Plan Version defaults to ". :"

Hi All
Plan Version is set to 01 in Table T77S0. when I create a new org unit or position via ppome or pp01, it shows up the plan version as 01 Active
but when i check the table HRP1000 the same org unit or position shows plan version as .:.
I also did the report RHOBJCH in tc SE38. there is still no difference. Do I have to create all Org units once again after this report is run and reconciled?
Can you please help me find why this is so..
Edited by: SAP HR Infant on May 12, 2008 5:17 PM

My question has been answered at work,  Thanks

Similar Messages

  • User Exit in APO to change Planning version defaults

    Hi,
    Is there any user exit/BADI I can use to User Exit in APO to change Planning version defaults.
    Regards,
    Tarun

    Hi Emmanuel,
    I am searching for this exit in APO-DP.I have a requirement where we CIF master data (location) from SAP R/3 to SAP APO.However the location are saved in default planning version/model ( ie 000) I need to save these locations in another planning version and I am looking for an appopriate user exit/BADI which can accomplish this.
    Regards,
    Tarun

  • Setting plan version as default

    Dear Expert,
    How to setting 'plan version', for example: plan version 1 as default in tcode :
    s_alr_87013613 (Plan/Actual comparison)?
    What is the effect to others reports then?
    Thanks in advance.

    The variable that is used in this report is 1VERP. You can changed this via GS12 to enter the whatever plan version to default under the default value. For your information, the report group 1AIP is run when you run the t-code S_ALRr_87013613, which inturn runs the report 1AIP-001 that incorporate the variable 1VERP under the plan data for version selection.
    But this may not be the best practise, because you will be changing the SAP standard, which will be overwritten when you upload support packages or do an upgrade. Better you copy this report and use your own version variable, by copying the 1VERP.

  • Defaulting CO plan versions specific to cost plan method.

    Hi Experts
    I wish to have dedicated CO plan versions as shown below:
    Z01: Overal planning
    Z02: Detailed planning
    Z03: Unit cost planning
    Z04: ECP
    For ECP,  the CO plan version can be defauled. Similarly is there any provision to default the specific CO plan versions for the remaining cost plan methods?
    This helps in preventing the selection of inappropriate version. And also provides clarity that the version it self indicates the cost plan method.
    Request experts to comment.
    warm regards
    ramSiva

    Dear Prasad
    Thanks for prompt response, Is there any impact if we create new version ? Is there any SAP suggested documentation
    Kindly revert
    Regards
    Anilkumar

  • Actuals in Plan Version 0

    Can someone explain to me what SAP means by 'actuals' in plan version 0?  Is this supposed to mean that the actual postings to a cost center (for example) are copied into this version?  This would mean that after a month is closed, the actuals would equal plan?
    Thanks in advance

    Plan and actual transactions are stored in a single table. For planning, version is one of the essential characteristics, against which the plan values are stored. Though this version does not mean much to actuals, SAP has made it to default to version '0', you can choose any other version also to record actuals against that version. But only one version can be chosen to record the actuals.
    Once you have set in the customizing which version shall be activated for the actuals, you never visit that again. It matters only when a report is being developed where you have to call the plan version and enter 0 against that for pulling actuals.
    Actual do not become plan because a version is being asked by the system.

  • Tcode KEFC and message:"Plan version is not supported"

    Hello all,
    Please is someone aware of solution for this situation:
    - I upload with tcode KEFC forecast datas from excel file in CO-PA
    - receiver records are created with errors
    - when I check for the errors system tells me that "Plan version is not supported, diagnosis : Plan version "0" has not been created in operating concern "1000", Procedure: Transfer version "0" to operating concern "1000" and maintain the attrributes for that version"
    - my concern is that when I check in customizing Planning, Initial Step: display view settings in operating concern details the version "0" is existingin the operati,ng concern "1000"
    So do you have a solution for this issue?
    Thanks and best regards
    JCO

    Hi Sudhakar,
    Thanks for answer but version "0" is tickled for Plan Actual, WIP and variance and I don't understand what to do about KEPM.
    Best regards
    JCO

  • Diff: Version on workflow builder and Maintain Active Plan version on SWU3

    Group,
    Can any one help me to understand the Version on workflow builder and Maintain Active Plan version on SWU3
    Thanks in advance !
    Richard A

    Dear Richard Antony,
    The Versioning in the Workflow is very important its some what simmilar to the version on any SAP Objets like Tables, Program etc.
    Here Suppose any change comes in working workflow, then in stead of directly change them you can create a version of them and them modify it. So that you can reverst back to that version if required.
    Like wise there is lots of importance of versioning Workflow.
    The Active Plan version is also important to establish at SWU3. As all the Workflow is using Organization management which is very depended on the Active Plan version. so based on which Plan version you want to use you can Provide in SWU3 to tell Workflow system to use this.
    Hope this will give you a clear picture.
    Regards,
    Chandrashekhar.

  • "Open in Smart View" option. Hyperion Planning version 11.1.1.3

    Failure to download planning form to Smart View using the "Open in Smart View" option. Hyperion Planning version 11.1.1.3. Error message "Web launch operation has been cancelled.
    Your feedback is appreciated.

    I understand you are on 11.1.1.3.
    However, this is documented in the Known Issues section of the Smart View 11.1.2.1 readme and could be worth a try: 
    When you try to open a Planning web form in Smart View through Workspace, you may get this error: “Web launch operation has been cancelled.” This happens if Essbase has not been added as a server in Shared Connections. Workaround: Open the Smart View Panel in Smart View and add an Essbase server as described in the online help or "Adding Essbase Servers" in chapter 2 of the Smart View User's Guide. 
    HTH-
    Jasmine.

  • Actual and Plan Versions annual view - Multiple versions per company code

    Good Day,
    Iu2019m creating an FI-CO query with an annual view of both Actuals and Plan Values, which uses period and version as input values. The dilemma is around the plan versions which are hardcoded per company codes (eg. 1 Company Code = versions 501 u2013 512)
    Can anyone suggest a possible solutions as normally there is only one version used for planning but in this instance there are multiple versions per Company Code.
    Currently the report is hardcoded for one Company Code and going forward it should cater for more than one(Company Company* 12 Version)
    Kind Regards

    Remove restriction on comp code. There could be 2 models.
    1. Include comp code, value type and version in the rows. This way you get multiple records for a comp code. One record for actual data and one record each for plan versions. To have this model at the query, the data model in the cube also should be in this way (what we call as the account model), multiple records differentiated into actual/plan by valuetype and different versions by version.
    2. Include comp code in rows. Create selections, one for actuals (restrict with key fig and value type 10, actuals), one for each plan versions (restrict key fig with value type 20, version 501. Create one selection for each version this way). This way we have one record per comp code with diff key fig for actual and plan versions. We call this as key fig model. To have this model at the query, the data model in the cube could be account model or key fig model. If it is key fig model then no need of selections. The key fig could be taken directly from the cube.

  • Error While Deleting Planning Version

    Hello to all!
    We have problem with deleting planning versions:
    1. When i try to delete planning version, i recieve ABAP Dump with CONNE_IMPORT_WRONG_OBJECT_TYPE so i can't delete any planning versions in my system
    2.Then when i try to access properties of plannining version appers the message that liveCache is not avaliable
    3. In addition when i try to delete whole model it deletes it but when i refresh the screen i see model which i have already deleted
    Please help me to solve this problems.
    Thanks in advance!!

    Hello Brian!
    Look through  this note https://service.sap.com/sap/support/notes/781817
    You should delete variant in transaction SE38 (but i dont remember what variant (but this is one of the variant in this note) exactly you should delete so try it yourself.)
    Also it maybe useful to look through this note https://service.sap.com/sap/support/notes/752838

  • Inspection lot creation based on "right" inspection plan version

    I manage inspection plan ( inspection lot origin 01 ) with Change number; in this way I have differents inspection plan version based on date.
    When I do a Good Entry based on purchase order , I need that system creates inspection lot version based on the purchase order creation date and not , as now, based on good entry date
    Is it possible ?
    When I create the purchase order I send to vendor also the inspection plan characteristich that have to be maintened ; for this reason I need to find same characterist during good entry inspection
    Regards
    Silly

    You need to use one of the enhancements that Do-Wook has suggested.  There is no standard SAP way to suppress the inspection based on the vendor batch number.
    With the first enhancement you use the system to check for a previously received vendor batch and if one is found, then that batch number is proposed and not the next one from the numbering series.  In this case, the lot isn't created than due to the inspection lot control of the inspection type.
    With the second enhancement you check the vendor batch number and if it's been received you suppress the inspection lot creation and the stock goes right to unrestricted.
    You'll probably need to do one or the other.  Myself, I prefer the first enhancement.
    Craig

  • Error during creation of  Planning Version in SAP - ICH

    Hi All,
    I'm working on SAP-ICH, in that i tried to create planning version after creating the planning model but the system is giving information " General error in model/planning version management " . Could you please tell me the reason why this is happening and how to rectify the problem.
    Thanking U all in advance.
    Yashu Vyas.

    Hi Vashu
      My name is Vinod Tiwari.I am a SAP Technical Consultant with 4 years of exp in ABAP.Now i have a interest in SCM ICH 5.0.Could you pls guide me whats the way to start learning this.
    Mo mobile no is +919899119182.
    u can mail me ur valuable suggestion on my mailid [email protected]
    Waiting for your reply.
    Thanks and Regards
    Vinod Tiwari

  • Want to copy actual data to plan version for profit & cost center

    Hi,
    I want to copy data from actual to plan data for first half of the financial year.
    I was trying with T-Code CP98 . Are any Configration settings required to be done?
    But facing error "you have not selected a traget project" 
    Is there any other way out for doing these activity?
    Thanks & Regards,
    Mayur
    Edited by: Mayur on Feb 23, 2010 11:56 AM

    Hello Mayur,
    Please try with KP97/KP98 transactions.
    I suspect, that you are giving wrong target plan version.
    Please check your entries once again.
    Regards,
    Praisty
    Edited by: Praisty on Feb 23, 2010 12:04 PM

  • "no active plan version exists" while adding system in partner profile

    Hi,
    i am getting "no active plan version exists" while adding logical system in partner profile. while duble click on this it showing "set active plan version".
    Can anyone answer me how to do the set active plan version. I asked my functional team and  they didnt know how to set it.
    Thanks,
    Gowthaman.

    Thanks Sonia,
    in OOAP i could not able to edit so i maintained plan version in OOPV and in sm30 in table T77S0 maintained PLOGI group.
    Now i am getting different error while creating partner profile in we20..
    *Object type US, ID CENTRALADMIN unknown (please observe upper/lower case)*
        *Message no. E0624*
    *Diagnosis*
        *Object CENTRALADMIN of type US is not known in the system.*
    *Procedure*
        *Enter a valid object and check the type.*
        *Make sure upper case and lower case are used correctly.*

  • What is the significance of plan version?

    Hi all,
    Pls tell what is the significance of plan version? What will happen if I create some orgunit oin current plan and some org unit in another plan?

    Hi..,
    Plan versions are scenarios in which you can create organizational plans.
    ==>In the plan version which you have flagged as the active plan version, you create your current valid organizational plan. This is also the integration plan version which will be used if integration with Personnel Administration is active.
    ==>You use additional plan versions to create additional organizational plans as planning scenarios.
    But Only one plan version will be active at any time !!!
    As a rule, a plan version contains one organizational structure, that is, one root organizational unit. It is, however, possible to create more than one root organizational unit, that is more than one organizational structure in a plan version.
    For more information on creating plan versions, see the Implementation Guide (IMG), under Personnel Management ® Global Settings in Personnel Management ® Plan Version Maintenance.
    regards,
    sai ramesh

Maybe you are looking for