Plan cost of IW31 not updating when MRP4 of Material master is individual requirement
Hi,
When Individal/coll of MRP4 tab of Raw material is 1 Individual requirement, plan cost is not updating in Tcode IW31 Repair order. It is updating when MRP4 is 2 collective requirement.
Please let me know the possible reasons.
Thanks
Yongguo
The behavior you are seeing on your system is correct system behavior.
The system rolls costs/revenues up to the assigned wbs element
if an order or network activity is flagged for deletion so you
can archive orders/networks while the project is still 'alive' without
loosing information on costs/revenues.
The logic is that costs of deleted networks should not get lost but are
rolled up to the superior wbs-element.
SAP has the understanding that released activities are used immediately,
carry actual costs and, therefore, can not be deleted. To keep the
objects clearly arranged the reorganization run can be used to move
some objects (those with status DLFL) to the archive without losing
data (in the meaning of costs).
If you want to remove these costs of the WBS elements you have
to cancel the deletion flag of these networks, remove the planned costs
start network costing and save. You can then set the DLFL again and
the costs will not appear in the structure report.
Hope this helps.
Best regards
Martina
Similar Messages
-
Change pointers are not generated when creating a material master
Dear Experts,
Change pointers are not generated when creating a material master.
However, when a change is made to the already created material, the change pointers are created according the fields in BD52.
Am I missing any settings?
I need to create change pointers immediately when I create the material master in MM01.
Please suggest.
Regards,
Shettydid you follow the steps given in
http://help.sap.com/saphelp_nw73/helpdata/en/4a/6dcbe9c95261a3e10000000a421937/frameset.htm -
Delta update not working when i change material master data
Hi SAP Guru's
can any body help me in solving my issue.
My issue is i created a data source with a function module to create delta in change date field LAEDA.
.Full upload is working fine based on the selection screen but delta update is not working properly .
it is working as full load run for every first run of the day.
Please can any body help me in this.
What i did in ECC.
I copied the FM 'RSAX_BIW_GET_DATA_SIMPLE to Z function module.
Done a select on three tables and passed the data into e_t_data
In Rso2 i attached LAEDA filed after clicking generic delta field.
after completing the steps in ECC
Any help will be apperitiated .
Thanks in advanceDid you actually change the sold-to party though or just the payer? The sold-to party's price list type controls the price list type value copied into the order header. Even if the payer has a different value, it's not copied to the order header. You can see this behavior in FV45KFKD_VBKD_FUELLEN. If you switch sold-to's then you should get a pop-up that new pricing was carried out; you should also see your new price list type value in the order header and you can use the 'analysis' function at the item level to verify that the correct price was used.
-
Update of Price in Material Master when standard costing is released.
Hello SAP gurus,
When we created standard cost estimate, various cost estimate is created in various views Cost of good sold, cost of good manufactured and Inventory ( commercial ). Different view have different cost estimate.
But we I release costing , the material master is updated by cost estimate of Inventory ( commercial). The cost estimate from Cost of good manufactured should be update?
I am not able to solve the above issue , please help with customizing link
Regards,
Anand AgrawalHi Anand,
While you configure the Cost Componenet structure you define the attributes of cost Components in OKTZ.
When defining the cost components, you must specify whether the cost component plays a role in the creation of the different prices that are transferred into the material master record. You have the following options:
Standard price
Costs that are flagged as relevant for stock valuation form part of the standard price if the results of the standard cost estimate are marked and released. These costs also serve as a basis for the following:
The calculation of target costs in variance calculation
The valuation of scrap in variance calculation
The valuation of work in process for the confirmed yield for the operation (order-related production, process manufacturing) or at the reporting point (repetitive manufacturing)
Commercial price
Costs that are flagged as relevant for inventory valulation for the purposes of commercial law form part of the commercial price. This price is calculated in an inventory cost estimate and can be written to the material master record.
Tax price
Costs that are flagged as relevant for inventory valuation for the purposes of tax law form part of the tax price. This price is calculated in an inventory cost estimate and written to the material master record.
The above information will prove helpful.
Regards,
amol -
IPod will not update when plugged into computer?
Just recently my iPod with not update when I plug it into my computer. My iPod does not show up on my Mac or my iTunes. When I plug it in the screen shows the do not disconnect sign. I have tried to reset my iPod and checked for new updates, but they haven't worked. If anyone knows what to do that would be great.
ThanksYes. Since I installed the new system software (10.4.6) update Sunday night, I cannot update any of my iPods except the iPod video. The iPods also do not show up on my desktop. The battery charges but that's all that happens.
-
Mail on my Mac computer does not update when I update my mail on my iPhone and iPad. Can anyone help me with this? Is there a setting that I need to check?
All that you had to do was to sign into the old account in order to update those apps. What I mean is that you just needed to sign into that account in the store settings like I described and that should have worked. You didnt need to enter the credit card information again - you justed needed to use the old ID and password.
Anyway, I think the good news is that if everything else is OK with the new account, just download iBooks with the new ID - it's a free app so its not like you have to pay for it again. I'm not sure what the other App is that you are talking about - but if it is the Apple Store App - that is free as well.
Try this anyway, when you try to update iBooks, just use the old password if the old ID still pops up.
Did you try signing into the store settings with your new ID and see what happens with the updates then? -
RE: Cost centre is not updating in FAGLFLEXT table
Dear experts,
During posting we give PSG and cost centre but cost centre is not updating in GL total table FAGLFLEXT as its statistical, in order to be able to update CC in the GL total table what we should activate?
please advice.
Regards,
Chandu.Hi Chandu.
Sadly, this is the standard behavior of the system. In FAGLFLEXT only arrive real cost object, not statistical. This is explained in oss
964686 - Transfer of statistical postings in CO to FI
If you really nead the Cost Center, you can enhace table FAGL and and create Z field for statistical cost center. This is a common solution.
Arturo. -
Why the PO action history is not updating when i perform the vacation rules
Hi,
Can any one explain why the action history is not updating when performed the vacation rules using the below example
Example: A >B>C>D are in the approval hierarchy here I have defined the vacation rules by login to the user C here I selected the item type as “All” and delegated to D.
Now the buyer “A” has sent the document for approval. The user “B” can successfully reserve funds and approved the document. Now the document is automatically delegated to D. Here D can open the document from open notifications and approved the document. Now when I checked the Action history here I cannot find the performed name D who has actually approved the document.
Note:we are using the 11.5.10.2 version.
The Action History in the following manner
Seq Action Performed By
================================
4 Approve C
3 Forward B
2 Reserved B
1 Forward A
0 Submit A
From the above action history why the user D name is not showing. Can any one let me know ASAP?
Regards,
Keivn.
Edited by: user10960960 on May 5, 2009 3:36 AMWhen you set up the vacation rule, if you simply delegate the ownership to D, then C retains the ownership and the approval occurs with C's limits. And hence D is treated as the approver.
If you transfer the ownership, then C is out of the picture. The notification goes to D and when he/she approves, D's limits kick in and he will be seen as approver.
Hope this helps,
Sandeep Gandhi -
ITunes play count does not update when iPod is connected
iTunes keeps track of how many times i play the song on my computer but does not update when I connect my iPod. Is there a way to fix this??
thanks!!I just checked and it does update for me. I'm still waiting to see if it updates from the AppleTV though.
-
Content does not update when published
My content is not updating when I publish updates to my app. Side loading shows the updates, but an updated published folio doesn't. On the third try, I got a blank light grey screen. I finally had to unpublish and republish the content, which is obviously not an ideal situation.
Are there any known bugs or problems at the moment that could be causing this issue? The DPS Status page doesn't have any info.
Thanks
-ScottI'm not aware of a way to get out of this state cleanly. Uninstalling and reinstalling the app fixes the problem (unless your unpublish/republish again), but it's difficult to tell your customers to uninstall/reinstall. Another option is to unpublish and then publish the affected folios as different folios, but then some of your users will end up with two versions of a similar folio until they archive the older version.
Let me ask around to make sure that I'm correct about the cause and to see if there's a cleaner workaround. -
My iPod touch 5th generation battery indicator does not update when being charged (Updated to iOS 8)
Note that the iPod touch 5th generation was updated to iOS 8. When I connect my charger to my iPod touch, for the first time, the battery indicator does not update when connected to a power source. Instead of being charged, it says that the battery is being depleted. Please fix this issue. Thank you!
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My mail program does not update when I delete emails in my other email programs (i.e. it still shows messages in my mail inbox when I've deleted them). I think this started with Maverick? Any solutions?
one is gmail, one is a university email and they are both IMAP accounts (not that I know what that means)....
-
I had purchase one year protection plan but it is not updated till today how would I updated iPhone warranty my self
Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
maybe this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar -
I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?
To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step. -
Text not updated when changing the ResourceBundle
this is an abstraction of what i have on my code:
controller
public class controller extends VBox{
@FXML protected Label ex2;
public CtrlMainMenu() throws Exception{
FXMLLoader fxmlLoader = new FXMLLoader(getClass().getResource("/view/View.fxml"));
fxmlLoader.setController(this);
fxmlLoader.setRoot(this);
fxmlLoader.setResources(CtrlLanguage.resource);
fxmlLoader.load();
@Override public void initialize(URL arg0, ResourceBundle arg1) {
ex2.setText(arg1.getString("ex2"));
}View
<fx:root type="VBox" xmlns:fx="http://javafx.com/fxml">
<children>
<Label text="%ex1"/>
<Label fx:id="ex2"/>
<children>
</fx:root>Language controller
public class CtrlLanguage{
private static String PATH =
new File(
CtrlImageLoader.class.getProtectionDomain().getCodeSource().getLocation().getPath()
).getParentFile().getPath() + "/language/";
public static ResourceBundle resource;
public static void setLanguage(String file) throws Exception{
try {
if(new File(PATH + file).exists())
resource = new PropertyResourceBundle(new FileInputStream(PATH + file));
else
resource = new PropertyResourceBundle(CtrlLanguage.class.getResourceAsStream("/language/"+file));
} catch (Exception e) {
resource = new PropertyResourceBundle(CtrlLanguage.class.getResourceAsStream("/language/EN"));
public static String get(String key){
try {
return resource.getString(key);
} catch (Exception e) {
return key;
}problem comes when I try to change the language without changing the current root
the elements of the view are not updated when the bundle is changed (CtrlLanguage.setLanguage("file");) until the root is changed/loaded again
is there any way so i can make the content change without having to reload again the root?A method which returns an instance of the following class:
* A localizable read only property for internationalization of string properties.
* @author Christian Schudt
public final class LocalizableStringProperty extends ReadOnlyStringProperty {
private String resourceKey;
private StringProperty text;
private String baseName;
private ClassLoader classLoader;
// Keep the listener as hard reference in the class, so that it won't get GCed, until this class has no references any more.
private ChangeListener<Locale> changeListener;
public LocalizableStringProperty(LocaleManager localeManager, String baseName, String resourceKey) {
this(localeManager, baseName, resourceKey, null);
public LocalizableStringProperty(LocaleManager localeManager, String baseName, String resourceKey, ClassLoader classLoader) {
changeListener = new ChangeListener<Locale>() {
@Override
public void changed(ObservableValue<? extends Locale> observableValue, Locale locale, Locale locale1) {
localeChanged(locale1);
localeManager.localeProperty().addListener(new WeakChangeListener<Locale>(changeListener));
this.baseName = baseName;
this.classLoader = classLoader;
this.resourceKey = resourceKey;
text = new SimpleStringProperty();
localeChanged(localeManager.getLocale());
private void localeChanged(Locale locale) {
ResourceBundle resourceBundle;
Locale.setDefault(locale);
if (classLoader == null) {
resourceBundle = ResourceBundle.getBundle(baseName, locale);
} else {
resourceBundle = ResourceBundle.getBundle(baseName, locale, classLoader);
text.set(resourceBundle.getString(resourceKey));
@Override
public String get() {
return text.get();
@Override
public Object getBean() {
return text.getBean();
@Override
public String getName() {
return text.getName();
@Override
public void addListener(ChangeListener<? super String> changeListener) {
text.addListener(changeListener);
@Override
public void removeListener(ChangeListener<? super String> changeListener) {
text.removeListener(changeListener);
@Override
public void addListener(InvalidationListener invalidationListener) {
text.addListener(invalidationListener);
@Override
public void removeListener(InvalidationListener invalidationListener) {
text.removeListener(invalidationListener);
}
Maybe you are looking for
-
Add all files in the path while creating folio file in Folio builder
Hello everyone. I am using InDesign CS 5 and creating folio for iPad 2. My Folio builder was working fine till last week, but suddenly i see a change the way it behaves. When I update the files in Folio builder, it adds all the files in the path (not
-
Channel scale effect over saturation
Hello, I have a .vi to acquire 8 channels, with a 6062E card and a BNC-2115 board. For each channel, I have created a scale, so that I get physical units. Up to today, I used to read Volts, and then multiply the signal by the sensitivity and add an o
-
hii all, i have uploaded asset through AS91 transfer date was 31.03.2007 . entry not posted to g/l. Now i want to reverse the asset and delete. but whenever i am reversing with T. code AB08 . its showing error No asset line items exist for year 200
-
Question on owa_util.print_cgi_env and HTTP_HOST
Hello, The HTTP_HOST is showing as localhost:7778 when I query owa_util.print_cgi_env; in SQL Workshop. This is APEX 2.2.1 and I just registered the APEX application as a partner application for SSO. I believe it should be the real host name right? H
-
I am unable to access my gmail on my iPad air. I can access my yahoo mail . I can also access both gmail and yahoo on my Kindle fire. What is the oroblem with gmail and iPad?