Plan cost on sales orders

Good morning,
does anyboby know if and how is possible planning costs on sales orders?
Currently, sales orders are set as account assignment; actual costs are accounted without problems on sales orders and report KKBC_KUN properly shows costs. But no plan data.
Furthermore, we execute cost estimate on sales orders through CK51N.
Please tell me something more if you know.
Thanks,
Regards
Enrico

Dear Enrico,
check the documentation at
http://help.sap.com/saphelp_erp60_sp/helpdata/en/90/ba81d2446711d189420000e829fbbd/frameset.htm
br, Guido

Similar Messages

WBS planned cost in Sales order cost estimate

HI Experts,
Can you please help me in below:
Will it be possible to include WBS planned cost in Sales order cost estimate.
ETO Scenario
Creating Project and booking planned cost
Creating Sales order and assigned the WBS at line item level
WHen i do the sales order cost estimate it calculating cost from Sales order BOM includeing Chars value for KMAT.
I want to know if there is any way to include the WBS planned cost also in the sale order cost estimate.
Can anyonce please provide inputs.
Thanks,
Sudha

Hi Sudha
Are you saying the WBS Planned cost is in addition to the Sales Order cost estimate? Well, as far as I know, there is no such possibility
you can use Unit Costing feature in Req Class instead of Quantity Structure Based Costing... Then you can enter whatever items you want
br, Ajay M

WBS Planned Cost on Sales order

Hi Ajay and Experts,
We have created WBS element and assiged on Sales order line item in Account assigt tab (Accont *** cat M and Valuation M).
Is there any way to get the corresponding Planned cost of WBS on Sales order line item when WBS is assigned.
Thanks,
Sudha

Hi Manoj,
We are in MTO Scenario but Production order we will settle to Mat itself
WBS assigning on sales order line item.
WBS we are using to capture any addtion cost towards paint etc.,
While calculating the Margin in Sales order we could able to get the Material cost through VPRS but towards the WBS planned cost is missing, so that the Margin is not coreect.
For this purpose we are planning to bring the WBS planned to to sales order to get the correct Margin.
Thanks,
sudha

Sales order - show total plan costs (from production order) on sales order

Hi all,
I have the following question/scenario:
We create prodction order to collect cost (hours) for a service. There exists also a material master for this service.
The confirmed hours are posted on the production order and then setteld to the respective sales order (settlement rule SDI).
What to I have to maintain/customize to show the total plan cost (for the service) on gthe sales order?
If I check the sales order via VA03 --> environment --> cost report , I can see the planned sales revenue but no planned costs?
(the actual value flows work so far, postings via settlement or billing document).
I hope the topic is understandable. Any ideas?
Thanks in advance.
Edited by: Butch66 on Sep 27, 2010 7:07 PM
Edited by: Butch66 on Sep 27, 2010 7:08 PM

Hi
Planned costs from prod order can not show on sale order.. Both are 2 separate entities in their own respects
Unless you calculate sales order cost estimate on your sales order, you cant see planned costs on sale order...
To calculate sale order cost estimate, make settings in your requirement class...
1. Go to procurement tab of sale order
2. See whats the requirement type
3. Go to IMG > Controlling > Prod cost Contr > Cost Obj Contr > Prod Cost by Sales Order > Control of Requirements
4. Here you can see mapping of req type to req class....
5. If you want to have sales order costing and have sales order as CO object inorder to have sales order wise profitability, you should have following settings in Req class...
>Acct Assignment Category should be E
>Costing: Either Blank or X
>Costing Id and Costing Method: As per your requirement
Regards
Ajay M

Product costing by sales order configuration steps

hi
plz send me product costing by sales order configuration steps.
sir, i know manufacturing order configuration step but i do not sales order configuration.
in the sales order also is same as manufacturing order like first we have to make planning cost , the planning cost should be updated to material master and next configure the actual cost.
for first step- costing variant -okkn
next -costing variant -opl1
for sales order also same we need to update planning price first- what is costing variant
for actual cost - what is costing variant
plz tell me detail
regards,
sowmya
Moderator: Please, read forum rules before posting

Hi Sashikanth,
Please send me the Configuration document for make to sales order.We are at Blue print stage need some docment for make to sales order.Plese send me the document it will will be very help full for me.
My id is [email protected]
Thanks in advance
Regards,
Nagaraju
Edited by: nagaraju sami on Mar 9, 2008 11:58 AM

Product costing valuated sales order stock

Hi all,
We are in complex mfg & currently re-vamping all the ERP SAP instances ( totalling 13 company codes into one single)
All 13 units( who use NON Valuated scenarios for cost object controlling) wil use valuated sales orders & projects. The old 13 companies will be trated as profit centers with transfer pricing functionality ( Multiple valuations)
My issue is to get a product cost for sales order in <b>profit center view</b> ( plan cost) exactly same as to the marked standard cost itemisation of the FERT material.
We mark & release the std cost in Jan & the client wants to have the same itemisation of the cost ( with same values) even if they create a sales order in 2nd or 3rd or last quarter. ( As you might be knowing that the sales order wil always cal;culate the values as per the current qty structure date. In Std SAP date control, there is nothing which allows us to cost exactly the same cost estimate as marked & released in JAn)
Could somebody pls give pointers as how to get this sales order plan cost itemisation exactly equal to prevously marked & released itemisation ?
We use the Std costing variant ( Costing Type = Profit center valuation) with Std date control.
Thanks in advance to all of you,
Warm Regards
Dhiraj

Hi,
If the sales order stock is valuated, you have immediate access to its value in Financial Accounting. The assigned accounts are debited and credited as a result of the valuated goods movements. From the viewpoint of MRP, the sales order stock is available for the sales order only.
If the sales order stock is not valuated, it is managed via a cost collector. The system does not carry out invoice verification postings for goods movements, and you cannot obtain an overview of how the stock is valuated until the end of the settlement period in Controlling.
Valuated sales order stocks have the following advantages:
The full costs are available at each manufacturing level.
All goods movements are immediately reflected in Financial Accounting
Assign points if helpful
Regards,
Saurabh

ADDDITIVE COST FOR PRODUCT COST BY SALES ORDER SCENARIO.

Dear friends,
We are using costing for sales order & we have maintained the costing variant under the path IMG> Controlling> Product Cost Controlling> cost object controlling> Product cost by sales order >premliminary costing & order based costing>product costing for sales order costing>Costing variant for Product costing >Check costing variant for product costing.
Under this we have maintained the Costing variant, Now we need to have Additive cost. But didnt found the tab in the costing variant where as when we check in T.code OKKN which is a part of Product cost planning we can find the Additive cost tab.
How to run addtive costing run for Product cost by sales order scenario & please guide me with one example.
Or else is there any configuration where we can assign standard costing variant PPC1 instead of Costing variant SOC1 ( which is a costing variant of Product cost by sales order.
Please guide me
regards,
Sandeep

Hi Sandeep,
You may please try using Unit Costing for Sale Order.
It is over an above the sale order costing you have done. So in case you want to post any additional known cost, you may do the unit costing for the sale order after the sale order costing.
Trust this helps

MTO-Product cost by Sales Order

Hi Guys,
My client is manufacturing Energy Meters, they want Sales order based Production Planning and costing etc.,
in MTO scenario, Product cost by Sales Order
1. Sales Order will be created
2. BOM is created
3. some of raw material in the BOM list are available in the stores
My question is that
When I run MRP, the system will create planned order and PR, the system will check the availablie qty which are in the stores or not for the planned order.
Correct me if am wrong,
if the system is not checking the available qty, then there is no Planned Order, everything will be new PR for the whole sales order Qty.
Expecting your valuable reply
Thanks for your help in advance.
Regards
Elan

Dear ,
When I run MRP, the system will create planned order and PR, the system will check the availablie qty which are in the stores or not for the planned order
Answer is Yes .In Sales Order Based Production Order -MTO , you will be having pre-determined BOM and Routing , before creation of FG Sales Order .
Based on Planning Strategy 20 : If you are using 20 planning startegy , then you will frist roll the cost in Sales Order Level by going to VA02-High Lisght Line item -Extras-Cost -based on BOM and Routing , Sales order will be costed and flagged with green .Then Sales Order will be credit relased in VKM3 for MRP run in MD02.
Now , in MD02 , you need to select NETCH , 2,1,1,3,2 while executing MRP on FG item .Here , MRP system will explode the BOM till the lowest level and does net requirement calcuation for BOM Component (as depedent to FG) .If the stock alwardy available , then it will show up as Stcok in Order Report (MD4C/MD04-Planned Order -Order Report ) under Reseravtion number or else it will generate PR for componenet where as planned Order for FG.
Creation of PR or Plnned Order depends on Procurment Type -E/F as well as selection of indicator Create PR in MD02.Basically , for MTO Sales Order item , it will FG with procurement type E and compoenet will be F if there there is no farther sub-assblmy .So it should generate Planned Order for FG and PR for shortage qty of component .
Hope this is clear
Regards
JH

How to keep the same cost in Sales order and return order?

Hi experts,
When I create a sales order with item cost 100 USD.
Then the cost of item changed and down to 90 USD.
When I do goods return refer to the sales order. How can I keep the same cost (VPRS) 100 USD but not 90 USD?
I made a test the cost in sales order is 100 USD but 90 USD in return sales order.
I want the cost in return sales order is 100 USD.
How can I do?
Thanks,
Lance

Hi,
Let me tell u my understanding of your requirement, after the sales the cost of the item is changed to some thing low than it was in sales order or invoice, in this scenario you need to transfer the cost of the material as it is in the sale order or invoice (which you are taking as reference to create a Return Order), am i right?
If so, you can proceed like this.
In the copy controls of Billing to Sales orders ( F2 to RE) we have the pricing type N assigned to it ( Transfer pricing components unchanged, New Cost) here the system is reading the change of the cost again from the material master. if you don' t want it to read the material master data again we can have a change try with pricing type 'D' (Copy Pricing elements unchanged), and try now.
let me know the result.
hope this will solve your problem.

Update the cost in sale order

dear sir
i check with abaper ,he says the value is updated from sale order
they get the consumption of sales using customized transaction
actual cost is zero
user create the material master withot pricing
we ask to update the material master and they do the costing run
in material master standard costing estimate found
after they run the consumption report ,once again actual cost is zero
i chech\ked in costing status using CK11N ,std cost estimate found
is it possible to update the cost in sales order
(redetermine or recalculate the pricng in sale order)
so that my consumpotion report will update
thanks

Hi,
Check the following link
http://help.sap.com/saphelp_46c/helpdata/en/90/ba6da4446711d189420000e829fbbd/content.htm
Regards,
Saju.S

How to enable Billing plan tab in sales order (lean) with NWBC

Dear All,
The Billing plan tab in sales order (lean) is not availabe with NWBC. How to enable this tab?
Is there is any documentation to do the modifications of NWBC's webdynpro screens?
for example, there is a standard webdynpro screen in NWBC from SAP best practices to create sales order (lean). The lean sale order screen having restricted elements and tabs when compare with standard SAP GUI (t code va01).
So I want to include the few missing tabs for data entry.
any documentation or solution?
thanks in advance,
Suresh Yerra.

Dear All,
Is there is any documentation to do the modifications of NWBC's webdynpro screens?
for example, there is a standard webdynpro screen in NWBC from SAP best practices to create sales order (lean). The lean sale order screen having restricted elements and tabs when compare with standard SAP GUI (t code va01).
So I want to include the few missing tabs for data entry.
any documentation or solution?
Thanks,
Suresh Yerra.

Sales order costing - tracking of actual costs at sales order item level

Hi
We are going with sales order costing for services
Service material is non-valuated hence the scenario is non-valuated sales order stock
PP module is not implemented.
I am having following questions
1. How to track the actual costs at sales order item level? Is Internal order/CO production order is required to be created for the same?
2. Can I do activity confirmations directly from cost center to sales order item.
3. Can Raw material is issued directly against sales order item.
4. Is Sales order is a real or statistical account assignment object?

dear friend,
please look here:
http://help.sap.com/saphelp_47x200/helpdata/EN/42/d7248ab27111d19e9a080009b0db33/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/EN/90/ba6cfb446711d189420000e829fbbd/frameset.htm
reagrds,

Cost in Sales Order and Billing not match

Dear all,
I am facing a problem that the cost in Sales Order and Billing (order-related billing) not match.
The error seems related to sales order is getting moving price (MBEW-VERPR) as cost but billing is calculated by issued amount / qty.
Here's the detail (refer to the screen captures).
Sales qty = 1330 PC.
Local currency = HKD, sales doc currency = RMB, exchange rate = 1.26215.
Condition type ZCSR, condition category = G (Internal price).
When creating sales order ,
Cost is take from MBEW-VERPR => 1.86 HKD
Cost converted to doc currency => 1.473 RMB => 1.47 RMB
Total amount = 1,330 x 1.47 = 1,955.10 RMB
When creating billing from the delivery note,
Cost seems taking from total value divided by total stock in the article doc.
Cost = 2,477.82 / 1,330 = 1.863022556390 HKD => 1.476 RMB => 1.48 RMB.
Total amount = 1330 x [(2,477.82 / 1,330) / 1.26215] = 1,963.17 RMB
My goal is to align the same cost and amount in sales order and billing.
Please help.
Thank you very much.

Dear joan,
Thank you very much for your advise.
I implemented example 1 as in note 24832, trying to disable price re-determination in billing.
However it doesn't work.
Added code in example 1:
Copy control Delivery type LF to invoice F2, pricing type changed to X:
Still ZCSR re-determined but not copying from sales order (1.47 RMB):

Product cost by sales order with Valuated Sales order stock

Hi Gurus,
I am working on Poduct cost by Sales Order with Valuated stock. but i have doubt ragarding to Cost estimation.
1.In sales order scenario also Standard Cost estiamtion (CK11n and CK24) and Marking, Releasing is Mandatory? if not how can we estimate the cost?
2. If we are estimating the cost by using Standard Cost estimate, when can we estimate the cost?
can anybody please give me the steps which we are following in Poduct cost by Sales Order with Valuated stock from starting to end Settlement
Thanks&Regards
Prasad

Hi,
there are 3 types of scenarios in MTO.
In Two scenarios Sale Order would be cost object - (Non-Valuated Sale orders stock and Valuated Sale Order stock with Sale order being Cost Object)
In third scenario (Valuated Sale Order Stock without Sale Order controlling), Only Production Order is the Cost Object.
In all the cases wherever the Sale Order is the cost object, Sale Order is the final Receiver. Only the difference is that in valuated sale order stock, stock entries would be passed to FI and in non-valuated sale order, no goods movement for FG will be there.
Please let me know if you need further details in this regard
Surya

BAPI KPF6 POST PLAN COST FOR INTERNAL ORDER AND COST ELEMENT

Hi all gurus,
I would like to use in a custom report a BAPI/Function Module that help me to simulate KPF6 in order to post planning costs for internal order and cost element (layout 1-401).
So the input should be:
1) Version
2) period from
3) periodo to
4) year
5) internal order n.
6) cost element n.
7) value
I found a lot of BAPI but don't know the correct one and how to use it (example how to fill the input value).
Can anyone help me on that?
Kind Regards

In additio to the previous I found the BAPI_COSTACTPLN_POSTPRIMCOST but don't know if it's the correct one and how to use it (some example fitting the my case will be very appreciated).
If the quoted BAPI is correct.
I tested it filling all fields as following:
HEADERINFO:
CO_AREA=FFCA
FISC_YEAR=2008
PERIOD_FROM=001
PERIOD_TO=012
DOC_HDR_TX='blank'
INDEXSTRUCTURE:
OBJECT_INDEX=000001
VALUE_INDEX=000004 (hope this point at Interna Order)
ATTRIB_INDEX=000000
COOBJECT:
OBJECT_INDEX=000001
ORDERID=ZO53-08IMZ
TOTVALUE:
VALUE_INDEX=000004
COST_ELEM=3224048
FIX_VALUE= 200,0000
DIST_KEY_FIX_VAL=2
The Return table is set to 0. Nothing happens.....I suspect something related to indexstructure or index is wrong..
Could anyone help me on that?
Kind Regards

Plan cost on sales orders

Similar Messages

Maybe you are looking for