analyze how the image was blurred and then creates what Adobe called a "blur kernel." After the kernel is generated, it can show you information such as what the motion trajectory of the camera was while the shutter was open -- causing the blur in the first place. The next step is to simply hit a "restore sharp image" button and the photograph is fixed."
    It was cited by some sources as being an upcoming Photoshop CS6 feature while other sources were more vague with statements resembling "It's not clear if or when the new unblur feature will make it into a future version of Photoshop, as the company warned all sneak peek features were just prototypes with no concrete product plans."
    Where is the latest with the Adobe Photoshop "blur kernel” and the Adobe Photoshop one click deblur feature?

    one of the things I think about as an engineer is that in order for something like this to work,  you should probably start with manuals adjustments to processing the the out-of-focus blur first. after you have finished with this, you can do the motion blur.  I would have to really think hard about it to see if there is an algorithm such as a kernel or something to convert an image into a path. one problem is you are stuck with the image boundaries. if they weren't there, things would be so much easier (but it would also take infinitely long to process).  the image boundaries MIGHT skew the kernel, depending on how you handle the boundaries (for example, usually you just assume those values are black or 0's, or you may choose a 50% gray, whatever fits best with the kernel you are working with).
    adobe may be on to something there, but they only had half of the equation with the idea.
    I used to tinker with image processing many yarns ago back for fun in BASICA/GWBASIC.
    if you have the kernel
    [-2 0 2]
    [-2 0 2]
    [-2 0 2]
    which amplifies vertical lines, you would want to handle the boundaries by processing them as 0's.
    NOTE TO ADOBE: it might start getting into Machine Vision technology when you start doing the path recognition. or AI.
    if you can get the imge into a path kernel, it's essentially a bitmap of a path.  you can trace that path using akima spline curves. (will lose 1-2 samples off each end), but the tracing program might just exist out there somewhere.  just google "bitmap to akima spline curve".  and akima spline curve has all the
    points along its path, unlike a bezier. I like akima spline curves, I have been trying to get ps engineers to use them for a while for good reason. this is one of them.
    there are also cubic splines as an alternative. 
    chances are that the curve will have rounded corners due to the weight of the camera.
    now that you have the path,it's simply a matter of taking samples along the curve wherever you want. (usually in an array which you can linearly inerpolate across the points in the array for simplicity if you want)

  • Lot quantity to order for a material set as reorder point planning

    Dear All,
    Suppose the requirements of a material are as follows:
    Week1 Required quantity - 100
    Week2 required quantity - 150
    Week3 required quantity - 300
    Week4 required quantity - 500
    This material is set as "VB" (Reorder point planning in the material master)
    My questions is:
    Can we use periodic lot sizing procedure for a material planned based on reorder point planning , so that MRP run will consider the requirements of a month (1050) and use that as the lot size to order material.
    We want to plan the material if it falls below the reorder level, but we want the system to dynamically calculate the quantity to order based on the actual demand (and not on either fixed lot size or maxmimum stock level).
    with regrds
    Laxmipathi.G.V

    Hi
         Use Anyone of the following
    1. Use automatic reorder point with forecast planning requirment.Where ssytem will calculate reorder point automatically based on weekly /monthly Forecast req.In this case Lot size you can use EX itself.
    2. Use Planning type PD and lot size EX and Instaed of ROL use safety stock so that system will consider weekly sale req. and  also safety stock according to that procerement proposal will be created.
    Regards,
    Velmurugan S

  • Help with Planning Query - 0CALMONTH not showing up

    Hi, I have a simple planning query where I am trying to allow users to input or change an Amount by Material/Month.  The User inputs a Version and a Date Range to maintain.  The selected dates should show up going across the screen even if there is no existing data.  These Variables are in the Query Filter along with a few other characteristic Filters.  So in my query I have 0MATERIAL in the Rows and I have 0CALMONTH and my Key Figure.  Under advanced for the characteristic 0CALMONTH it is set as Master Data.
    When I run the query for some reason the 0CALMONTHS do not show up going across.  If I run the query and put in one value then the 12 months show up.  Seems like a bug.  I have another similar query where this works.  Can anyone take a look at the screen shots and help me figure this out?
    [Query Def Screen 1|http://i35.tinypic.com/1h8con.png]
    [Query Def Screen 2|http://i36.tinypic.com/1f781c.png]
    [0MATERIAL Def|http://i36.tinypic.com/xefq8i.png]
    [0CALMONTH Def|http://i35.tinypic.com/ej8qpv.png]
    Thanks!
    Edited by: Kenneth Murray on Nov 5, 2009 3:12 PM

    Dear  Kenneth,
    I think its a bug.  If we post the value without the drilldown on 0CALMONTh then its open for the input, and after that if we drill down it with 0CALMONTH for same selection, it opens for input.  but for new selection of month it not opens.
    Have you solved the problem?
    Regards,
    V B Udani

  • Looking to get a data plan for the sole purpose of playing online video games

    Hi everyone,
    I live in the mountains of Pine Valley, CA and the seclusion is becoming intolerable.  I'm looking to get a data plan with Verizon to play online video games, namely Diablo 3 or failing that due to latency, then Civilization 5.  Can anyone give me pointers on if this would work and what plan I could get?  Currently, I have a plan with Boost Mobile which uses Sprint cell phone towers.  I tested my internet connection with speedtest.net and received a ping as low as 140 and as high as 1000, but I'm hoping the 1000 is just due to reception issues that can be fixed with a better antenna.    The 140 ping is a little high too but I'm hoping this will be better on the Verizon network since I think their cellphone towers are closer.  The closest landmark to me is the Golden Acorn Casino at 1800 Golden Acorn Way  Campo, CA 91906.  If anyone could tell me the distance from Verizon's cell tower to the casino and Sprint's and could estimate a ping value based on that, I would really appreciate it.
    I like Verizon's data plan for 10gb but I'm confused on device connectivity.  Is this the data plan plus whatever router device I hook it up to? I would also need some sort of antenna and a router, wireless or wired.  Can anyone give me pointers on how to find these?  An estimation on Ping and bandwith speed and also on peak hours in my area would be nice too.  Thanks to anyone that can help me with this!  Oh, and while I don't think my area has coverage for 4g, though I'm pretty sure there is 3g, would I possibly get 4g if I had a strong enough antenna?

    Homefusion comes with antenna that is mounted OUTSIDE of your dwelling. That why they send someone out to install it. It also comes with the router. You're thinking of Share Everything data only plans. Where you pay $20 for the mi-fi and then pay extra on the data pending how much you want.  Share Everything with a mi-fi and 10 GB would be $80 a month when you can get Homefusion for $60 for the same 10 GB. An considering the antenna is more power and outside you're a lot more likely to get reception with Homefusion. In either case it should be noted you'll need to pass a credit check and sign a two year contract.

  • Hyperion Planning: Is it recommended to edit the default dimension name?

    Hi,
    We have created a new Planning application, where we have default dimensions (Account, Period, Year, Scenario, Version & Entity) created automatically.
    1. Can we edit the default dimension name as per my requirement?
    2. If so, will there be any impact if we edit?
    Note: Just created Planning application only. Database is not yet created.
    Your help will be highly appreciated.
    Thanks
    Dhamu

    But it's not recommended to change any standard dimension names in planning application.^^^Really? Why?
    Regards,
    Cameron Lackpour

  • Using OR operator in the WHERE clause in Oracle BI

    Hi, i am using Oracle BI EE 10.1.3.3.3.
    I construct the simple report in BI Answers on the Accounts presentation layer, and use the following filter clause:
    "WHERE (AccountNum BETWEEN '441' and '473') OR (БалСчет1Порядка BETWEEN '501' and '519')"
    Then i look in the cursor cache and find the real query which is going to database, and it's "where" clause now is:
    "where ( (T45172.BA >= '441' or T45172.BA >= '501') and
    (T45172.BA >= '441' or T45172.BA <= '519') and
    (T45172.BA >= '501' or T45172.BA <= '473') and
    (T45172.BA <= '473' or T45172.BA <= '519') ) "
    Why BI create so many expressions instead of the source 2 expressions?
    How can i force BI to use the source expressions?

    I have the same settings too.
    I post the following query in the Administration web interface, and set the maximum logging level (7):
    SELECT "Plan Account"."Balance Account" saw_0
    FROM "Plan Account"
    WHERE ("Plan Account"."Balance Account" between '441' and '473')
    OR ("Plan Account"."Balance Account" between '501' and '519')
    ORDER BY saw_0
    And got the following BI execution plan:
    RqList <<5619441>> [for database 0:0,0] distinct D1.c1 as c1 [for database 3023:44913,46]
    Child Nodes (RqJoinSpec): <<5619450>> [for database 3023:44913:DB,46]
    RqList <<5619277>> [for database 3023:44913:DB,46]
    D1.c1 as c1 GB [for database 3023:44913,46]
    Child Nodes (RqJoinSpec): <<5619360>> [for database 3023:44913:DB,46]
    RqList <<5619284>> [for database 3023:44913:DB,46]
    Dim - Plan Account.BA as c1 GB [for database 3023:44913,46]
    Child Nodes (RqJoinSpec): <<5619350>> [for database 3023:44913:DB,46]
    TB_PLAN_ACCOUNT T45172
    DetailFilter: (not Dim - Plan Account.BA < '441' or not Dim - Plan Account.BA < '501') and (not Dim - Plan Account.BA < '441' or not '519' < Dim - Plan Account.BA) and (not Dim - Plan Account.BA < '501' or not '473' < Dim - Plan Account.BA) and (not '473' < Dim - Plan Account.BA or not '519' < Dim - Plan Account.BA) [for database 0:0]
    ) as D1
    ) as D1
    OrderBy: c1 asc [for database 0:0,0]
    and following query sent to database:
    -------------------- Sending query to database named DB (id: <<5619277>>):
    select distinct D1.c1 as c1
    from
    (select distinct T45172.BA as c1
    from
    TB_PLAN_ACCOUNT T45172 /* Dim - Plan Account */
    where ( (T45172.BA >= '441' or T45172.BA >= '501') and (T45172.BA >= '441' or T45172.BA <= '519') and (T45172.BA >= '501' or T45172.BA <= '473') and (T45172.BA <= '473' or T45172.BA <= '519') )
    ) D1
    So, i got the same bad where clause...
    What can you advice?

  • Regading Variable in Planning function in integrated Planning

    Hello All,
    I have a requirement where i have to run a planning function to copy the data of one key figures to other.
    But i need a input screen before execution of this planning function where i could insert the characteristics values for which i do not need this Planning Function to be Executed.
    Please let me know how to do this.
    I think this can be done using input ready variables.But i m not sure.
    Regards,
    Pratighya

    Hi All,
    With regards to the above issue, I have similar question and appreciate any inouts.
    Used a Planning function - type FORMULA
    Function needs an Input parameter to execute.
    So I want to create a Planning IP variable and assign it to the function call in my formula.
    From the Front end WAD/BEX - want to exceute the planning function by passing inpur value.
    Regards
    Rao

Maybe you are looking for