Plan route on PC and upload to N95 8GB

I want to plan a route on my PC (on Google maps for example) and upload this pre-planned route onto my N95 for navigation. Is there a way to do this?
Thanks
Message Edited by skillo on 09-Jul-2008 02:17 PM

Actually, I forgot to mention that you can actually set waypoints in Nokia Maps by using "Add to Route". If you add enough waypoints along the route then you are kind of forcing Nokia Maps to take that particular route.
I know it is a long winded way of doing it but it will do what you want
That Maps on Ovi sounds interesting. Must have a look.
Message Edited by cjlim on 09-Jul-2008 04:44 PM

Similar Messages

American owner of the n95 8gb...

If you live in the U.S. and own a n95 8gb could you please reply to this or message me because I have some questions I would like to ask you. Thanks.

yeah that would be a good idea huh?... Alright I was wondering how the internet compared to the iphone?.. I'm asking b/c I've used an iphone's internet and think it is quite slow. I know the n95-2 will be on an EDGE network like the iphone, but is it as slow? And also, I've heard that the n95 8gb isn't covered under warranty by nokia if it is used in the U.S. b/c it isn't a U.S. model. I've emailed nokia asking about this and they keep asking me to enter and IMEI number (or something like that). If you have a n95 8gb and live in the U.S. could you just clear these things up for me?

My iPad 4 needs to be right beside my router to get 3 bars. When I walk 15 feet away from my router, I get 1 bar with terrible download and upload speed.

I get no connection from being away 20 feet from the router, my iPod 5 gets 2 straight bars but my iPad 4 gets no connection and it:s right beside my iPod 5 too. what the ****??! I got a iPad 4 running iOS 7.0.4. I charged it and it"s acting wonky. I reset network settings and that didn't work at all. any other ways Apple nerds?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How to Change Your iPhone’s (iPad’s) DNS Servers
http://www.macinstruct.com/node/558
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Excel Download correct and upload

Hi Oracle Apps Design Gurus,
We are involved in designing an application involving download , correct and upload of quotes data. The specific s of the requirement are:
1. Extract Quotes data: Buyer runs a process to extract Quotes data with select parameters.Selected Quotes data extracted in spreadsheet format.
2. Update extracted Quotes data: Buyer updates the Quote data in Excel. Updated Quotes data is ready to be uploaded into Oracle.
3. Upload modified Quotes data: Buyer uploads the spreadsheet with updated Quotes data into Oracle.     Updated Quotes data is loaded in to Oracle. Exceptions are output in a report.
Some of the constraints of this design:
1. Client has only e-business suite license. No other oracle tools which require license may be used.
2. Client wants to achieve this within the standard framework as far as possible.
3. Complex navigation from one form to another is not wanted.
The first thing that occured to us was the use of Oracle Web ADI for this. But we are not sure as to how that can be used to download correct and upload in the same spreadsheet.
We will be much grateful for any help in desgning this or any alternative approach to the problem.
Thanks,
Avi

Step one: Visit http://www.giganews.com/line_info.html and post up the Traceroute the page shows, if you wish. Be aware that your non-bogan public IP Address will show up. It might shown up as the final hop (bottom-most line of the trace) might contain a hop with your IP address in it. Either remove that line or show only the first two octets. What I'm looking for is a line that mentions "ERX" in it's name towards the end. If for some reason the trace does not complete (two lines full of Stars), keep the trace route intact.
For example this what I saw when I was using Verizon
news.giganews.com
    traceroute to 71.242.*.* (71.242.*.*), 30 hops max, 60 byte packets
    1 gw1-g-vlan201.dca.giganews.com (216.196.98.4) 13 ms 13 ms 13 ms
    2 ash-bb1-link.telia.net (213.248.70.241) 39 ms 7 ms 7 ms
    3 TenGigE0-2-0-0.GW1.IAD8.ALTER.NET (63.125.125.41) 4 ms 4 ms GigabitEthernet2-0-0.GW8.IAD8.ALTER.NET (63.65.76.189) 4 ms
    4 so-7-1-0-0.PHIL-CORE-RTR1.verizon-gni.net (130.81.20.137) 6 ms 6 ms 6 ms
    5 P3-0-0.PHIL-DSL-RTR11.verizon-gni.net (130.81.13.170) 6 ms 6 ms 6 ms
    6 static-71-242-*-*.phlapa.east.verizon.net (71.242.*.*) 32 ms 32 ms 33 ms
Step two: Can you provide the Transceiver Statistics from your modem?
#3 If you don't know how to get that info:
a) What is the brand and model of your modem?
b) If you have a RJ-45 WAN port router connected to it: What is the brand and model of the RJ-45 WAN port router?
#4 If you have a RJ-45 WAN port router connected to the modem, even if you know how to get the Transceiver Statistics from the modem: What is the brand and model of the RJ-45 WAN port router?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Download and upload speed per ssid in air-sap2602.

Dear team,
How to limit the download and upload speed per ssid in air-sap2602 ?
SSID =5MB download + 1upload
SSID= 30MB download + 5upload
Regards

If you need help with traffic shaping, you should post your question on the rLAN, Switching and Routing forum:
https://supportforums.cisco.com/community/netpro/network-infrastructure/switching
You can also look for examples by searching Configure 1941 traffic shaping:
http://www.cisco.com/en/US/docs/ios/12_2/qos/configuration/guide/qcfgts.html
http://www.cisco.com/en/US/docs/ios/12_2/qos/configuration/guide/qcfcbshp.html
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Isolated: WEP is messing up my web browsing and uploads. Why?

My web browsing and uploads keep "hanging" when accessing my AP Extreme wirelessly.
A straight HTML downloads fine. But a page that has code that talks back to the server (e.g. a Google docs page) hangs. Also it seems that javascript navigation that sends info back up to the server also hangs.
I just discovered after resetting my base station, this only happens when I use WEP encryption.
I don't want to leave my network open. How do I fix this?

If you search you'll find lots of complaints about this very problem. I'm not sure that a single, specific solution was ever reported.
I suffered from this problem also. To me it seemed to be related to the fact that I had the "Create closed network" option selected.
It also seemed that I had to make sure I entered the IP address of my router, but in my case that is because the AEBNs are not providing my DHCP service - my DSL router is.
There is also an Airport Extreme update out on Apple's web site that may help.
Whatever the problem(s), in my case turning off "Create closed network" and entering my router's IP address in the AEBN configuration seemed to solve the issue.
And, by the way, it was Google that I was having a problem with, and Google that everyone else was having a problem with!
Good luck.

Planning layout for material and cost element

Dear all,
i need to upload data from r/3 and start planning from data i have uploaded.
data is as follows:
year month material amount
what i need to do is to put data in planning layout and put cost element next to that and manually enter cost element.
so desired column is like that:
year month costelement( enter manually) material amount(enter manually)
is it possible and how?
thanks

Hi,
You can do it.Take a look at the best practice below.It is telling step by step how to do cost center accoıunting planning.
http://help.sap.com/bp_biv235/bi_en/html/BW/CostCtrPlan.htm
Regards.

When will Apple have a searchable text reader and upload file capability?

When will Apple have a searchable text reader and upload file capability? I have a large text file I need to upload to my iPhone, search, and dial.
Anything planned?

I had a Palm the I used for work and travel it had a very nice application called DOCUMENTS TO GO. It allowed you to upload, view, and edit .doc, .xls, and .ppt files. this was very handy when traveling. Also, I could sync my palm with my iMac and work PC using bluetooth, took care of the file transfers as well. I would like to have the same capability on my iPhone. I bought it to replace all of my old stuff i need it to the same as my old stuff. I hope that Apple reads this and gets on the ball. Until then I still have to carry my Palm or thumb drive on trips.

N95 8GB cannot view gallery photos/ uploads photos...

Hiya,
I have had the same problem with my N95 8GB with viewing photos in my gallery!
I have now got my 5th replacement handset (Orange) since August 29th due to various faults and issues. The main one being trying to transfer photos from my PC to my mobile via the Nokia PC Suite or just via USB cable. Both of which when I try to then go into the gallery view on the phone caused it to freeze. Unable to view any images!
This keeps happening, and I have even tried running the 'N series installation disk' and still the same issues. I thought that such a good spec phone with 8GB memory would be able to hand just 2 jpeg images without freezing!
Has anyone else had the same problem or am I just unlucky? I have got up to date anti virus software on my PC, and have tried different images each time. My previous phone (n95) was able to upload and export pics and music to my PC no problems ever!

yes it is very odd!
Well I have tried to just loads 2 images from the laptop onto my mobile. I have tried doing a direct file transfer (mass media) and then also tried through Nokia PC suite-uploaded via the CD rom I was given.On both occasions this has been uncessful to view images from the gallery menu on the phone..crashes!
I think the photos are actually on the phone under the file manager folder I can find them stored here. However on opening the gallery to try and view these files, the phone freezes and I am unable to exit the menu -using the 'back' button have to press the red phone cancel button. Once out of the gallery folder and back to the main screen I can then no longer access and shortcut menus for about 3mins. Very frustrating. The most recent phone I have now, I got 2 days ago-I've not even plugged into my laptop, and when asking a friend to send me images via bluetooth I cannot open this either!! (it comes as a text format from bluetooth) and on opening the phone just freezes again. I try to save this when asked to mass memory and not phone memory.
I can take images on my 'phone camera' but again cannot view as unable to access the gallery-constantly freezes the phone.The images are not a large file just jpeg format for example 45KB another one I tried was much larger 1MB...
I still don't understand why this is happening all the time!!! Many thanks for your help.... (Orange are going to send me a new sim card to try) and see if this helps.

[N95 8Gb] No more MP3 ringtones and message tones....

Hi,
Last night I cleared my N95 8Gb of all the music and tranferred some new albums with Nokia Music afterwards. Now I'm not able to select any song or sound effect from my music collection as ringtone anymore!!
I can select a song in Music Player and set it as ringtone but I cannot go via settings and browse my MP3's... The same goes for message tones: I'm only able to select the standard **bleep** ringtones and none of the sound effects I uploaded as MP3 using Nokia Music.
I beginning to be amazed at how **bleep** Nokia Music can possibly be: before, everything worked like a charm and I was totally pleased with my N95 8Gb but now I can't even do the most basic things due to this piece of junk that Nokia calls Nokia Music...

I have a similar problem (N95-1). All the songs i have (about 400+) will not show up. When i remove the memory card, all the songs on the phone shows up. Try this fix (I am using the latest firmware).
Navigate to the Home Media App (Main Menu>Tools>Connectivity>Home Media), Share Content: Select Options (Left Softkey), then refresh contents. It will take some time depending on the number of songs, videos and photos you have. After it has finished refreshing, you should be able to select any song from the phone or memory card from within the tones menu.

Need to select all equipments (PRT) for a plan (routing) operation (PLPO)

hi,
I need to select all assigned equipments (PRT) for a plan (routing) operation (PLPO).
Can anybody tell me the database table relation or is there a function module or a BAPI or something like this !?
Thanks
Olaf
Edited by: Olaf Krüger on Feb 20, 2008 12:03 PM: BADI to BAPI

I suppose you have every PLPO needed (else look at function module WOSTS_TASKLIST_READ_FROM_DB)
Then read
PLMZ Allocation of bill of material items to operations
STPO BOM item
SELECT * FROM plmz INTO TABLE t_plmz
    FOR ALL ENTRIES IN t_plpo
    WHERE plnty = t_plpo-plnty
      AND plnnr = t_plpo-plnnr
      AND plnkn = t_plpo-plnkn.
SELECT * FROM stpo INTO TABLE t_stpo
    FOR ALL ENTRIES IN t_plmz
    WHERE stlty = t_plmz-stlty
      AND stlnr = t_plmz-stlnr
      AND stlkn = t_plmz-stlkn.
Regards

Nokia N95 8GB and Windows 7 Home Premium Dutch

:robotmad:Ladies and readers, I have, including a Nokia N95 8GB the desktop is new and draaid on windows home premium en when I Vista had worked with the Nokia everything is perfect. Now that I do I get windows 7 have not been contract more Nokia N95 8GB through the desktop computer get the notification that the software is not good, but which I have already removed and again installed but there is also clear the need to install software that it is old windows and vista so there is not to WINDOWS 7 I will take place this is a major disaster for Nokia that, over time inspeeld on a real upgrade for the desktop so that there is also normal contact with the Nokia N95 8GB can be made. why it is not on the openingspagina of Nokia if it would have been! We are nevertheless service to clients and should do so we get a good appliance bought and not a WHICH CANNOT comuniseren with the computer since Microsoft now Windows 7 sells and what I am therefore in the original state I can install by an approved fitter. Therefore, I would like to see that Nokia a link sends so that I can make both wireless contact and the mobiletelefoon can facilitate upgrading and data can uitwissellen. Otherwise, this after 3 pieces my last Nokia. vetaling Babylon

Dude i think u just spoke french!
Sorry to say that i didnt get a word that you said.
I assume you have upgraded to windows 7 and are unable to use or install nokia pc suite.
First of all it aint nokia's fault that windows 7 came after they had uploaded the setup.
All you need to do is download the pc suite to you computer or laptop or whatever it is ... then right click on the setup and click compatibility mode nd just keep pressing next next next.
Im sure your pc suite will be installed then and you will be able to use your computer to transfer everything to and from the phone..
Have fun and lemme know if it worked.
Chances of workin = 101% because im on windows 7 aswell

I have the Jetpack 4GLTE, what is the Mbps download and upload speeds for this device?

I have the Jetpack 4GLTE, what is the Mbps download and upload speeds for this device?

The avgrage real speed will be more in the area of 25 to 38 Mbps You would need to be in a strong signal area with high grade cell tower service and low customer use to even reach 50 Mbps.
From Verizon page. Just be aware that using the MiFi 6620L can cost a lot of money. And you can thank the device's fast performance for that. In my testing around the San Francisco Bay Area, rathe device delivered blazing-fast download speeds that nged between around 10Mbps to around 40Mbps. At those speeds, you can burn through 4GB of data in just less than an hour. Once you reach the cap, of course, you'll have to pay somewhere between $10 to $15 for each additional gigabyte, depending on the plan you sign up for.
For more information follow link: Verizon Ellipsis Jetpack MHS800L | Verizon Wireless

Comparing 6110 N95 and N95 8Gb

Having decided I must have a 6110, I went into my local phone carrier store to sign up for a plan that included the 6110. I was introduced to the N95 as an alternative. On researching the N95 I discovered the N95 8 GB. I was also told the "turn by turn voice guided navigation" was included, however, many reviews state this a monthly subscription service - is this true?
I am now totally unsure what to buy. My most important criteria are the GPS and navigation functions, standard phone/contacts functions, email and MP3 playback. I dont really need video and other multimedia/comms stuff.
Any guidance would be appreciated

Hi,
After all said and done, I think that the map should be subscription free just like the 6110 navigator. If I need to use the phone outside australia I am happy to pay $60 for a map. But a better question is.... with Vodafone The monthly 10 or 15 dollars I pay for subscription on my N95 8GB actually turns out to be far more in cost than the most expensive UBD or Sydways I have ever seen, not to mention the the navigation software uses gps and thus you are now charge $5 a minute. Pretty expensive 40 min trip if you ask me or does this include free use of gprs.
I just see this a money grabbing scheme, we will give you the use of the inbuilt maps but not only will it cost you per month but also when you actually use it.
Its the same as the " $5 a minute and doesnt matter how much you download " comeon, on 1 minute the phone would be lucky to download 2mb, definately not a song from itunes or pay as you go web site, so now you paying 10 buck for downloading and 1 or 2 bucks for a song hehehehehhe, most expensive mp3 in the world. No wonder such places like p2p are going so strong, telco companies have thier hands very deep in our pockets.

Proper Plan for SAP Support Pack Upload

Hi Experts,
We are going for Support pack upload of SAP at your firm.
Like to get your suggestions on the Plan we have done for going with the update.
The Present Level of SAP in our server is very low 8 stacks low approx in both the Development Server and Production Server.
What is the best way to apply them from the below mentioned plan.
1. shall we go for 1 stack in Development for the required components then test it for 3-4 days then go for the same stack in Production. So that both the server go sync with each other. This way going till the target stack one by one.
2. shall we go and upload all 8 stacks for the components required in development first one by one and then test the system for all the errors available and then start with the Production. Will there be a transport problem if the system are not in sync for the so many days.
Please suggest which one shall be best suited if any other plan can be used for safe and proper update of Support pack.
Jitesh

Hi,
1. shall we go for 1 stack in Development for the required components then test it for 3-4 days
then go for the same stack in Production. So that both the server go sync with each other.
This way going till the target stack one by one.
If Large Support Stack gape is there, then
1. I would perform system copy of Existing Development System into another separate New Test Server.
2. Then , I will generate Side Effect Reports based on the Source-to-Target Support Stack gape. You can request such side effect from SMP at https://service.sap.com/side-effects by selecting the solution and by providing source to target SP level per component.
3.Refer The required SAP Notes regarding OCS Know problems for the support patches. Apply latest SPAM/SAINT Updates. Apply Latest SAP Kernel patches.
4. Apply the Required Support Package stack after taking successful offline backup of Database.
5. Perform SPDD - SPAU adjustment and record it in single/Multiple Change requests.
6. Ask the function team to check the Functionality in new Upgraded TEST system
7. After Confirmation from the Functional & Technical Team, Apply the same support package stack in existing real DEVELOPMENT system and move that SPAU-SPDD adjustment request.
2. shall we go and upload all 8 stacks for the components required in development first one by one
and then test the system for all the errors available and then start with the Production.
Will there be a transport problem if the system are not in sync for the so many days.
The same above steps will be applicable here also. Change Requests Transports are not recommended between the systems which are on different Support Patch Stacks. With the above mentioned steps your downtime as well as Development Holiday will be minimized.
Regards,
Bhavik G. Shroff

Plan route on PC and upload to N95 8GB

Similar Messages

Maybe you are looking for