Plan Data Transfer
We want to transfer planning data from one ledger (0L) to the other non-leading ledger. Both ledgers are having different fiscal year variants that is why the system is not allowing data transfer. If there is any way to transfer the data among both ledgers then please guide.
Hi,
When the fiscal years differ, when the system cannot copy the figures.
Regards,
Eli
Similar Messages
-
Error in Plan Data Transfer from CO
Hi,
I need to use Plan Data Transfer from CO (FM9C). But when I execute it, I have an error "CO Objects without FM Assgmt".
How can I setup the derivation between CO and FM objects?
All documentation that I've found are for SAP 4.6, but we are using SAP ECC 6.0...Hi,
Are you using former budgeting or BCS? If you use BCS, you should use FMCYCOPI_CO. In any case, to link CO objects to FM entities, use FMDERIVE strategy - it works for planning in the same way as it does for real postings.
Regards,
Eli -
CJR2-The plan data transfer is locked
Hi,
I am planning costs by CJR2 on a WBS element for a certain period and version by cost element.When I execute CJR2,it allows me to enter the values against periods but when I try to save ,system gives error message-The plan data transfer is locked for fiscal year 2009 and version F06 in controlling area 1000.
I have checked in OKP1 and also in CO versions,this version is not locked for any transactions and Fiscal year 2009.Has anyone come accross similar situation and how was it resolved.
Its matter of urgency,any help will be highly appreciated.
Regards,
MTHHi Ravi,
Thanks for your answer.I have checked the statuses and there are no status hampering the Plan primary cost or Periodic reposting Plan data.I guess its more related to the version used.Any other thoughts?Anyone.....
Regards,
MTH -
How to run automatic plan data transfer to Profit Center Accounting?
Can anybody help me telling how to transfer plan data automatically to Profit Center Accounting?
At the moment I use 1ke0 to transfer manually.Hi,
You can the option in Customizong "Define Versions" > Settings for Fiscal Year > choose the Integrated Planning,
but if already exists planned data, set the indicator by tcode KP96.
Regards
Elza -
Where and how to enter plan data cost and profit center wise to get data in grr1
Hi Gurus,
Appreciate you can tell me where and how to enter plan amount cost center wise for cost elements and profit center wise for revenue elements????
So that we can get this data in grr1 report.....
Can we upload this planned data, if yes how??
Thank youHi..
If you use classic PCA, refer to Plan Data Transfer - Profit Center Accounting (EC-PCA) - SAP Library.
If you use new gl pca, refer to Transferring Plan Data from Controlling - General Ledger Accounting (FI-GL) (New) - SAP Library -
CO Document Transfer: Planning Data to General Ledger
Hi,
I have run kp06 for cost center planning.
Subsequently when i was transferring the planning data to General Ledger system is not creating any documents. could some one through light on this
regards
AVhi,
I hv run the fagl_co_plan.
The message as follows.
Log: CO Document Transfer: Planning Data to General Ledger
Processing type Test run
Date 21.07.2010
Time 19:45:54
Check for rcrds Yes
No. of documents not posted 0
No. of docs posted with messages 0
No. of docs posted correctly 0
regards
vs -
Data transfer from planning to ASO.
Hi,
Like that:
Data load in Planning, and data retrieve in ASO. And we want a real time data transfer from Planning to ASO.
Transparent partition from BSO to ASO is a choice, but the performance is an issue.
If we user replicated partition, data cannot be transferred to ASO instantly, since there is a step to replicate data to ASO.
And for Map Reporting Application in Planning, we got the mapping issue, since there are some dimension members totally different between Planning and ASO.
So, can anyone help to show other ways to do that?
Thank you.iTunes does transfer files like pictures, music, video, and I believe under the apps section it should transfer specific app files too.
otherwise I don't know. I tried to get my ipad to link to my computer with bluetooth (it saiys it is linked now) but when I try to transfer a file or browse the device it won't work.... I dunno! -
External Data Transfer to FI-SL Using RGUREC00 - Is Plan Data Supported?
Hi,
I copied standard program (RGUREC00- to load PLAN data into FI-SL ) to z program and changed as per the requirement from client but it dosen't work for 'PLAN Data', it works only for 'Actuals'.
Is there any other program to load PLAN data ?
Please guide me.Check RKEPCU20.
Rob -
How to find the max data transfer rate(disk speed) supported by mobo?
I plan on replacing my current HDD with a new and bigger HDD.
For this I need to know the max data transfer rate(disk speed) that my mobo will support. However, dmidecode is not telling me that. Am I missing something?
Here's dmidecode:
# dmidecode 2.11
SMBIOS 2.5 present.
80 structures occupying 2858 bytes.
Table at 0x000F0450.
Handle 0xDA00, DMI type 218, 101 bytes
OEM-specific Type
Header and Data:
DA 65 00 DA B2 00 17 4B 0E 38 00 00 80 00 80 01
00 02 80 02 80 01 00 00 A0 00 A0 01 00 58 00 58
00 01 00 59 00 59 00 01 00 75 01 75 01 01 00 76
01 76 01 01 00 05 80 05 80 01 00 D1 01 19 00 01
00 15 02 19 00 02 00 1B 00 19 00 03 00 19 00 19
00 00 00 4A 02 4A 02 01 00 0C 80 0C 80 01 00 FF
FF 00 00 00 00
Handle 0xDA01, DMI type 218, 35 bytes
OEM-specific Type
Header and Data:
DA 23 01 DA B2 00 17 4B 0E 38 00 10 F5 10 F5 00
00 11 F5 11 F5 00 00 12 F5 12 F5 00 00 FF FF 00
00 00 00
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Dell Inc.
Version: A17
Release Date: 04/06/2010
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 4096 kB
Characteristics:
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
EDD is supported
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 17.0
Handle 0x0100, DMI type 1, 27 bytes
System Information
Manufacturer: Dell Inc.
Product Name: OptiPlex 755
Version: Not Specified
UUID: 44454C4C-5900-1050-8033-C4C04F434731
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0200, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Dell Inc.
Product Name: 0PU052
Version:
Handle 0x0300, DMI type 3, 13 bytes
Chassis Information
Manufacturer: Dell Inc.
Type: Space-saving
Lock: Not Present
Version: Not Specified
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
Handle 0x0400, DMI type 4, 40 bytes
Processor Information
Socket Designation: CPU
Type: Central Processor
Family: Xeon
Manufacturer: Intel
ID: 76 06 01 00 FF FB EB BF
Signature: Type 0, Family 6, Model 23, Stepping 6
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Not Specified
Voltage: 0.0 V
External Clock: 1333 MHz
Max Speed: 5200 MHz
Current Speed: 2666 MHz
Status: Populated, Enabled
Upgrade: Socket LGA775
L1 Cache Handle: 0x0700
L2 Cache Handle: 0x0701
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 2
Core Enabled: 2
Thread Count: 2
Characteristics:
64-bit capable
Handle 0x0700, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 kB
Maximum Size: 32 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: None
System Type: Data
Associativity: 8-way Set-associative
Handle 0x0701, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 6144 kB
Maximum Size: 6144 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: <OUT OF SPEC>
Handle 0x0800, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PARALLEL
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-25 female
Port Type: Parallel Port PS/2
Handle 0x0801, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SERIAL1
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x0802, DMI type 126, 9 bytes
Inactive
Handle 0x0803, DMI type 126, 9 bytes
Inactive
Handle 0x0804, DMI type 126, 9 bytes
Inactive
Handle 0x0805, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB1
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0806, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB2
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0807, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB3
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0808, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB4
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0809, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB5
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB6
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB7
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB8
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ENET
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x080E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MIC
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x080F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LINE-OUT
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0810, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LINE-IN
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0811, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: HP-OUT
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0812, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MONITOR
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x090A, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT1
Type: x1 Proprietary
Current Usage: In Use
Length: Long
Characteristics:
PME signal is supported
Handle 0x0901, DMI type 126, 13 bytes
Inactive
Handle 0x0902, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0903, DMI type 126, 13 bytes
Inactive
Handle 0x0904, DMI type 126, 13 bytes
Inactive
Handle 0x0905, DMI type 126, 13 bytes
Inactive
Handle 0x0906, DMI type 126, 13 bytes
Inactive
Handle 0x0907, DMI type 126, 13 bytes
Inactive
Handle 0x0908, DMI type 126, 13 bytes
Inactive
Handle 0x0A00, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Disabled
Description: Intel Graphics Media Accelerator 950
Handle 0x0A02, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: Intel Gigabit Ethernet Controller
Handle 0x0A03, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Enabled
Description: Intel(R) High Definition Audio Controller
Handle 0x0B00, DMI type 11, 5 bytes
OEM Strings
String 1: www.dell.com
Handle 0x0D00, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x0F00, DMI type 15, 29 bytes
System Event Log
Area Length: 2049 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: Memory-mapped physical 32-bit address
Access Address: 0xFFF01000
Status: Valid, Not Full
Change Token: 0x00000018
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: System limit exceeded
Data Format 2: System management
Descriptor 3: Log area reset/cleared
Data Format 3: None
Handle 0x1000, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 8 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x1100, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_1
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Manufacturer: AD00000000000000
Handle 0x1101, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_3
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1102, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_2
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1103, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_4
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1300, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FDFFFFFF
Range Size: 4064 MB
Physical Array Handle: 0x1000
Partition Width: 1
Handle 0x1400, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x1100
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 1
Interleaved Data Depth: 1
Handle 0x1401, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000FDFFFFFF
Range Size: 2016 MB
Physical Device Handle: 0x1101
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 1
Interleaved Data Depth: 1
Handle 0x1402, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x1102
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 2
Interleaved Data Depth: 1
Handle 0x1403, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000FDFFFFFF
Range Size: 2016 MB
Physical Device Handle: 0x1103
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 2
Interleaved Data Depth: 1
Handle 0x1410, DMI type 126, 19 bytes
Inactive
Handle 0x1800, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Enabled
Keyboard Password Status: Not Implemented
Administrator Password Status: Enabled
Front Panel Reset Status: Not Implemented
Handle 0x1900, DMI type 25, 9 bytes
System Power Controls
Next Scheduled Power-on: *-* 00:00:00
Handle 0x1B10, DMI type 27, 12 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x0000DD00
Handle 0x1B11, DMI type 27, 12 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x0000DD01
Handle 0x1B12, DMI type 126, 12 bytes
Inactive
Handle 0x1B13, DMI type 126, 12 bytes
Inactive
Handle 0x1B14, DMI type 126, 12 bytes
Inactive
Handle 0x2000, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x8100, DMI type 129, 8 bytes
OEM-specific Type
Header and Data:
81 08 00 81 01 01 02 01
Strings:
Intel_ASF
Intel_ASF_001
Handle 0x8200, DMI type 130, 20 bytes
OEM-specific Type
Header and Data:
82 14 00 82 24 41 4D 54 01 01 00 00 01 A5 0B 02
00 00 00 00
Handle 0x8300, DMI type 131, 64 bytes
OEM-specific Type
Header and Data:
83 40 00 83 14 00 00 00 00 00 C0 29 05 00 00 00
F8 00 4E 24 00 00 00 00 0D 00 00 00 02 00 03 00
19 04 14 00 01 00 01 02 C8 00 BD 10 00 00 00 00
00 00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00
Handle 0x8800, DMI type 136, 6 bytes
OEM-specific Type
Header and Data:
88 06 00 88 5A 5A
Handle 0xD000, DMI type 208, 10 bytes
OEM-specific Type
Header and Data:
D0 0A 00 D0 01 03 FE 00 11 02
Handle 0xD100, DMI type 209, 12 bytes
OEM-specific Type
Header and Data:
D1 0C 00 D1 78 03 07 03 04 0F 80 05
Handle 0xD200, DMI type 210, 12 bytes
OEM-specific Type
Header and Data:
D2 0C 00 D2 F8 03 04 03 06 80 04 05
Handle 0xD201, DMI type 126, 12 bytes
Inactive
Handle 0xD400, DMI type 212, 242 bytes
OEM-specific Type
Header and Data:
D4 F2 00 D4 70 00 71 00 00 10 2D 2E 42 00 11 FE
01 43 00 11 FE 00 0F 00 25 FC 00 10 00 25 FC 01
11 00 25 FC 02 12 00 25 FC 03 00 00 25 F3 00 00
00 25 F3 04 00 00 25 F3 08 00 00 25 F3 0C 07 00
23 8F 00 08 00 23 F3 00 09 00 23 F3 04 0A 00 23
F3 08 0B 00 23 8F 10 0C 00 23 8F 20 0E 00 23 8F
30 0D 00 23 8C 40 A6 00 23 8C 41 A7 00 23 8C 42
05 01 22 FD 02 06 01 22 FD 00 8C 00 22 FE 00 8D
00 22 FE 01 9B 00 25 3F 40 9C 00 25 3F 00 09 01
25 3F 80 A1 00 26 F3 00 A2 00 26 F3 08 A3 00 26
F3 04 9F 00 26 FD 02 A0 00 26 FD 00 9D 00 11 FB
04 9E 00 11 FB 00 54 01 23 7F 00 55 01 23 7F 80
5C 00 78 BF 40 5D 00 78 BF 00 04 80 78 F5 0A 01
A0 78 F5 00 93 00 7B 7F 80 94 00 7B 7F 00 8A 00
37 DF 20 8B 00 37 DF 00 03 C0 67 00 05 FF FF 00
00 00
Handle 0xD401, DMI type 212, 172 bytes
OEM-specific Type
Header and Data:
D4 AC 01 D4 70 00 71 00 03 40 59 6D 2D 00 59 FC
02 2E 00 59 FC 00 6E 00 59 FC 01 E0 01 59 FC 03
28 00 59 3F 00 29 00 59 3F 40 2A 00 59 3F 80 2B
00 5A 00 00 2C 00 5B 00 00 55 00 59 F3 00 6D 00
59 F3 04 8E 00 59 F3 08 8F 00 59 F3 00 00 00 55
FB 04 00 00 55 FB 00 23 00 55 7F 00 22 00 55 7F
80 F5 00 58 BF 40 F6 00 58 BF 00 EB 00 55 FE 00
EA 00 55 FE 01 40 01 54 EF 00 41 01 54 EF 10 ED
00 54 F7 00 F0 00 54 F7 08 4A 01 53 DF 00 4B 01
53 DF 20 4C 01 53 7F 00 4D 01 53 7F 80 68 01 56
BF 00 69 01 56 BF 40 FF FF 00 00 00
Handle 0xD402, DMI type 212, 152 bytes
OEM-specific Type
Header and Data:
D4 98 02 D4 70 00 71 00 00 10 2D 2E 2D 01 21 FE
01 2E 01 21 FE 00 97 00 22 FB 00 98 00 22 FB 04
90 00 11 CF 00 91 00 11 CF 20 92 00 11 CF 10 E2
00 27 7F 00 E3 00 27 7F 80 E4 00 27 BF 00 E5 00
27 BF 40 D1 00 22 7F 80 D2 00 22 7F 00 45 01 22
BF 40 44 01 22 BF 00 36 01 21 F1 06 37 01 21 F1
02 38 01 21 F1 00 39 01 21 F1 04 2B 01 11 7F 80
2C 01 11 7F 00 4E 01 65 CF 00 4F 01 65 CF 10 D4
01 65 F3 00 D5 01 65 F3 04 D2 01 65 FC 00 D3 01
65 FC 01 FF FF 00 00 00
Handle 0xD403, DMI type 212, 157 bytes
OEM-specific Type
Header and Data:
D4 9D 03 D4 70 00 71 00 03 40 59 6D 17 01 52 FE
00 18 01 52 FE 01 19 01 52 FB 00 1A 01 52 FB 04
1B 01 52 FD 00 1C 01 52 FD 02 1D 01 52 F7 00 1E
01 52 F7 08 1F 01 52 EF 00 20 01 52 EF 10 21 01
52 BF 00 22 01 52 BF 40 87 00 59 DF 20 88 00 59
DF 00 E8 01 66 FD 00 E9 01 66 FD 02 02 02 53 BF
00 03 02 53 BF 40 04 02 53 EF 00 05 02 53 EF 10
06 02 66 DF 00 07 02 66 DF 20 08 02 66 EF 00 09
02 66 EF 10 17 02 66 F7 00 18 02 66 F7 08 44 02
52 BF 40 45 02 52 BF 00 FF FF 00 00 00
Handle 0xD800, DMI type 126, 9 bytes
Inactive
Handle 0xDD00, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 00 DD 00 01 00 00 00 10 F5 00 00 00 00 00
00 00 00
Handle 0xDD01, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 01 DD 00 01 00 00 00 11 F5 00 00 00 00 00
00 00 00
Handle 0xDD02, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 02 DD 00 01 00 00 00 12 F5 00 00 00 00 00
00 00 00
Handle 0xDE00, DMI type 222, 16 bytes
OEM-specific Type
Header and Data:
DE 10 00 DE C1 0B 00 00 10 05 19 21 01 00 00 01
Handle 0x7F00, DMI type 127, 4 bytes
End Of Table
Hdparm also does not tell me the max data transfer rate (disk speed) of my current drive although this link : www.wdc.com/en/library/sata/2879-001146.pdf says that it is 3.0Gb/s
and here's hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: WDC WD800JD-75JNC0
Firmware Revision: 06.01C06
Standards:
Supported: 6 5 4
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
CHS current addressable sectors: 16514064
LBA user addressable sectors: 156250000
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 76293 MBytes
device size with M = 1000*1000: 80000 MBytes (80 GB)
cache/buffer size = 8192 KBytes
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 8
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
SET_MAX security extension
Automatic Acoustic Management feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* SMART error logging
* SMART self-test
* Gen1 signaling speed (1.5Gb/s)
* Host-initiated interface power management
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
Checksum: correct
Last edited by Inxsible (2011-03-27 04:40:49)I just checked my BIOS and my current setting is set at IDE although it also mentions that the default should be AHCI. Currently I have a dual boot of Windows 7 (need it for Tax software) and Arch
So I guess, when I get the new HDD, I will first set it to AHCI and then install the OSes on it. See if NCQ helps any, and if not I will turn it back and re-install (if I have to). I am planning to have Windows only in virtualbox in the new drive.
Anyhoo, while I was in the BIOS I found two things which I had questions about :
1) Under Onboard Devices --> Integrated NIC , my setting is currently set at "On w/PXE" and it says the default should be just "On". Would it be ok to change it back to On since its a single machine and its not booting an OS on any server. I just don't want to have to re-install anything now since I will be doing that in the new HDD.
2) How would I know whether my BIOS would support a 64 bit OS in Virtualbox? I checked some setting under Virtualization, but they weren't very clear.
I will edit this post and let you know exactly what settings were present under the Virtualization sub-section. -
We run a small network in our office consisting mainly of Intel iMacs we purchased several months ago. The server computer is a brand new Intel Mac Pro server with 4 500 gig drives raided together, two 2.66GHz dual core intel processors, all the other bells and whistles we could think of, etc. We added in two fiber-optic switches: one in the server room, one in the office. The switches connect to each other and the server with fiber optic cables, but the iMacs connect with ethernet cables.
We had the iMacs for a while but we just recently got the new server and upgraded our old 100 base switches. Afterwards we wanted to test out the data transfer speeds, as we plan to back up to the server frequently. We were dismayed to find that transfer rates capped out at 60 MegaBytes/sec according to the Activity Monitor's Network Activity tab. In fact, it would range mostly from 40-45MB/sec. None of us here have much experience with networking, but that seemed a tad too slow. My basic math tells me that a byte is 8 bits, and from that a Gigabit network should transfer data at 120 MegaBytes/sec, which is three times the speeds we were actually seeing.
We sent data both to and from the server in order to test this. Thinking it was perhaps a problem with the ethernet itself, we grabbed an external FireWire hard drive and transferred data from one of the iMacs directly to it and noticed exactly the same transfer rates. We plugged two iMacs directly into each other and transferred at the same rate, ~45MB/sec.
Well this was highly frustrating. All Macs supposedly ship with Gigabit ethernet since, what, 2002? Earlier? Why are our speeds so slow? We thought the hard drives might be slow, so we got info on the drives and googled them for their tech specs. The iMacs' Western Digital drives are capable of much much faster speeds according to everything we've read.
We started reading anything we could online that addressed this issue. Some information read the problem might be that the optical DVD-R/CD-R drive was only capable of slower transfer speeds. Since the optical drive and the hard drive are on the same bus it would slow down the hard drive's maximum transfer rate, much like having a Gigabit hub with a 10 base computer plugged into it would slow the entire network down (which is of course why we use switches instead of hubs). Is there any truth to this? If this is, in fact, the case, can we bypass this bottleneck somehow? I'm not talking about opening the computer and manually disabling the optical drive, as that's a waste of a perfectly good DVD-R/CD-R drive.
Also, if this is true, why in blue blazes is Apple flaunting Gigabit ethernet if the computer can only take advantage of 1/3 the speeds Gigabit ethernet has to offer?! I'll happily provide any more information that's relevant to the problem at hand.
Thank you
Mac OS X (10.4.8)Here's the specs for the default Hard Drive that Apple put in here:
http://www.westerndigital.com/en/products/Products.asp?DriveID=137
From that page
Buffer To Host (Serial ATA) 300 MB/s (Max)
Buffer To Disk 748 Mbits/s (Max)
I have no idea what signaling overhead for my data transfer protocol means.
The ethernet cords are no longer than 20 feet, are all Cat5E, and are well shielded. There is little to no ElectroMagnetic interference in any area they run. The longest cable is the Fiber Optic one, which runs about... oh... 40 yards? These were all installed by professionals.
I feel it's important to stress the fact that we tested an isolated direct computer to computer transfer with a single 6 foot Cat5E Ethernet cable and still experienced the same speeds that we experienced over the network. We tested multiple computers, multiple cables, multiple files. -
0vtype =20 (plan data) not populating to cube but present in psa
Hello Experts,
I have a requirement in BW 3.5 where in I need to create a report on multiprovider which should give the actual data,plan data and the difference between actual and plan data for some key figures.
The data flow is like this
There are two cubes one for actual and the other for plan ,I am able to get the actual data (10) for actual cube from R/3 .
But the problem is with plan cube,I am not able to get the plan data (20) to the plan cube (to the field 0vtype) ,but the data is coming till psa from R/3,there is no routine present in update rule also,but still data is not showing up for this 0vtype in plan cube...
I have tried loading selectively (020) by giving 020 as constant in the update rule..but still no luck
The datasource that is fetching plan data is 1_CO_PA_PLN1000.
Could you please suggest how to proceed further
Thanks,HI Sashi,
Checking the mapping between the 0vtype and the source fiedls.
Check in transfer rules first if it is mapped or not.
Transfer rules are not mapped to source fields then correct it .
Hope this helps.
Regards,
Reddy -
Data transfer b/w SAP to Java using IDOC and Interface SAP Jco
Dear Experts,
The challenging requirement we are having is, we need to create the interface for data transfer between SAP system and the Java system. The data will be transferred from SAP to java and similarly once some processing done in Java again the details needs to be transferred from Java to SAP.
For this data transferred we are planning to use IDOC process and for interface "SAP Java connector (Version 3.0.5)" we are planning to use. As per our understanding, from Java side one program needs to be written to connect with SAP as "Registered program". This registered program will appear in SAP GATEWAY automatically and using tRFC, TCP/IP connection both SAP and Java system will be connected.
In this case we are having some doubts.
1. The data from SAP is going to be transfered from one Custom transaction (Z tcode). Once "Outbound IDOC" will get triggered and will carry the details. Now the doubt is, whether the data / details will get transfered to JAVA system automatically or we need to perform any other steps from SAP ABAP coding...(like converting in to flat file, XML file and etc) ??
2. We are planning to install "SAP Jco" in Java server. Is this correct...??
3. Other than SAP Jco any other softwares needs to be installed or not..??
4. Since we are going to trigger the "outbound IDOC" from custom transaction, we are planning to develope one program in SE37. Other than this any other program we need to develop or not..??
5. Any sample Java program for the SAP Jco version 3.0.5 to create the "Registered program" with SAP..? (e.g. SAP Listener program).?
If anybody has detailed steps or explanation please share it with us.
Thanks in advance
Warm Regards,
VELHi All,
For the above mentioned issue, we implemented JCo software in JAVA system and created the JAVA program including SAP logon credential details like Client, User name, password and Language details.
When this JAVA program was compiled successfully then, that non SAP system will appear in SAP gateway Tcode.
Once non SAP system started appearing in SAP gateway that means, both SAP & Non SAP are connected automatically.
Regards,
Velmurugan P -
Hai gurus,
I am new to Abap field.
Kindly confirm whether i had to use LSMW or BDC for the following data transfer.
Production and Planning:
1) Bill of material creation-
2) Recipe creation-
3) Resource creation-
Quality Control.
1) Quality plan
2) Quality sampling procedure.
3) Quality info record.
4) Master Inspection Characteristics.
5) List of material with inspection status
6) Inspection Method.
7) Sampling plan
waiting for the positive reply.
Regards,
scHi Sekar,
If you have huge number of records & the process is onetime process, you can go for LSMW, no ABAP knowledge is required for this.
Hope this helps.
Rdgs,
Sripal -
Extraction of CO Plan data with filter on company code
Hello,
I have this urgent requirement:
Extracting CO Plan data (from COSP) by selecting on the company code.
Problem: company code not in extract structure used by 0CO_OM_CCA_1
Actual data are extracted with 0CO_OM_CCA_9.
My first idea was to use make an append to the extract structure of 0CO_OM_CCA_1 (i.e. BUKRS) and to fill this new field in the CMOD enhancement.
Do you have any other hint?
Thxs.
LauQHi,
I donot think the Selection works with any Customer enhanced fields(i.e the fields foe which, code written in CMOD) . So you have to keep filter some where either in Transfer rules or in update rules.
Or Check whether you can replace the datassource 0CO_OM_CCA_1 with the datasources:
0CO_OM_CCA_10
0CO_OM_CCA_9.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma
Message was edited by:
Anil Kumar Sharma -
Errors in ALE data transfer to E-Recruiting.
Hello,
I need help with my ALE for E-Recruiting.
We are on E-Rec 604 with seperated standlone e-rec system.
We have set up ALE Data transfer for object type P from ECC QA to E-Rec QA system but unfortunately the I-Doc is always gettign posted with status 52.
Those are the messages:
Object 01 ,P ,01012021 does not exist: infotype 0105 cannot be created
Object 01 ,P ,01012021 does not exist: infotype 0009 cannot be created
Object 01 ,P ,01012021 does not exist: infotype 0006 cannot be created
Diagnosis:
You have tried to create infotype 0105 for plan version 01,object type P,object ID 01012021. However,the object does not exist.
PA objects exist if infotypes 0000, 0001, and 0003 have been created.
PB objects exist if infotypes 4000, 0001, and 0002 have been created.
PD objects exist if infotype 1000 has been created.
I followed the setting of "standalone" attachment to note 997181:
HRSYNC_P CONV_HR_DATA_TO_EREC (active as of Release 604)
HRALE00INBOUND_IDOC HRRCF00_INBD_NEWMOD (active as of Release 604)
HRALE00SPLIT_INBOUND HR_INB_PROCESS_IDOC (inactive as of Release 604)
HRALE00INBOUND_IDOC HRRCF00_DELETE_SPREL (inactive as of Release
604)
HRALE00SPLIT_INBOUND HR_INB_PROCESS_IDOC (active up to Release 603)
HRALE00INBOUND_IDOC HRRCF00_DELETE_SPREL (active up to Release 603)
So we have activated only the CONV_HR_DATA_TO_EREC and HRRCF00_INBD_NEWMOD because we are on 604.
We have distributed Infotypes 0000, 0001, 0002, 0105 (Subtypes 0001 and 0010), 0006, and 0009 and I have to distribute the P - CP relation with 1001 A209.
Somebody could help me please?.
Thanks,
EstherHi Esther,
Can you share you inputs how you have fixed the issue.
Currently we are following I2 A Scenario according to the link
http://help.sap.com/erp2005_ehp_05/helpdata/en/49/46037f06971ec6e10000000a42189b/frameset.htm
DO we need activate the swiches in HR System or Erec System.I believe it has to be in HR
HRALX HRAC - X
HRALX PBPHR ON
HRALX USRAC X
RECFA HRRFC
RECFA RECCE
RECFA DTCBA
BADI do i need to activate only below one's
HRSYNC_P
CONV_HR_DATA_TO_EREC (active as of Release 604) HR system
HRALE00INBOUND_IDOC
HRRCF00_INBD_NEWMOD (active as of Release 604) Erec System.
Correct me if im wrong.
Maybe you are looking for
-
Can't log in with existing account
hi, My original account's iCamiel but when I visit apple discussions and I click on log in I automatically go to a page for creating a new account in wich my apple mailadres is used. I can't change that to my hotmailadres and neither can I log in und
-
How do i change the image path at run time in wpf ?
I have a button and i need to show image two different image based on condition. <Button x:Name="btn" MouseEnter="btn_MouseEnter_1"> <Button.Template> <ControlTemplate TargetType="Button"> <StackPanel Width="43"> <Image Name="btnS" Source="Resources
-
Function module(s) for Cube Collapsing/Compression
Hi Experts, can anybody tell me if there's a SAP Function module availbale for Collapsing/Compressing requests of a cube ? Background is we want to automate collapsing of cubes by an APAB report instead of using a process chain or RSA1. Any suggestio
-
Does MACBOOK PRO OSX 10.9.3 work with Lightroom 4 ?
-
Poor wifi connection on ipad 2
Hi all, I head my ipad 2 for around 15 months. I only started having this problem around 3 months ago but it's really starting to get annoying now. When I take the ipad up to bed the signal is none existant. My bedroom is above and across a room from