Plan to Migration from Collab 9.0.4 to 10.1.2 and include Oracle Workflow

We are running Linux AS RedHat 3, and collaboration suite 9.0.4:
We have 3 servers - one for storage, one for midtier and one for infrastructure.
The midtier has Oracle Mail and Calendar running. In addition, it has Oracle Files configured but not being used.
We plan to upgrade to 10.1.2. But we plan to implement Oracle Files (Content services) with Oracle Workflow.
What is the upgrade path? Should I install and configure Oracle Workflow in version 9.0.4 first and then upgrade to 10.1.2 ? or can I install and configure Oracle Workflow in 10.1.2 afterwards?

You could do both, as workflow can be installed separately but I would advise to look into BPEL in order to substitue workflow. Have a look at http://www.oracle.com/technology/products/cs/developer/contentservicesdev/contenservicesdevkit.html
cu
Andreas

Similar Messages

Planning a migration from Exchange 2010 to Exchange 2013

Hello,
I am planning a migration from Exchange 2010 to Exchange 2013 and I was wondering if there was a good guide on the UM migration. I haven't found one that isn't confusing as heck.

Hello,
Is there any update?
If
you have any feedback on our support, please click here
Cara Chen
TechNet Community Support

Migration from WD Java to WD ABAP in ESS Trips and Expenses

Hello Experts,
We are migrated ESS Trips and expenses from WD Java to WD ABAP.
Following steps I have performed
1.     Activated FIN_TRAVEL_1 and FIN_TRAVEL_2 business functions.
2.     checked FITV_TRIP_FORM service in SICF /sap/bc/webdynpro/sap its active .
3.     Currently we are SAP ESS 6.0 EHP 4 , and accordingly we have down loaded
uwl_com.sap.pct.erp.mss.tra.14.zip , (for SAP ECC 6.0, Enhancement Package 4) [Note 1076144 - ESS trips and   expenses: Migration from WD Java to WD ABAP]
file as suggested in Migration from WD Java to WD ABAP in ESS Trips and Expenses user guide
4.     after uploading uwl_com.sap.pct.erp.mss.tra.14.zip file in SAP NetWeaver Portal -> System Administration -> System Configuration -> Universal Worklist->& Workflow -> Universal Worklist Administration.-> Object Types and View Definitions -> com.sap.pct.erp.mss.tra.
5.     after uploading file, when manager click up on u201Ccheck trip of ABCu201D workitem in his uwl , he is getting following error.
404   Not Found
SAP J2EE Engine/7.01
The requested resource does not exist.
Details:   Go to main page of this application!
Any idea for fixing this issue.

hi
in the java system , the portal will launch the approval frm the same system , for the abap component , the task type in uwl you might have to define a dynamic property as "System" and give the name of your r/3 system in there.
Try it
Regards
sameer

Plans for migration from JDev 10 to JDev 11

Hi
I just review online demos for JDeveloper 11, and I have a question about future migration path. In our company we now create applcaions in 10.1.3 version - (jsp not jspx pages - maybe it is mistake ?). It will be possible in future to migrate our ADF Faces applicattons to 11 version. Graphs and tamplates in new version are very impressive :)
Kuba

Hi,
you can upgrade applications from 10.1.3 to JDeveloper 11. However, this will take your application and run it as it is just using the newer components. So upwards compatibility is a primary goal.
However, we don't think we can automate the upgrade of an ADF Faces application of today to e.g. an ADF Faces Rich Client Framework application because of the changed lifecycle.
Its too early yet to say what will be possible and what isn't.
Frank

Migrate from WD Java to WD ABAP in ESS Trips and Expenses

Hi
I got request to migrate from from Java to ABAP fof ESS trips and expenses. Could someone please give me a link to the documentation or any existing blogs?
thanks

bump...

Migrating from WebLogic v8.1.3 to v10.3: Datasources and Connection Pools

I took the liberty to migrate my OLD BEA WebLogic v8.1.3 domain (i.e. sample) to Oracle WebLogic v10.3. Everything appears to run smoothly BUT when I try to connect to the Hypersonic Database I had from the OLD environment, I get connection errors (i.e. weblogic.common.ResourceException). I can see from the NEW 10.3 environment that the migration utility creates two (2) datasources (sampleDS and samplePool). However, when clicking through the screens, I do not see how sampleDS refers to the samplePool out of the box from the migration utility. When I start the WebLogic domain with startWebLogic.cmd...here is the code to launch the actual DB instance:
cd hsqldb
start "Sample DB (HSQLDB)" %JAVA_HOME%\bin\java -classpath hsqldb.jar -Xms32m -Xmx128m org.hsqldb.Server -database sampleDB -port 15553 -silent false -trace false
cd ..
This works quite well and launches a window that has the following:
| Sample DB (HSQLDB)
| server.properties not found, using command line or default properties
| Opening database: sampleDB
| server.port =15553
| server.database =sampleDB
| server.silent =false
| HSQLDB server 1.7.1 is running
| Use SHUTDOWN to close normally, Use [CTRL] + [C] to abort abruptly
| Wed Jun 16 10:18:48 EDT 2010 Listening for connections ...
|_________________________________________________________
This is the right screen and confirms my database is up and running and waiting for connections. Somehow, when I migrated from 8.1 to 10.3 something is not configured correctly and my sampleDS is not properly leveraging the samplePool. Can anyone shed any light on this problem?
I have went through most of the posts and can not seem to understand what happens to the DS and Pools during the migration and specifically how do I reconnect the two to ensure that I can connect to the database. The app is up and running fine in WebLogic v10.3 but without the dB connection, I am stuck at the login screen.
Thanks for any help...

I took the liberty to migrate my OLD BEA WebLogic v8.1.3 domain (i.e. sample) to Oracle WebLogic v10.3. Everything appears to run smoothly BUT when I try to connect to the Hypersonic Database I had from the OLD environment, I get connection errors (i.e. weblogic.common.ResourceException). I can see from the NEW 10.3 environment that the migration utility creates two (2) datasources (sampleDS and samplePool). However, when clicking through the screens, I do not see how sampleDS refers to the samplePool out of the box from the migration utility. When I start the WebLogic domain with startWebLogic.cmd...here is the code to launch the actual DB instance:
cd hsqldb
start "Sample DB (HSQLDB)" %JAVA_HOME%\bin\java -classpath hsqldb.jar -Xms32m -Xmx128m org.hsqldb.Server -database sampleDB -port 15553 -silent false -trace false
cd ..
This works quite well and launches a window that has the following:
| Sample DB (HSQLDB)
| server.properties not found, using command line or default properties
| Opening database: sampleDB
| server.port =15553
| server.database =sampleDB
| server.silent =false
| HSQLDB server 1.7.1 is running
| Use SHUTDOWN to close normally, Use [CTRL] + [C] to abort abruptly
| Wed Jun 16 10:18:48 EDT 2010 Listening for connections ...
|_________________________________________________________
This is the right screen and confirms my database is up and running and waiting for connections. Somehow, when I migrated from 8.1 to 10.3 something is not configured correctly and my sampleDS is not properly leveraging the samplePool. Can anyone shed any light on this problem?
I have went through most of the posts and can not seem to understand what happens to the DS and Pools during the migration and specifically how do I reconnect the two to ensure that I can connect to the database. The app is up and running fine in WebLogic v10.3 but without the dB connection, I am stuck at the login screen.
Thanks for any help...

Linux Mint 17, migrated from Win7: Verify that you have enough disk space, and that you have write privileges to the file system, then try again.

I get this error message (The messages could not be filtered to folder 'Generic Folder' because writing to folder failed. Verify that you have enough disk space, and that you have write privileges to the file system, then try again.) popping up on many, though not all of my incoming filters. I recently migrated from a Windows 7 installation to a Linux Mint 17 system.

I did give it time to run through everything when I initially migrated, and it frequently will sit open for 3 to 4 hours while I'm working on other projects.
The 'Generic Folder' represents sorting folders in my main mail account in Thunderbird. For example, my mail which is listed to filter into my 'Amazon' folder is sorted there with no problem, while any mail designated to be filtered into my 'Games' folder prompts the above error massage.

Migrating from PSE for Windows 6 to PSE for Mac 6 including metadata

Can't find anything in the knowledge base on this.
I am giving up on Windows. Its just too messy and ugly. One of the final changes will be migrating from MS Windows Vista and PSE 6 to a brand new Mac, using LEopard 10.5.2 and PSE for Mac 6.
I want to migrate my images from the Windows machine, as well as the metadata organizing information. Surely I am not the only one with this need. I know I can save the mages in a mutually readable file format, export, and have them on the Mac, but I have a great deal of metatdata and image organization in the Windows version of PSE 6.
Please tell me how to migrate the entirety of PSE for Windows to my new Mac.
Thanks.....

Some related questions-- can Bridge CS3 search sub-folders? Could I filter for a Keyword at the top of a tree, and locate all files with that keyword in sub-folders?
While exporting files from PSA2 on a PC I am using Share / Email to attach my existing keywords. Can they be drag-and-drop added to a Hierarchy in the Keywords panel? (Either from the Filter panel where they are automatically listed and counted, or from the "Other" location in the Keywords panel where they appear italicized?)
I had deluded myself into believing that PSE6 for the Mac included Organizer. Would Lightroom be a logical option for organizing? Particularly if I want to catalog many images on CD without storing them on disk? Can it be purchased separately? What other options would you recommend?

Essbase and planning applications migration from 11.1.2.1 to 11.1.2.4

Hi Masters,
I have few Hyperion 11.1.2.1 running servers for Essbase and planning applications (Essbase alone applications and planning applications are running into different servers). Now we are planning to upgrade 11.1.2.1 directly to new 11.1.2.4 servers.
could you guys please suggest me the best way of migrating these applications to 11.1.2.4?
Thanks a lot,
Siva

Hi John,
Actually we are moving all our existing servers to some new data center. the plan is like installing 124 in the new server in the new data center and migrate the existing 121 applications to the 124 servers.
So is there a best way to migrate like i said above? or do we need to install 121 in the new server 1st and migrate the applications from existing 121 servers, then apply maintenance release of 124 would be best way?
Thanks,
siva

Cannot logon to Planning after Migration from V3.5.1 to V9.3.1

I am upgrading Planning v 3.5.1 to Planning v9.3.1, the datasource and repository is sqlserver2000.
Below is the Quick overview
1Create a new database for your planning application
2Create a datasource to the database
3Create a fresh planning application make sure the admin is the same name as your old sourceplanning app
4If the application owner is not the hyperion default admin account then Go into the database tables for the planning app and look at table HSP_USERS, store the SID value against user 50001
5Stop Planning
6Restore the sourceplanning application database over the one created in the first step
7Go into the HSP_USERS table and update the SID for user id 50001 if you had to store the SID before
8Start planning
9logon to the Planning
When I logon to the Planning there will be the error below:
Unsuccessful logon. Check log for details.
Below is the Planning server log:
Jun 23, 2010 4:46:36 PM org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/32 config=null
Jun 23, 2010 4:46:36 PM org.apache.catalina.startup.Catalina start
INFO: Server startup in 7234 ms
Query Failed: SQL_GET_SYSTEMCFG: null
java.sql.SQLException: [Hyperion][SQLServer JDBC Driver][SQLServer]Invalid objec
t name 'HSP_SYSTEMCFG'.
at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
at hyperion.jdbc.base.BaseExceptions.getException(Unknown Source)
at hyperion.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown Sour
ce)
at hyperion.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown Sour
ce)
at hyperion.jdbc.sqlserver.tds.TDSRPCRequest.processReplyToken(Unknown S
ource)
at hyperion.jdbc.sqlserver.tds.TDSRequest.processReply(Unknown Source)
at hyperion.jdbc.sqlserver.SQLServerImplStatement.getNextResultType(Unkn
own Source)
at hyperion.jdbc.base.BaseStatement.commonTransitionToState(Unknown Sour
ce)
Can anyone give me some advice, thanks a lot!
Edited by: Handy_han on Jun 23, 2010 1:51 AM

What I can tell is what happens in the background when it migrates, it runs SQL from version to version, the SQL is in <hyperionhome>\Planning\config\sql
It also updates the version and release in table HSP_SYSTEMCFG
So from 3.5.1 to 9.3.1 it would run
migSQLDB4_0.sql
migSQLDB4_0_1.sql
migSQLDB4_1.sql
migSQLDB4_2.sql
4_1_1Migration_SQLServer.sql
9_3_0Migration_SQLServer.sql
9_3_1Migration_SQLServer.sql
In HSP_SYSTEMCFG
set Version to 9
Release to 31
In the Planning System database, table HSPSYS_APPLICATION, set version to HP-9.3.1
Then it would do the equivalent of a restart of the planning service by clearing the cache.
Cheers
John
http://john-goodwin.blogspot.com/

Migration from NWDI 6.40 to NWDS Only 7.0 and SVN

Hi,
I am Migrating our source code for an update from EP 6.0 to EP 7.0
I have some projects residing in a subversion repository some projects beeing "maintained" in NWDI.
At the moment I am trying to move the projects from NWDI to subversion.
I struggle with:
- changes to the referenced libraries. For some DCs i simply can change the classpath and I can do a Quick Par Upload built with the EP 7 / NW 2004s libraries (good but not shure if this is the way to go). For other DCs, for e.g. when the result is a sda file - the classpath when using DevelopmentComponent -> Build is overwritten with the DC libs which I guess are all from NW 2004.
- So I decided to create a new project in JDI without DC an migrate the sources by hand for SDA files but I got in trouble when creating a Webservice for what to me looks like a PortalApplication Project (Created a PortalApplication Project added the Java Classes and tried to add an Webservice)
So, can you give me some guidance how to succeed in this migration?
At the moment I don't want another NWDI 7.0 installed as I am the only developer in this project at the moment and it seems to heavy for this and we already have most of our sources in subversion already.
Regards and thanks in advance!
Eckbert

Hello Eckbert
I see that you have not been able to find a solution for this.
Can you provide some more information which may help the other SDN posters to assist you?
Thanks
Kenny
Moderator

Can't send emails after migration from Vista PC to W7 PC. Tried Mozbackup and Windows Easy Transfer. Settings have transferred ok, it just won't send emails.

I recently migrated my Tbird from a Vista PC to a W7 PC using Mozbackup. Transfer was fine with all the settings transferred apparently correctly. But now I can receive emails but not send them. Sent emails show in 'Sent Items' but are not received the other end. Also tried the migration using the Beta 1 version of Mozbackup and also Windows Easy Transfer with the same result. IMAP and POP3 accounts are both affected. Neither can send emails. I get no error messages nor any bounceback.
Found on one forum that AVG can block outgoing emails so altered the AVG settings which seemed to solve the problem. The next morning the problem was back. I uninstalled AVG completely but it made no difference. I do have MicroSoft Sec Essentials but the problem was there before that was installed.
Using the BT Home Hub 5 on BT Infinity broadband. It can't be the router though as the old PC was sending emails fine. Although I did have the suspect AVG settings, removing it has not solved the problem.
The outgoing email settings seem to be fine. Any thoughts?
Simon

Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]

Cross Forest Migration from Exchange 2007 to Exchange 2013

Hi
Could anybody advice me the steps also the pros and cons for below mentioned environment if we are going for the cross forest migration.
Source
Domain - test.local
Active Directory - Windows 2003
Exchange Server - 2007
Target
Domain - test.net
Active Directory - Windows 2012
Exchange Server - 2013
Also if it is possible ,
How could I remove the source environment including the exchange servers. after the migration ?
Regards
Muralee

Hi Oliver ,
Please suggest us.
In my environment we are in a plan to migrate from exchange 2007 to exchange 2013 (cross forest migration).
Source : Exchange 2007 with sp3 ru 10
Target : Exchange 2013 with cu2 ( new environment yet to be created).
Trust : Forest trust in place (two way )
Domain and forest functional level : 2003 in both target and source
Migration Steps :
Step1 :
We are in a plan to execute 'preparemoverequest.ps1' first in the target forest ,so that we will get the disable MEU
in the target forest.
Step2:
Then we are going to use ADMT to migrate users SID'S and password .
Step3:
Then we are going to move the mailboxes with New-moverequest
Please have a look in to our steps and suggest us ,whether we are going to proceed the migration in a right way or not
.Is anything needs to be changed please intimate me .
Thanks
S.Nithyanandham
Hey there,
Sorry for taking a little while to get back to you, i've been busy working on Hosted Lync deployments!
Use ADMT first, then when using preparemoverequest.ps1 script using the -uselocalobject cmdlet. This will then tie it up to the ADMT migrated account.
More info in this thread here: http://social.technet.microsoft.com/Forums/windowsserver/en-US/2916e931-36a0-4ba4-8c04-196dbe792b44/preparemoverequestps1-and-admt?forum=winserverMigration
Oliver
Oliver Moazzezi | Exchange MVP, MCSA:M, MCITP:Exchange 2010,MCITP:Exchange 2013, BA (Hons) Anim | http://www.exchange2010.com | http://www.cobweb.com | http://twitter.com/OliverMoazzezi

Unable To Sync After Migrating From Win XP(32 bit) to Win 7(64bit)

I received a new PC, dual core platform, for XMAS. However, I received a Com 1 port failure when performing a Hot Synch to upload my PD(,M500) data to Palm Desktop on the new PC. Palm tech support said there is no USB driver available for the 64 bit OS. Does anyone have a 3rd party USB driver, or any other suggestions to allow me to do a Hot Synch on my new PC.
Thx,
Ed
Post relates to: Palm m500

Originally Posted by mystico2
Hello, i just migrated from windows xp 32 bit because my hd crashed, and installed a new 1 tb hd, with win 7 64 bit, i installed my sb audigy 2 zs sound card, and everything works great, videos, music etc, i have my 5.1 working fine, but if i use flightsim fs2004, the only game i use, the sound doesnt work, it does strange thinks like sound inside the cockpit but no outside and viceversa in some planes, ..it only works fine in my 2 channel default old sound card, i downloaded the drivers that in creative page say are for win 7, but the same happened...
any help?
Try to use Windows XP SP2/3 compatibility mode first, see if it works for you. And use Alchemy for the Audigy 2 ZS, FS2004 is making use of Directsound after all. Read the guide for using Alchemy here and here. Download Creative Alchemy here.
Hope it works for you!

Beginner - Migrating from 10.4.11 to Snow Leopard

We currently have a G5 Mac Pro running 10.4.11. We just purchased a new Mac Mini Server and are planning on getting it set-up next week during the quiet holiday week.
We were planning on migrating, but I have been reading some horror stories. And being a server newbie, they are scaring me a bit. Our original server was set-up by an outside guy, before I was even working here. But I'm a lifelong Mac user and have a pretty good understanding of everything - so I'm not too worried about getting it going.
Our server is used for a few basic things:
A filer server for all the other computers on the network (some mac and some windows)
Email server
And some light VPN - which we hope to use more of with the new server
But that's about it, really.
The stories I've been reading is that email is a hassle to migrate over. Is this the case? Would we be better to set up the server brand new, and then just transfer over the files from the Mac Pro? The thing only has a 75 GB hard drive (which is almost full) - so really not too much to transfer.
Or would it be best to migrate the settings over?
Thanks in advance for your help!

Hi
Perhaps you should read this first?
http://manuals.info.apple.com/enUS/Migrationv10.6.pdf
There are two Chapters that deal with the questions you're asking. It is possible to migrate and update the mail database from 10.4 (cyrus) to 10.6 (dovecot). Just make sure you have a valid and current backup as well as fall back position in case it all goes wrong.
Another way to approach this is setup the new server properly. IMO don't use the Server Setup Assistant but it's your server and you do what you want. Whatever you decide create desired user accounts. If the 10.4 Server is an OD Master don't import them. Create from scratch or create a plaintext file with the relevant information keyed in and import that instead. Get DNS fully functioning and resolving correctly first. Enable and start the Mail Service. Configure it appropriately. Enable IMAP for your users. Instruct users to create another IMAP Account for the new mail server. They can transfer over everything from the old account to the new one. Recreating their folder and mail structure as they please. Whilst this is going on Mail can still be handled by the old server. At some point you will have to make appropriate changes in your firewall to redirect mail to the new server. At that point de-commission the old server. There's always a possibility of some mail loss but if you 'time' things correctly I'd be surprised if there was. If you base everything around DNS (which you should be do anyway) and reference the mail server by its name then the different IP addresses of the Servers should not make any difference.
My 2p.
Tony

Plan to Migration from Collab 9.0.4 to 10.1.2 and include Oracle Workflow

Similar Messages

Maybe you are looking for