Plan costs calculation during results analysis of sales order

Hi Experts,
I am in process of implementing sales order costing. I am facing a problem during result analysis with plan costs data.
We have a sales order for which production order is generated. Cost object is sales order.
Say, sales order cost estimate which is the plan costs --> is $ 1000 (which includes prod order COGM of $ 600) (So remaining sales and admin costs are $ 400)
Plan cost of production order is $ 550 (as per production order cost analysis report)
While calculating the result analysis for sales order, system is calculating the plan costs data as $ 1000 + $ 550 = $ 1550
As a result, I feel plan costs data during result analysis is over calculated.
I feel either plan costs should be $ 1000 (as it already includes COGM part)
or
$ 950 which is (plan cost of production order $ 550 + sales and admin costs of $ 400)
Could some one explain me why result analysis shows plan costs data as $ 1500 and if I need to rectify how can I do so.
Thanks,
GAN

Any suggestions please.
Edited by: DSK on Feb 9, 2012 6:16 AM
Edited by: DSK on Feb 13, 2012 4:39 AM

Similar Messages

Results analysis for sales orders- actual costs/ revenues - (kka3-kkak)

Hi, i have a problem when I execute the individual results analysis for sales orders (kka3) I can see actual revenues and actual costs, however when I execute the collective processing (kkak) for the results analysis I don´t see these (actual revenues and costs). Is it normal? How can I see these in the collective processing?

Could be one of these possibilities:
1) Controlling Area set is wrong
2) You're input parameters are insufficient to get that sales order. Check Order Type etc you input in the main screen
3) The master data is wrong which is not allowing the link to the Sales Order. You would have to check each field thoroughly.
You will have to probably do a lot of checks before you resolve this. This isn't normal btw....you should see all Sales Orders
Assign Points if useful....

Results Analysis in sales order (KKA3)

Hi experts : i have a sales order with results analysis key 00004 , but in transaction KKA3 the value of cost plannig is the same of real cost. The COSP table from where obtain cost planning value ?.
Could you send me more information about results analysis for sales order .
Thank's for your cooperation
Veronica Barrientos A.
Construmart S.A.

Hi Siva:
I checked my configs ,it's right . I think if my strategy is MTS (make to stock ). maybe the reason is that .But now my strategy is MTO(make to order).maybe I miss other configs.

Results Analysis for Sales Orders

Hi
When i am calculting Results Analysis for Sales Orders as a part of Month End Closing Activities there are some errors for few orders...
Msg Type: E
AppAr: KJ
MsgNo: 216
Message Text: Planned Cost for Valuation are 0. Please Check the Object.
Can any one tell me what might be the error..
Thanks in Advance..
Sivaram

Hi,
The error is offen caused by one or possible more than one of following statements:
- the delivery block of the order is set
- the billing block is set
- the schedule line ( confirmed quantity ) is missing
- the position has been cancelled
- price condition is missing
In case no one of the mentioned options wouldn''t help, set the position status to technically completed, if the position is processed as well ( delivery, invoice, etc. ).
We often face this kind of issue
Good luck
Marian

Results Analysis on Sales Orders

Hi Fellows,
When i am running the results analysis for Sales orders using KKAK transaction , I do not wish to see the WIP items with 0 Values.So i selected the option " Hide Orders with 0 values in Results List ".
However I am still getting the WIP items with 0 Value.
I saw the help for this and it says
" Note: In some cases individual objects may still appear in the list when both the column "Reserves for unrealized costs" (reserve for unrealized costs + reserve for complaints/commissions) and the column "Reserves for imminent loss" are a sum of multiple value fields and these value fields are checked individually for zero value ".
From the above, I came to the conclusion that the 0 value items may still come even if we check the box.
However from the above note, can anyone tell me where i can check the " Reserves for Unrealized Costs " and " Reserves for Imminent Loss " and also how can i know what are the value fields which are adding up to these columns.
Also it says the Value fields are individually checked for zero value.
Where can i see the Value fields associated with this Results Analysis and where can i see if the Value fields are assigned a value of zero.
Please let me know if you have any thoughts on this..
Thanks in advance..
Srik

Hi,
Check whether Note 501915 - Creation, cancellation, and usage of reserves would help.
Regards,
P.S: Please post this question in FI/CO forum so that you can get answers quickly.

Results Analysis on sales order

Hi Experts,
After results analysis run, I see several column , could some one explain what mean for them ?
COS
REB
RANI
Best Regards
Shubin

Hi Shubin,
RANI-->Revenue Affecting Net Income(Calculated Revenue)
COS-->Cost Of Sales
REB-->Revenue Excess of Billings
Thanks,
Rau

Cost Analysis by Sale Order

Hello,
I'm seeking to enable in BI a Cost Analysis Scenario with repect to the Sales Orders. That is, something similar to the analysis you can easily perform in the R/3 area Accounting -> Controlling -> Product Cost Controlling -> Product Cost by Sales Order.
For instance in standard report KKBC_KUN, you can choose a sales order number and get all the cost elements related to that sales order, with the corresponding costs.
I have examined the following objects provided by the BW's Business Content:
- InfoCube 0PC_C01: it contains only the costs related to production orders, and not the costs associated with sales orders.
- InfoSource 0CO_OM_CCA_9: it seems interesting, in fact it delivers some header and line item data of the Controlling Object Document. Unfortunately it doesn't deliver the crucial characteristics Controlling Object and Controlling Object Type, which I definitly need for enabling my analysis scenario!!
(By the way, are these 2 characteristics delivered by the BC? There exists a 0COSTOBJ characteristic, but it's not used by any object in the flow afterwards. Moreover, I can't find a standard DataSource in R/3 which I can use to load either its attributes or its texts, and see what data enter it..)
Business Content for Product Cost by Sales Order), but none could help me.
It seems really weird that it's not possible to carry out a Cost Analysis by Sales Order in BW, so if anyone has some suggestion it'll be very appreciated indeed.
Thanks & Regards, Davide

I eventually found the following SAP Note. No BCT for this analysis scenario....
Note 584791 - BW-BCT-CO: Costs not extracted on sales orders
Symptom
In R/3, costs are posted directly to sales orders. The costs have to be analyzed in the BW system. In the standard system, however, this data is not extracted into the BW system.
Other terms
0CO_OM_OPA_1; 0CO_OM_OPA_6
Solution
1. There are currently no DataSources for costs on sales orders in the standard BW Business Content. Unfortunately, there are currently no resources scheduled for a new development in this area either.
2. Therefore, the DataSources and the Business Content must be created in the customer project within the framework of consulting as a customer solution concerning the generic extraction options of the BW Service APIs or function modules you have programmed yourself for extracting data.
3. Technical background information about costs on sales orders:
The transaction data is available in the following R/3 tables
COSS and COSP - Totals records or COEP - Line items.
This concerns records for the VB* object numbers.
The master data of the sales orders is contained in the VBAK and VBAP tables.
The 0CO_OM_OPA_1 and 0CO_OM_OPA_6 DataSources only extract costs for orders with master data in the AUFK table. These types of requests always have OR* object numbers. Therefore, these DataSources cannot be used for sales orders.
However, you may be able to assign requests from the AUFK table (for example, maintenance orders or production orders) to a sales order through the AUFK-KDAUF table field.

Actual & planned costs calculated while creating Plant Maintenance Order

Hi All,
I would like to know how the actual & planned costs calculated while creating Plant Maintenance Order (PM Order)
Thanks,
Ajay

You need to create an activity rate for 2014 for cost centre 51260201 and activity type NAHG20.
This can be done via transaction KP26, but is usually performed by your Finance team.
PeteA

How to allocate cost variances during goods issue in sales process?

Hi all,
In China GAAP, cost variances ( variance between standard cost and actual cost) should be capitalized to balance sheet at month-end.
Q1: Could I settle the cost variance to a B/S account instead of P/L account? What's SAP or your recommendation?
Q2: if we settle the cost variances to a B/S account, How could we allocate the production cost when post goods issue for sales order? i.e
Dr: COGS
Cr: cost of finished goods
Cr: production cost (B/S account, cost variances by proration of sold)
Please advice.Thanks in advance
Regards,
Alex LIU
Message was edited by:
Shuping Liu

Hi,
All variances between Standard & Actual cost should be settled to a P/L A/c as these are similar to Purchase Price variances on Raw Material purchases.
If you are valuing your Finished Goods @ Standard cost, then the difference between the Standard & the Actual cost should be debited or credited to a Price or Cost difference P/L A/c either at the time of doing the GR of the Production or at the time of posting the Goods Issue for Sales Order.
The balance in the Cost difference accounts needs to be finally posted to profitability segments in COPA.
Regards,
Assign points if useful.

Analysis of Sales order

To analyse the sale order we are using the TCode KKBC_KUN. I observed there are three columns in that report plan costs, actual costs and variance.
From where thse plan costs are picking by the system in this report. Actually my problem is there is commission on sales.. it is only visible in the actual costs column only... it is not visible in plan column costs. ...
Can any one help me in this issue... where i can check plan costs???
Thanks
Radha

Hiya,
If you are looking for tables, I believe the cost is picked up from table COSP.
However, you can perform a Sales Order Costing by going into the Sales Order and then Extras --> Costing. You need to setup the appropriate Costing Variants for this.
Not sure if this helps, so write back if you need more info.
Cheers.

Result Analysis for Refurbishment order

Hi Experts,
Could you please explain, can we calculate result analysis for refurbishment orders, I have created the RA key wip cost element ,selected internal and service orders w/o revenue in OKG9 and other WIP setting, I have assigned this TA key to order type in OIOF, I have created one refurb order, released and confirmed the order, now I have to do month end activity like RA calculation in KKA1 and than settlement.
When i am trying to execute KKA1 I am getting this message " Results analysis data was not changed
Message no. KJ240"
Could you please advise me how I need to fix this issue.
Appreciate if you can explain the month end process for refurbishment order in detail.
Regards,

Hi,
The default settlement rule for refurbishment ordrers is FUL rule to material. This type of rules defines the business scenario where the actual costs are settled only after the order is delivered or technically completed. In such cases the most used solution to monitor costs incurred on the order is to assign a results analysis key to the order and compute the so-called work in process (WIP). WIP (if computed) is equal to the actual costs on the order and it is posted to a WIP account when settling the order before DLV or TECO. When the order is delivered or technically completed, WIP calculation reverse WIP in CO
and the consequent settlement post this WIP cancellation to FI. Simulateously, the actual balance of the order is settled to material.
Check your customizing in OKG9 for the RA version ; have you set flag 'transfer to FI' ?
regards
Waman

Projects KKA2_ Results Analysis (Int. Orders/Projects)

Hi,
I have put the results analysis key under the control tab of a WBS element. When doint the KKA2 I am receiving the follwoing message.
I want to post WIP and have done all account settings. could anybody explain the process for this periodic processing of projects how to identify WIP.
I have posted via KB15 costs on this project and now I would expect the a WIP would be identified at this amount???
Thanks Ulrike
No entered status set. No results analysis will be performed
Message no. KJ210
Diagnosis
The valuation of the order or project in results analysis depends on the
    status of the object.
In this case, the object does not have an active status entered in the
    valuation methods in Customizing for WIP calculation and results
    analysis. Consequently, WIP calculation and results analysis cannot find
    a method with which the object can be processed.
Procedure
Decide whether the object should be processed in its current state
    (indicated by its active status in status management) by WIP calculation
    and results analysis.

RA is specific to the period you run for... this is standard behaviour.
Regards

Account determination analysis in sales order

Hi there,
in a sales order processing (VA02/VA03) I'd like to know which accounts will be determined prior to invoincing it.
I find the "account determination analysis" tool through the menù path: "Environment" -> "Analysis" -> "Account Determination" (FCODE = 'KTPR'), but it shows an empty screen
The same tool shows the desired data during an invoice processing (VF02/VF03).
How can do to see the account determination analysis in sales order processing, and not in invoice processing ?
This tool shows an empty screen even if the order is invoiced, or not.
So I'm asking: which is the meaning of this tool inside sales order processing ?
Hope I've explained correctly my problem.
Thanks in advance.
Andrea

Hi Nagaraj,
the sales order amount is > 0, but the account determination analysis tool still show me an empty screen
It seems this tool runs only into invoice processing.
I try to follow the ABAP debugger and at a certain point it uses the "account determination procedure" (KOFI00), that in the sales order is missing ... maybe this is the problem ...
Best regards
Andrea

Cost Center and Profit Center in Sales Order and Deliveries.

What are the different methods of determining cost centers and Profit centers in Sales orders ?
Can Cost Center be determined independently in sales order or will be detrmined from Profit center ?

Hi Sunil
Profit Centres are used primarily in S&D (at billing stage it is transferred to FI) for registering revenue.
Billing -
Integration Points Module
Debit A/R - FI/ CO
Credit Revenue - FI/ CO
Updates G/ L - FI/ CO
(Tax, discounts, surcharges, etc.)
Return Delivery & Credit Memo -
Integration Points Module
Increases Inventory - MM
Updates G/ L - FI
Credit Memo - FI
Adjustment to A/R - FI
Reduces Revenue - FI
Profit Centers can be set-up to identify product lines, divisions, geographical regions, offices, production sites or by functions. Profit Centers are used for Internal Control purposes enabling management the ability to review areas of responsibility within their organization.
The difference between a Cost Center and a Profit Center is that the Cost Center represents individual costs incurred during a given period and Profit Centers contain the balances of costs and revenues.
Regards

Cost center by default in a sales order

Hi,
I would like to put a cost center by default in a sales order.
Because the users forget often to fill this field, that' s why I would like to complete this field automatically.
I have found a point of customizing with OVZ3 but I have no result.
Any body have an idea?
Thank you
Regards
Kari

Kindly use the Incompletnet procedure for making a filed mandatory. Without completion of this field the sales order can not be saved. Goto OVA2 and assign the value cost center at header level in incompletness process. Then go to VUA2 and assigne it to your sales order.
I think this will help you
Suhas

Plan costs calculation during results analysis of sales order

Similar Messages

Maybe you are looking for