Plan values not being displayed in the report ..

Hi All,
I have a query on query.. .
which displays actual and plan values , but the report is not showing the plan values
tell me how to do this
Sruthi

Sruthi,
Basically how do you store the data in the transaction cube's ?
How does the data differs b/w Plan and actual for the same KF ?
It stores depending on the Version...
Restrict the KF to a perticular version ...
Then you can get the desired...
Check the LISTCUBE with different versions..
Cheer's
HVR.

Similar Messages

Udf Data is not being displayed in the report

Hi all,
i have designed one report in which i am displaying some udf fields along with other system fields.
i have not used any selection criteria.
when i run report it doesn't display udf data of some random rows in the report even if data is peresent in that udf field.
If i open sales order and press 'Shift-F2' and update the document and now if i run report then i get that udf value in the report.
why this happening. data is there in the udf field only its not displayed in the report with out updating the that udf.
pls suggest some solution.
regsrds,
Chetan.

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Fieldname in not being displayed in the table maintenance

Hi Experts,
I have created a table maintenance for a custom table.The table contains 10 fields out of which first 3 are key fields.
on the 3rd key field i have supplied F4 help so as to populate the 4th field automatically based on the selection of 3rd field.
everything is working fine but last 6 'fieldname' is not being displayed on the column bar.instead of fieldname there is '+' sign on the column. And i have checked in layout(screen) also only first four fields being displayed.
plz help.
Thanks n Regards,
Mukesh

Hello Mukesh,
As you know, data element or pre-defined data type will be assigned as field type to the fields in a table. If you are assigning the data element, then the data element has the option to give the field label.
If you are assigning the data element and the field label is empty, then + sign will come. In other case - if you assigning the pre-defined data type also, the screeen column header will be shown as + sign.
In both the above cases, you can change the column header manually in the layout.
Regards,
Selva K.

All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?

All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?
With iOS 6, the all day events showed up in the notification centre but it lacks in the upgrade iOS 7.

Same problem here. Some people pointed out that all-day events do show up in their notification center, but that seems only to be the case for birthdays (and only as text like the weather). I've tried it myself on my iPhone and iPad and it did work for birthdays but not for any other all-day events. I already sent this to Apple as a product feedback as well, as should everyone of you. The more people mention it, the faster Apple's going to fix this issue. In its current state, notification center is not a very helpful feature in my opinion. There's absolutely no point in not showing all-day events in the 'today' calendar overview.
Here's a link to the product feedback page: http://www.apple.com/feedback/
I posted my message in the iPhone section since I couldn't find a page specifically dedicated to iOS 7.
I really love the look & feel of iOS 7 but it's kinda sad to see notification center not tapping its full potential.
Cheers!

Materialized view not being used in the report

I have had a materialized view (MV) for a particular report. Recently, the report definition has changed little bit, so the existing MV is not being used by the report anymore. I copied the code Discoverer's SQL Inspection and recreated the materialized view. But still it is not working. Obviously, I am missing something at the database level. Does anyone have any idea? The database is 9i and Discoverer is 9.0.2. Thank you!

The SQL that you see from the Inspect SQL option will provide you with the SQL that Discoverer sends to the database. The database then may do a query rewrite to point to an available materialized view if available. This rewrite won't be seen from the inspect sql option. You need to check at the database level to verify if a query rewrite did in fact take place.
You may want to check the section titled "Query Rewrite with Materialized Views" from Ch1 - "Introduction to the Optimizer" in the Oracle9i Database Performance Tuning Guide and Reference, Release 2 (9.2), Part Number A96533-02, available at http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96533/optimops.htm#37287
Regards
Abhinav Agarwal
Oracle Business Intelligence Product Management
http://www.oracle.com/bi
http://www.oracle.com/technology/documentation/bi_ee.html
http://www.oracle.com/technology/software/products/ias/htdocs/101320bi.html
http://oraclebi.blogspot.com/

Where clause is not being passed to the report

I just upgraded my crystal reports from 10.0 to 11 R2. Reports were working fine in 10.0 version,
Reports are called from vb.net (vissual studio 2005). When I was running this reports using crystal 10.0 and visual studio 2005, it was working fine, After the upgrade report runs but I am noticing that where clause is not being passed to the reports.It generates report as there is no where clause and produces multiple pages report.

I believe you are encountering an issue documented in [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Ludek

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Inspection Characteristic is not being displayed in the inspection lot

I have created a Calibration order by first creating method, then a MIC, same is attached to a task list and then a Plan.
But when i trigger a order for that task list the inspection characteristics as mentioned in the task list does not appear in the order.
Please let me know how to get the inspection characteristics in the order.
I have checked the task list, in that the Inspection characteristics is visible.
Please help
Praneet

I have noted one thing, in inspection lot the sample size is shown as zero for the equipment where the inspection characteristic is not being displayed and it is shown as one for the lot where the inspection characteristic is displayed.
Both the Inspection lot the task list is same
Please reply

Control-break statements:value not being displayed.

Hi all,
Iam using the control break statement at end of ..., sum.
value is not being displayed,instead it is showing *********.
even in the debugging mode the value is not being displayed.
iam passing the values into a temp IT,but still the values are not being dispalyed.
here is the following snippet of code.
what could be the mistake?
Please give me the suitable answer.
Thanks in advance.
LOOP AT FT_ITAB INTO FT_WA.
    FTY_WA-EBELN = FT_WA-EBELN.
    FTY_WA-EBELP = FT_WA-EBELP.
    FTY_WA-NAME1 = FT_WA-NAME1.
    FTY_WA-ZTERM = FT_WA-ZTERM.
    FTY_WA-INCO1 = FT_WA-INCO1.
    FTY_WA-WAERS = FT_WA-WAERS.
    FTY_WA-SUBMI = FT_WA-SUBMI.
AT END OF EBELN.
    SUM.
    FTY_WA-BRTWR = FT_WA-BRTWR.
    FTY_WA-KTMNG = FT_WA-KTMNG.
    FTY_WA-NETPR = FT_WA-NETPR.
   APPEND FTY_WA TO FTY_ITAB.
   CLEAR FTY_WA.
ENDAT.

Abhi,
i tried as you said values are being diplayed,but they are not gettin totaled,i want the sum of values at the end of line item,I need to pass these valuse to alv.
here is the complete code.Please tell me how should I proceed.
TABLES:EKKO,EKPO,LFA1.
TYPE-POOLS:SLIS.
DATA:HEADER TYPE SLIS_T_FIELDCAT_ALV,
     WA TYPE SLIS_FIELDCAT_ALV,
     LAYOUT TYPE SLIS_LAYOUT_ALV.
TYPES:BEGIN OF PH_TY,
        PH_EBELN LIKE EKKO-EBELN,
        PH_AEDAT LIKE EKKO-AEDAT,
        PH_LIFNR LIKE EKKO-LIFNR,
        PH_ZTERM LIKE EKKO-ZTERM,
        PH_EKORG LIKE EKKO-EKORG,
        PH_WAERS LIKE EKKO-WAERS,
        PH_SUBMI LIKE EKKO-SUBMI,
        PH_INCO1 LIKE EKKO-INCO1,
        PO_EBELN LIKE EKPO-EBELN,
        PO_EBELP LIKE EKPO-EBELP,
        PO_BRTWR LIKE EKPO-BRTWR,
        PO_KTMNG LIKE EKPO-KTMNG,
        PO_NETPR LIKE EKPO-NETPR,
      END OF PH_TY.
TYPES:BEGIN OF PO_TY,
        PO_EBELN LIKE EKPO-EBELN,
        PO_EBELP LIKE EKPO-EBELP,
        PO_BRTWR LIKE EKPO-BRTWR,
        PO_KTMNG LIKE EKPO-KTMNG,
        PO_NETPR LIKE EKPO-NETPR,
      END OF PO_TY.
TYPES:BEGIN OF VO_TY,
         VO_LIFNR LIKE LFA1-LIFNR,
         VO_NAME1 LIKE LFA1-LIFNR,
      END OF VO_TY.
TYPES:BEGIN OF FI_TY,
         EBELN LIKE EKKO-EBELN,
       AEDAT LIKE EKKO-AEDAT,
       LIFNR LIKE EKKO-LIFNR,
         ZTERM LIKE EKKO-ZTERM,
       EKORG LIKE EKKO-EKORG,
         WAERS LIKE EKKO-WAERS,
         SUBMI LIKE EKKO-SUBMI,
         INCO1 LIKE EKKO-INCO1,
       EBELN_I LIKE EKPO-EBELN,
         EBELP   LIKE EKPO-EBELP,
         NAME1 LIKE LFA1-LIFNR,
         BRTWR LIKE EKPO-EBELN,
         KTMNG LIKE EKPO-EBELN,
         NETPR LIKE EKPO-EBELN,
       LIFNR1 LIKE LFA1-LIFNR,
      END OF FI_TY.
TYPES:BEGIN OF FT_TY,
         EBELN LIKE EKKO-EBELN,
         ZTERM LIKE EKKO-ZTERM,
         WAERS LIKE EKKO-WAERS,
         SUBMI LIKE EKKO-SUBMI,
         INCO1 LIKE EKKO-INCO1,
         EBELP LIKE EKPO-EBELP,
         NAME1 LIKE LFA1-LIFNR,
         BRTWR LIKE EKPO-EBELN,
         KTMNG LIKE EKPO-EBELN,
         NETPR LIKE EKPO-EBELN,
      END OF FT_TY.
DATA: PH_ITAB TYPE STANDARD TABLE OF PH_TY,
      PO_ITAB TYPE STANDARD TABLE OF PO_TY,
      VO_ITAB TYPE STANDARD TABLE OF VO_TY,
      FI_ITAB TYPE STANDARD TABLE OF FI_TY,
      FT_ITAB TYPE STANDARD TABLE OF FT_TY,
      FTY_ITAB TYPE STANDARD TABLE OF FT_TY,
      FTY1_ITAB TYPE STANDARD TABLE OF FT_TY.
DATA:PH_WA LIKE LINE OF PH_ITAB,
     PO_WA LIKE LINE OF PO_ITAB,
     VO_WA LIKE LINE OF VO_ITAB,
     FI_WA LIKE LINE OF FI_ITAB,
     FT_WA LIKE LINE OF FT_ITAB,
     FT_WA1 LIKE LINE OF FT_ITAB,
     FTY_WA LIKE LINE OF FT_ITAB,
     FTY1_WA LIKE LINE OF FT_ITAB.
SELECT A~EBELN
       A~AEDAT
       A~LIFNR
       A~ZTERM
       A~EKORG
       A~WAERS
       A~SUBMI
       A~INCO1
       B~EBELN
       B~EBELP
       B~BRTWR
       B~KTMNG
       B~NETPR
       INTO TABLE PH_ITAB FROM EKKO AS A
       INNER JOIN EKPO AS B
       ON AEBELN = BEBELN
       UP TO 25 ROWS.
CHECK PH_ITAB[] IS NOT INITIAL.
SELECT LIFNR
       NAME1
       FROM LFA1 INTO TABLE VO_ITAB
       FOR ALL ENTRIES IN PH_ITAB
       WHERE LIFNR = PH_ITAB-PH_LIFNR.
CHECK VO_ITAB[] IS NOT INITIAL.
SORT PH_ITAB BY PH_EBELN.
SORT VO_ITAB BY VO_LIFNR.
LOOP AT PH_ITAB INTO PH_WA.
FI_WA-SUBMI = PH_WA-PH_SUBMI.
FI_WA-EBELN = PH_WA-PH_EBELN.
FI_WA-ZTERM = PH_WA-PH_ZTERM.
FI_WA-INCO1 = PH_WA-PH_INCO1.
FI_WA-WAERS = PH_WA-PH_WAERS.
FI_WA-EBELP = PH_WA-PO_EBELP.
FI_WA-BRTWR = PH_WA-PO_BRTWR.
FI_WA-KTMNG = PH_WA-PO_KTMNG.
FI_WA-NETPR = PH_WA-PO_NETPR.
READ TABLE VO_ITAB INTO VO_WA WITH KEY VO_LIFNR = PH_WA-PH_LIFNR BINARY SEARCH.
FI_WA-NAME1 = VO_WA-VO_NAME1.
APPEND FI_WA TO FI_ITAB.
CLEAR FI_WA.
ENDLOOP.
LOOP AT FI_ITAB INTO FI_WA.
    FT_WA-EBELN = FI_WA-EBELN.
    FT_WA-EBELP = FI_WA-EBELP.
    FT_WA-NAME1 = FI_WA-NAME1.
    FT_WA-ZTERM = FI_WA-ZTERM.
    FT_WA-INCO1 = FI_WA-INCO1.
    FT_WA-WAERS = FI_WA-WAERS.
    FT_WA-SUBMI = FI_WA-SUBMI.
    FT_WA-BRTWR = FI_WA-BRTWR.
    FT_WA-KTMNG = FI_WA-KTMNG.
    FT_WA-NETPR = FI_WA-NETPR.
APPEND FT_WA TO FT_ITAB.
CLEAR FT_WA.
ENDLOOP.
LOOP AT FT_ITAB INTO FT_WA.
AT END OF EBELN.
SUM.
    FTY_WA-EBELN = FT_WA-EBELN.
    FTY_WA-EBELP = FT_WA-EBELP.
    FTY_WA-NAME1 = FT_WA-NAME1.
    FTY_WA-ZTERM = FT_WA-ZTERM.
    FTY_WA-INCO1 = FT_WA-INCO1.
    FTY_WA-WAERS = FT_WA-WAERS.
    FTY_WA-SUBMI = FT_WA-SUBMI.
    FTY_WA-BRTWR = FT_WA-BRTWR + FTY_WA-BRTWR.
    FTY_WA-KTMNG = FT_WA-KTMNG + FTY_WA-KTMNG.
    FTY_WA-NETPR = FT_WA-NETPR + FTY_WA-KTMNG.
ENDAT.
   APPEND FTY_WA TO FTY_ITAB.
   CLEAR FTY_WA.
ENDLOOP.
WA-SELTEXT_L = 'ebeln'.
WA-COL_POS = '1'.
WA-FIELDNAME = 'EBELN'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '15'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'SUBMI'.
WA-COL_POS = '2'.
WA-FIELDNAME = 'SUBMI'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '15'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'NAME1'.
WA-COL_POS = '3'.
WA-FIELDNAME = 'NAME1'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '15'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'ZTERM'.
WA-COL_POS = '4'.
WA-FIELDNAME = 'ZTERM'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '15'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'INCO1'.
WA-COL_POS = '5'.
WA-FIELDNAME = 'INCO1'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '15'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'WAERS'.
WA-COL_POS = '6'.
WA-FIELDNAME = 'WAERS'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '15'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'brtwr'.
WA-COL_POS = '7'.
WA-FIELDNAME = 'BRTWR'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '20'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'netpr'.
WA-COL_POS = '8'.
WA-FIELDNAME = 'NETPR'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '20'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'ktmng'.
WA-COL_POS = '9'.
WA-FIELDNAME = 'KTMNG'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '20'.
APPEND WA TO HEADER.
CLEAR WA.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM = SY-REPID
    IT_FIELDCAT        = header[]
TABLES
    T_OUTTAB           = FTY_ITAB[].
IF SY-SUBRC = 0.
ENDIF.

Excelicon is not being displayed in the alv output

Hi,
iam using the standard tool bar, yet the excel icon is not being displayed in alv ouput.and also in the menubar list export the spreadsheet option is gr

OSS# 1140542?
or you may search other.
Edited by: Amit Gujargoud on Nov 3, 2008 3:10 AM

Date not being displayed in the custom format

Hi ,
I have a problem wherein i am unable to change the format of the date.
I need the date to be in the format 'January 10,2010.' however the date is being displayed as '1/10/10'. I have tried all options for the date formatting. I specified the custom format as 'MMMM D,YYYY' as mentioned in the SAP Library. I am trying to use the std custom options like YYYY-MM-DD, the date is not being dispalyed in the custom format provided by SAP either.
I have binded date from the context, used the Current Date field provided by SAP. Nothing works.
Its not working on the new form. However the old forms have the same kind of formatting and are being displayed as desired.
Please suggest as to what the issue could be.
Thanks,
Soumya.

Hi All,
Even I'm encountering the same issue. I'm trying to control the outputted date format programmatically.Please have a look.
data: v_int_date like sy-datum,
v_ext_date(10).
v_int_date = '20110201'
write v_int_date to v_ext_date MM/DD/YYYY.
Here I've tried to convert the date to external format using a fixed format(MM/DD/YYYY). But still it's getting outputted in the format DD/MM/YYYY only as that's the way its defined in the User Master!
Is there any solution for this? How can I 'override' defaults in the SAP User Master?
Thanks,
Mahesh

Run data not being displayed in the data view tab following a run

Recently I had some engineerings troubleshooting an issue with our test setup and since then, they run data is not automatically displayed in the dataview tab. I am now having to drag it over from the project documentation tab. I am sure there is a quick fix. What is it? Also, how can I password protect to prevent this type of issue in the future?

Benbrax wrote:
Recently I had some engineerings troubleshooting an issue with our test setup and since then, they run data is not automatically displayed in the dataview tab. I am now having to drag it over from the project documentation tab. I am sure there is a quick fix. What is it? Also, how can I password protect to prevent this type of issue in the future?
So they changed something? You don't have a backup of the software, nor any kind of software control? Where I work, you can't even run modified code on a production unit, else you just created an expensive "engineering unit." Could be they deleted just one data wire and it may take you hours to find it.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Column value not being saved to the database

I have an app I am developing in HTML DB. I added a column to my database table so I then went and added an item to my form and made the source the database and gave it the column name. However, when I populate this item it will not save the value to the database. It is saving all the other items. We have hit this issue in the past, and if we delete the item and add it again it will work but that is not the case for me this time.
I have compared this 6 way to Sunday to ensure I have it setup like all others. I have no typo in the column name cause I cut and paste from a describe after a few failed attempts at getting this to work.
I am able to get the report screen of this app to display the column.
Anyone come across this and have a workaround? Note, there are no errors, it just won't save the value for some reason.

anonymous - What is the column datatype? I suggest you install the application into your workspace on htmldb.oracle.com (and create the table in your application schema). Let us know the workspace name and application ID so we can take a look. Also, always give the version of the product you are using.
And we'd like to see your first name.
Scott

How to pass values to be displayed on the report?

I have an ASP.Net page that has values from the user that needs to be displayed in the page header of the report. Those values need to be passed to the report.
I am using Crystal Reports 2011. The code behind for ASP.Net page is written in VB.Net.
I had thought of using Parameter fields in the report and using the SetParameterValue method of ReportDocument but I am not familiar with using Parameter fields.
How to set up the report to do this?
Sincerely,
Keith Jackson

Hi Keith
DJ has some very good suggestions, but the first thing we want to do is to make sure the report works in the designer as you want it to. Reading this thread, I'm a bit unsure if the report does actually work in the designer - can you please comment on that?
If it does, I like to go from simple as far as coding is concerned. In this case, that would mean not worrying about the parameters or logon and let the report engine do the heavy lifting for us:
Create a new project. Throw a CR viewer on a form and add one line of code in page load:
CrystalReportViewer1.ReportSource = <path to the report>
The engine will prompt for the db logon as well as the parameters. Fill those out. The report should then display on the screen.
From here we can get fancy and add DB logon code as well as the parameter code.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

The expression is not being displayed in the alert inbox

Hi,
I have created an expression in 'Long and Short Text' tab present in the ALRTCATDEF transaction screen.
The expression is "test Error in message &SXMS_MSG_GUID&". However if i goto alert inbox, this expression is not getting displayed. I tried putting this expression under Message title, Short text and Long text tabs. But no change in the result.
In the above expression, SXMS_MSG_GUID is a container variable declared in ALRTCATDEF transaction screen.
Same is the situation irrespective of the container variable being used - SXMS_ERROR_CAT etc.,
I appreciate your early response.
Regards
Ganesh

Hi Venkat,
Without using BPM, you can think/try out with triggering an alert from UDF:
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Otherwise, you can use email functionality to notify the error message rather an alert....so that you can customize your output format/or error message required.
Also check out this Michal's blog on ALERT Configuration..
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Hope this wull help.
Nilesh

Plan values not being displayed in the report ..

Similar Messages

Maybe you are looking for