Plan SD order in Week and Plan order in PP in day
Hi,
I have planed a SD order in weeks and in PP the plan oder ist in day. but in PP I always get a plan order on monday.
How can I customize it to choose the start day in PP.
Thanks
Dede
Hi RB,
As you may be aware Billing plan can be either periodic or milestone billing. Billing plan is a schedule of individual billing dates for a single line item in an order. This is used mostly in Service , Maintenance or projects.
If you want to bill a customer on a certain date for the specified quantities, I suppose you should use Scheduling Agreements to fulfill your requirement.
Regards
Raj
Similar Messages
-
Several plan orders for the same day
Hi SAP Experts,
In my company we have a requirement to produce the same finish material in two work centers, using different BOMs. This was achieved through production versions for production orders. Now we need to plan (Indipendent requirement & Plan orders )the material based on these two BOMs.
We enter the indipendent requirement in MD61. I have given the production version against the requirement (In schedule lines tab). However i am unable to give two different requirements for the same day in different production versions.
Then i tried using different planning versions and assigning the different production versions to different plan versions.
Although my indipendent requirements are taken in different production versions(As I can see in MD04). When i run MRP plan orders are raised as the total of the requirements and in only one production version.
Please, Can some one help me to find a method to raise different plan orders for the same day in different production versions???
regards,
MadhushikaDear All,
I tried quota arrangements as a solution for above mentioned problem. What i require is to devide the PIR for a particular day in to two equal parts in two different production versions so that two plan orders will raise in equal quantities for the same day in two different production versions.
With quota arrangement what i get is alternative plan oders in different versions in diffrent days.
For example If my PIR are
Day 1 = 1000
Day 2 = 1500
Day 3 = 500
Day 4 = 1000
what i get is
Day 1 = 1000 - prd ver1
Day 2 = 1500 - prd ver2
Day 3 = 500 - prd ver1
Day 4 = 1000 - prd ver2
What i want is
Day 1 = 500 -prd ver1
Day 1 = 500 -prd ver2
Day 2 = 750 -prd ver1
Day 2 = 750 -prd ver2
Day 3 = 250 -prd ver1
Day 3 = 250 -prd ver2
Day 4 = 500 -prd ver1
Day 4 = 500 -prd ver2
Hope its clear to you all.
Please advise me how to configure the system according to this reqirement.
Best regards,
Madhushika -
I was online earlier this week and liked the forms with submit buttons and the Adobe site directed me to upgrade to Adobe PRO XI in order to use forms so I bought five licenses. Just had it installed today and it is now asking me to sign up for forms Central in order to use this feature. What gives? The Adobe site gave me the impression that I would have this feature after purchasing the new upgrade. I would not have purchased the upgrade, let alone five of them had I know this. Am I missing something?
Acrobat XI comes with the Fromscentral AIR application and the ability to create PDF forms authored in Formscentral. To have more than the free (1 form with 50 responses) level account you need to sign up for a Formscentral subscription.
Andrew -
They sent me a serial number for a windows version of PS Elements when I ordered a mac version. The serial number doesn't work, not surprisingly, but they don' t seem to care. I have tried the chat line and have waited for almost a day with no response. What should I do?
Look here
Order product | Platform, language swap -
Single process order spanning over multiple days...
Hi All -
My scenario is as follows:
I have a semi FG C going into multiple FGs A and B.
Receipts for A and B create dependent requirements for C on different days of a week. It would always be 2 continous days, Monday-tues or Tue-Wed and so on.
My lot size period type is "Days - 1." So when I run PPDS heuristic, the system creates 2 planned orders to cover the 2 different dependent requirements since my period bucket is days - 1.
We would want only 1 planned order for semi FG C which spans over 2 days of the week. To achieve this, what I did is change the lot size period type to Week-1 ( with period factor 1) which would create a single process order on the last day of the week and have the scheduler move the order and align it with the receipt of the FIRST planned order( for A or B).
Is there anyway we can let the system do this for us? Again the requirements can be on Day 1-2,2-3,3-4,4-5 etc...but what we would like is based on when the multiple requirements are, the system create the planned order for C on the day of the requirement of the first receipt( be it A or B).
IF Dep Reqs are on day 2-3, the planned order for C is needed on day 2. If the dep reqs are on 4-5, the planned order for C should be on day 4.
Any inputs will be appreciated.
Also, is there any function in the DS planning board to "Merge" 2 orders?
VarunHi
Changing to weekly lot size is the best option. It seems your problem is that the process order should get over (end date) before the first requirement. In such a case, you should also maintain a rounding value/fixed lot size in material C. Then process order will be created before the order of A or B (The first of the two) starts. In product view it will show a surplus on the first day and it will get consumed on the next day when B is produced.
Another way is to avoid using period factor so that heuristic creates planned order before the requirement.
Hope this should solve.
Nitin -
I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box. But hours later, I am still getting a disk full error and all of the memory has disappeared. I have cleared my backup logs from Time Machine, checked the mail folder, cleaned out tons of photos and videos and it still keeps filling back up.
In checking the log files, here is the message repeated over and over....
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: CoreData: error: (21) I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file'
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: Core Data: annotation: -executeRequest: encountered exception = I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file' with userInfo = {
NSFilePath = "/Users/donjr/Library/Calendars/Calendar Cache";
NSSQLiteErrorDomain = 21;
Jul 4 07:18:14 Donald-Keele-Jrs-iMac-123.local cfprefsd[180]: CFPreferences: error creating file /Users/donjr/Library/Preferences/com.apple.iPhoto.plist.t3l894p: 28
Jul 4 07:18:30 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: [0x16697c0] |ISyncSession|Warning| com.microsoft.Entourage2008: transitioning to cancel - session cancelled by server: Client 'com.microsoft.Entourage2008' tried to start a session for the plan 45AD80C3-0D52-4CF2-8CBA-103564B6C47C and the plan no longer exists.
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Applications/Microsoft Office 2008/Office/Microsoft Sync Services.app/Contents/Resources/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Users/donjr/Library/Sync Services/Schemas/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: macx_swapoff SUCCESS
Jul 4 07:19:31 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Any ideas on what to do next?
I'm running and iMac 20-inch early 2009
Processor 2.66 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400 256 MB
Software OS X 10.8.4 (12E55)Step 1
Quit Calendar. Triple-click the line below to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
Step 2
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash as well:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal. -
Get number of month, week and date between 2 dates
Hi all,
Is it possible to display number of month, week and days between 2 dates? either by using only SQL query or through PL/SQL...
Input:
From date: 01-Oct-2010
To date: 19-Oct-2010
I want output as below (Assuming the week starts from Monday to Sunday in oracle).
01-Oct-2010 -- (Since this is in mid of the week)
02-Oct-2010 -- (Since this is in mid of the week)
03-Oct-2010 -- (Since this is in mid of the week)
40 -- (Oct 4 to Oct 10 falls in 40th week of the year)
41 -- (Oct 11 to Oct 17 falls in 41th week of the year)
18-Oct-2010 -- (Since this is in mid of the week)
19-Oct-2010 -- (Since this is in mid of the week)
Note: If there is one full month between the given date, then the month number should be displayed.
After the month, the remaining date comprised with one full week, then the week number of the year should
be displayed. After displaying the week, the remaining dates should be displayed as it is..
Appreciate your help..
Thanks.
Rajan.I suppose if it's just like a calendar type information you want then something like...
SQL> break on month skip 1
SQL> set linesize 200
SQL> set pagesize 2000
SQL> column month format a20
SQL> column week format a4
SQL> with req as (select '&Required_Year_YYYY' as yr from dual)
2 ,offset as (select case when to_char(trunc(to_date(yr,'YYYY'),'YYYY'),'IW') in ('52','53') then 1 else 0 end as offset from req
3 select lpad( Month, 20-(20-length(month))/2 ) month,
4 '('||week||')' as week, "Mo", "Tu", "We", "Th", "Fr", "Sa", "Su"
5 from (
6 select to_char(dt,'fmMonth YYYY') month,
7 case when to_char(dt, 'mm') = '12' and to_char(dt,'iw') = '01' and offset = 0 then '53'
8 when to_char(dt, 'mm') = '12' and to_char(dt,'iw') = '01' and offset = 1 then '54'
9 when to_char(dt, 'mm') = '01' and to_char(dt,'iw') in ('52','53') then '1'
10 else to_char(to_number(to_char(dt,'iw'))+offset) end as week,
11 max(decode(to_char(dt,'d'),'1',lpad(to_char(dt,'fmdd'),2))) "Mo",
12 max(decode(to_char(dt,'d'),'2',lpad(to_char(dt,'fmdd'),2))) "Tu",
13 max(decode(to_char(dt,'d'),'3',lpad(to_char(dt,'fmdd'),2))) "We",
14 max(decode(to_char(dt,'d'),'4',lpad(to_char(dt,'fmdd'),2))) "Th",
15 max(decode(to_char(dt,'d'),'5',lpad(to_char(dt,'fmdd'),2))) "Fr",
16 max(decode(to_char(dt,'d'),'6',lpad(to_char(dt,'fmdd'),2))) "Sa",
17 max(decode(to_char(dt,'d'),'7',lpad(to_char(dt,'fmdd'),2))) "Su"
18 from ( select trunc(to_date(req.yr,'YYYY'),'y')-1+rownum dt
19 from all_objects, req
20 where rownum <= add_months(trunc(to_date(req.yr,'YYYY'),'y'),12) - trunc(to_date(req.yr,'YYYY'),'y') )
21 ,offset
22 group by to_char(dt,'fmMonth YYYY'), case when to_char(dt, 'mm') = '12' and to_char(dt,'iw') = '01' and offset = 0 then '53'
23 when to_char(dt, 'mm') = '12' and to_char(dt,'iw') = '01' and offset = 1 then '54'
24 when to_char(dt, 'mm') = '01' and to_char(dt,'iw') in ('52','53') then '1'
25 else to_char(to_number(to_char(dt,'iw'))+offset) end
26 ) x
27 order by to_date( month, 'Month YYYY' ), to_number(x.week)
28 /
Enter value for required_year_yyyy: 2010
old 1: with req as (select '&Required_Year_YYYY' as yr from dual)
new 1: with req as (select '2010' as yr from dual)
MONTH WEEK Mo Tu We Th Fr Sa Su
January 2010 (1) 1 2 3
(2) 4 5 6 7 8 9 10
(3) 11 12 13 14 15 16 17
(4) 18 19 20 21 22 23 24
(5) 25 26 27 28 29 30 31
February 2010 (6) 1 2 3 4 5 6 7
(7) 8 9 10 11 12 13 14
(8) 15 16 17 18 19 20 21
(9) 22 23 24 25 26 27 28
March 2010 (10) 1 2 3 4 5 6 7
(11) 8 9 10 11 12 13 14
(12) 15 16 17 18 19 20 21
(13) 22 23 24 25 26 27 28
(14) 29 30 31
April 2010 (14) 1 2 3 4
(15) 5 6 7 8 9 10 11
(16) 12 13 14 15 16 17 18
(17) 19 20 21 22 23 24 25
(18) 26 27 28 29 30
May 2010 (18) 1 2
(19) 3 4 5 6 7 8 9
(20) 10 11 12 13 14 15 16
(21) 17 18 19 20 21 22 23
(22) 24 25 26 27 28 29 30
(23) 31
June 2010 (23) 1 2 3 4 5 6
(24) 7 8 9 10 11 12 13
(25) 14 15 16 17 18 19 20
(26) 21 22 23 24 25 26 27
(27) 28 29 30
July 2010 (27) 1 2 3 4
(28) 5 6 7 8 9 10 11
(29) 12 13 14 15 16 17 18
(30) 19 20 21 22 23 24 25
(31) 26 27 28 29 30 31
August 2010 (31) 1
(32) 2 3 4 5 6 7 8
(33) 9 10 11 12 13 14 15
(34) 16 17 18 19 20 21 22
(35) 23 24 25 26 27 28 29
(36) 30 31
September 2010 (36) 1 2 3 4 5
(37) 6 7 8 9 10 11 12
(38) 13 14 15 16 17 18 19
(39) 20 21 22 23 24 25 26
(40) 27 28 29 30
October 2010 (40) 1 2 3
(41) 4 5 6 7 8 9 10
(42) 11 12 13 14 15 16 17
(43) 18 19 20 21 22 23 24
(44) 25 26 27 28 29 30 31
November 2010 (45) 1 2 3 4 5 6 7
(46) 8 9 10 11 12 13 14
(47) 15 16 17 18 19 20 21
(48) 22 23 24 25 26 27 28
(49) 29 30
December 2010 (49) 1 2 3 4 5
(50) 6 7 8 9 10 11 12
(51) 13 14 15 16 17 18 19
(52) 20 21 22 23 24 25 26
(53) 27 28 29 30 31
61 rows selected.
SQL> -
My daughter is going to Canada for a week and i would like to know if it will cost extra for her to text and/or call someone in the United States?
http://businessportals.verizonwireless.com/international/traveling_to/North_America/Canada.html
69 cents a minute for calls, texts covered under an existing texting plan or the standard pay per text rate if you don't have one.
If you're traveling in Canada, contact Customer Service at 800-922-0204 from any landline phone.
Global Picture and Video Messages are billed at the same per-message rate as though they were sent from the U.S. Accordingly, you can send/receive Picture and Video Messages with customers of:
Verizon Wireless (domestic rates/bundles apply)
Other domestic carriers (domestic rates/bundles apply)
Canadian, Mexican and Puerto Rican carriers (domestic rates/bundles apply)
Select International carriers (global rates apply)
When sending or receiving there's an additional data transport charge billed at the destination's Data Pay per Use Rate multiplied by the size of the Picture or Video, which can vary greatly.
A data network is required to send picture or video outside the U.S. See the Data Roaming List for eligible destinations.
Attempts to send Pictures or Videos are charged, even if the delivery fails.
Text Messages sent or received while in Canada, Puerto Rico and the U.S. Virgin Islands are billed as though you were in the U.S.
Check out our Nationwide plus Canada plans if you frequently call or travel to Canada. -
iPhoto is not showing photos stored in albums in the last week, and when I add recent photos, they don't show, or show as black. What's happening ? I show an incompatible upgrade available for OSX Maveriks, which I have not yet installed.
What version of iPhoto are you using? Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
Default selection on current month, week and date
Hi,
We are on Dashboard 4.1 sp3 the same version as BI.
The dashboard report is using LiveOffice connection. We are now facing an issue with default selection on current month, week and date.
The dashboard report drilled down from month, to week, then to date. The dashboard feed -live office report is on month/week/date ascending order - becuase we have running average calcualtion on LO report, it seems have to be in ascending order to get the correnct runnning average.
I tried to on Insertion to change default seletion, it works on month, but it doesnt working on week and daily.
but when LO report is on ascending order, on dashboard column chart the default selection is not on the current month, week and date.
Is there a way to solve the issue. Could anyone please help.
Thanks,Hi Suman,
Thanks for the quick reply.
Do you mean I Enable sorting -by categrory labels on Behaviour - common tab.
Thanks, -
The daily, weekly, and monthly maintanence scripts
Hello All,
I have a power mac G4 Digital Audio at 733mhz, my question is why am I not seeing the automatic maintanence scripts coming on at 3am in the morning? I am usually up on my computer at those times, but still have yet to see the system go into automatic maintanence scripts at that time of the morning? Is there something wrong with my configuration file for the scripts, or is there something I need to do in order for it to work?
NadavHiya,
Just a quick check: have you looked in /var/log/daily.out to see if the daily jobs are outputting anything to the logs, or maybe that's what you're talking about? Nothing logged?
Um, if there's nothing in the log, then you may have a /etc/daily.local file overriding the default script in /etc/periodic/daily in someway. A quick check of /etc/periodic/daily/500.daily may prove helpful. It should be doing all it's normal log rotations and jazz... If the file looks normal (not corrupted or just blank say) maybe try putting a little command to write something to /var/log/daily.out to tell yourself it's working like (you'll need to sudo this):
echo "this is daily.out working like a champ"
or whatever. Same thing for the weekly and monthly scripts...
If you've done all this already and haven't looked yet, check out the manual pages for periodic, periodic.conf, cron, crontab, and so forth...maybe there's some goofy setting hosing things somewhere.
Hope that helps! -
How do you fix a iPod Touch 4G when you had it off for 2 weeks and charging it back faster.
How do you fix a iPod Touch 4G when you had it off for 2 weeks and charging it back faster?
After charging overnight
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i am unable to find icloud in my system preferences. What do i do? I don't have time to get to apple until next week and now im going to lose a bunch of data bc i can't update my icloud starage.
You say you have iOS6: you can perfectly well pay to extend your free storage as an ex-MobileMe subscriber.
If you wish to continue your current storage level, the instructions are here:
http://support.apple.com/kb/HT5527
Scroll down to 'How do I purchase my current plan?' and expand the section applicable to iOS. -
MacBook slow wakeup, black screen, Mavericks, took to Genius bar, worked OK for about a week and now the same.
Screen actually seems a very dark navy blue almost black. sometimes can see cursor in white
Only happens sometimesIf you can somehow document any processes you've put the MacBook
through, which can cause it to repeat the symptoms you've seen, be
sure to write down the sequence of events if your action and resulting
issues can be make re-occur. Then you'd have a fair chance at some
one looking deeper to find the real cause of this problem. {If you have
a digital camera handy, you can take a picture of the screen if it should
display some curious content other than a black screen, such as that
seen in a kernel panic or other message. Otherwise, a working Mac
can take its own screenshot.}
The computer should be returned to the Apple Store genius bar for
further evaluation & more in-depth diagnostic tests of long duration.
Sometimes a test may not run any of the additional software, together
or separately, that you may be accustomed to using. Perhaps the basic
OS X and a few applications work just fine.
If the issue is due to a conflict in software and not a hardware failure,
the cause may be harder to discover. If you have a complete backup
of the system and your files on an external drive, that may help if you
need to reinstall it. However if there is a problem in that software set
a new installation without conflicting software may be required in order
to troubleshoot the machine.
How old is the computer, how much RAM installed, how large a hard
disk drive and what is the remaining unused capacity of that drive?
(The HDD capacity will show 'other' so that may be unsubstantiated.)
Are there any indications in Activity Monitor, or in the system log files
from Console, to show crash logs or other effects from the Time/Date
of these slow wakeup and black-screen intervals? There may be.
Some of the system report may be helpful to those who know how to
read the resulting mass of files. Perhaps one of the more advanced
users who occasionally reply here will see your thread and offer a
method of accessing the OS X via Terminal or single user mode,
for troubleshooting purposes. Mine is an older OS X with less fuss.
Good luck & happy computing!
edited -
My iPhoto doesnt allow me to place more photos, says that the space is full but my mac book pro is new (less than 2 weeks) and I only got 500 photos, what should I do?? the computer is almost empty
Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT
Maybe you are looking for
-
I need help with the sync and the new update.
I have had 3 new updates recently. I'm now into iTunes 8.1-8.6 or something. I've got two problems that I can't find answers for in the help. First off, The new iTunes is pink with a black side-bar. I was wondering if there is a way to change it back
-
Why throw exception when input Chinese in JTextField for Applet
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException at java.util.Hashtable.get(Unknown Source) at javax.swing.KeyboardManager.registerMenuBar(Unknown Source) at javax.swing.JMenuBar.addNotify(Unknown Source) at java.awt.Container.ad
-
Hi Gurus, Please help me on the following issue. "When you do a final delivery in SRM and zero out the quantity to close the PR short, this does not transfer over to ECC. Basically, the final delivery indicator is set in ECC, but the system will sti
-
Itunes error message on Windows 8 system (PLEASE HELP!!)
I am unable to install itunes on my new HP computer with windows 8? Each time i try and install it an error message pops up ""The windows installer service could not be accessed. This can occur if you are running windows in safe mode, or if the windo
-
Internal Software Error occured in MIG
PC起動直後.CreateTaskを実行した時に[Rc:-229665(Internal Software Error Occured in MIG software. Please contact National Instruments Support.) が発生します.これはどの様な場合に起きるのでしょうか.原因と対策を教えて下さい.宜しくお願いします.また.環境は以下の通りです. OS:WinXP SP2(日本語) DaqMx:8.6