Plan C not working either

Noobie here built a multi-video player interface that works
flawlessly in testing, but after uploading all my files to my
remote server, it doesn't show up on my Web page. I saw in response
to a similar problem that the FLV MIME type is required of the
server, but a couple of other flvs on the site work fine, so I
don't think that's the issue.
The problem page is here:
http://www.mgibsondigital.com/video/theater.htm
Thank you for any help or suggestions you can offer.

More info:
The embedded swf file is loaded (119014 bytes):
http://www.mgibsondigital.com/assets/flash/GalleryTemplate.swf
When I load the SWF alone, no further requests are made to
the server.

Similar Messages

HT1222 I just installed this update and now I cannot access "Mail" at all. I tried reinstalling the program, but that does not work, either. Help!!!!!!

I just installed this update and now I cannot access "Mail" at all. I tried reinstalling the program, but that does not work, either. Help!

Paldeng, thanks for the suggestion. I've done all that. I can connect to the server, but apparently they are not recognizing my ID and password. I can use the server program if I don't go through Mail (using the same ID and password). My mother in another state with another provider has had the same email issue, as also my husband on his laptop who uses the same internet connection I do. His worked fine until we had it repaired at the Apple store and all the original programs reloaded (with the required updates, I assume). We can receive email in Mail, we just cannot send.
I contacted my service provider, and we went over my connections. They said it was not their problem and connected me with Apple, resulting in a charge to me because my warranty is long expired. Apple swears it is not their problem, it is the provider, so here I sit. My son was able to fix my Mom's Mail (she's 97) and got my husband's working also, until mine went out, by tweaking connection descriptions and ports remotely. The thing is, we had not messed with any of those settings, so what changed? I just did not want to bother my son again, as he has many other demands on his time.
Since this fiasco with the Mail v4.6 update, I'm wondering if something else was updated that works well with Lion and Mountain Lion, but does not work well with Snow Leopard and Leopard. I think the problem I had with the Mail update was that my Mail program had been renamed to Mail (original), and therefore was not being recognized by the update. Perhaps they had another tweak in there somewhere that is affecting outgoing mail connections?

I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either

I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either it says that i have a newer bootcamp version. I tried a few tricks but they didnot work. I hope to be helped

Welcome to Apple Support Communities
You can install a 64-bit Windows 7 or Vista version in your Mac. Make sure you downloaded these drivers > http://support.apple.com/kb/DL1630 Also, if you have the Snow Leopard DVD you used to upgrade your Mac or the OS X DVD that came with your Mac, you can use it to install the Boot Camp drivers

Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

SPA3000 F/W 3.1.20(GW) last digit repetition within the dial plan is not working for gateway 0-4

H/W: SPA3000
F/W: 3.1.20(GW)
Problem: The last digit repetition within the dial plan is not working for gateway 0-4.
Line 1 Dial Plan: (****|<#,xx.<:@gw1>|1747xxxxxxxx.<:@gw1>)
Dial "17474743246#" which works for gw1.
Dial "#17474743246" which also works for gw1.
Dial "17474743246" which doesn't work and actually goes through VoIP 1 but not gw1.
It results in I have to specify a fixed number of digits for gw0-gw4 in the dial plan or it won't works. This could be very difficult for international calls.
Is there any way to specify Interdigit Short Timer with <:@gw0>?
BTW, it's strange that I have to include (****) in the dial plan to enter IVR. Without it I can't even hear any sound coming from gw1 (SIPphone). Maybe the SPA needs a factory reset. The test dial plan might look like,
S:4,(****|*xxx.|[2-9]|xxxxx|*0<:@gw1>|1747xxxxxxx<:@gw1>|1408xxxxxxx<:@gw0>|xxxxxxxxxxxxxxxxxxxx.!)
The last barring sequence "xxxxxxxxxxxxxxxxxxxx!" is to make sure the Interdigit Short Timer works after the last digit dialed otherwise the number will be transmitted immediately which is not preferred.

IMHO , if there's a need for you to include *** on the dial plan to enter the IVR menu there might be a need to reset the unit.
I believe that you can set the interdigit timer by including that on the dial plan ie: xxxxS0 just like on a hotline, i just never had a chance to try including that syntax when invoking gw0 on the dial plan , but i guess you may give it a try.

I cannot past with the lastest version. CTRL V does not work either

I cannot past with the the most recent version released today. CTRL V does not work either
== This happened ==
Every time Firefox opened
== When my system updated the newest version today

Issues with the right-click context menu not working can be caused by the [http://toolbar.yahoo.com/ Yahoo Toolbar] (Tools > Add-ons > Extensions)
See:
[[Troubleshooting extensions and themes]]
http://support.mozilla.com/en-US/forum/1/380010
https://support.mozilla.com/en-US/forum/1/552540?
https://support.mozilla.com/en-US/forum/1/472971
Also see:
https://support.mozilla.com/en-US/kb/Clipboard+not+working
http://kb.mozillazine.org/JavaScript#Advanced_JavaScript_settings
http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. ~~red:1.5.0_02 (very old)~~; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''NOTE:''' Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. '''''At this time''''', the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; '''''at this time''''', it must be manually downloaded and installed. According to the Java release notes:
''"'''Bug Fixes'''''
''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
'''You '''~~red:'''MAY'''~~''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates. Allow the download/update to occur. If you use this method, no need to proceed with the instructions below, '''but''' do look at the two bulleted items at the bottom "'''NOTE for IE:'''" and "Also see:". Restart Firefox and check your new version here: http://www.mozilla.com/en-US/plugincheck/
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I'll have to get a better instructor on deleting the preferences since when I've doen it in the past nothing is there when I open LR the catalog is gone. I assumed that was what was supposed to happen so I start importing all over again. But that is a different issue...
The problem has been happening since at least the beta of 3 came out and I saw other posts back then saying they had similar issues but I assume it was a beta thing... But since the full version came out and through each incremental change I haven't seen an improvement. If anything it has gotten a little worse with time.
I have to try to be careful to not be in a hurry and start clicking around in the catalog as it seems fragile until it has cataloged all the photos in the library. When starting you will see the numbers populate the folders very slowly and I try not to click on a folder that hasn't had the number of photos pop up yet. Also draging the slider down to see more of the cataloge can have the same affect and crash the system.
I wish I had more to go on.. I believe it may be a resources issue but as I went from 3-4 Gig I thought it would get better. I don't have big programs running but did have outlook and word running in the background along with firefox and chrome.
And yes it only happens on this HP desktop (it's 2+ yrs old) and may be showing it's age a bit. My laptop which has less resources doesn't have the issue.. I have them sharing the catalog. (not at the same time) just when I'm working in other places in the house.
Jeff

My MacBookPro is continuously buzzing, the backlights are not working although it should be on. Tried to cover the sensor, but it's not that. Also, it's telling me that I have no batteries and the charging is not working either.... Any help? PLEASE!!!!

My MacBookPro is continuously buzzing, the backlights are not working although it should be on. Tried to cover the sensor, but it's not that. Also, it's telling me that I have no batteries and the charging is not working either.... Any help? PLEASE!!!!

Intel-based Macs: Resetting the System Management Controller (SMC)

Project Plan icon not working

The little icon found on the left that allows you to access your project plan is not working for one of my project managers, who is the owner of that specific project. However in the Admin's view they are able to access it by clicking that button.
Any thoughts why?

Hi EPM Admin,
The issue occurs only for 1 PM? Is the icon working for this PM with another view? Can the PM try on another machine? When you say that it doesn't work, do you have any error message or just nothing happens? Have you tried refreshing IE deleting the cache
(press CTRL F5)?
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

I recently upgraded to IOS5 on a 3gs and now my phones bust. My music is really slow and on some songs despite deleating and reuploading, my phone crushes each time i try to play them. i cant scroll music and my wifi is not working either whats going on?

I recently upgraded to IOS5 on a 3gs and now my phones bust. My music is really slow and on some songs despite deleating and reuploading, my phone crushes each time i try to play them. i cant scroll music and my wifi is not working either whats going on?

Hi imobl,
Thanks for your response, I forgot to add that the five 3uk sims we have in use, I have tried all of them none of them are recongnised non of them have pin codes, I even purchased four more sims Tmobile (original carrier) Vodaphone, 3 and giffgaff.

Business Planning is not working in Portal BI iviews

it give me error of JCO . SLD is fine, and JCO is configured but it still does not work. help me please

Hi,
Please refer to this link : http://help.sap.com/saphelp_nw04s/helpdata/en/fa/c1194276e0de2ce10000000a1550b0/frameset.htm. This documentation provides all the information you need to configure and run business planning on Portal.
Just refer to the section Tasks -> Business Planning Scenario Variant. It refers to the JCo Connections and other configurations you would need to maintain.
Hope this helps.
Cheers,
Sunil
PS: Reward points for helpful answers.

Display/Change/Delete of planning object not working in BPS

Hi Guys
While displaying or changing object in planning workbench, system is taking too long to process the request and request doesn't completes even in hours. The following operations are not working
1. Delete Planning Area/Level.
2. Display/Change planning Level.
3. Display/Change Planning Layout.
4. When clicking on Variable Tab of infoarea.
5. When clicking on Set variable button.
In all of the above mentioned cases System displays a message "Generating Environment" and it runs for indefinite time.All this is ha0
We are on Suppport Pack 12 of BI NetWeaver(2004S)and we are using BPS for our planning application.
Thanks
Tripple k

Hi Dear
Thanks for info. i know that it will take some time to regenerate the BPS classes after making changes in cube but in my system its taking at least half an hour which i think is too much.....i don't think that its normal behaviour of system...
Thanks
Kamal

Macbook Pro suddenly turned off when fully charged and won't restart. Charger not working either coincidently

My 2 year old 13" MacbookPro suddenly turned off, presumably when the screen automatically dimmed (or went to sleep?) and now it won't turn back on. It was at 96% charge and now when I use the battery checker on the side, nothing shows up. No lights or anything. The charger doesn't seem to work either even after trying it on different outlets. This has never happened before but it has been harder to wake it from sleep in the last 6 months or so. I would have to push the On/Off button for a sec and the screen would turn back on. Also when I turn it on, the password screen is sometimes off-centered..weird.
I'm using Yosemite, the latest version..not sure what it is and can't check right now...I had to go use a PC to ask this question >_<

Try a SMC reset:
http://support.apple.com/en-us/HT201295
If no success, make an appointment at an Apple store genius bar for a FREE evaluation.
Ciao

Thought Firefox upgrade would fix problem of not being able to download YouTube videos. It did not. May I suggest that you use Explorer instead. Firefox live chat is not working either.

Firefox and YouTube do not work well together. USE EXPLORER INSTEAD to download videos.

Carolyn:
I just now did exactly as you recommended. Result? No change.
Even after trashing the files and restarting and everything else, the Activity Window and YouTube behave exactly as they did before.
(I had actually previously tried something very similar to your recommendation, and it didn't have any effect then either.)
In case it's helpful, here's an example of what one of the mystery components that load endlessly in the Activity Window is listed as:
http://s.youtube.com/s?rendering=software&lact=102489&decoding=&rt=112.382&et=11 0.829&tsphab=1&st=69.939&tspne=0&tspfdt=262&nsiabblmin=62945.000&nsidf=2&tabsb=1 &ad_flags=0&h=360&nsiabblmean=72646.865&md=1&docid=zPxFu7taftE&bc=15194849&csipt =watch5ad&ad_event=3&el=detailpage&hasstoryboard=1&vid=72A5TVVpDgRoXDV3HvMeKPjLx BFdU61DC&fmt=34&cr=US&sd=BD075E8E6HH1336502192683396&vtmp=1&nsiabblmax=79054.000 &hl=en_US&ns=yt&nsivbblmax=774478.000&referrer=None&sidx=0&hbd=7790924&w=480&hbt =2.751&cid=6&sendtmp=1&sst=0&cfps=25.974025974025974&screenw=1440&mt=0.6&vq=auto &playerw=640&playerh=390&slots=sst~0;sidx~0;at~2_3&scoville=1&at=2_3&volume=100& art=1.842&mos=0&plid=AAS_iqoqfi0mjNc0&fs=0&nsivbblc=208&nsivbblmin=561638.000&bd =931267&allowed=1_1,1_3,2_1,2_3&bt=7.441&fvid=bNz97ILtwqc&screenh=900&len=127.92 &vw=480&nsivbblmean=668895.024&nsiabblc=208&vh=360&fexp=912001,914050,913539,919 306,907217,901802,906507
And here's one of the 1.7MB components:
http://o-o.preferred.comcast-lax1.v11.lscache8.c.youtube.com/videoplayback?range =1781760-3563519&expire=1336524839&id=ccfc45bbbb5a7ed1&burst=40&cm2=0&sver=3&upn =I_VxE0Lmh4Y&keepalive=yes&ipbits=8&algorithm=throttle-factor&itag=34&sparams=al gorithm%2Cburst%2Ccp%2Cfactor%2Cid%2Cip%2Cipbits%2Citag%2Csource%2Cupn%2Cexpire& source=youtube&signature=6F9B5B2CA58ACBA6AFE02FB8A54F1F74EE2B0F16.8E421BC37C3019 E806C22CF3E8866847D033565C&factor=1.25&ip=71.0.0.0&cp=U0hSS1VNUl9IU0NOMl9NR1ZJOm lxNTVmbm1vcDlO&key=yt1&fexp=912001%2C914050%2C901802%2C906507%2C907217%2C919306% 2C913539

Can't tether on iphone 4 bluetooth seems not working either

I cannot tether anymore. Tried this morning, the hotspot option was still available, but not working with my ipad. Now the hotspot function is not even on my phone. Tried to turn off the phone, did my 6.0.1 update, and still nothing.

I have had the same issue with my phone. I noticed that it was using up the battery too quickly. After numerous attempts to fix the issue (turn off/on, make sure there are not background apps, etc), I decided to finally do a restore.
I have had the same issue on restoring the phone ("unknown error occurred (9)"). It appears to be an issue with the phone talking over the USB. Suggestions on Apple's site (can't find the link right now) are to try different cables, different USB ports, assure you have no other devices on the USB bus, and try another computer. I've tried all of this and haven't had any luck so far. I'm hoping that either AT&T or Apple will have a replacement phone at this point since this one seems to be bricked

Plan C not working either

Similar Messages

Maybe you are looking for