Plan Drive Procurement - Splitting PR for Sourcing and Procurement

We have implemented SRM - Plan Driven Procurement Scenario.
Example of requirement
Material - XXXX
Material Group - 1000
Pur.Grp - ABC
If this Material Group 1000 and Pur.Grp ABC are setup in R/3 for External Procurement, all Purchase requisitions in R/3 will be routed to SRM.
However we would like to create Purchase Orders in R/3 for those Purchase Requisitions that have a Contract/Outline Agreement.
Can anyone suggest alternatives

Hi,
  Kindly check OSS Note 648074. I believe this could be a solution or workaround for you

Similar Messages

  • Plan on going to Manila for vacation and going to bring my iPad 4. Need your  advice what to do.

    Plan on going to Manila for vacation and going to bring my iPad 4. Need your  advice what to do.

    Hello Aongtan051,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    About Apple World Travel Adapter Kit
    http://support.apple.com/kb/HT4341
    The World Travel Adapter Kit includes a USB power adapter, a 30-pin to USB cable, and a set of six AC plugs with prongs that fit different electrical outlets around the world. For world travelers, this is the perfect kit to ensure power connectivity in most countries you may travel to.
    Best of luck,
    Mario

  • Sales forecasting scenario for production and procurement

    Hello Gurus
    We have currently one scenario  need your inputs and expertise
    We have a requirement for the Sales forecast for the production and procurement planning. More over its like demand planning but sales needs to have a 6 months or yearly sales forecast in the system.
    Is there any option or functionality available for the same.in  SAP-SD
    Thanks inadvance
    Regards
    Venkat

    Hi KV chalapathi
    check this link
    How to maintain Sales forecast or projection in SAP
    hope clear your issue
    Regards,
    Krishna

  • How big a hard drive do I need for iMac and Time Machine?

    Sorry if this has been answered elsewhere already. I am going to buy an iMac, probably the new 24" with a 320G internal HDD. I already have one Lacie external 320G HDD so I was wondering whether I can use this for Time Machine backups, or do I need to buy a bigger one? If so, how big? Is there a rule of thumb for working out how much hard drive space you need to have for Time Machine, for instance if I were to buy the 500G iMac what would I need?
    thanks.

    I agree with the "double the size" rule of thumb. You should also consider how much of the 320GB you are actually using and are likely to use in the next year or two. After all, it's the amount of storage you use that matters, not the size of the disk. Disks will very likely be cheaper soon. You should also keep in mind that TM deletes old archive data when it runs out of disk space. So as long as you have more disk space than you have data to back up, TM will work, though you will lose older versions of your data.
    So if your 320GB drive only has 100GB used and you're not the kind of person who eats up disk like there's no tomorrow, the 320GB drive should be fine for now. If you expect that 320GB disk to be full soon then a 750GB TM disk is more like what you need.
    The same logic applies to a 500GB iMac. If you only expect to use 250GB in the next year or two then a 500GB TM disk should be OK. A 1TB drive will be a lot cheaper next year or the year after.

  • How to create Same file names for source and target.

    hi
    Can any body send Procedure for below requirement.
    how to create the dynamic file names for a source and save the file with same name in the Target, because it has to identify that which sender had sent the file and the target file should be again sent back to the customer as a link.
    Please help me.
    Thanks

    Hi,
    See the below link
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - sender file name as receiver file name
    Regards
    Chilla

  • Expdp with network_link and different character sets for source and target?

    DB versions 10.2 and 10.1
    Is there any limitation for implementing expdp with network_link but target and source have different character sets?
    I tried with many combinations, but only had success when target and source have the same character sets. In other combinations there was invalid character set conversion (loose of some characters in VARCHAR2 and CLOB fields).
    I didn't find anything on the internet, forums or Oracle documentation. There was only limitation for transportable tablespace mode export (Database Utilities).
    Thanks

    Hi DBA-One
    This link
    http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_overview.htm#CEGFCFFI
    is from Database Utilities 10g Release 2 (10.2) (I read it many times)
    There is only one thing about different character sets.
    I quote:
    Data Pump supports character set conversion for both direct path and external tables. Most of the restrictions that exist for character set conversions in the original Import utility do not apply to Data Pump. The one case in which character set conversions are not supported under the Data Pump is when using transportable tablespaces.
    Parameter VERSION also doesn't play role here, because the behaviour (character set) is the same if I use for target and source only 10.2 or (10.2 and 10.1) respectivly.

  • MDM Workflow - Split jobs for Adds and Updates

    I am trying to set up a workflow where the inbound file contains Adds and Updates. I want the Adds to get added to a new workflow and the updated records to split off into a separate workflow branch where they will be automatically processed.
    Any ideas on how to split these records?
    Regards,
    Brent

    Have a Status field in the data model. This status field will have "Add" or "Change" as the possible values.
    When record gets added, you set this flag to "Add".
    When record gets changed, you set this flag to "Change".
    Have a validation step. for Record = Add.
    If the validation passes, then it is a "Add scenario". Use the branch step for the validation success branch and the validation failure branch.
    You should now have two branches one for add and the other for change.

  • Bought apple iphone 4s 16gb in error from family member, but wanted 32gb.  Is there anyway to increase space, as planning to use a lot for music and photos

    Bought iphone 4s 16gb from family member in error.  Wanted 32gb as present for daughter
    Is there anyway to increase space as need lots for photos and music, other than deleting stuff!!

    harryham12 wrote:
    Bought iphone 4s 16gb from family member in error.  Wanted 32gb as present for daughter
    Is there anyway to increase space as need lots for photos and music, other than deleting stuff!!
    No.

  • Can plugins be installed to drives other than C: for AE and/or PPRO?

    hello,
    i am running win 7 64 bit
    os is on drive c:
    page file is on drive d:
    scratch disk is on drive e:
    media cache is on drive f:
    footage is on drive g:, h:
    final render is on drive i:
    i have an esata external enclosure
    with 4 more drives
    i would like to install video copilot and red giant plugins on drive j:
    and install some boris plugins on drive k:
    it has been said that adobe programs like to be on c:
    my question is am i setting myself up for trouble
    by installing plugins (and the subsequent footage associated with these plugins)
    on drives other than c:?
    (i am not comfortable setting up any kind of raid yet
    so everything is being treated as single drives)
    (also, all drives are 10k)
    thanks in advance,
    j

    hello Harm,
    thanks for the answers
    gonna spend the day moving files around
    clean is good
    as far as the memory, i'll figure that   one out next
    is overclocking memory that easy ?
    actually if i could ask another question:
    with a stock i7 930 at 2.8Ghz
    and 16gb DDR3 1600Mhz 9-9-9-24 memory
    what are stable results to expect for an oc'ed cpu
    and memory running at 1600? 
    would oc'ing the cpu be worth the extra 'wear and tear'?
    i'm editing avchd .mts files
    (most threads state that avchd is cpu intensive)
    so far i'm very happy with cs5
    again, i more trust answers from within this forum
    than googling stuff and checking reviews, what not
    thanks again and good morning,
    j

  • Can I Split Coax for TV and Add a Second Modem for Internet?

    Wireless does not work throught the house and I need a wired connection in room upstairs.  There is no way to get another coax up to that room from basement so I guess I need a second modem.  Is there a way to use the TV coax that is already wired into room and split it so I can connect a modem and a TV to the cable?  Would prefer not to have a second modem if there is another way to do it.  Thanks.
    Solved!
    Go to Solution.

    why yes, yes, you can...
    »Verizon Online FiOS FAQ »Can I get an ethernet connection in a room with only coax?
    JohnRI wrote:
    Wireless does not work throught the house and I need a wired connection in room upstairs.  There is no way to get another coax up to that room from basement so I guess I need a second modem.  Is there a way to use the TV coax that is already wired into room and split it so I can connect a modem and a TV to the cable?  Would prefer not to have a second modem if there is another way to do it.  Thanks.
    you will need a 1ghz splitter, and a second device though.  You will need a NIM 100, or an ECB2200 those are moca/coax to ethernet bridges for FiOS.    Or a 2nd router (super cheap on ebay)

  • ATP for manufactured and procured materials

    We have a scenario that we have essentially a make-to-order process but occassionally, due to setup costs, manufacture more than what is needed to satisfy the sales order line item that triggered the planned/production order.
    In other words, when sales order ATP executes, we would like  to first check for unrestricted inventory to supply the order.  If there is available inventory, it should be used on the sales order line item.
    If there is no inventory on hand, we want MRP to run and create an order using the Make-to-order process.
    Can someone help wtih this?
    Thank you,
    bak

    Hi Bak,
    The only way i have seen this done in the past is to create two materials codes for the sames material one is the stock item and the second is MTO, so when you have stock you can use the stock material code or there is none in stock to use the MTO material code.
    The second option is too have one material that is MTO but when the order is placed to check if there is available stock and then to do a Stock to sales order stock material transfer. then when you run the ATP check the stock is available and no production is generated

  • Drag & Relate Relation Editor ins't accessiable for source and destination

    Dear all,
    we've install a EP 7 SPS 15 and want to use the relationship editor, after we've import the business objects from a systeme where we have already a connection with ep6 the objects are available, but when we want to add them as source / destination to the relationshipeditor, there comes up an Website error :
    mtxSelect error no object
    we try this with IE 7 and 6 and Firefox, but for fierfox there wasn't any message.
    So we need some ideas why or what can we do to fix / find the reason for this error.
    Best regards
    Thorsten Stracke

    I am getting the same error. If anyone know what might be causing this, please help.
    Thanks,
    Alex

  • USB Drive not downloading software for Camera and other new devices - HP Desktop G5418uk

    Product:- HP Desktop G5418uk
    Operating system:- Windows 7
    Error message:-Installing Device Driver Software - followed by - Device Driver Software was not succesfuly installed, no Driver found. 
    I purchased a new Creative Plug and play WebCam which I could not get to work although it worked on shops Desk Top. I returned it and the shop changed it for a  Microsoft WebCam but the same thing happened. I have since tried to use 2 separate pen drives and the drivers will not down load. Existing plug and play such as my external Hard drive work as normal so the problem has only risen for new equipment. Don't know how long ago but this has been going on for 6 months. I have also successfully installed the Camera on my old desk top without any problems. Any help someone can give would be very much appreciated.
    This question was solved.
    View Solution.

    When asking for assistance, the basic questions need to be answered.
    1) I have also successfully installed the Camera on my old desk top without any problems.   What OS? 
    2) Have you checked within Device Manager for any Yellow or red flagged USB ports?
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Using isetup for source and target instace being same.

    Can we use isetup to create a replica of existing operating unit and the modules connected with it?
    Ahmed,

    Yes, Yes. Very much. You can have a look at 'Financials Operating Unit Level Setup' selection set to achieve what you are looking for. Here is the step to do:
    1) Create an Extract using 'Financials Operating Unit Level Setup' selection setFinancials Operating Unit Level Setup' selection set
    2) After successful completion of Extract, transform the Extract using Transform module. During transform you can change the Operating Unit name.
    3) Load the Transform to same instance.
    Make sure that you have all mandatory patches applied on your instances. I have documented the required patches on each release in the announcement section.
    Thanks
    Mugunthan.

  • Split view for before and after changes?

    One feature I used to use a lot on Lightroom as where it would show a split view showing the image before and after changes (adjustments). I cannot find how to do this in Aperture - is it possible, what is this feature called?
    (and before any smart person tells me to look in help, I'm tired of responses like that. I've looked and didn't find, and that's why I'm asking here. I've tried Compare, and Before and After Changes etc.)

    Unfortunately, no, there is no ability to do the split view like Lightroom has. It's a nice feature.
    The closest you can do is to flip back and forth between two versions. Because when you view the master in aperture it shows the original file without crops and straightening, I suggest that once you crop and straighten, you then create a new version and work on that (this is as close as you can get to LR's "snapshot" functionality). You can then flip back and forth between the two versions to see the changes... but you can't see them side by side with a split.

Maybe you are looking for